Re:No Special GL are defined for A/c.Type K

Dear Experts,
Good Morning to you,
I have a issue can anybody solve me please.
Issue: Cannot make deposit payment due to error message : NO Special GL are defined for account type K special GL indicator A for reconciliation account:12345.
So friend pls guide how to close this issue.
Awaiting for your golden replies & Have a nice day, points will be assign for useful answers.
Thanks in advance,
KUMAR.

Kumar,
It is not in OBXR it is belongs to OBYR.
While creating spl gl indicator we have to give alternative recon a/c and give link between recon to alternative recon a/c i hope you missed that configuration.
please check it it is uesful assign the points....
Raj.

Similar Messages

The valuation area defined for the plant is not defined in table T001K.

when i creating the PO for plant ,s/m is giving the following meassage
The valuation area defined for the plant is not defined in table T001K.

Hi,
You have two options to check:
Option---1: You defined your plant ( in t.code:OX10) and if then copy from existing plant(ex. 0001 0r 1000),check the plant not assigned to company code properly .Now assign in t.code OX18 and also check the table T001K after this configuration.
Option---2: Use t-code: OMWD, check whether your new plant ( valuation area) is assigned to valuation grouping code . If not assign the same .
Now try creating PO.
Regards,
Biju K

Re: No G/L accounts are defined for bank ICICI and payment method C

< MODERATOR: Message locked. Please read [this|Before you post: Rules of Engagement; before posting next time. use an appropriate subject... something other than what was copied from an email would be appreciated. >
Hi Friends,
When i am doing T.Code F-58 i am getting an error of
(No G/L accounts are defined for bank ICICI and payment method C) so could anybody please help me how to solve this problem awaiting for your reply friends.
Points will be assigned.
Thanks in advance.
KUMAR.

Hi Kumar,
You will have to configure the House Bank with T Code FI12 and further mention the payment method in FBZP. You will have to select one of the follwing as payment method, check/transfer/postal giro transfer/bill of exchange. Though check (C) is widely used.
Assign points, if useful.
Regards,
Saurabh Agarwal

No G/L accounts are defined for bank 24001 and payment method C

Hi SAP Gurus,
Iam getting error while cheque payment to vendor - No G/L accounts are defined for bank 24001 and payment method C, Message No.: F5459.
I have created the Bank A/c,Detail is House Bank No.24001, Account ID : 24001, Bank A/c No. 2111111111, GL A/c No. 40000000.
Kindly help for the above matter.
Regards,
Amitabh

Hi Amitabh,
As per the error you have not yet assigned your GL account for the particular Bank Account.
For example while giving payment by Cheque. Method is Cheque, GL account is Outgoing account right.
The entry would be
Cheque Issued Out Ac Dr.
To Main Bank Ac Cr.
You hv to assign both GL Account.
Please check Assign accounts to account symbols area.
Warm Regards,
Sivakumar Sathiyamoorthy

Error: "No tab group defined for launch configuration type "

Hi,
When i try to run my application its showing an error,
<b>No tab group defined for launch configuration type com.sap.ide.webdynpro.projectbrowser.launch.configtype</b>
but when i run my application by rightclicking on my application its working, instead if i use the tab on the upper panel of NWDS it throwing this error.
how to rectify it?
Thanks,
Suresh

Hi,
Following is what I assume you are trying to do.
1. You have a WebDynpro application which you want to deploy and run.
2. You are able to run your WebDynpro application by rightclicking on the application and running it.
3. You are not able to run the same application by clicking RUN option on the top.
If my assumption is correct, then I suggest you to follow your second approach.
If not, then please specify what kind of application you are trying to execute.
Ashutosh

Err "Only absence less than 1 day are allowed for this absence type

Hi Experts,
When I am creating IT2001 record for EL an error is coming, "Only absence less than 1 day are allowed for this absence type". Although Counting rule is defined properly and in check for Condition of absence <1 day & full day both are checked.
Regards,
Tomesh

Hi Nalla,
The remaining amount for Casual leave is not updated even after we apply the casual leave .
Suppose there are 20 CL quotas available. If we apply for 2 CLs then remaining should be 18.
Regards,
Tomesh

Problem Instanciating BO - No default attribute defined for the object type

Hello Experts,
I am instanciating the BO BUS2038 to ZBUS2038 and when I click in u201Cto implementedu201D and follow u201Cto releasedu201D the message No default attribute defined for the object type is appearing!
Can anybody help, please?

