Re: NB510-10D and NB510-11- what are the differences?
Dear all,
Does anybody know whats the difference between the NB510-10D and NB510-11, theyre being sold here in Spain at the same price and Im seeing no differences in Specificaciones.
Could anybody advice please?
Regards
I found some details about the NB510-10D which are:
ATOM N2600 (1.60GHZ) 800MHZ
Intel NM10 Express Chipset
320GB (5400RPM) SATA
Intel GMA 3150 graphic card
1GB DDR3 (800MHZ) RAM
The Nb510-11 is not known to me I assume you one letter or number is missing in the model number.
But to be honest, I guess there should not be a big difference
Similar Messages
-
Xcompmgr and cairo compmgr, what are the differences?
Only difference I see is one have gui other does not.
Awebb wrote:One can use 3D acceleration of your GPU, the other cannot :-)
Actually, both can. Do you think xrender acceleration is not happening on the 3d engine of your GPU? Do you think your graphic card even still has a 2d engine?
@Kjonat: xcompmgr uses xrender, cairo-compmgr can use either xrender or opengl. Though last time I tried, cairo-compmgr was buggy as hell, to the point of being unusable. And if you go the xcompmgr route, I'd actually advise to go with dcompmgr from AUR. It's a fork by one of the openbox developers, it has a few additional features and bugfixes.
Last edited by Gusar (2011-07-14 20:31:14) -
What are the difference within Iphone 4 and 4S????
Im wanna buy an Iphone, and wanna know what are the difference within the Iphone 4 and the 4S. Somebody can help me?
Check this out
http://en.wikipedia.org/wiki/Iphone -
What are the differences between ECC5.0 and 6.0 new GL functionality
Hi Experts,
What are the differences between ECC5.0 and 6.0 new GL functionality.
If we want to implement IFRS, I think New GL functionality is very helpful, but why sap is recommending only for ECC6.0 new GL functionality, Eventhough this functionality is available in ECC5.0.
Best Regards,
DharaniDear,
ECC 5.0 vs. ECC 6.0/SAP ERP 6.0
Functionality not available in the new G/L with mySAP ERP 2004 and ERP Central Component (ECC) 5.0:
Transfer prices
Statistical key figures
Euro translation
Audit Information System (AIS)
Archiving
Data retention tool
Regards,
Chintan Joshi. -
What are the difference in transaction codes in 4.6 C and ECC 6.0 HCM syste
Hi
What are the difference in transaction codes in 4.6 C and ECC 6.0 in HCM SAP.
Regards,
SanjayBelieve there will not be any change in Tcodes.
check these links
http://solutionbrowser.erp.sap.fmpmedia.com/
http://www.sap.com/solutions/business-suite/erp/pdf/BWP_ERP2006_Upgrade.pdf
http://service.sap.com/releasenotes
http://service.sap.com/upgrade for functional
https://websmp105.sap-ag.de/upgrade -
Under Option Summary, the usage includes AUDIO, PHOTOS, APPS and OTHERS. What are the things included in OTHERS? It is using up my storage space. Can someone please help?
To add to Nick's comments, "Other" is typically approximately 1 gigabyte. Occasionally for some users, it gets much (many times) bigger because they have some corrupt files. If that's the case, it's best to restore the iPhone.
Plug the iPhone into (current) iTunes, let it sync, then choose "Restore" on the right. If restoring from the iPhone backup does not help, then restore (again) as new and then manaully sync the iPhone. -
There are many jre exe files: what are the differences and which I choose?
Having some problems, that I will describe in another message, I was looking for the latest jre.
I saw that on www.java.com there is 6 update 1, whereas on www.sun.com there is already 6 update 2. So, I would like to know when an update is made available on www.java.com and through automatic updates?
Also, I saw different names, and I would like to understand in an exact way what are the differences:
jre-6-windows-i586.exe;
jre-6-windows-i586-iftw.exe;
jre-6u1-windows-i586-p-s.exe;
jre-6u1-windows-i586-p-iftw.exe;
jre-6u2-windows-i586-p.exe;
jre-6u2-windows-i586-p-iftw.exe;
I understand that te iftw part means the it is a small download, only the setup module. But why there are some files that end with "-p", some with "-p-s", sm with "-i586"?
Thank You
Rodolfo GiovanninettiThe question mark icon on the dlls indicates that LabVIEW is unsure of
the location of the DLL, or is unable to locate the DLL on your
system. This can happen if the DLLs do not exist, or if the "Call
Library Function Node" just specifies the name of the dll, and not the
entire path to the dll. IVI and Instrument driver VIs will
typically not supply the entire path to the DLL, whch would cause the
question mark icon to appear.
If your application is working properly, then you should ignore the
question mark in the dependencies list. If your application is
broken because the DLLs cannot be found, they are installed with the
following drivers:
ivi.dll is installed with the IVI compliance package, which is available at the following link:
Drivers and Updates: IVI Compliance Package
You should also install the latest version of NI-VISA, which is required by the IVI Compliance Package:
Drivers and Updates: NI-VISA
ag3325b_32.dll is installed with the your instrument's IVI driver, which can be found below:
Agilent 3325b Instrument Driver
Jason S.
Applications Engineer
National Instruments -
What are the differences between iPod 2nd and 3rd Generation models?
