Re: NF750-G55 core unlocking?
Hello from me again... I just got my new nf750-g55 after bricking my old one(msi) by using msi inbuild flasher and not these forum's procedure...
Anyways that's not the point...
I want to unlock the 4th proccesor as i have AMD Phenom II x3 Black Edition....
I have tryed this with my old mb(the one bricked) and had the same results.
I am going to explain the procedure i followed with the nf70-g55
BIOS->CELL MENU-->NVIDIA CORE CALIBRATION-> SET TO [AUTO ]-> SAVE SETTING AND EXIT
After I press the save the computer shutsdown (not restarting like normal procedure)
I press the power the pc is powered but i have no POST
I reset the bios and here i am again hearing suggestions from you guys and mistakes (that i might have made)...
CPU:->PHENOM II x3 BLACK EDITION
RAM:->DDR3 2x2GB OCZ
MB: MSI NF750-G55
GPU1: mGPU Nvidia 8200 (onboard)
GPU2: NVIDIA 9600GT 512MB
Power: TAGAN 480Watt in COmbined Mode
Thanks in advance
Don't hijack!! Topic split.
Similar Messages
-
MOVED: NF750-G55 core unlocking question
This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=131625.0Normally such a question would seem dumb, but when it comes to overclocking a core i7 it seems that less RAM can actually be better.
But how limiting is the RAM on your overclock? Essentially what Im asking is which would give me the better performance: keeping the setup as it is and overclocking as far as possible, or selling 6GB of RAM in order to achieve a better overclock on the CPU and remaining RAM.
Here is my current system watercooled:
i7 920 Rampage II Extreme 12GB Corsair Dominator DDR3 X-Fi Titanium BFG H20 GTX 295 Quad-SLi 2x Intel X-25M G2 160GB WD Black 2TB 64mb cache CoolerMaster Real Power 1250W PSU Windows 7 Ultimate x64
EDIT: That should, of course, say 12GB in the title. -
NF750-G55 Overclocking - Easy OC Switch
Hello, new to the forums.
System Specs:
NF750-G55 mobo 200MHz fsb
Phenom II x4 955 BE Deneb 3.2GHz
8GB Kingston HyperX (2 x 4 2GB DDR3 1600)
Antec 850Watt PSU
MSI Radeon 5750 1GB DDR5
Tuniq Tower 120 Extreme
Windows 7 Ultimate 64-bit
Where to start off?
My Phenom II being a Black Edition processor, I was only OC'ing it via the unlocked multiplier. I had it set to x18 which had brought it to 3.6GHz stable at stock voltage. I turned AMD Cool and Quiet off in the BIOS, and set the power settings in the windows control panel to High performance. I had been running this configuration for months with absolutely no issues whatsoever. I had been monitoring the CPU temps.....never went over 120 F during gaming. So, no problems there.
Today I decided to try the Easy OC switch on the motherboard.
I first set the CPU clock multiplier back to x16 (3.2GHz) via BIOS. Turned AMD Cool and Quiet back on, and set the power settings in the control panel back to Balanced. Rebooted the PC, everything was back to factory defaults.
Next, I powered down the system, pulled the cord from the PSU, then switched both Easy OC switches to the down position in order to gain the extra 20% fsb speed (brought it up to 240MHz). Plugged the PSU power cable back in, turned on the system and went straight into BIOS to see if there was any change. Success, the fsb was now showing at 240MHz, CPU showed 3840 MHz, RAM showed 1604MHz. Everything looked as it should in my opinion.
When I booted up the system, I got a BSOD. Next boot try only gave me two options:
Boot with system repair (recommended)
Boot system normally
I chose system repair and this is the message I got:
STOP: c0000221 Unkown Hard Error
I tried another normal reboot, BSOD. Then I tried another reboot with system repair and got this error message:
STOP: c000021a {Fatal System Error} The initial session process or system process terminated unexpectedly with a status of 0x00000000 (0xc0000221 0x001003f0). The system has been shut down.
I turned system power off. Put both switches back to the up position and booted the system. The system booted successfully.
