Re: No boot no bip no screen with new MSI Z87 G45 Gaming

What did finaly fix your problem ?
Here same issues, same keys. :
MSI z87-g45 gaming
hd7970mhz
2x4gb ram 1600 hyperx
850 thermaltake
120gb ssd samsung
system boots 5-10second, no display, close, reboot and stays on, no display.

With a single stick of the working ram installed, run memtest then flash the bios to the latest:
>>BIOSes<<
Memtest is included with the forum flash tool.
>>Use the MSI HQ Forum USB flasher<<

Similar Messages

Sound Problem With new motherboard Z87-G45 Gaming

2 days ago i bought a new motherboard msi Z87-G45 Gaming ,
when i started playing my favorite game (cs go) i noticed that the sound at the left and right are louder(way louder it even hurts me ears )
and the sound at the front and the back are just normal, i also noticed that quality of the sound is worse , so im wondering if the onboard soundcard is broken or has it to do with something else?
and yes the Realtek Hd Audio driver is installed
im using the onboard soundcard Realtek ALC1150
and the headset Siberia V2 Steelseries
I am new to the forum if i posted this in the wrong section or something i apologize
i also like to apologize for my bad english.

>>Posting Guide<<
Apart from Realtek you could install Sound Blaster Cinema.
Try to reinstall the drivers >>Realtek Downloads<< with the latest available.
Try different headset/speakers.

MSI Z87-G45 Gaming not entering setup or boot menu

Please someone help, I am getting no setup or boot menu, case & CPU fans come on, drives come on, led's come on, but blank screen.
I took out the graphic card & ram sticks, pulled the plug for leds & case fans, took all cables off HDD's, now only cpu & one stick of ram in dimm 2 connected + power switch.
plugged vga cable direct in MB, blank screen, then plugged cable in MB HDMI, blank screen.
tested monitor, ram & power supply in my sons computer which is a x58 LGA1366, all worked well.
I have no means of testing motherboard or cpu.
specs:
MB: MSI Z87-G45 Gaming
CPU: i5-4670k
RAM: Crucial Ballistix Tactical 1866MHz 9-9-9-27 1.5v
PSU: Corsair CS650M
I also tried another PSU a Thermaltake AP850W
P.S.
I have reset all i.e. pulled plug, taken battery out, pressed reset & shorted the two reset pins next to battery.

newer board are different they need at least a CPU to even show a code as they use that to activate the BIOS and if they do not have that it will FAIL to post anything as the board is used as a backbone as nearly all the important stuff is on the CPU itself (Processor, IMC, SATA controller, Network Controller, VRM (on Haswell), GPU and many other things) so it will fail to post as before it was only a processor but now there more of a system on chip really and has most of the important stuff that used to be on the Board itself so without that the Motherboard is just an electrical plane with impressively limited connections as all the good stuff is now on the Processor that you do not have!
There is not much that you can tell till you at least get that CPU as the board has nothing to work with as there is nothing to process the signals from the BIOS so its just a useless item so shows nothing.

MSI Z87-G45 GAMING.. does the killer networking work with Windows 8.1?

I was scrolling through the reviews for this board and someone mentioned in the reviews that the killer networking isnt supported with windows 8.1 yet.
Is this still true or are there updated drivers for windows 8.1 now?
Thanks.

There is a driver posted on MSI's website for 8.1.
http://www.msi.com/product/mb/Z87-G45-GAMING.html#download

PC freezes at BIOS with new MSI GTX 970 gaming

Went from a Windforce 670 to a MSI GTX 970 gaming, and the PC locks at the startup bios screen. I get 1 beep every 10-15 secs or so.
I've tried reseating the card, memory sticks, checking connections and nothing. If I put the windforce 670 back in, the pc is perfectly fine.
Specs
Windows 7 64 Bit
Intel i7 2600 @ 3.4 GHz
BIOS AMI 7.14
DDR3 ram 8gb @ 677mhz
Corsair GS600 PSU
Pegasus Corporation 2AC2 mobo

Hi,
Yes you will need to reinstall Operating System, type the activation key in, install fresh drivers etc. You can save documents, backup anything like installing packages for favourite software (e.g. CCleaner) but all other has to be reinstalled.
I would suggest Z97 PC Mate with i5 4690K, Cooler Master Hyper 212 EVO cooler. Personal budget choice but still with decent performane (quad CPU and OC availability). RAM+PSU+Case you currently have should work fine.

