Re: Netbook NB200-11L - xp recovery went wrong

Guys,
Help !
I had noticed over time the netbook had been getting slower & slower. I also noticed the system file was showing as high memory usage (circa 160,000) but low cpu.
As there was no virus etc, I couldnt find the answer so decided to use the HDD recovery to factory settings. The Netbook was only being used for casual internet & had no saved pics or files etc loaded.
Anyway, I pressed F8 (i believe) & followed the factory reset instructions.
Was going ok & left machine to do its thing.
Someone came along & turned machine off - mid reset.
Now when i turn it on, i get the following message:
windows could not statr because the following file is missing or corrupt:
<windows root>/sysatem32/hal.dll
Please re-install a copy of the above file.
in fact, when i go in via f8 safe mode etc... they all go to this message
Please help (a novice in this)
Happy Holidays
Martin

Hi Dr Lamp
Thanks for taking the time to reply.
Your link sent me to Toshiba backup media dvd order - which was 30.
The problem is, its a netbook so has no dvd drive. The only way of getting things onto it is via usb/micro or sd card.
And what do you get for the 30 - is it all the factory settings & machine installs that it came with ?
And even if I could get it onto usb/memory card, how would i get it to boot from the usb drive
The annoying thing is I had to do a factory reset on laptop & it all went fine :)
All help v gratefully received
Thanks

Similar Messages

  • Re: NB200 11L recover disc needed

    Hi
    My NB200 11L is not booting properly. I don't have a recovery CD. I saw that Toshiba US offer a download service for recovery discs but couldn't find this service in UK toshiba website. Am I looking in the wrong place or could anyone help me get hold of a recovery cd?
    When I try to boot the notebook from a Windows Xp installation CD I get the following error message:
    A problem has been detected and windows has been shut down to prevent damage to your computer.
    If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
    Check to be sure you have adequate disk space. If a driver is identified in the stop message. disable the driver och check with the manufacturer for driver updates. Try changing video adapters.
    Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use a safe mode to recover or disable components, restart your computer, press F8 to select Advanced Startup options, and then select SAfe Mode.
    Technical information:
    bla bla ....

    Thanks for the reply.
    Apparently my HD is damaged or something.
    I tried to use a recovery disk and it says it can't find HDD1. Then it tries to use HDD0 but when it start formatting it, it stops at a certain point.
    when I tried to use Chkdsk on D: , I got this error message:
    *The Type of the file system is RAW.*
    *CHKDSK is not available for RAW disk*
    I then tried to format D:, the error message is:
    *The type of file system is RAW.*
    *The new file system is UDF.*
    *Enter current volume label for drive D:*
    I don't know the current volume label.
    Any ideas on how to proceed?

  • I was updating my iphone in itunes, then it said the update went wrong and now does not recognize the phone. Says that it is an unknown iphone and I must restore the phone. How can I get it back without deleting all of my stuff?

    I was updating my phone in itunes and the "update went wrong" and now the phone is not recognized by itunes. I unattatched the phone and it wont turn on or off, just shows a picture of the itunes symbol and a usb cord. In itunes it says that it is an unknown iphone and is in recovery mode so I need to restore the phone. If I restore the phone I loose all my pictures, which I dont want to do...and my contacts. Is there any way around this, so I can get my phone back to normal without wiping it all out? Thanks

    To be more clear:
    Was you phone hacked/jailbroken BEFORE you hooked it up?

  • I have been using facetime on my iphone for a while and after the recent, ios update, I cannot seem to use the facetime. What went wrong?

    I have been using facetime on my iphone5 for a while and after the recent IOS update, I cannot seems to use my facetime any longer. what went wrong?

    'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Something went wrong error message in Nokia Asha 5...

    Hi All,
    I am getting an error message  Something went wrong  for my Nokia Asha 502 mobilephone while using the camera application, I am getting this message in the background . Kindly advice how can I permanently fix this issue.
    In one occassion I reset the mobile phone and it worked for sometime , I took a couple of pictures but after that again the same problem occured.
    Will appreciate for your reply on this
    Thanks!!