Does anybody know what those error messages mean? I assume they are memory addresses.
Does anybody have any clue as to why this error occurred, or what I may have done wrong in the process?
Was I supposed to adjust any voltages?
Should I have tried to only switch one switch at a time, ie first 10%, then 15%, then 20%?
Any input or help would be greatly appreciated.
Thanksdont know if this helps but I found on my NF980-G65 (with the switch over clocking feature) that in order for it to be stable when used you need to do a handful of things in the BIOS before clicking the switch again this in on my board.
1. make sure your ram can handle the over clocked freq. thats pretty important.
2. I turn off cpu power phase control and led control in green menu.
3. in cell menu I turn off quite N cool and amd turbo core technology. 3. I then restart step back into BIOS and make sure all of the settings in step 1 and 2 are infact off, then I power down system. Unplug power cord and then flip the switches.
4. plug cord back in power up step into bios and then change the cpu voltage to 1.39-1.42 resectively and dram voltage to 1.55v. NB voltage is pretty good on my board for self regulation. ran a 3 hour prime95 test with no BSD. however I did see of course a increase of heat to both cpu and system temps CPU was around 53C under 100% load and system was at 38C. which are still within the normal operating ranges.
I however did not like the increase of heat as I run hours upon hours of gaming good time so I turned off the switches...... or did I?? Well it seems that onec you hit the switches the only way for the system to go back to factory FSB is to shut down and unplug power cord and clear the cmos. what can I say my board is like a child it doesnt always like to listen to commands so you have to spank them lol i.e. clear that cmos. Hope this helps (Also does sound like your memory does not like the high clock speeds, whenever you over clock including factory switches you run the risk of damage to your componets).
-Sope- -
Hello,
My Specs:
Summary
Operating System
MS Windows 7 Ultimate 64-bit
CPU
AMD Phenom II X4 955 34 °C
Deneb 45nm Technology
RAM
4.0GB Single-Channel DDR3 @ 733MHz (9-9-9-20)
Motherboard
MSI NF750-G55 (MS-7578) (CPU1)
Graphics
VA220E @ 1360x768
NVIDIA GeForce 9600 GT (Microsoft Corporation - WDDM v1.1) (XFX Pine Group)
Hard Drives
147GB Western Digital WDC WD1500HLFS-01G6U1 ATA Device (IDE) 31 °C
156GB Western Digital WDC WD1600AAJS-00V4A0 ATA Device (IDE) 32 °C
Optical Drives
RYJ NW1YJOXE SCSI CdRom Device
Audio
Realtek High Definition Audio
Operating System
MS Windows 7 Ultimate 64-bit
Installation Date: 17 July 2010, 23:47
Serial Number: FJGCP-4DFJD-GJY49-VJBQ7-HYRR2
CPU
AMD Phenom II X4 955
Cores 4
Threads 4
Name AMD Phenom II X4 955
Code Name Deneb
