RE: Need Post installation Steps for solution manager4.0 on Windows/oracle

Hello,
Any body having Post installation steps for solution manager4.0 on windows/oracle. Can you please send me to my mail id. Its very helpful.
Id: [email protected]
Thanks,
Regards,
venkat reddy.

Hello Venkat,
You may get the information in SAP Note 918078 and also https://websmp206.sap-ag.de/instguides under the Solution Manager 4.0 tree.
Basically after the installation,
1. try to stop and start the SAP System
2. you need to check if you can access the SAP System.
3. Apply the permanent SAP license
4. Perform the configuration via IMG; Tcode SPRO(guide in https://websmp206.sap-ag.de/instguides)
Hope this could help you.
Regards,
AZLY

Similar Messages

Post Installation steps for Solution Manager 4.0

Hi Experts,
Please can you guide me if there are Post Installation steps for Solution Manager 4.0!If so can you explain me.I have successfully installed the SolMan 4.0.
Thanks & Regards
Sunil

Hi
In installtion guide you can find the information you needed also check
Visit for step by step details of Standard Configuration of Basic Settings
www.service.sap.com/rkt-solman->select solution Manager 7.0>technical Role-->Technolagy
&system administartion just drill out there you can find lot of simulator how to install and
configure solution manager
https://websmp109.sap-ag.de/~sapidb/011000358700000424922008E.sim
https://websmp109.sap-ag.de/~sapidb/011000358700000525622007E.sim
and for Maintenance optimizer setup
https://websmp109.sap-ag.de/~sapidb/011000358700000086852008E.sim
https://websmp109.sap-ag.de/~sapidb/011000358700000086862008E.sim
Let me know if needed more information
Regards
Uday

Post Installation steps for Solution Manager 4.0 SP10

Hi,
Can any one of you help me out to do the post installation steps to be done after installing solution manager.
Thanks in advance.
Thanks
Venu

Hi Dolores,
I am not able to find iTutor anywhere in service.sap.com/rkt-solman.
Could you please give us the perfect path for that?
Regards
Pranav

Post Installation Steps for ERP add-on Inventory Manager 4.0

Hi,
I need to confirm what are the post-installation activities we must to perfom for ERP Add-on (Inventory Manager 4.0), besides de BC Activation. I did not find any information regarding the post installation steps for the ERP Add-on of Inventory Manager 4.0 (the installation guide for IM 4.0 on service marketplace does not remark the steps only explain the theorical part of the installation)... And we need to confirm if the steps are the same of Inventory Manager 3.2 Add-on or we must do an additional step?
Best Regards,
MC
Stephen Streeter Manju Venkatesha

Yeah...of course...
I forgot to specify it.
I install the first ERP 2005 SR2 on Oracle 10.2.0.2 and the other have to be installed on the same version of DB.
All installation are not MCOD.
This mean every installation has its own DB with different SID for every installation.
And of course I have at least doubled the space required by installer. Taken from sap notes the required space for ERP 2005 SR2 is about 90 GB.
The total space of mount point is about 500 GB....
Thanks
Dan

Post installation Steps for SAP XI

Hi,
I am doing post installation steps for SAP_XI, for the step "Generating roles for SAP_XI and SAP_SLD in transaction PFCG, when I enter Role: "SAP_XI*" then its not generating any roles it is giving message "No roles found in the selected area" Please suggest
Thanks,
Nishant

Create user in SAP XI and then assign them role
Create user using SU01 transaction. Enter the username and click on the first button (create).
Follow the process below
1. Address Tab
Enter the user details
2. Logon Data Tab
Enter the initial password. Make sure user type is Dialog (it is by default).
3. Roles Tab
SAP_XI_DEVELOPER
SAP_SLD_DEVELOPER
SAP_XI_MONITOR
(if the user is admin give the admin roles)
Before logging on to the Integration Builder, logon to ABAP stack (SAPGUI frontend on windows or java) at least once. Then logon to Int.Builder components.
regards
Dharamveer