    Hi, Mobile73268. Welcome to the Nokia Support Discussions. What do you mean by reset? Are you referring to your camera settings or the reset from your phone's 'Settings'?
    If you've already done this: Settings > Reset phone, you can still try to use the Nokia Software Recovery Tool to flash your phone:
    http://www.nokia.com/gb-en/support/faq/?action=singleTopic&topic=FA142987
    Note: The source is from the Nokia UK website. Please check your local Nokia website for future reference.

  • Updating iTunes 12.1 and get error message "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll - what went wrong and how to resolve this?

    Updating iTunes 12.1 and get error message "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll". What went wrong and how to resolve this?

    Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If the advice above doesn't resolve things you could try this alternate version:
    iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
    which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
    Or roll back to the previous build:
    iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
    iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
    tt2

  • HT4623 I was updating my Ipad and something went wrong.  on my screen I have the round blue circle with the word itunes under it and it also has a plug that looks like it is to be plug into a computer can you help me please

    can some one help me I was up dating my Ipad and something went wrong.  I am on my computer now.

    You are in Recovery Mode. Follow the instructions below to recover your iPad.
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
    5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

  • Toshiba NB200 with video card went crazy

    Hi, I have a big problem with my Toshiba netbook NB200-10J (PLL25E-00300VIT) because after making a backup of HD with Acronis True Image Home 11 (run with recovery discs and not with the software installed on Windows 7), reboot your computer has gone mad.
    Specifically, my netbook has an integrated video card (Mobile Intel 945), which can reach a maximum resolution of 1024x600 while the computer after the backup has changed resolution to 1024x768 going even when it is in dos or when I enter the bios (in fact the screens of the bios are cut at the bottom).
    I also tried to update the bios by downloading it directly from the site of toshiba but on reboot the resolution is always 1024x768.
    Trying to launch a live distro of ubuntu 10 that I had on a CD, I noticed that in this case the OS "Sees" the correct video card he proposed as the possible settings 800x600 and 1024x600 (windows7 what he did before the backup with acronis).
    What can I do to restore the situation before the backup ???? ATIH 2011 may have "busted" the bios the onboard video making "believe" on my laptop there is a 1024x768 monitor ????? is there any solution (even under Linux) to put everything in place ?????
    Thank you all for the suggestions that I want to provide.

    In my XP machine, the display is a setting. I don't know where this is in the registry.
    What happens after you reinstall the chipset software and display driver in this order?
       Intel Chip Set Utility for Windows XP, 9.0.0.1007, 27/05/09
       Intel Display Driver for Windows XP, 6.14.10.4926, 27/05/09
    -Jerry

  • IPhone update 3.1.... Went wrong!

    Hello
    I tried to update me iPhone on iTunes the other day from 3.0 to 3.1.
    My update didn't go in and my phone went into recovery mode although when I tried to recover it the recovery also failed... After 4 hours of trying to recover it my boyfriend had to force a 3.0 version back into the phone and I lost everything, now it didn't bother me so much as the phone was only a few weeks old!
    After a good old cry and panic the phone worked again but I want to know what happens next time...? Do I update it and lose everything again or can someone tell me what went wrong and how to resolve the issue?
    Thank you
    Message was edited by: Ladybelle

    Without being there it is hard to say what went wrong.
    When I do and update, I download the update to my computer first so if the update gets interrupted mid-download, my phone is safe. After the update is fully downloaded then I update the phone. This method has worked flawlessly for me on every update.

  • Restore iphone 4 to install the ios 5 but something went wrong while doing back up and whenever i connect the phone to itunes theres an error and the phone turn off after 1min

    hi guys i just downloaded the ios 5 and while it was doing back up something went wrong and everything were stopped and shows me a message as an error msg and now whenever i connect my iphone 4(32g) to itunes after 1min it goes off and the battery full and the same thing happend again and again can u help me guys plz i only see connect to itunes on the screen no options even

    by reset option do you mean the DFU restore? worked for me, have you tried that?
    if not - hold the lock and home button until the power down bar comes up. then hold the lock button for ten seconds - next continue to hold the lock button and press the home button for ten seconds - next release the lock button and hold the home button for 10 seconds. this should be done with the phone tethered. If done right and your itunes is configured as such, the phone will reload the drivers and start up itunes, and then prompt for a restore/update.