Package Socket AM3 (938)
Technology 45nm
Specification AMD Phenom(tm) II X4 955 Processor
Family F
Extended Family 10
Model 4
Extended Model 4
Stepping 3
Revision RB-C3
Instructions MMX (+), 3DNow! (+), SSE, SSE2, SSE3, SSE4A, x86-64
Bus Speed 220.0 MHz
Rated Bus Speed 2200.0 MHz
Stock Bus Speed 200 MHz
Average Temperature 34 °C
Caches
L1 Data Cache Size 4 x 64 KBytes
L1 Instructions Cache Size 4 x 64 KBytes
L2 Unified Cache Size 4 x 512 KBytes
L3 Unified Cache Size 6144 KBytes
Core 0
Core Speed 3519.8 MHz
Multiplier x 16.0
Bus Speed 220.0 MHz
Rated Bus Speed 2200.0 MHz
Temperature 34 °C
Thread 1
APIC ID 0
Core 1
Core Speed 3519.8 MHz
Multiplier x 16.0
Bus Speed 220.0 MHz
Rated Bus Speed 2200.0 MHz
Temperature 34 °C
Thread 1
APIC ID 1
Core 2
Core Speed 3519.8 MHz
Multiplier x 16.0
Bus Speed 220.0 MHz
Rated Bus Speed 2200.0 MHz
Temperature 33 °C
Thread 1
APIC ID 2
Core 3
Core Speed 3519.8 MHz
Multiplier x 16.0
Bus Speed 220.0 MHz
Rated Bus Speed 2200.0 MHz
Temperature 34 °C
Thread 1
APIC ID 3
RAM
Memory slots
Total memory slots 4
Used memory slots 1
Free memory slots 3
Memory
Type DDR3
Size 4096 MBytes
Channels # Single
DRAM Frequency 733.3 MHz
CAS# Latency (CL) 9 clocks
RAS# to CAS# Delay (tRCD) 9 clocks
RAS# Precharge (tRP) 9 clocks
Cycle Time (tRAS) 20 clocks
Bank Cycle Time (tR?) 33 clocks
Command Rate (CR) 1T
SPD
Number Of SPD Modules 1
Slot #1
Type DDR3
Size 4096 MBytes
Manufacturer OCZ
Max Bandwidth PC3-10700H (667 MHz)
Part Number OCZ3G1333LV4G
SPD Ext. EPP
JEDEC #5
Frequency 666.7 MHz
CAS# Latency 9.0
RAS# To CAS# 10
RAS# Precharge 10
tRAS 21
tRC 34
Voltage 1.500 V
JEDEC #4
Frequency 592.6 MHz
CAS# Latency 8.0
RAS# To CAS# 8
RAS# Precharge 8
tRAS 18
tRC 30
Voltage 1.500 V
JEDEC #3
Frequency 518.5 MHz
CAS# Latency 7.0
RAS# To CAS# 7
RAS# Precharge 7
tRAS 16
tRC 26
Voltage 1.500 V
JEDEC #2
Frequency 444.4 MHz
CAS# Latency 6.0
RAS# To CAS# 7
RAS# Precharge 7
tRAS 14
tRC 23
Voltage 1.500 V
JEDEC #1
Frequency 370.4 MHz
CAS# Latency 5.0
RAS# To CAS# 5
RAS# Precharge 5
tRAS 12
tRC 19
Voltage 1.500 V
Motherboard
Manufacturer MSI
Model NF750-G55 (MS-7578)
Version 1.0
Chipset Vendor NVIDIA
Chipset Model nForce 740a SLI
Chipset Revision A2
Southbridge Vendor NVIDIA
Southbridge Model nForce 740a SLI MCP
Southbridge Revision A2
BIOS
Brand American Megatrends Inc.
Version V1.2
Date 09/24/2009
Graphics
Monitor
Name VA220E on NVIDIA GeForce 9600 GT (Microsoft Corporation - WDDM v1.1)
Current Resolution 1360x768 pixels
Work Resolution 1360x728 pixels
State enabled, primary
Monitor Width 1360
Monitor Height 768
Monitor BPP 32 bits per pixel
Monitor Frequency 60 Hz
Device \\.\DISPLAY1\Monitor0
NVIDIA GeForce 9600 GT (Microsoft Corporation - WDDM v1.1)
GPU G94
Device ID 10DE-0622
Revision A2
Subvendor XFX Pine Group (1682)
Technology 65 nm
Die Size 240 nm?