No boot no bip no screen with MSI Z87 G45

Hello,
My system was working perfectly until i chose to give the BIOS a look, and i tried loading the optimised defaults (F6). I rebooted the computer but nothing happened. The fans all work normaly, the mainboard seems to power up as usual, but nothing else, it just stays that way with no beep or screen detection, or reboot.
I tried clearing the CMOS by all possible ways (button or battery), with no success just a black screen. Can the optimised defaults break the mainboard ? Can i try to flash another bios with a usb key ? and if so how can i do it as i have no screen at all.
Thanks for any insight.

I experienced similar symptoms after trying to update the bios from v1.50 to v1.60 using the LiveUpdate method (NEVER DO THIS! USE MSI-HQ-Forum tool for USB flash!).
I tried every possible combination of configurations (through videocard vs on-board video, 1 vs 2 sticks of ram, all SATA-devices unplugged vs selectively plugged in, mobo in and outside the case,etc etc etc) and every solution I could think of (cmos clear with button, battery, jumper shortcircuiting, holding power button for a prolonged period of time to clear all left-over power, USB-stick with bios on it, MSI-USB flash program method, etc).
All with no luck, the board stayed locked in a boot loop. It powered up the fans, but never made it to POST. After +/- 30 seconds it would reboot.
So I decided to RMA, and my advice to you is to do the same.
Somehow, it might be a pci/peg configuration error, where a bios flash or in your case, a settings change to optimal, confuses the board after which it stops putting through video. I suspect this is the culprit because it seemed like the board was still functioning in a way. When I tried the USB-stick method, the LED light on the stick would blink indicating a read/write procedure. But, of course this is merely speculation.
Good luck to you!

MSI z87 g45 Boot up issues

So I built a computer for my sister and her husband and it has been having some boot up issues,Here are the computer parts:
wiindows 7 64bit
MSI Z87 G45 Gaming motherboard
INTEL CORE I-7 4770K 3.5GHZ
RADEON HD 5700 GPU
G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1866
kINGSTON 64 GB SSD ( spare part, not sure the numbers)
Sunbeam PSU-H680-REV-US 680W ATX 12V 2.0 Power Supply - OEM
Seagate Barracuda ST2000DM001 2TB 7200 RPM
ASUS Black 12X BD-ROM 16X DVD-ROM 48X CD-ROM SATA Internal Blu-ray Drive Model BC-12B1ST/BLK/B/AS
I've cleared both the HDD and SSD and now I'm looking to check the msi z87 g45 mobo, The computer starts up and sits on a2 for a while and then sometimes it fails to detect the SSD and says a0 and then I have to go back into the bios after I reset the computer again and maybe it detected the SSD and I can set it to boot from that again because it constantly changes the boot order, and sometimes it gives a blue screen when nearly into windows and then restarts, I had transferred some data from their old computer to this one and the data had virus's in it and I didnt know so I eventually found out and a day later and got rid of them all and the computer started behaving better but not fixed, faster mainly, I don't know if the virus may have altered some files so, I have a few more things to try, any help would be appreciated.
(Something I forgot to mention is that when I unplugg the HDD all the issues go away, the computer seems to work fine, But there are no issues with the hdd, ive tested it with seatools and I plugged it into my computer and restarted mant times as well as used my computer for a while and nothing, the HDD is fine, the start up on their computer sits on a2 for a long time when it isnt going to work and it only happens with the 2tb seagate HDD plugged in)

which storage drive holds the boot files the SSD or the HDD? the ATA mode of the BIOS needs to remain in the same mode it was when Windows was deployed to the storage drive. next the only way a BIOS settings will change with out user input is if the Li cell battery is going dead/the BIOS is getting reset frequently. sounds like you're about at square one, I'd format the Seagate 2TB HDD, install windows onto that either in RAID or AHCI mode whichever your preference, you can use the 64GB SSD as caching later if you use RAID mode, if AHCI the 64GB could be spare. I don't understand the SSD as boot drive method, it doesn't make sense the solid state storage is volatile meaning it degrades over time, the HDD isn't and the performance gain isn't going to change the way you use your PC. AHCI has it's advantages it's up to you. Following those steps is the only way you're going to keep the computer booting on a regular basis. You shouldn't need to manually configure which storage drive to initialize/boot from first, the BIOS automatically goes through your devices to find boot files then boots from the first one with boot files, it won't even try to boot from a device without boot files, because it can't. Just to reiterate the BSOD you speak of sounds similar to the ATA mode changing to something other than what it was when Windows was deployed to the device.