Post Installation steps for Messages archiving from Adapter engine

Hi,
Can any let me know the post installation steps for Archiving messages from AE.
We are archiving the messages from Integration Engine (BC_XMB).
This note refers to the Post installation steps... But i could not find them anywhere.
Note 790226 - Messages in AdapterEngine/PCK database do not get archived
Thanks,
Tanuj
Message was edited by:
Tanuj Kumar Bolisetty

Hi Tanuj,
have a look at note 872388
"2) For messages in the Adapter Framework: note 816022, question 8
(deletion) and
http://help.sap.com/saphelp_nw04/helpdata/en/cf/b2fc3f48ecc742e10000000a
1550b0/content.htm (archiving)"
Additionally consult the troubleshooting guide,page 110
Set the adapter service properties (note 791379)
Hope it helps
Jaime

Post installation steps for PI 7.0

Hi,
Can anybody send me the Post installation steps for PI 7.0?
Thanks in advance..
~Kumar

Hello,
 
We did PI Installation recently and version is 7.1
 
Steps are as under...
 
 1. Basic PI installation
 2. System checks after basic installation
 a. SM50
 b. SM21
 c. ST22
 d. SM12
 e. SM13
 f. SM37
 3. Unlock the 001 client for cross-client changes temporarily and set system timezone (STZAC)
 4. Change 001 client settings back to no changes allowed.
 5. Create BASIS team member accounts in ABAP Stack and assign SAP_ALL.
 6. Set directory permission for \usr\sap\trans directory on Transport Domain Controller system.
 7. Import profiles (RZ10)
 8. Add the 4 following entries in to the instance profile and restart instance(RZ10)
 a. DIR_TRANS =
hostname.domain.ext\sapmnt\trans
 b. icm/host_name_full = hostname.domain.ext
 c. login/system_client = 100
 d. icm/server_port_0 = PROT=HTTP,PORT=5<sysno>00,TIMEOUT=1800,PROCTTIMEOUT=1800 {SAP Note 1107808}
 9. Configure TMS in transport domain controller{PI DEV} (STMS)
 a. Add virtual system
 b. STMS in newly installed system and configure proper transport domain
 c. In domain controller approve the new system (STMS -> SAP system -> Approve)
 10. Get maintenance certificate and SAP license from service marketplace and apply in to the new system {ABAP and JAVA} (slicense and NWA)
 11. Kernel Update JSPM
 a. JSPM update
 b. Kernel update
 c. BC-FES-IGS update
 12. Support pack installation ABAP
 a. SPAM update
 b. Support packs update
 13. Support pack installation JAVA
 a. Apply support pack stack
 b. Apply support pack patches
 i. After JVM installation Error occurs apply MS windows KB973544 {SAP Note 1367498}
 c. Restart JSPM and continue patch installation
 14. Client copy from client 001 to X00 using profile SAP_ALL
 15. Create logical system and assign it to new client (SALE)
 16. Change UME target in JAVA to client X00.
 a. Enter URL as http://hostname.domain.ext:port/nwa
 b. Management -> Infrastructure -> Destination
 c. Logon data TAB change client to X00
 d. Restart JAVA Instance
 17. Create following users
 a. PIAFUSER, PIRWBUSER, PIISUSER, PIDIRUSER, PIREPUSER and PIAPPLUSER on the target SLD and new system manually and assign role/group SAP_SLD_CONFIGURATOR to them. {SAP Note 1309239}
 b. PISUPER in new system and assign appropriate roles in ABAP and JAVA
 c. SLD_DS_<SID> and SLD_CL_<SID> on target SLD {Use source system master password}
 d. JCoRFC_<SID> in new system
 e. Sapadm user in new system
 18. Assign roles and groups to BASIS team on JAVA Stack
 19. Create PUBLIC logon group (SMLG)
 20. Configure SLD collector job as sapadm (RZ70)
 21. Run Configuration Wizard
 a. Enter URL as http://hostname.domain.ext:port/nwa
 b. Configuration management -> Scenarios -> Configuration Wizard
 c. Select Initial Configuration and click Start.
 22. Create the JCoRFC connection.
 a. Enter URL as http://hostname.domain.ext:port