Transistors 505 M
Release Date Feb 21, 2008
DirectX Support 10.0
DirectX Shader Model 4.0
OpenGL Support 3.0
BIOS Version Version 62.94.11.0.0
ROPs 16
Shaders 64 unified
Memory Type GDDR3
Bus Width 256 Bit
Hard Drives
WDC WD1500HLFS-01G6U1 ATA Device
Manufacturer Western Digital
Form Factor GB/2.5- to 3.5-inch backplane adapter
Business Unit/Brand Enterprise/WD VelociRaptor®
Interface/Connector SATA 3 Gb/s with 22-pin SATA connector/SATA 1.5 Gb/s with 22-pin SATA connector (Mobile)
Interface IDE
Capacity 147GB
Real size 150,039,945,216 bytes
S.M.A.R.T
01 Read Error Rate 200 (200 worst) Data 0000000000
03 Spin-Up Time 203 (198) Data 0000000B09
04 Start/Stop Count 100 (100) Data 0000000052
05 Reallocated Sectors Count 200 (200) Data 0000000000
07 Seek Error Rate 200 (200) Data 0000000000
09 Power-On Hours (POH) 100 (100) Data 00000001D1
0A Spin Retry Count 100 (253) Data 0000000000
0B Recalibration Retries 100 (253) Data 0000000000
0C Device Power Cycle Count 100 (100) Data 0000000052
C0 Power-off Retract Count 200 (200) Data 0000000013
C1 Load/Unload Cycle Count 200 (200) Data 0000000052
C2 Temperature 116 (110) Data 000000001F
C4 Reallocation Event Count 200 (200) Data 0000000000
C5 Current Pending Sector Count 200 (200) Data 0000000000
C6 Uncorrectable Sector Count 200 (200) Data 0000000000
C8 Write Error Rate / Multi-Zone Error Rate 200 (200) Data 0000000000
Temperature 31 °C
Temperature Range ok (less than 50 °C)
Status Good
Partition 0
Partition ID Disk #0, Partition #0
Size 992 KB
Partition 1
Partition ID Disk #0, Partition #1
Size 100 MB
Partition 2
Partition ID Disk #0, Partition #2
Disk Letter C:
File System NTFS
Volume Serial Number 30AD5362
Size 140GB
Used Space 55GB (40%)
Free Space 85GB (60%)
Partition 3
Partition ID Disk #0, Partition #3
Size 248 KB
WDC WD1600AAJS-00V4A0 ATA Device
Manufacturer Western Digital
Form Factor GB/3.5-inch
Business Unit/Brand Desktop/WD Caviar®
RPM/Buffer Size or Attribute 7200 RPM with 8 MB cache
Interface/Connector SATA 3 Gb/s with 22-pin SATA connector/SATA 1.5 Gb/s with 22-pin SATA connector (Mobile)
Interface IDE
Capacity 156GB
Real size 160,041,885,696 bytes
S.M.A.R.T
01 Read Error Rate 200 (200 worst) Data 0000000000
03 Spin-Up Time 145 (141) Data 0000000E95
04 Start/Stop Count 100 (100) Data 0000000136
05 Reallocated Sectors Count 200 (200) Data 0000000000
07 Seek Error Rate 200 (200) Data 0000000000
09 Power-On Hours (POH) 098 (098) Data 0000000738
0A Spin Retry Count 100 (100) Data 0000000000
0B Recalibration Retries 100 (100) Data 0000000000
0C Device Power Cycle Count 100 (100) Data 00000000AF
C0 Power-off Retract Count 200 (200) Data 0000000059
C1 Load/Unload Cycle Count 200 (200) Data 00000000DC
C2 Temperature 111 (104) Data 0000000020
C4 Reallocation Event Count 200 (200) Data 0000000000
C5 Current Pending Sector Count 200 (200) Data 0000000000
C6 Uncorrectable Sector Count 200 (200) Data 0000000000
C7 UltraDMA CRC Error Count 200 (200) Data 0000000000
C8 Write Error Rate / Multi-Zone Error Rate 200 (200) Data 0000000000
Temperature 32 °C
Temperature Range ok (less than 50 °C)
Status Good
Partition 0
Partition ID Disk #1, Partition #0
Disk Letter D:
File System NTFS
Volume Serial Number D04EC439
Size 99MB
Used Space 94MB (95%)
Free Space 5MB (5%)
Partition 1
Partition ID Disk #1, Partition #1
Disk Letter E:
File System NTFS
Volume Serial Number D8500611
Size 149GB
Used Space 22.8GB (16%)
Free Space 126GB (84%)
Optical Drives
RYJ NW1YJOXE SCSI CdRom Device
Media Type DVD-ROM
Name RYJ NW1YJOXE SCSI CdRom Device
Availability Running/Full Power
Capabilities Random Access, Supports Removable Media
Config Manager Error Code Device is working properly
Config Manager User Config FALSE
Drive F:
Media Loaded FALSE
SCSI Bus 0
SCSI Logical Unit 0
SCSI Port 4
SCSI Target Id 0