  • What went wrong ?

    Dear all,
    I`m trying to figure out what went wrong with my database.
    During the higher load the users were suddenly getting DBIF_RSQL_SQL_ERROR, no matter what they wanted to do. When checking system I found many messages like:
    Database error -1000 at OPC access to table REPOLOAD
    > POS(1) Too many lock requests
    > Include ??? line 0000.
    Run-time error "DBIF_REPO_SQL_ERROR" occurred
    Run-time error "DBIF_RSQL_SQL_ERROR" occurred
    Database error -1000 at OPC
    > POS(1) Too many lock requests
    Database error -1000 at OPC
    > POS(1) Too many lock requests
    Database error -1000 at OPC
    > POS(1) Too many lock requests
    Database error -1000 at EXE
    > POS(1) Too many lock requests
    According to documentation I found error -1000:
    1000: Too many lock requests
    Explanation
    There are too many locks or lock requests.
    User Request
    You can try to repeat the SQL statement at a later time or cancel the transaction. If this situation occurs frequently, then the MAXLOCKS general database parameter is too small and should be increased
    Database kernel showed following messages:
    2009-12-07 16:04:18  8126 ERR     5 Catalog  Catalog update failed,IFR_ERROR=-1000,DESCRIPTION=UNDEFINED
    2009-12-07 16:05:13  8170 ERR     5 Catalog  Catalog update failed,IFR_ERROR=-1000,DESCRIPTION=UNDEFINED
    2009-12-07 16:10:13  8182 ERR     5 Catalog  Catalog update failed,IFR_ERROR=-1000,DESCRIPTION=UNDEFINED
    2009-12-07 16:15:09  8229 ERR     5 Catalog  Catalog update failed,IFR_ERROR=-1000,DESCRIPTION=UNDEFINED
    2009-12-07 16:15:13  8123 ERR     5 Catalog  Catalog update failed,IFR_ERROR=-1000,DESCRIPTION=UNDEFINED
    So do you think it is just about MAXLOCKS parameter or also with catalog cache sizing could be wrong ?
    Version : MaxDB 7.6.6.7.
    Thank you for your comments.
    Pavol

    > Database error -1000 at OPC
    > > POS(1) Too many lock requests
    > 1000: Too many lock requests
    > Explanation
    > There are too many locks or lock requests.
    > 2009-12-07 16:04:18  8126 ERR     5 Catalog  Catalog update failed,IFR_ERROR=-1000,DESCRIPTION=UNDEFINED
    > So do you think it is just about MAXLOCKS parameter or also with catalog cache sizing could be wrong ?
    > Version : MaxDB 7.6.6.7.
    Hi there,
    it's really just about the MAXLOCKS setting.
    As you seem the "Catalog update failure"-message also points out error no. -1000.
    It's the same "too many lock requests" error as before.
    Having a MAXLOCKS value of 1.000.000 or even 3.000.000 is not unusual with MaxDB!
    regards,
    Lars

  • My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?

    My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?