MSI Z87 G45 + MSI R9 280X + Windows 8.1 secure boot difficulties

After updating to Windows 8.1 Pro I had the "Secure Boot isn't configured properly" watermark as many others. I determined my disk is GPT partitioned, I enabled UEFI on the GPU by moving the physical switch from the 2 position to the 1 position, and enabled Windows 8 Feature + Secure Boot with standard settings in the G45 bios (ver 1.5). After doing save and reboot I'm presented with a blank screen with my monitor showing a "DVI no input" message. I reset the CMOS to allow me to boot again, but after a couple more tries with the secure boot settings such as enabling/disabling Fast Boot I have not been able to get it to work.
System:
MSI Z87 G45
8GB DDR3 1600mhz Crucial ram
I5-4670k
MSI R9 280X
Samsung 840 SSD 250gb
Asus cd/dvd drive

I want to know the same thing. I bought a MSI Z87-G45 Gaming motherboard this month and I can't activate Secure Boot on it because it's still in Setup Mode. I have no idea how to put the motherboard into User Mode and Google doesn't help me much further either. How to activate a key? I have a I5-5670K and GTX 770 by the way.

MSI Z87-G45 doesn't boot, doesn't beep

Hi guys,
I just received my new MSI Z87-G45 and put it in my pc with my Intel Core i5-4670K
When I first tried to boot, nothing happened, except the fans and the hard disk. It doesn't beep and I see no screen. I switched the RAM, removed the graphics card, removed the hd, nothing worked.
Just the fans are going on, but nothing else happens.
I had a look at the cpu socket and wasn't sure if it is how it is supposed to look like (my first intel board) so I attached a picture. The pins look kind of weird, not sure about them:
Any ideas what I could try?

Thanks for your replies.
I did a CMOS several times (everytime after removing a component) - didn't change anything.
I just wasn't sure if it's generally normal, that the pins are not straight upwards like on amd cpus. But I already saw on some other pictures that that seems to be normal. The pins are all equally and none of them is at another height level. So that doesn't seem to ba a problem.
Board: MSI Z87-G45 Gaming
Bios: Stock (not sure which one that is)
VGA: HIS AMD Radeon R9 280X IceQ X² Turbo Boost Clock 3GB GDDR5
PSU: Enermax Revolution X't ERX530AWT
CPU: Intel Core i5-4670K Box, LGA1150
MEM: Corsair XMS3 CMX8GX3M2A1333C9 (also checked with Kingston KVR1333D3N9/2G
HDD: none
OC: -
OS: none (old was win7, but I don't even get to the BIOS)
I also noticed that the case fan doesn't seem to get power. It doesn't move.
I have a speaker installed to the motherboard. My old board always beeped.
Thanks again for your help!

Z87-G45 Gaming - Boot error code A2 (stalled)

Hey folks,
I just purchased this board with an i5-4670k
I have a weird issue with the boot process. It doesn't occur at bios default values, only when I change them.
Here is the steps I do prior to get this stalled on BIOS load screen
1- I change the OC settings to get to either 4.2 or 4.4GHZ (1.29v for CPU 4.4ghz and 2v for input)
2- hit F10, save and restart
3- Boot normaly into windows.
4- Launch AIDA64 to stress test the system for 8h. Yes I did the 8 hours at first. It successfully passed the stress test.
5- I browsed a little bit.
6- I played battlefiled
No issue so far.
7- I shutdown the computer.
8- I then restarted it, and BOOOOMM. It stalls on the black screen, prior to the Dragon screen, with a A2 code in the lower right corner.
So I know the the OC is fine, since the stress test is OK for that long. I tried it several time, but only stressed it for 30min, then reboot and BOOMMM again. :/
So can someone, from MSI, help me?
Thx
System info:
MB: Z87-G45 Gaming
BIOS: v1.6 (Which I falshed from the BIOS menu)
CPU: i5-4670k
RAM: Corsair 8GB (1866MHz)
DISK: Kingston SSD 120GB, WDC 1.5TB SATA3, LG BD/DVD