Status OK
Audio
Sound Cards
Realtek High Definition Audio
High Definition Audio Device
Playback Device
Speakers (Realtek High Definition Audio)
Recording Device
Microphone (Realtek High Definition Audio)
I pulled one of the OC switches down to overclock by 10% and it work fine and my phenon 955 went from 3.2 to 3.5, but when i try 15% or 20% by switching the other ones pc would not boot at all untill i cleared my cmos, I'm new to overclocking and i don't know much about it.. i got a HAD 922 case with lots of fans and i got a coolermaster v10 cpu cooler which works great. I really want to oc it up to 4.0ghz. Don't know whats going on or why it wouldn't let.. i remember when i tried doing 15% oc my pc turned on and said something about bootmgr and it being corrupt? nothing worked untill i turned it off and cleared cmos.. I don't know what it is that i need to do. I have a Ultra 750wat psu btw. Any help will be greatly appreciatedYour BSOD'ing during load because your cpu is too hot.... now that you've got 4Ghz to boot..back off the voltage (1 step down at a time) until you stay under 45*C.. If you go too low you wont be stable...if you go too high you'll overheat and crash. These chips don't like anything above 50*C.... hell I start to worry about stability at 45*C. AMD states the max (recommended) is 66*C. I say B.S. and just stay under 50*C to be safe.
Also... you will not be able to do 1800mhz ram w/ a 4Ghz CPU clock.... the IMC just isn't strong enough. You'd be much better off at 1333mhz and tightening up your timings a tad. If your looking for graphics performance... OC your NB and HT clocks. You'll gain 12-16 fps in Vantage upping your NB to 2800mhz and your HT to ~2500mhz while keeping the CPU cool and comfortable at ~3.8Ghz. (this is especially helpful if you ever plan on going SLI) -
Ok, shooting in the dark here. I just purchased the MSI NF750-G55 from Newegg along with these components:
CORSAIR Vengeance 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800), sticks in slots 1,2
AMD Phenom II X6 1090T Black Edition Thuban 3.2GHz Socket AM3 125W Six-Core Desktop Processor (including fan)
XFX HD-485X-ZNFC Radeon HD 4850 1GB 256-bit DDR3
Antec NEO ECO 400C 400W Continuous Power ATX12V 2.3 / EPS12V 80 PLUS Certified Active PFC Power Supply
The system hangs randomly. Sometimes with a BSOD (that disappears too fast to read), sometimes the screen just freezes requiring a hard reboot. Totally random, I can play Witcher II for hours just fine without and incident, or I can mess around with Solitaire and have it freeze 10 minutes in. I cannot find a pattern to it. Nothing in the Windows Event Logs other than the un-expected shutdown messages.
I have not messed around with the BIOS settings or played around with any overclocking functions, everything is stock/default.
I have run Memtest86, did not find nothing or hang the system. (let it run overnight)
Windows 7 64 Professional, latest drivers from MSI and ATI (for the video card).
Any suggestions as to where/how to start to troubleshoot this?Umm isn't "Vengeance" memory for use with icore/Sandybridge systems?
I agree psu but then changed to ram issues when read the memory you're attempting to use with that system.
I'm not seeing any Vengeance on the list for your board, XMS yea but not Vengeance unless I missed it.
Not saying no way it can work but might require tweaking to do so.
Have you run memtest at all?
You really should be using the Corsair Dominator GT memory with your Phenom II see>http://www.corsair.com/vengeance-8gb-dual-channel-ddr3-memory-kit-cmz8gx3m2a1600c9.html click on the FAQs & Support link on the page.
Might RMA exchange it with newegg or if not there talk to "Ram guy" over at Corsairs support site, he'd surly help you out if you asked I'd think.
