Re: NB10-A-110 PU143E - Win 8 installation - how to change UEFI mode
I have preinstalled win 8 and want to put win 7, but I see where to change the UEFI bios.
NB10-A-110 - PU143E
Hi
You have to update the BIOS.
Then the UEFI /CSM mode should be visible in the BIOS and you should be able to change it.
Similar Messages
-
Satellite NB10T: Want to install Win 7 but can't change UEFI mode to CSM
Hello
I know it isnt the best section to post, but there is no sub forum for my computer serie (Satellite NB10T) and this problem is linked with Win 8
I'm stuck at the moment: I disentailed win 8 because I want to come back to 7
I'm aware of
http://aps2.toshiba-tro.de/kb0/TSB2C03F80002R01.htm
The problem is that I don't have Boot mode option under advanced- system configuration; the only thing I can do is enabling or disabling secure boot mode in the security tab, which is not enough
I also added a supervisor password; it does add a clear secure boot keys option, but still nothing under advanced tab to switch to Csm.
Clearing keys does not work too.
I tried to boot multiples linux distro and win7 on bootable usb (theses work on others computers), but no luck. Boot order set to usb first of course).
What can I do?
Edit : will put some picture of uefiHi guys
I think the +problem+ (to be honest its not an problem but feature) is the newest Intel chip standard called *Baytrail.*
+Intel Baytrail+ is the newest kind of chip designed especially for mobile (tablet) usage.
As far as I know such chips support only the UEFI capable devices and systems (Win 8, Win 8.1) and therefore the UEFI / CSM boot mode option isnt available in the BIOS settings.
This Satellite NB10T was equipped with such Intel Baytrail chip and therefore this option is missing. -
Would like to install Win 7 on Satellite C in UEFI mode
Hello
I would like to install Windows 7 64bit instead of 64bit Windows 8 creates too much trouble.
I saw that there how to install:
1 - BIOS Mode
2 - UEFI MODE
I would like to install in UEFI mode and enjoy this mode.
But when I boot my PC by pressing F12, I do not have UEFI option for my DVD player:
UEFI: HL-DT-ST-DVDRAM GT51N
Do you have a specific tutorial for TOSHIBA to reinstall Windows 7 in this mode?
thank you
Regards
+Message was translated by google translator+wrong
It is possible to install Windows 7 in UEFI mode dice when it is a 64-bit version of
If we go back to standard BIOS mode to install Windows 7 that can do because the GPT partition is not in MBR.
I followed this procedure but when I validate the DVD player that will read out the bootable DVD WIndows 7 but it puts puts FAIL!!
http://lecrabeinfo.net/installer-la-version-uefi-de-windows-vista-7-ou-8.html
I want to keep the benefits of UEFI roles and not just convert MBR ...
thank you
+Message was translated by google translator+ -
CS5 Installation - how to change shortcut location
Using the Adobe Application Manager Enterprise Edition for automating the CS5 packag
e deployment is used and works fine. But I need to change the location of the shortcuts. Don't know how to do that, installing into the root of ProgramMenu Folder needs to be customised for each product and subproduct. Any Idea?Edit the install.db file for each package.
eg, for Photoshop, it is located in \Build\Setup\payloads\AdobePhotoshop12-Core.
The table containing shortcut details is "CreateLocAlias" and the field name is "directory"
Or you can use a custom action (VBScript or similar) at the end of the installation, whichever method you prefer. -
Keymap during installation : how to change ?
Hello I browsed through the forum a little bit and I saw that few people didnt know that it is possible to switch the keymap at the beginning of the Arch installation process. :shock:
Here is how to do that :
when you are prompted to, type at the very beginning :
loaddisk /dev/whatever_cdrom_drive
cd /tmp/addons/kbd/i386/azerty
loadkeys whatever_key_map.map.gz
Easy, eh ?Case sensitive hard drive
http://helpx.adobe.com/creative-suite/kb/error-case-sensitive-drives-supported.html -
Error 22 case sensitive volume during installation - how to change install drive?
