Re: No sound - split from "Playback" topic
i do not get sounds from contents online. my audio hardware is perfect as i can listen to music from my hard disk. but i cant hear online sounds
My OS is windows XP 32 bit
I use both chrome and also IE
System info:
1 GB RAM
my audio driver is realtek audio driver and my processor is Intel dual core
Sample URL is any URL from youtube
http://www.youtube.com/watch?v=YR12Z8f1Dh8&feature=fvsr
Similar Messages
-
RAM Advice [Split from GSkill topic]
Thank god for this thread. I just ordered G.SKILL DDR3 4x8Gb 2400MHz for the following set-up:
Intel i7 4790k @ 4.0
MSI Z97 Gaming 9 ac
After reading this thread about stability issues with overclocking and that my cpu doesnt even support 32Gb of ram at those speeds, I am almost certain I will return the G.SKILLS.
My main target with my build is to be as quiet and stable as possible while being a powerhouse. Keeping this in mind what is the best possible 4x8 kit I can get that is extremely stable? I have shopped around, and come to three options?
1. Kingston HyperX DDR3 PC12800/1600MHz CL9 4x8GB (KHX16C9K4/32X)
2. Corsair Dominator Platinum DDR3 PC12800/1600MHz CL9 4x8GB (CMD32GX3M4A1600C9)
3. Keep my G.Skill TridentX DDR3 PC19200/2400MHz CL10 4x8GB (F3-2400C10Q-32GTX) and run them at CL9 1600MHz (question is would this be as stable as getting sticks rated at cl9 1600?)
Is there anything I havent considered, is there a better option? I would love some help, and I need it fast if I am going to return the G.SKILLs for a refund.
Which sticks would you get?
Thank you for this thread so far!Quote from: ggwp on 02-September-14, 02:15:57
Which would you buy for my board?
Corsair Dominator Platinum DDR3 PC12800/1600MHz CL7 2x8GB (CMD16GX3M2A1600C7)
Corsair Dominator Platinum DDR3 PC12800/1600MHz CL9 2x8GB (CMD16GX3M2A1600C9)
Money is no issue here...
DDR3-1600 with CAS = 7 is not approved by JEDEC.
On the other hand, compared to 9-9-9-24, you'll get 1% performances boost and all kind of stability issues.
Of course, that kit rated to run with CAS = 7 use high quality chips (better than the other one with CAS = 9)
So I would buy the CMD16GX3M2A1600C7 kit and run them with 9-9-9-24 at 1.5V
Or maybe 8-8-8-24 at 1.55-1.60V (if rock stable). -
How to split left and right sound signal from SI READ Stereo?
How to split left and right sound signal from SI READ Stereo?
I want to display the left and right sound signal in two graph separately,what shall I do?
That is how to split 2D arry to two 1D arry?Hello,
Here's another trick...although the "Index Array" suggestion will work, you should investigate using the "Delete from Array" function...you can tell it to delete one of the columns (or rows), leaving one column (or row)...the function will output both the resulting array AND the deleted array, which happens to be the other row/column...this method might not be as intuitive, but it only makes one copy of data in memory, while the Index Array method makes two copies.
I hope this suggestion helps. I only found out about this trick with "Delete from Array" the other day.
Have a great weekend!
Sincerely,
Darren Nattinger
Applications Engineer
National Instruments
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman -
Can't get sound from playback of video from curve 8500 series
I video taped my daughter singing. I took it off my phone and placed it on my computer so I could post it online. I don't get any sound when I play it back on my computer using Windows Media Player. It keeps telling me the Network is too busy to playback in original quality, The picture is great but there's no sound. I'll try using Quick Time player but how do I get the sound back. Playback on my phone is perfect, sound and all.
PITT66,
Try doing a cleansweep and reinstall of the sound card. Follow these instructions to cleansweep. After you have finish reinstalling, try the EAX console again
http://us.creative.com/support/kb/article.asp?l=2&sid=72
Jason -
Sound coming from both speakers and headphones at the same time in probook 4440s
I have a Probook 4440s with windows 8 pro(64 bit) with IDT high definition codec installed. Yesterday when i was playing some songs i noticed that the sound was coming from both headphones and speakers even when my headphones are plugeed in and my lappy was having no such problems a few hours earliers while i was watching a movie. Please help..
It may be because you have both the internal speakers and headphones enabled at the sametime on your laptop. This might just happen automatically when you plug your headphones in. You need to manage your audio devices on your laptop.