You might in the end get the Vengeance to work yea, if its the root cause of the issues you have now, tweaking it some to get it working right, might not be optimal to do so regardless.
Any way I'd run memtest if you haven't, see what that tells ya first. -
Hello All,
Just received a new shipment and the computer is not passing POST, Details as follows...
(oops) AMD Phenom II x6 1090T
MSI NF750-G55 BIOS default no software installed yet...
GSkill 4x4GB DDR3 1333
CoolMax 500w +3.3 30A +12v1 18A +12v2 16A -12v 1A 12v 380W
On Board Video
Kingston 128gb SSD and Sony Sata DVD R/W
Getting post to the Checking vRam and it freezes, no input after that recognized. Computer is new, I have tried with just 1 dimm installed (yes in the correct spot) and also with only the CPU, PSU, and keyboard connected. All fail at that point. Post code 008F reads at that point.
Any additional info will be given at request.Check the BIOS chip, as you need at least BIOS 7578v13 for that CPU.
If the board doesn't have that version, you will need a supported CPU to flash it.
It may also be the memory you use, try 1 el-cheapo stick and see if it posts.
And last, if you PSU is this one:
http://www.newegg.com/Product/Product.aspx?Item=N82E16817159062&Tpk=CoolMax%20500w
That piece of junk will not power your system, it's old rubbish. -
NF750-G55 New Build Won't Boot to DVD
I'm doing a rebuild of a system in which the old motherboard failed. This is only the second time I have done a build, so forgive any apparent ignorance. The following describes the system: Motherboard: MSI NF750-G55, CPU: AMD Athlon II X3 450, PSU: Hiper Type R MkII 880W, Case: Antec Three Hundred, Memory: Rendition by Crucial 1 X 4GB, Hard Drive: Seagate 400 GB, DVD: Samsung 22X SpeedPlus. Only the case, PSU and DVD come from the first build I did 18 months ago and were fine until the old MOBO failed.
The problem I'm encountering with the new MSI NF750-G55 is booting to the DVD so I can load Windows Vista onto the hard drive. The POST gives me a Bad CHKSUM error and directs me to bios setup. In setup, the Boot Sequence shows my DVD and hard drives as disabled and won't let me enable either.
I've uninstalled everything, cleared the CMOS and reinstalled everything five times. Nevertheless I am still getting the same error message and can't enable either my DVD drive or hard drive. Therefore, I'm unable to successfully boot up and load windows onto the new hard drive.
I'm out of ideas and ready to return the MOBO to Newegg for another, but I would rather fix the problem. Does anyone have any ideas as to what I can try next before I ask for an RMA?
Thanks in advance for any help you can provide this newbie.Quote from: Pixy on 16-April-11, 04:24:53
I've tried loading defaults (both optimized and fail-safe) in bios setup as well as by using F2 in the chksum error screen. All result in a screen that looks like this:
The text that is obscured in the upper part of the screen reads:
BTX loader 1.0 BTX version is 1.01
Console: internal video/keyboard
Bios drive C: is disk 0
Bios 636kB/2030208kB available memory
Once in that screen, the only way out is to unplug the PSU and reset the CMOS.
As I said before, I'm stymied and have no idea what to try next.
Quote
Once in that screen, the only way out is to unplug the PSU and reset the CMOS.
do not do this, just hit reset button then press F11 during BIOS post screen and boot from your optical drive. -
NF750-G55
2X1GB Corsair XMS3 DDR3 1066
AMD AM3 X4 945 @ 3.0ghz
ULTRA 750w LSP
XFX Radeon HD 5770
New build. Loads Windows 7 fine, everything works fine... except when I try to use the graphics card. Tested the card on another machine and it works perfectly fine. I flashed the bios to 1.3 and still nothing. Tried changing the settings to Primary graphics PCI-E and disabling onboard VGA. All I can do is get it to boot with the card inserted but plugged in to the onboard gpu. If I switch settings back to default I just get full spin up and no post. Anyone know how to fix this?Do >>Clear CMOS Guide<< with power cord removed
-
Hi,
So my dad is addicted to newegg and buys parts just because they're a good deal (even though he probably won't get to ever using them). So while I was home recently I made a build literally out of parts that were lying around. Here's the specs.