I want to install Creative Cloud on my Mac but get the Error Code 22 for a case sensitive volume. It says I should choose a different volume to install but doesn't offer any way to choose the installation volume. How to I tell the installer to use my 2nd harddrive instead of my system drive?
Case sensitive hard drive
http://helpx.adobe.com/creative-suite/kb/error-case-sensitive-drives-supported.html -
Why can not I install iTunes on Win 7 installation appears every time the next sunrise;
service, apple mobile device,
failed to start verify that you have sufficient privileges
to start system services
Please help meThe most complete instructions for resolving the issues with the new iTunes is in the user tip: https://discussions.apple.com/docs/DOC-6562
-
Cannot recover Satellite to factory settings after Win XP installation
I was running windows recovery then I choose option "delete all data.... "something like that.
Then in the middle by mistake I turned off the system.
After I tried to started windows if was giving error "operating system missing". I manage to install WINDOWS XP so I might able to access HDD RECOVERY but nothing happened.
I tried pressing "F8" key and also "0" key when computer start at "toshiba" logo but it's still not giving me option to recover my computer back to windows vista or you can say "out of box state".
One Important things is, while installing windows XP its showed me that HDD recovery exists and only 973MB is free out of 5665MB. It means I still have all the windows and drivers on HDD. Now please help to recovery system back normal or OUT OF BOX STATE.> After I tried to started windows if was giving error "operating system missing". I manage to install WINDOWS XP so I might able to access HDD RECOVERY but nothing happened.
The Win XP installation has damage and deleted the boot manager and the options preinstalled by Toshiba and supported by Toshiba image.
This means that if you will not be able to recover the unit using the HDD recovery option.
You could recover the unit back to factory settings only using the Toshiba recovery disk!!! But I assume you didnt create such disk is it right?
Well, in such case you could order such disk from here:
https://backupmedia.toshiba.eu/landing.aspx
Greets -
I have Win 7 saved (installation file) in My MacBook Pro Licence version. How can i install it on MacBook Pro. After installation how can i make it to work with Parallel desktop or VMware fusion software. I can buy these softwares.
http://www.simplehelp.net/2009/02/02/how-to-install-windows-7-in-os-x-using-para llels-desktop-a-complete-walkthrough/
http://blogs.parallels.com/consumertech/2011/10/24/install-windows-right-from-wi thin-parallels-desktop-7-guest.html -
Win XP installation failure on MEGA 865 PRO
I'm fighting with my MEGA 865pro, Celeron D 341,2x256 RAM, HDD Maxtor 200GB SATA , DVD-RW LG.
Everything went ok up to the XP installation, i.e. I installed instant-On on an empty disk (it runs and works). Then I boot a Win XP install CD, and it hangs a second after displaying the initial message: "..detecting hardware....". The HDD access led stays on. The same for XP SP1 and SP2. Any BIOS tweaking does not help.
After XX tries, I found out the SATA HDD is the bad guy, as the XP setup goes ok if I use my old ATA disk, or even if I use both the SATA and the ATA disks.
Interestingly, Win 2000 installs *without any problems* (but then InstantOn does not boot)!!! Gentoo and Ubuntu linux work as well.
I'm trying to install the absolutely standard and ("only") recommended configuration, so what ... :(
I've seen few posts about this here and there (e.g. https://forum-en.msi.com/index.php?topic=85690.msg616103#msg616103), but no solutions so far :((((
Thanx
vizDunno if you allready did, but you need to have the latest BIOS to run Win XP SP2 on the MEGA 865 Pro. When i bought mine, Sp2 wasn't out yet and things worked fine. When i tried installing SP2, everything went fine, untill i boot. Black screen and nothing, after a while MSI released a new BIOS fixing the problem, newest BIOS i think is 1.30
Mosher -
DeskJet 932C and Win 7 installation problems
I recently upgraded my Win XP system to Win 7. In so doing I first re-formatted the XP system in order to correct problems with it before upgrading. Now I cannot get Win 7 to find the driver. It recognizes that the printer is connected but that there is a problem. I tried inserting the original CD but it won't recognize that either. I have read all the "solutions" on the HP pages and none of them work.