Go to Control Panel> Hardware and Sounds> Manage Audio Devices> Playback Tab (which should already be selected)
In the playback tab there should be a list of all the audio devices you are using on your computer. Right click on the one you don't want to use and click disable. This should stop the sound coming from that audio device.
Remember: You will need to enable that audio device if you want to listen to sound through it again. Your internal speakers won't work once you enable them again. This might also be the case with your headphones. You may also have to do this every time your plug in a device or once you restart your computer.
Another note: Sometimes disabled devices will not show up on the audio device list so once you disable a device it will dissappear. This is an easy fix too. Just right click on an audio device and make sure show disabled devices and show disconnected devices is checked.
I hope this helps.
(I was using a computer with Windows XP to explain the instructions but it should be similar with your Windows Operating System. You may however have to play around a little on your computer because it may be slightly different) -
My iPhone is split from front panel on top, and back cover of my is swollen too. I am not able to use my phone and I cannot access my data in the phone. Please suggest what could be the cause of this problem?
It sounds like the battery might have gone bad, and is swelling and causing the symptoms you describe. Do not attempt to use the phone, but take it to Apple for evaluation.
-
I am using duel thunderbolt displays with a MacBook Pro. I only have the option to have sound come from one or the other. Has anyone thought of making the left channel come from both speakers on the left Monitor and the same of the right? If yes, how is that done? The MacBook Pro could even be a center channel if configured in that order.
See the following thread on the same topic:
2 Thunderbolt displays MBP = sound coming from both displays? -
Buzzing/whining sound coming from top left keyboard area...?
For a couple of months now (I think, I can't pinpoint when exactly this started), there has been an annoying buzzing/whining sound coming from the very top left part of my keyboard (I think). It happens when the computer is on and dies down once I turn it off but kind of does a very quiet "tick-tick" thing for a few minutes after shutdown. At first I thought it was the screen because it sounds like it's coming from the very bottom left corner of the screen (or the very top left corner of the keyboard, I can't tell)... but adjusting the brightness doesn't seem to affect it. It increases when I'm typing or moving the cursor and decreases when I'm not doing anything, but it's always present. I have checked my hard drive and everything's okay, so I'm not sure what it could be. Any suggestions would be greatly appreciated! Performance hasn't been affected (as of yet), so it's just more of an annoyance.
Another thing - for a while now (probably over a year), the screen has been flickering intermittently. It will go darker to lighter to darker to lighter quickly whether the screen has been on only a few minutes or several hours. This seems to have decreased lately, but maybe the two issues are related...?
I got my MacBook soon after they came out with the first black one, whenever that was.
Thanks for your help!Why not answer my question if you want help? Does your "ordinary keyboard that has midi capabilities" have a transpose function or a split keyboard mode that you may have accidentally activated? Did you try the solution I offered you?
-
Yesterday suddenly the sound output from my Headphone is not working
Hi, I've Mac Book Pro 15" with Retina display. Yesterday suddenly the sound output from my Headphone is not working. When I tried to solve this, I've noticed in system preferences it's jumping from Internal speakers to Head phone and vice versa. Can anyone help me on this issue please? I am using the original Apple Headset only.
Thanks
Babu
<Re-Titled By Host>Tell us:
OS X version ?
What may have changed prior to the onset of the issue of "... suddenly... not working..." and " ... preferences ... jumping from ..." ? Software added, upgraded, updated?
what precidely do you mean by " ... preferences ... jumping from ..." ?
ÇÇÇ
EDITadded
I see that your Question has languished for some period of time without response. You have posted your issue in Using Apple Support Communities whose topic is 'How to use this forum software's interface, features and/or how to find what you wish'. It is a relatively low traffic and inappropriate forum for your problem. I will ask our Hosts to move it to " MacBook Pro " where it may get a more rapid response from your fellow users.
endEDIT -
XPS 8700, Sound stuttering during playback
I have a new 2 month old Dell XPS 8700. I notice the other day a sound problem that is strange to say the least. When I play back a .flac or .mp3 file, the sound stutters. It's like it comes out in pulses once a second. It's quite un-listenable. Not sure when this started. I'm running Windows 8.1 fully updated as of 2/6/2015. The problem shows up with Windows 8 music player, Windows Media Player, Windows Media Center and vlc. All show the exact same playback anomaly. It also happens when I use the same players to play an .avi or .mkv video. The sound is bad no matter which audio port I use. I also get the same artifact using USB Headphones with their own DAC. What is weird about this symptom is that if stream Pandora, Somafm, or watch a youtube video, I do NOT get this symptom. The audio is perfectly fine. I ran the Dell PC Checkup and no problems are detected. Device Manager says all my drivers are up to date. Any ideas about what is going on and how to fix this?