Hey!
I decided to chip in since I have almost the same issue.
My PC boots to Windows and runs just fine apart from the 2second A2 debug code delay. Been playing games like BF4 for a good amount of time etc.
I just seem to be getting that same A2 debug code whenever I boot, seems to be the WD Caviar Red drive I just bought a week ago, already tried a few different sata and power cables, which dont help the case. When I unplug it the boot happens normally without any debug codes. Thing is the HDD seems to be working just fine, tested it with HD Tune Pro and CrystalDiskInfo. Also im not certain, but pretty sure that the A2 debug code only started happening after I installed a GTX 770 (day after the WD 1TB Caviar Red drive). Then again that doesnt make much sense? Since then it would most likely be an issue with the PSU, but seeing how I can play BF4 on high settings for 2hours straight it most definately isnt I think. My problem doesnt have anything to do with overclocking though, since I run everything on default.
Any ideas? And again, sorry for chipping in your thread. Just saw the same debug code problem and thought I shouldnt do a new one.
Specs:
i5 4670K
MSI z87 G45-Gaming
MSI GTX 770 TF OC 2GB (old gfx card HD7870)
8gb G-Skill Ripjaws 1333mhz
2x 120gb SSD (Kingston and PNY)
1x WD Caviar Red 1TB HDD

Z87-G45 Gaming not able to install Win7 x64 with Samsung 840 EVO

I have a brand new:
i5 4570
MSI Z87-G45 Gaming
250GB Samsung 840 EVO
1x 8GB Corsair ValueRam DDR3 1600
I got everything hooked up properly, but I am not able to install Win7 x64 through an USB pen drive (Kingston Datatravel 32GB USB3) I have a proper official and Legit MSDN ISO, formatted by the Win7 USB tool from MS itself.
Note that i do not have an optical device (DVD) installed so I cannot use it 'the old way'.
Bios settings are okay, everything is recognized
USB Legacy - Kingston Datatraveler
HDD Legacy - Samsung 840 EVO
Win7 setup loads properly; but before I can select the Harddrive / SSD to install Win7 on I get prompted that additional (3rd party) drivers are needed to proceed. The volume is not recognized. This happens 9 out of 10 times. In the 10% cases I do get the option to format the SSD and/or create partitions. However, installation fails after all, cannot load or find file ...
What I've tried so far:
Switch out the SATA cables and power cables
Switch through the various SATA ports on the MB 1 through 6
Tried UEFI and UEFI/Legacy (UEFI doesn't seem to work at all)
Update UEFI to V 1.50
All the above result in the case mentioned.
I have succesfully installed the SSD in an other PC, using the same pen drive and ISO and it worked like a charme, thus ruling out that the SSD, pen drive or image is corrupt.
Even when I switched out the SSD after Win7 setup has succesfully copied, unpacked and installed all the files (doing this on the other machine where it works like a charm). Then switching it to the MSI Z87...it fails; starting the setup procedure right from the start, like nothing was ever written on the SSD...
Finally i turned to Win8, and guess what, it installed without any glitches on the MSI Z87
What am I missing here, I would really want to install Win7 instead of Win8
Forgot to enable / disable something in the UEFI? I really don't know, google doesn't give much information on this specific problem (SSD is recognized properly by the BIOS / UEFI as far as I can tell)
The only thing I have not tried out so far is updating the Samsung SSD firmware to the 1.0 version which has been release 3 days ago...
Any clues, tips, hunches??

Quote from: Bernhard on 25-October-13, 18:33:41
Did you disable Secure Boot in the BIOS? If not, then Win7 won't load.
Hmmm not sure, thanks for the reply, will have to look into that later today!
I didn't change it from the default setting I think, unless it is part of the Win8 features in the UEFI. All where disabled by default, and I kept them disabled.
Where is Secure Boot listed in the UEFI, and any idea wether it is enabled by default?
::EDIT::
Found it in some screenshots, I cannot recall from the top of my head wether it was enabled or disabled, allthough my gutt feeling says it already is disabled.
http://cdn.pcper.com/files/imagecache/article_max_width/review/2013-05-31/09-MSI_SnapShot_23.gif
http://cdn.pcper.com/files/imagecache/article_max_width/review/2013-05-31/10-MSI_SnapShot_24.gif
Nice overview of the entire UEFI btw: http://www.pcper.com/reviews/Motherboards/MSI-Z87-GD65-Gaming-Motherboard-Review/BIOS-Features-continued