Hello everyone,
it appears to me, that no one has a clue about the "default attribute" and is widely guessing what can be done about that.
I feel deeply sorry for that, Marcos.
At first: You don't really need to care about the missing default attribute. If it's missing, the object's instance key will be used instead. Skip the warning message.
Secondly: The default attribute is used to display the instance within the "Object links & Attachments" under the work item preview when using the SAP Business Workflow.
Thirdly: You can select any existing attribute of your business object type to be the default attribute, by navigating to the "Basic data" (it's the heat-icon within the object builder), use tab "Defaults" and use the Input Help on the field "Attribute".
There you'll go.
Best wishes,
Florin

Eclipse- "No Tab group defined for launch application type/n

I was developing nicely on Web Sphere Studio Developer Version=5.1.0 (with eclipse Release 2.1.1) but I just started getting the error "No Tab group defined for launch application type/n org.eclipse.jdt.launching.localJavaApplication" when trying to run or debug. I was trying to parse&validate an XML file and getting a log of the Parsing errors.This might have done something. However, it was working before..Any ideas before deleting and reloading Eclipse?
Cigdem Savaseri-Brackmann

Hi Jin,
I'm having the same problem ... how you solved?
Thanks!

Class type not defined for this object type

Hi Friends,
Could u please guide me ?..We have a requirement to extract some data from classification system.
This is related with class type 023 - Batch
I want to use the following parameters in CTBW.
basis datasource :Z_BATCH_ATTR
class type : 023
object table :MCHA
Datasource type : ATTR
I am getting an error "Class type not defined for this object type" when i enter the above entries in CTBW.
The only way I'm being able to make this work is changing object table from MCHA to MCH1.
This solution does not fit me bacause MCH1 table dont have Plant as Key, and I need it.
Do you know what should I do to solve this?
Thanks in advance

Hi,
I believe we have to use the list of standard "Basis DataSource", as I'm also stuck with the same issue. Let me know what Basis Data source you selected in this case.
As I'm trying to extract Batch attributes from "AUSP" Table.
I have given class type= 023
Obj Table= AUSP
But not sure which "basis datasource" I need to select.
Thanks,
Satish

DW extension dev, what special attributes are available for setTranslatedAttribute

I'm developing an extension for Adobe Dreamweaver. Let's assume CC 2014+.
Part of the extension are new widgest that i would like to add.
Came by the notion of translated attributes, which allows me to program a special view for design time.
Through inspecting the existing code of the jQuery UI implementation i came by some attributes that are special and have meaning.
For example, using the following i can create a highlight over the segment of code that is affected by the widget:
ele.setTranslatedAttribute("outline", outlineLabel + ": " + widgetId);
ele.setTranslatedAttribute("outlineId", "unique");
ele.setTranslatedAttribute("outlineForSelection", "outlineForSelection");
ele.setTranslatedAttribute("hiliteChildrenOnSelect", "false");
There is even an ability to define a context button:
buttonContainer.setTranslatedAttribute("dwedit:hascontextbutton", "hascontextbutton");
buttonContainer.setTranslatedAttribute("dwedit:contextbuttonurl", JQuery.DesignTime.Widget.Base.getShowPanelIcon());
buttonContainer.setTranslatedAttribute("dwedit:contextbuttontooltip", dw.loadString("jquery/widget/tooltip/show panel"));
[This button can also later raise a click event, mind you that can be caught by listening to:
DWContextButtonActivate]
So...i can see none of this is documented anywhere.
And i'm looking for whatever i can get my hands on in order to enrich the GUI experience for my users.
So i wanted to know whether anyone knows of a better method than running around rev-enging the existing JS code to figure out what special attributes exist.
Also, is it only possible to set style, class and attributes in tranlsation...or for instance is it also possible to add html nodes?
Regards,
Gal.

yes, that sounds ok.
Patrick.