Thanks in advance.I did. I tried the update, but it failed because I already had the update. I had installed it a few weeks ago when I was setting up the PC and downloading all the Windows, Office and Dell updates.
Ironies of ironies is that the failed update helped me resolve the problem. I thought I would uninstall the Realtek drivers via Device Manager which I did. But, before running the update again, I checked to see if the symptom was still present. The stuttering went away! Problem solved.
It seems that this is working with an Invidia sound driver from what I can surmise from Device Manager. So, I'm just not going to install the Realtek driver unless there is a change in the symptom. I'm beginning to think that it was the updating I did a few weeks ago that broke my sound!
Thanks again for helping. -
How can I transfer a sound file from my "Voice Memos" app on my iPhone to my iPad?
How can I transfer a sound file from my "Voice Memos" app on my iPhone to my iPad?
In iTunes with your iPhone connected, click on the iPhone device, select the Apps tab, scroll down to the File Sharing section and pick an app that plays Quicktimes ("Files Connect" works in this example, but I'm open to suggestions of better apps for playing transferred Quicktimes) and drag your Quicktime from Finder to the Documents pane for the File Sharing app. Once the file transfer is complete, go to the app on your iPhone to play the Quicktime.
-
I need to get sound events from sounds embedded in a MovieClip
I'm working on a SoundManager class for a game development
platform. Unfortunately, I can't leverage the Sound class because
the requirements are that the sounds for an application would be
embedded in individual MovieClip objects and set to stream as the
clip plays.
The idea is that this would allow third-party developers to
make simple edits to the sounds by using the envelope controls for
the embedded sounds. I can manually fire an event when the sound
finishes by calling a custom method in the last frame of the movie
clip, however, this is not completely accurate and it makes it
impossible to seamlessly loop sounds.
Now, the Flash player must be aware that the sound has
finished playing. I presume that sounds embedded in the IDE are
handled by the Sound class in some way. Is there any way at all
that I can expose an event when the embedded sound finishes
playing?
I'd really prefer to use another approach, and just attach
sound files from a Library or from external files, but I don't have
a choice in this particular case. This is the way the application
has to work.
I will probably have to give up on the precision I want in
order to complete this job on time, but I refuse to believe that
what I'm trying to do is impossible. I would appreciate any help
anyone can give me.You'll have to update your OS on your Macbook.
Click on the black Apple logo at the top left of your Mac screen. Then click on Software Update.
support.apple.com/kb/ht1338 -
DOWNLOADED SOUND CLIPS FROM MY LG PHONE, THEY WON'T PLAY
I DOWNLOADED SOUND CLIPS FROM MY LG PHONE. THEY HAVE A .qcp AT THE END. WHAT APPLICATION DO I USE TO PLAY THEM ? DO THEY NEED TO BE CONVERTED TO SOMETHING ELSE?
Try VLC Player...
http://www.videolan.org/vlc/
Also see...
https://discussions.apple.com/thread/1573850?start=0&tstart=0 -
I put a Griffin case on my daughter's iPod Touch 5 and now there is no sound coming from the speaker. There is sound when we use the headphones. Is there a mute function that I may have switched on and if so how do I turn it off?
It was a gift bought by her Godparents in January and I live in the islands so I can't just drive it back to the store to have them look @ it!
Called Apple Support and spoke to 2 people who seemed baffled and who could only suggest I reset the device. Who h has not helped.
HELP!!!!!!!- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit -
How can I create a function of sound volue from time using AudioQueueBufferRef??
I have a question how can I analyze class AudioQueueBufferRef, for creating a function of sound volue from time?? Here is what I get . there is AudioQueueBufferRef fillBuf = audioQueueBuffer[fillBufferIndex]; volume height is 2000 elements from SInt16* coreAudioBuffer = (SInt16*)fillBuf->mAudioData. so function looks like H(t*i)=coreAudioBuffer[i] where t = 1/sampleRate = 1/22050 but here is a problem. my program gets sound and uses a class AudioStreamer for this. AudioStreamer has 3000 lines when I play music from Free Internet Radio - SHOUTcast Radio - Thousands of Free Online Radio Stations. internet radio - my problem is as follows either I dont know where 85 % of sound information is or I dont know how I can analyze class AudioQueueBufferRef
Here is the code where I analyze Buffer.