Hi:
I have a couple questions about the differences between some of the iPod Touch models:
1) What is the difference between the *2nd Gen 8GB iPod touch* and the *3rd Gen 8GB iPod touch?*
2) What are the differences among the *3rd Gen iPod Touch 8GB* model and the *32 GB and 64 GB models* (other than the memory differences)?
Thanks!rebello95 wrote:
1) What is the difference between the *2nd Gen 8GB iPod touch* and the *3rd Gen 8GB iPod touch?*
none, really.
2) What are the differences among the *3rd Gen iPod Touch 8GB* model and the *32 GB and 64 GB models* (other than the memory differences)?
the 32 & 64 GB models have advanced hardware components. 32GB and 64GB Touches gain 3GS specs - roughly 2x faster, with more advanced 3D graphics for games that capitalize on OpenGL 2.0 - and features like Voice Control.
JGG
edited by the Jolly Green Giant (where Green stands for environmentally friendly) -
What are the differences between ESB 10g and OSB 10g
Hi,
I'm newbie to OSB 10g. I have installed OSB 10g.
I came to know after Oracle acquired BEA, the ALSB is renamed as OSB.
I'm curious to know what are the differences between ESB and OSB.
If there are many differences, please post any links which provide the required information in detail.
Thanks in advance.
Regards,
Udayathe 'old' esb has been renamed to mediator and is now only used as component in your sca application.
the two service buses can't really be compared since the osb (former alsb) has way more functionality in it.
Oracle gave it it's own place in his soa portfolio and the old esb can only be used als mediator in your sca application.
On top of your sca application you could use the OSB to complete your architecture design.
the difference between both.
esb (now used as mediator) can only be used in your sca application
in here you will use it mostly for routing/transformation, and there is some functionality for assign/java callouts conditional routing
the osb is complete product with a lot of functionality in it. Everything you used the old 'esb' for can be done in the OSB and with a lot of extra's.
routing/transformation/service call outs/java callouts/transport virtualization/security/and more and more
you should read the guides of the OSB to get an idea of everything it can do for you.
http://www.oracle.com/technetwork/middleware/service-bus/overview/index.html -
Pls let what are the differences between 4.7 and Ecc 6.0.
Hi all,
Could you please let me know, we are going 4.7 to Ecc 6.0.
Pls let what are the differences between 4.7 and Ecc 6.0.Try the [Solution Browser|http://solutionbrowser.erp.sap.fmpmedia.com/Default.aspx].
Regards -
What are the differences between Logos and LogosXT?
What are the differences between Logos and LogosXT?
Logos XT is a networking middle-layer maintained by the LabVIEW Network Technologies and Security group. Logos XT provides a thin layer on top of TCP/IP to simplify some common network tasks.
The underlying foundation for NI networking is called Logos.
I believe that the basic idea is Logos is what is going on behind the scenes at the base level and Logos XT lets you build your own networking protocols on top of Logos. Logos XT would be used if you want to make your own networking protocol instead of using TCP/IP or UDP.
Scott A
SSP Product Manager
National Instruments -
What are the differences between jdk and sdk
what are the differences between jdk and sdk?? thanks
Just marketing whims.
SDK = software development kit
JDK = Java development kti
Sun has use both names to refer to its SDK for Java. I forget which one they're using now, but they've switched a couple of times. -
What are the differences between Essbase and Planning?
What are the differences between Essbase and Planning?
Planning is an enterprise application built around the Essbase OLAP engine.
You can create planning applications with Essbase only, but Planning uses best practises and has built-in enterprise features.
Brian Chow -
What are the differences between trigger and constraints?
what are the differences between trigger and constraints?
Try the documentation, this would be a good starting point: How Oracle Enforces Data Integrity
C. -
What are the differences between iphone and iphone 5c 5s?
What are the differences between iphone and iphone 5c 5s?
Read here:
http://www.apple.com/iphone/compare/
The iPhone 5C is basically the original iPhone 5 in different colors.
While the 5S gets the improved hardware.
Read the link above for a feature comparison.
Maybe you are looking for
-
Application process code is not getting the value
Hi I have implemented search functionality on page 0 (One Textbox and one ImageButton). on clicking on image button I am calling a application process to redirect a page on the basis of entered value. I am using following code in application process:
-
Flash Player dosen't work anymore.
I have a mac, running OS 10.7.4 (64 bit), plus Adobe Creative Suite CS5, but can't play the TV tutorials anymore. I thought that updating my Flash Player to Version: 11.3.300.268 would resolve my problem, but it didn't. What more do I need to do, in
-
Obiee 11g . problem with set default as columnname in interaction tab
Hi Obiee gurus , I have small problem with set default option in interaction tab in column properties. actually my problem is , i changed one column bold save as set default option bold and how to revert back to my column option. when i create new an
-
How to increase the rows of a Table control on ITS
Hi, I'm trying to increase the number of rows to 20 on ITS but it always shows 2 rows per navigation. Although in the backend module pool there are 8 rows and the GV_SOS_LIST_CONTROL-LINES contains the total no of rows of the internal table. yet ther
-
Need Help:Reading Data from RU payroll cluster for table GRREC
Hi... I need help on how to read data from RU cluster table for table GRREC for the employee & run date and get the value from structure PC292 . Please let me know about the includes and the import and export statements to be used. Thanks in advance,