    I tried this and still have the same problems. If I open Address book or the Mac App Store I get the library rebuild popup and a hang. I created a fresh user and then things are better apart from the printing issue. Its clearly some 3rd party software issue but the crash logs are meningless to me. I used the excellent Etre check app from http://www.etresoft.com/etrecheck so I have a list of what is being loaded and can compare clean and crashed user info but as I cant work out which of the startup items, launch agents, launch daemons etc that  are causing the problem.
    I have eliminated Dropbox, Mac Keeper and Witness, and it isnt related to my exterrnal LED cinema dispay or my external thunderbolt drives, or any USB devices if thats any help to anyone else. Info from Etrecheck follows -
    Kernel Extensions:
              com.oxsemi.driver.OxsemiDeviceType00          Version: 1.28.7
              com.rogueamoeba.InstantOn          Version: 6.0.2
              com.rogueamoeba.InstantOnCore          Version: 6.0.2
              com.Cycling74.driver.Soundflower          Version: 1.5.3
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
                 [not loaded] com.adobe.fpsaud.plist
                 [not loaded] com.adobe.SwitchBoard.plist
                 [not loaded] com.bombich.ccc.plist
                 [not loaded] com.dymo.pnpd.plist
                 [not loaded] com.intego.BackupManagerPro.daemon.plist
                 [not loaded] com.micromat.TechToolProDaemon.plist
                 [not loaded] com.microsoft.office.licensing.helper.plist
                 [not loaded] com.orbicule.witnessd.plist
                 [not loaded] com.sierrawireless.SwitchTool.plist
                 [not loaded] com.stclairsoft.AppTamerAgent.plist
                 [not loaded] org.macosforge.xquartz.privileged_startx.plist
                 [not loaded]          pcloudd.plist
    Launch Agents:
                     [loaded] com.divx.dms.agent.plist
                     [loaded] com.divx.update.agent.plist
                     [loaded] com.epson.epw.agent.plist
                     [loaded] com.lacie.raidmonitor.daemon.plist
                     [loaded] com.lacie.safemanager.daemon.plist
                     [loaded] com.micromat.TechToolProAgent.plist
                     [loaded] com.orbicule.WitnessUserAgent.plist
                     [loaded] org.macosforge.xquartz.startx.plist
    User Launch Agents:
                 [not loaded]          .DS_Store
                     [loaded] com.adobe.AAM.Updater-1.0.plist
                     [loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
                     [loaded] com.digitalrebellion.SoftwareUpdateAutoCheck.plist
                     [loaded] com.divx.agent.postinstall.plist
                     [loaded] com.google.keystone.agent.plist
                     [loaded] com.propaganda.dejavu.dvmonitor.plist
                     [loaded] com.valvesoftware.steamclean.plist
                     [loaded] com.zeobit.MacKeeper.Helper.plist
    User Login Items:
              iTunesHelper
              Synergy
              TomTomHOMERunner
              Dropbox
    3rd Party Preference Panes:
              Déjà Vu
              Flash Player
              Flip4Mac WMV
              GR-55
              Paragon NTFS for Mac ® OS X
              Perian
              Printopia
              TechTool Protection
              Witness

  • Sorry, something went wrong - Open Office File from Search Results Page with Office Web Apps

    Hi,
    I'm getting "Sorry, something went wrong" error when I'm trying to open any office document from inside Search Results Page with Office Web Apps, the same error is appearing in the document preview as well.
    The error in SharePoint logs says that the file cannot be found.
    Please note that this error is coming only when the "Filename" of the document is not written in English (in my case its written with Arabic characters).
    If I try to open it from the document library, its opening properly with no errors.
    The only difference between two URLs (document URL in Search Results and in Document Library) is the value for "sourcedoc" attribute;
    In the case of Search Results page, the filename in "sourcedoc" attribute is kept as is with Arabic characters.
    While in the Document Library, the filename in "sourcedoc" attribute is converted into different characters (something like: "B9%D9%85%D9%8").
    Anybody have an idea on how to overcome this issue, implement a workaround or modify the "sourcedoc" behavior?
    Thanks in Advance.
    Hamza AlSughier

    Dear Wendy,
    Thanks for your efforts, I already tried your last suggestion before, but this didn't solve my problem.
    Actually my end users are accessing this portal using ADFS and HTTPS.
    Finally I got this solved, I have done below to get my overall solution working perfectly:
    - First I have configured Windows Authentication and ADFS Authentication on the same zone which is the default zone.
    - The issue when opening office documents with Arabic file name has disappeared as a result of first change.
    - Then I have faced an issue where we are not able to crawl content under Default zone, however we have to do so, after too many efforts, I found that its related to the Load-balancer/proxy, I have made the crawler server
    to crawl himself (http://CrawlServerName:PortNumber).
    - Also a change on Alternate Access Mapping was needed, I have set one of the extended zones (which is running Windows Authentication only) as Internal URL for the Default Zone, and this is was the URL I used for Crawling.
    I have configured Server Name Mappings to make sure we got proper URLs in Search Results.
    - Then we faced another issue, which is Authentication selection on login page (How to bypass this page, and authenticate using ADFS auto), I used this solution (Set Custom Sign In Page):
    http://0ut0ftheb0x.wordpress.com/2014/01/04/skip-the-authentication-selection-page-at-_logindefault-aspx-in-a-mixed-authentication-environment/.
    - I faced one more issue as a result of above workaround; Sign Out functionality wasn't working well; users get logged in automatically whenever I click on Sign Out. I solved this by modifying the "Sign Out" Control under _layouts;
    I made it to redirect users to ADFS Sign Out Page instead of SharePoint Sign Out Page (I know its not recommended, but I don't have any other option).
    Hamza AlSughier

  • Creative Cloud Packager - "Oops Something went wrong ..."  Service down?