 b. Web Dynpro -> Content administrator -> Maintain JCo destination
 c. Fill in information for the following 4 entries using client X00 and JCoRFC_<SID> as the user {Make sure you note the distinction between Metadata and Model destinations when you are creating the destination}
 i. WD_ALV_METADATA_DEST
 ii. WD_ALV_MODELDATA_DEST
 iii. WD_MODELDATA_DEST
 iv. WD_RFC_METADATA_DEST
(Use dictionary Meta Data for the Metadata connections, use Application Data for the Model Data connections.)
(Use the master password for EXQ)
 23. Repeat for the remaining 3 JCo RFC destinations.
 24. Run PI Full Qualified Host Name Wizard {SAP Note: 1320707}{Make sure you check the host names for integration server and SLD}
 25. Create RFC destination in to ERP target system (SM59)
 a. Give Name PI_INTEGRATIONSERVER
 b. Connection type H
 c. In Technical settings TAB provide
 i. Target host = hostname.domain.ext
 ii. Path Prefix = /sap/xi/engine/?type=entry
 iii. User information is blank
 26. Setting SXMB_ADM ERP target system
 a. Open Integration engine configuration
 b. Goto -> Change Global Configuration Data
 c. Role of Business system = Application System {This is optional}
 d. Provide RFC destination name in Corresponding Integ. Server = dest://PI_INTEGRATIONSERVER
 27. Schedule Standard Jobs as SAPADM in client X00.
 28. SICF service to activate
 a. /default_host/sap/public/bc/pictograms
 b. /default_host/sap/public/bc/webicons
 c. /default_host/sap/public/bc/its/designs
 d. /default_host/sap/public/bc/workflow
 e. /default_host/sap/bc/ccms
 f. /default_host/sap/bc/webdynpro/sap/CTS_BROWSER
 g. /default_host/sap/bc/webflow
 h. /default_host/sap/bc/workflow
 i. /default_host/sap/bc/workflow_xml
 j. /default_host/sap/bc/xmb
 k. /default_host/sap/bc/ping
 l. /default_host/sap/xi/wsdl_sr
 m. /default_host/sap/xi/wsdl_url
 n. /sap/bc/webdynpro/sap/appl_soap_management
 29. Adjusting JNLP Heap size
 a. Open the Exchange profile through the link u201Cadministrationu201D from the web page of the Process Integration tools.
 b. Under the folder u201CIntegration Builderu201D click on the variable u201Ccom.sap.aii.ib.clientjnlp.j2se.maxheapsizeu201D
 c. Value = 1024
 d. Save the change and restart the J2EE instance of PI so that the new value can take effect.
 30. Create RFC destination for Advanced Adaptor Engine in sender ERP system(SM59)
 a. RFC Destination = AAE_<SID>
 b. Connection type = G
 c. Target Host = Host Name of AAE Server {PI Server}
 d. Service No. u2013 HTTP port number of AAE Server
 e. Path Prefix = /XISOAPAdepter/MessageServlet?ximessage=true
 f. Under Logon & Security use PIAPPLUSER with PI target systemsu2019 master password.
 31. Create RFC destination <SID>_ALE in ERP Source system with user ERQALEUSER {Make sure you have this user created in new installed system}
 32. Install External Driver Configuration in Process Integration 7.1 Using JSPM {SAP NOTE: 1138877}
 
Please let me know if I am missing anything there...
 
Cheers,
 
Yogesh

What are the post installation steps for sap 4.7ee

what are the post installation steps for sap 4.7ee

Hi,
Post installation steps are as follows.
1.SICK to be run first to checkt the errors while installation.
2. Install SAP GUI
3. Set up the TMS. Configuration the domain controller through SE06 and then set up the transport system through TMS.
4. Change the default password of SP* and DDIC.
5. Set up the operations mode using RZ04 and SM63.
6. Apply patches through SPAM.
7 Schedule default background jobs through SM36.
8 Import default profiles through RZ10.
9. Schedule backup calender through DB13.
10. Create clients using SSC4
11. Install lisence
12. Schedule SGEN

ABAP & Java Preview install done. Need Post install steps for XI.