{@synchronized(self)
if ([self isFinishing] || stream == 0)
return;
inuse[fillBufferIndex] = true; // set in use flag
buffersUsed++;
// enqueue buffer
AudioQueueBufferRef fillBuf = audioQueueBuffer[fillBufferIndex];
fillBuf->mAudioDataByteSize = bytesFilled;
// ======>in this place I analyze Buffer
if (packetsFilled)
err = AudioQueueEnqueueBuffer(audioQueue, fillBuf, packetsFilled, packetDescs);
else
err = AudioQueueEnqueueBuffer(audioQueue, fillBuf, 0, NULL);
when bitRate = 24 buffer has the following options int size=(fillBuf->mAudioDataByteSize) == 2000 double sampleRate=asbd.mSampleRate == 22050 numberOfChannels = asbd.mChannelsPerFrame == 1 it turns out that duration of play buffer float bufferTime =(size/numberOfChannels)/sampleRate == 0.1 number of buffers per second float numBuffersInOneSeconds == 1,5 duration of play all buffers per one second numBuffersInOneSeconds * time == 0.15 so it is 15 % of all information
as a result If buffer comes at 0.0 seconds he lasts up to 0.1 seconds.farther in my function there is no volume. second buffer comes in 0.7 seconds and lasts up to 0.8 seconds. but in reality the sound doesnt breaks. Maybe I'm doing something wrong .please tell me.
just for comparison
when bitRate = 32 buffer has the following options int size=(fillBuf->mAudioDataByteSize) == 2000 double sampleRate=asbd.mSampleRate == 22050 numberOfChannels = asbd.mChannelsPerFrame == 1 it turns out that duration of play buffer float bufferTime =(size/numberOfChannels)/sampleRate == 0.1 number of buffers per second float numBuffersInOneSeconds == 2 duration of play all buffers per one second numBuffersInOneSeconds * time == 0.2 so it is 20 % of all information
when bitRate = 32 buffer has the following options int size=(fillBuf->mAudioDataByteSize) == 1660 double sampleRate=asbd.mSampleRate == 44100 numberOfChannels = asbd.mChannelsPerFrame == 2 it turns out that duration of play buffer float bufferTime =(size/numberOfChannels)/sampleRate == 0.02 number of buffers per second float numBuffersInOneSeconds == 10 duration of play all buffers per one second numBuffersInOneSeconds * time == 0.2 so it is 20 % of all informationYou cannot write custom commands for expressions.
That being said, there are a couple of options:
Create a subsequence with a single step. Use a parameter of the sequence as "function parameter".
Create a custom step type including a substep module which implements the function. Add an edit substep to enable the user of the steptype to gracefully change the parameter.
Store the variable parameter in a local/file global variable and modify the value in each step. This will, at least, keep the "function" the same for every step.
Norbert
Maybe you are looking for
-
I am suddenly having a problem printing 4x6 photos. The print as though starting in the middle of an 8x10 sheet. I've checked and double-checked the print settings. Anyone else have this problem?
-
MS Office Starter No option for Change or Repair only Uninstall.
Re installed OS. No problem but lost MS Office Starter. Message that Q is being used and it must be empty.Tried as advised to click MS Office in program panel but only option was for Uninstall. No option for change or repair. Now what?
-
How create filter in olap universe with MDX LIKE Function
Hi all I need to create a filter in a olap universe with the LIKE MDX function. Problem: There is a dimension with account numbers whit 10 digits like this: 5683492703 and i need to create a filter whit all account numbers whit the number 7 in the si
-
Database Coonection in JDeveloper
Hello, I'm working with Jdeveloper 10.1.3 ADF Faces. In my ADF Faces backing bean class I read text File and i must insert it to Oracle DB Table: How to use existing connection (for example HRConn) which is already defined in Connections Tab in Jdeve
-
Whenever I select something, for example, I cannot see the marching ants selection until I either scroll up or down or zoom in or out. This occurs whenever I paste an image as well--nothing shows on screen until I scroll up or down or zoom in or out.