Help with OCing my MSI Z77a-G45 gaming with i7 2600k

Hi there its been awhile since ive done OC since my old intel e8400 and everything looks different now..i just recently bought a brand new Msi Z77a-G45 gaming MB and i7 2600k for good deal and would like to push my limits on this setup
Currently setup:
intel i7-2600k
8gb ddr3-1600 gskill ripjaw X Model F3-12800CL9D-8GBXL
MSI Z77a-G45 gaming motherboard
Antec Hcg-750 PSU
Evga gtx670 single card
my old rig Corsair H50 for now waiting on my custom built water cooling
i know i tried using the OC genie to test out their OC setting which gave me 4.2ghz with 1.336vcore and friend told me thats kind of high for a 4.2ghz?
any help will be good step by step. my goal for now is to reach like 4.4-4.5ghz until i get a better cooling system

Alrighty, appreciate the info; gonna back down to 4.4Ghz as I can maintain stability with 1.275 vcore in bios = 1.26 in windows = 1.24 under load resulting in hottest core never exceeding 70...was really hoping for 4.7-5.0Ghz overclock when most everyone who reviewed this chip in the early days was claiming such great overclocks with such low voltage. But I'll chalk that up to either misinformation or non stability checked overclocks, I guess I'm old school; cause if it can't hold up to a minimum 24hr pass of Prime 95 small fft's it isn't stable in my book. Might consider delidding it in a year or so once the new wears off, I had my i7 920 for about that long before I lapped it into a mirror shine lol. So based on my new information 3770k's on average overclock between 4.4-4.6Ghz and can require up to 1.4 vcore and higher past 4.6Ghz which is where you start to really become thermally limited on liquid as the Ivy Bridge's 22nm technology puts the cores to closely together in combination with intel's cheap ass thermal compound solution. Maximum recommended voltage for 24/7 shouldn't exceed 1.4 vcore without some kick ass cooling or a combination of delidded processor and kick ass cooling cause ideally you want your cores mid 70's and below...that about sum it all up?

Windows Vista and Windows 7 Only Boots to a black screen with a mouse cursor

Windows Vista and Windows 7 Only Boots to a black screen with a mouse cursor after I installed Mcafee Internet Security.
Hi I installed 1of 3 McAfee Internet Security protections on my HP laptop a few weeks ago with no issues. I Have a Dell XPS 420 desk top with Windows Vista operating
system, it’s never had any issues, until 2 nights ago I installed McAfee Internet Security (detected incompatible files and will remove) pc now only boots up to a black screen with a mouse cursor, it will show the windows logo and a hash symbol floating around
the screen. Now 2 weeks ago I installed the same program on my Dell all in one desk top with Windows 7, the same issue happen but that pc has no screen activity, I tried a back to factory reboot on this one, still black screen.

Hi,
Please install the compatible version of McAfee Internet Security:
http://home.mcafee.com/store/internet-security
if you have startup issue, you can boot into Safe Mode to uninstall the problematic software to go back into Windows.
Alex Zhao
TechNet Community Support

MacBook pro will not boot up. Blank screen with message File is possibly corrupted. Checksum does not match etc

MacBook Pro suddenly will not boot up. Blank screen with message File is possibly corrupt. Header checksum does not match, etc

Hi s.cheslik,
It seems your MacBook Pro will not boot properly and it displaying an error message. Based on the information you have provided, it appears your MacBook Pro needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
Apple - Support - Service Answer Center
Thank you for contributing to Apple Support Communities.
Take care,
Bobby_D

My laptop L2000 lance Armstrong only boots to a black screen with a cursor.

My laptop only boots to a black screen with a cursor. Can this be because the board numbers may be different then whats on the HD? I swaped a HD from a old and ugly L2000 to a new and shiny looking laptop! dbarselow

Boot from the first of the system discs (by holding down the C key until the welcome screen goes away) and, in Disc Utility, repair privileges. Not just permissions, but privileges. Then reboot at normal. That will probably fix it.

Re: No boot no bip no screen with new MSI Z87 G45 Gaming

Similar Messages

Maybe you are looking for