Hi
Please excuse for the most basic question.
From the trial downloads, I've installed the
ABAP and Java and would like to know the
post-install steps for activating and configuring
the Exchange Infrastructure component and
subsequent configuration
I've installed on the local host along with the
Microsoft Loopback Adapter. What should be
the connection parameters for the Visual
Administrator?
Any help is appreciated. Thank U.
Rajendra.

Hi Rajender
I think no question is difficult or basic .The severity depends on whether you know it or not,in other terms your comfort level.
Coming back to your post:Go through the below link
https://websmp103.sap-ag.de/~sapidb/011000358700001697502004E.PDF
Re: XI INSTALLATION and POSTINSTALLATION
If you need the XI configuration guide then visit:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ac6de690-0201-0010-54ac-8923089dcc97
Any issues feel free to ask
Reward with suitable points:

POST Installation steps for SAP XI 7.0 SP06

Hi Experts ,
We are trying to install XI 7.0 SP06.We are suppose to carry out post installation
steps but we are not able to locate a proper post installation guide for the same.
We have succesfully installed XI 3.0 earlier .However XI 7.0 post installation steps in the guide that we have "SAP NetWeaver 2004s SR1 ABAP+Java on Windows: Oracle" , are relatively less...
Nevertheless, we have carried out the following steps
5.21.1 Performing PI-Specific Steps for SLD Configuration
Local and Central System Landscape Directory (SLD)
Mapping Security Role to User
1. Log on to the Visual Administrator of the J2EE engine of the SLD host.
2. Choose Cluster® Server® Services® Security Provider.
3. In the Runtime tab, choose Policy Configurations and then the column Components, and select the component
sap.com/com.sap.lcr*sld.
4. Switch to the Security Roles tab to display the assigned roles.
5. Select role LcrInstanceWriterLD.
The user SLDAPIUSER already exists with its security role LcrInstanceWriterLD.
6. Switch to edit mode and add user PIAPPLUSER with the same role LcrInstanceWriterLD.
Note
For a central SLD, the user PIAPPLUSER must be created in the central SLD ABAP system first and be
assigned to ABAP role SAP_XI_APPL_SERV_USER. The password must be same as in the XI Exchange
Profile on the XI Integration Server.
Note
For information on the UME actions, see the Post-Installation Guide - SLD of SAP NetWeaver 2004s, section
Configuring SLD Security, at service.sap.com/sld® Media Library.
Maintaining SLD Connection Parameters (ABAP API)
1. Log on to the SAP XI Integration Server System as user DDIC and call transaction SLDAPICUST. The screen
Maintain SLD Access Data is displayed.
2. Choose Display <-> Change and proceed as follows:
a) Replace the existing SLDAPIUSER with PIAPPLUSER user.
Note
For a central SLD, make sure you use the user with security role LcrInstanceWriterLD.
b) Make sure your entry is marked as Primary.
Note
Only the entry marked as Primary is active.
c) Save your settings.
April 10, 2006 PUBLIC 97
Now we don't know wether the sld configuration is over or not ...or for that matter in RWB we see only J2se based adapter engine and not J2ee based adapter engine...
Kindly help

Hi..
Instaed doing this,please try out template based configuration which has been mentioned in the installation guide or else do as follows
1.Login into NWA (netweaver administrator)
as
http://<host.<domain>.<com>:<port>/nwa
2.Use J2ee_admin user id and password
3.go to deploy and change
4.select template based configuration for PI
5.execute the template
6.install it
you can find the list of other templates which are clear and easy to do the post installation step..i found it useful ..
Apart from these, as per sandro, you can check the data transfer in visual administrator or go the abap engine, transaction RZ70, press accept proposal button
then execute button , check the data supply without any error
Thanks
Gopal
(Avoid points if useful)