MB: MSI nf750-g55
CPU: AMD athlon || X2 X260 3.2g
RAM: 2 gskill ddr31600 pc3 12800 4gbX2
PSU: Thermaltake Purepower(tm) atx 12v 400w
The onboard gpu makes a weird noise so I added an ATI Radeon HD 5450 VC
The problem: So everything worked fine for about a month and a half. Used it as a media center for my tv. One day I left it on while I was doing laundry. I couldn't have been afk for more than 10min, but when I came back , all the aps lights were off, the keyboard and ethernet light was on, and the led on the front of the case was flashing(whatever that meant). So I hrmmed and tried to reboot, no go. When I try to power on, the aps flashs for a sec then nada, no fans, nothing.
Thought it was the PSU so I used a tester on the 400w and everything was fine. But I tried the 650w in my other computer anyway. Replaced the CMOS battery. Reseatted all the hardware. (Except the CPU cause I don't have any thermal compound here. But I know I didn't overpaste). tried without the VC and different RAM. Zero success.
I've seen other threads with the same problem with this board. Is there a flaw or something in this board? This is the first time I've ever had a problem with MSI, my other computer is on a 890FXA. Hopefully someone reads this can help me out.
Because everyone loves emoticons (is this last one flipping the bird?)
So I took the MB out of case , took out the CPU, polished the cooler (again, still looked grainy though), reapplied silver thermal compound, reseat. I plugged in the 24 pin and the 4 pin, prayed, turned on the power button on the MB, and...nothing. APS flashes for a second, CPU fan doesn't come on. Get this, though. When I plug in only the 24pin and not the CPU power connector, I get power. Light 1 on APS stays lit, CPU fan and PSU fan stay on. I turned off the power shortly after because I wasn't sure if this could cause any damage.
So, does this mean the problem is with the CPU? Is the MB refusing power to the CPU to prevent damage? I don't have a spare CPU to test with.
the 650w psu is a Corsair. -
NF750-G55 - BSOD from any enabled network adapter
Hello MSI community,
I am posting this from my phone as my system is BSOD if I enable my network adapter...
I've done multiple troubleshooting restarts disabling and enabling differant components and from I can discern it's the network adapter(s) causing it...
I'm using the built in NVIDIA nForce 10/100/1000 Mbps Ethernet device. I've updated all system drivers (as far as I can tell) from the Nvidia site. But if this device is enabled I'd get BSOD every 5 mins or so..
I disabled the NForce adapter and tried using a Belkin N Wireless device... But I'm also getting BSOD when that is enabled (which is using a completely different driver).
Has anybody heard of this problem? I'd be happy to upload more system info if needed, as long as my system stays stable long enough to transfer the info. >.<
Info I can provide:
BlueScreenView shows the crash as a UNEXPECTED KERNEL MODE TRAP in address ntosknl.exe+70740
this happens every 5 mins almost exactly.
Mobo: nf750-g55
CPU: AMD Phenom II x4
Memory: 4096mb Corsair DDR3 1333Mhz
The new installation that you did with the new motherboard seems to have a problem.
When you then install the motherboard drivers, try SafeMode.
Have a look in Windows' logs, under Admin..., for errors.
Please mention PSU and Windows version in the list of specs. -
MOVED: NF750-G55 CPU voltage adjustment problem
This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=143087.0Please provide more information for the rest of your system. >> Posting Guide <<
You are using +/- keys on numpad & not +/- next to 'Backspace' key ?
You should be able to get way over 1.2V, look at his thread: http://www.testseek.com/labs/reviews/review-of-msi-nf750-g55-motherboard/?p=2740 -
hi guys i have been given a msi nf750-g55 but the guy hasnt got the installation cd! can any one advise me how to get round this or know anywhere where i can buy one?