I know the 932 is compatible with Win 7 because it is working fine on my laptop which runs Win 7. How can I get the system to recognize and download the driver?Thanks for the suggestions Dave,
I found a solution
The DVD I was using worked on HP NC2400, no problems, I found another OEM DVD with 64 Bit Windows 7 and it installed flawlessy.
Thanks again Dave
Slan / Ed -
I own CS6. I just built a new computer with Win-7. How do I change to the 64 bit version and install on the new computer?
Lancedownload the installation file(s) and activate with your serial number,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.< -
The installer found unexpected changes to the install script
Hi,
I've just try to install PC Client 15.7 "EBF 23439: 15.7 SP130" Just downloded from Service Market Place on a Win 03 R2 32 bit and on Windows 12 R2 64 bit
On Win 03 R3 32 bit it works fine but in Win 12 R2 there isen0t any way to run Sybase Central.
When I try to uninstall, on each machine, there are only thi message:
Unable to lunch installer
The installer found unexpected changes to the install script:Hi,
So you are saying that PC-Client 15.7 SP130 doesn't uninstall? I will look into this.
If you go to your control panel and installed software.
What version(s) of Microsoft Studio do you have installed?
What versions of Microsoft Visual C++ #### Redistributable Packages do you have?
From what I saw they had pulled the Sybase Central out of PC-Client.
You might be able to get from ASE 15.5 version of PC-Client.
Please note that PC-Client with Sybase Central was never certified with Windows 8 or 2012. So you never get Sybase Central to work on those operating systems.
PC-Client 15.5 last drop should have been certified with Windows 7.
Thanks,
Dawn Kim -
I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open? Next in Elements 11, how do I load and print different pictures and different sizes options on the same page?
Thanks,
Shirsbmgrams wrote:
I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open?
See here:
Reading PhotoDeluxe PDD Files -
How to change win 7 k to english in my ideapad s10-3
recently i bought a lenovo ideapad s10-3 netbook from korea( but i am not korean originally ), it is all good but there is created one problem for me that while i first opened it, at that time i all changed its language and place to us english and us, but it didn't appear in english when it went inside it came in korean language which i don't understand , so plzzzz help me
1. how to change it in english version?
2. is it possible to change without going to its service centre?
3. should i pay money for it?
4. can i do it directly from internet?
5. how long does it take?
plz reply me as soon as possible , i'm unable to use my ideapad s10-3 netbook until you help meunless you have the ultimate and enterprise version of the win 7, then you can't change the menu system language, without having to purchase an English edition of the win 7 OS.
You will have to purchase a separate retail copy of Win 7 to install on your ideapad.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft
Maybe you are looking for
-
Unable to be productive on IPAD may i have my money back
Unable to add & delete files lost 2000 pics nothing is working on Ipad 2 after this last upgrade, 125K an hour for the time wasted with this piece of crap, contatc me to make payment. Moving to the android tablet, after 3 years screw you apple. pay m
-
I hope this makes sence i want to add to the 3 layers already there, can i do this, seems a little odd theres only three. HELP! Cheers
-
I purchased a movie on my mac and now I am trying to download it on my iPad. When I go to do it, it doesnt show me the cloud icon, itonly shows the first 3 letters of download...
-
I deleted "preview" by an accident. how do i get it back?
i deleted "preview" by an accident. how do i get it back? i deleted it completly off of my computer, so its not eve in the trash.
-
anyone know why when I downloaded the latest version of itunes it had a 1607 runtime error code ---now I cannot use itunes at all.