    I have been trying to use the Creative Cloud Packager application for two days to download and package an app.  It is refursing to connect to Adobe and all I get is a criptic something went wrong try again later message. 
    I am an Enterprise customer and am using the most recent version of the packager available in my enterprise account download account.
    Please let me know what other information I can provide.
    Thank you.
    - Lynna Jackson, Williams College

    Hi,
    Download and Install Adobe Application Manager, launch it and let it update itself.  Then you should be able to close Application Manager and open Creative Cloud Packager.  That worked for me
    --=Thanks!
    --==Trey

  • After the latest update to Photoshop 2014, something went wrong and started spray-like black oil on canvas. I have deadline with cover. Can you help me please?

    How do I undo whatever went wrong after installing the latest update to Photoshop 2014 and suddenly when I tried to paint or touch up my illustration (book cover I'd drawn and painted, then scanned in and continued painting, changing. It's mostly done but I needed to send it like yesterday!!) OR touch up a photograph, black-like oily smudge-like substance sprayed around the point of the brush. I tried to fix by resetting but really didn't know what to do and probably made it worse. However, the problem happened after I updated the Photoshop Creative Cloud 2014 on my desktop 8.1 Windows and after a Tech helped update the regular CC Photoshop on my laptop 2007, 64 bit Windows to 2014. He promised to call back after giving it time to install but didn't for whatever reason on Friday. That happened to go up to the same update I did on my Windows 8.1 Windows. I have this deadline and really stressed. COULD IT BE THE UPDATE OR BOTH. REGARDLESS, CAN SOME EXPERT HELP ME UNDO WHATEVER THE UPDATE AND/OR I DID? I'm a God-gifted artist but only started using Photoshop CC, then updated to 2014--which, again, I like even better--when I began my monthly membership January or February 2014, although I had paid version 2002 and updated to paid version 2004 (ownership, not paid subscription like now). I've learned so much, including transforming, moving, stretching, with layers--all in the painting area with my illustrations--a little touch ups with photography.  MY EMAIL IS: [email protected] I really appreciate any help. This needs to be resolved today, the latest tomorrow--I could call tomorrow, however. I was chatting with a Tech support but lost him about an hour or less back. I have the case number and name and gave him my contact number, but they won't be in until tomorrow. He's supposed to give info and escalate the case. I really need an answer--if possible, today. It may require going back to before installing the latest update. THANK YOU KINDLY. Glena Jessee-King

    Update your graphics driver and/or turn off GPU acceleration in the Performance prefs.
    Mylenium

Maybe you are looking for

  • How to use Read_Text  in Smartforms

    Hi Experts, I am developed smartforms .My probelm is i need to use the read_text in smartforms . i am fetch the text in print program how to use this text in smartform. Pls suggest me. This is my print program . REPORT  zsd_invoice_text. PARAMETERS :

  • Pb with header line in my report

    hi, I have a problem with the alignment of the header line of my table in my report Indeed the header line is centered on the first page but not on the second one. I attach the code and a pdf which shows the problem. If someone can help me,please. Be

  • How material will determine

    Hi experts I wanted to Know how a Particular material will be get planned so that it has to generate specifcally  planned order only.it should not generate purchase requistion. Regards Sandeep

  • I have an IBOOK G4 When I try to update new version of ff the file comes up as unable to mount.

    The new version of firefox can not be updated. It downloads just fine. But when I open the file it says file can not be mounted. I don't know what to do.

  • I need help in re-installing photoshop

    Photo elements 8 stopped working. I uninstalled it, then reinstlled it and it won't open. I am getting an error code 1, something about licensing being wrong , but I entered the License number correctly. How can this be fixed? Thanks for any help dou