Post installation steps for EP 7.0

Hi All,
I have installed EP 7.0 SR1 on windows with Oracle and its successful. (I have selected usage types Java and EP during installation).
As per the installation guide its said to login as below:
http://<hostname>:50100/irj --> but when i open it, it says The requested resource does not exist. But i am able to open normal NW page: http://<hostname>:50100 and access UME, SAP NW Administrator>..
I have applied permanent license in Visual Administrator. but didnt do any of the post installation steps. I didnt see any of the post installation step in guide also, could you please guide me in completing this?
Thanks,
Subbu

Hi All,
Thanks for ur response, i am able to open the portal by giving the address as u mentioned..thank u..But i am facing problem as i couldnt see some options: I read the following in help.sap.com
When you install a portal, you also install predefined system templates for all the connectors that the portal provides. These templates are contained in the System Landscape Templates folder, under
System Administration--> System Configuration --> Portal Content --> Templates
, and can be edited in the Property Editor. Editing a template affects any systems that you create based on this template
I am able to navigate System Administration--> System Configuration but not able to see the option
Portal Content --> Templates
The other point mentioned is:
The system administrator can disable logon by means of the IP address as follows:
Navigate to System Administration --> System Configuration -->
Service Configuration
. i m not able to find the option Service Configuration here??
I have installed NW 2004s SR1, in help.sap.com they didnt mention anything specific abt. release. Could you please guide me why i am missing those options??
Thanks,
Subbu

What are post installation steps for SOA 10.1.3.5 patchset on Windows

Hi all ,
what are the post installation steps in windows after applying SOA patchset 10.1.3.5 on 10.1.3.1
Thanks,
Durga

Hi 924979,
may I ask cause I have same exactly this issue on solaris 10 and what do you mean with :
edit the (two) opmnctl scripts to change "tr" to "/usr/xpg4/bin/tr" ?
Need your suggestion since I change PATH environment variable but still error and The installer cannot find the system application ascontrol ("opmnctl status -app") in the OC4J instance. All system applications should be present even if they are in a stopped or non-routable state. This is generally due to a situation where OPMN has been shutdown ... bla bla bla .. (stop in 83%)
need advise
Regards,
Thanks

Post installation steps for SAP PI, scenarios for SAP ERP 6.0 EhP 3.0 BAIO

Hi!
I installed SAP NetWeaver 2004S with PI component.
I also have a demo SAP ERP 6.0 EhP 3.0 BAIO system with several clients:
(100: demo client, 200: BW, 300: demo client (copy of 100)).
Questions:
what are the post installation steps to configure SAP PI?
Which scenarios can be used in such landscape?
(eg. exchange (IDOC, RFC, etc.) from client ERP:100 to ERP:200)
Thank you very much indeed!
regards
Holger

Hi Holger:
what are the post installation steps to configure SAP PI?
http://help.sap.com/saphelp_nw70/helpdata/en/a0/40084136b5f423e10000000a155106/content.htm
Which scenarios can be used in such landscape?
(eg. exchange (IDOC, RFC, etc.) from client ERP:100 to ERP:200)
I recommend you to use proxys in your landscape as you want to interchange messages between
different clients in the same system.
Hope this helps you.
Carlos

SELinux and post installation steps for 11gR1

sir
how to configure SELinux after installing 11gR1 so that i can use it in enforcing mode.I have posted it in OEL 5.2 forum but they are saying its not possible.Is it exactly so?we can install cobbler and can configure SELinux but not for Ora db 11g?
oracle 11gR1 and SELinux / iptable
regards

watch the other link.

Post installation steps for Security team in ECC60

I am installing a new BI70, ECC6.0 systems. What are security related configuration steps after the installation and client copy. We will export the roles/user masters out of existing Enterprise 4.7,and BW3.1 and import into these new systems.
Thanks in advance
Sam

Hi,
If you have upgraded the system, then perform steps 2A to 2D in develipment system.
Make all the necessary changes to the roles and transaction codes while performing these steps.
You can create a change request by selecting the step 3 and then import the customer tables into quality and production systems
Regards,
Imran

RE: Need Post installation Steps for solution manager4.0 on Windows/oracle

Similar Messages

Maybe you are looking for