Thanks guys
robyou don't really need it,
you can find drivers http://www.msi.com/product/mb/NF750-G55.html#/?div=Driver&os=All
and utilities http://www.msi.com/product/mb/NF750-G55.html#/?div=Utility&os=All -
MOVED: MSI Nf750-G55 Epp/E.M.P/SLI support?
This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=141682.0Quote
Does the Nf750-G55 support EPP/X.M.P?
It definately does not support XMP Overclocking Profiles (they are for Intel Platforms only). You modules do not have EPP Memory Overclocking Profiles (NVIDIA Chipset Platforms).
Quote
And if it does how do i enable it?
As you do not have modules with EPP support and since your mainboard does not support Intel XMP Profiles, there is nothing to enable.
Quote
I also want to know if it allows you to adjust voltages
You can adjust voltage values manually in the Cell Menu.
Quote
When i try to change the CAS latency to 7 i cant post.
Well, either don't set the CAS Latency to 7 then or raise the memory voltage accordingly and make sure that the Command Rate is manually set to 2T/2N. -
MSI Nf750-G55 Epp/E.M.P/SLI support?
Does the Nf750-G55 support EPP/X.M.P?
And if it does how do i enable it?
I also want to know if it allows you to adjust voltagesQuote
Does the Nf750-G55 support EPP/X.M.P?
It definately does not support XMP Overclocking Profiles (they are for Intel Platforms only). You modules do not have EPP Memory Overclocking Profiles (NVIDIA Chipset Platforms).
Quote
And if it does how do i enable it?
As you do not have modules with EPP support and since your mainboard does not support Intel XMP Profiles, there is nothing to enable.
Quote
I also want to know if it allows you to adjust voltages
You can adjust voltage values manually in the Cell Menu.
Quote
When i try to change the CAS latency to 7 i cant post.
Well, either don't set the CAS Latency to 7 then or raise the memory voltage accordingly and make sure that the Command Rate is manually set to 2T/2N. -
hello all. im having a bit of an issue here. ive had this board for a few months now and ive just noticed this icon labeled motherboard temp. what is this exactly? ive included a screen shot. it says 82c. thats a little high isnt it? could it be a malfunctioning sensor. im using the latest stable version of HWINFO32. i also have a question about another sensor. the mcp temp. would this be the northbridge temp?
any help would be greatful.
pc specs:
amd [email protected]
8gb gskill @1333mhz
asus 560ti 950/1900/2200
msi nf750-g55 mbo
corsair ax850 psuI'm seeing oddball temps too on one sensor...
driving me nuts, it is.
HWINFO64 shows:
CPU: 39 (I'm running prime95 on it to test for stability...)
Auxillary:29
Motherboard:109
They are fluctating, so I know it's measuring SOMETHING... but 109C? Damn baby cook eggs on that!
Where on the motherboard is this sensor?
The heatsink to the REAR of the cpu slot is not hot, the one by the PCI/PCIE slots is pretty warm to the touch...
Maybe you are looking for
-
I turned on the ipad for the first time to charge and the apple symbol showed up then the itunes app with a picture of the charger pointing towards it. no matter what i do i can't get to the home screen
-
The loaded external.swf don't appears on two client connected in VideoCommunication...
Hi, everybody... I have to realize a videocommunication, whit Apache web server and FMS 3. This's ok... I have a button that load an external .swf but, when the 2 client are into communication, when I push the button, the external .swf starts only on
-
My adobe download assistant has stalled
Trying to install 30 day free Adobe Acrobat XI Pro trial and download has stalled
-
How to install a clean install with leopard upgrade DVD!
Does somebody know how to do an clean install with a Leopard upgrade DVD? I bought my MacBook for 1 week ago, and them said that i would get leopard sent later. And when i get it, its a upgrade cd that i cant install only leopard on my ny frsh hard-d
-
Hi experts, I am in "support project" now.I know how to create article (MM41).After creation of article when and where i will find the IDOC for article (WP_PLU01).After finding the IDOC number of the artilce what i have to do.I want