No depreciation areas have been defined for asset

Dear consultant,
By mistake from our user had deactivated Depreciation Area in T-code AS92 for Auc asset 1200005 please suggest
How can we activate Deprecation area ?
Because We already settled 350 line item in same asset and still 150 item we have to settle from this asset.
The problem is if I run any T-code related that asset getting error
No depreciation areas have been defined for asset 1200005-0
Message no. AA025
one more thing i want to tell you that this happend only for one asset not for entire asset class I check in IMG Setting is ok for asset class.

I tried doing this but I got an error:
Depreciation area 01, which you want to create as a new depreciation area in chart of depreciation TTHI, has no depreciation area defined for value takeover. This may be be correct for normal operation, however for the purposes of creating a new depreciation in the productive system, you have to enter a depreciation area whose values are used as base values for the new area.
Do you have another solution for this?
I hope anybody can help me on this issue.

Error:Data inconsistency: Area 10 for value takeover is missing

Hi,
I am posting AUC settlement thro T code AIBU from one AUC asset to other asset and i am getting below error.
Data inconsistency: Area 10 for value takeover is missing
Message no. AAPO 105
Diagnosis
According to its formula, depreciation area 33 is defined for mandatory takeover of values from depreciation area 10. However, depreciation area 10 was not posted during the current transaction (chart of depreciation PE1). This is not allowed.
Procedure
Check the specifications for the current transaction type.
I do not understand why this error message is appearing.
When i checked both the asset master does not have Depreciation area 10. But it activated in configuration. Is it possible to add the dep area 10 in asset master now?
regards
Suri

Hi,
I tried executing AFBN for Dep area 10, system throwing pop up message as"Define depreciation area correctly". The detailed information in POP is as given below.
Define depreciation area correctly
Message no. AU008
Diagnosis
Depreciation area 10, which you want to create as a new depreciation area in chart of depreciation PE1, has no depreciation area defined for value takeover. This may be be correct for normal operation, however for the purposes of creating a new depreciation in the productive system, you have to enter a depreciation area whose values are used as base values for the new area.
Procedure
In FI-AA Customizing, please check the value takeover rules for the depreciation area you are creating.
In config, there are totally 4 dep areas, 01,10,31 & 33 and which has defined as default dep areas in asset master, but when i try to create a new asset asset, in dep area tab, the default dep area are appearing only 01, 31 & 33. Dep area 10 is not showing,
Please tell me what could be reason, for throwing error in AFBN and why dep area 10 is not appearing while creating new asset master.
regards
Suri

Two idocs are created for one output message type

hi all,
we are communicating our sap idocs to external system using ALE.It is working smoothly.
Our problem raises here,
.idocs are creating at the time of output type attachment for purchase orders.But rarely,two idocs are creating for one message type.It means two idocs are created for same Purchase order.It makes complications for the external system.
anyone can help me pls?
thnks in advance..........

thanks jurgen for ur reply,
jurgen, the second idoc is not an "ORDCHG",It is the replica of first idoc.This one has also "ORDERS" message type.The only difference between these idocs are the time.It means the difference between the time field segments of these idocs have only three(3)seconds difference.We think that its from the system error.If it is not from the system error pls give me the explanation.
thanks in advance.......

Clarification on Account grouping -OMWN for 101 movement type

Hi SAP MM gurus,
In OMWN - Account grouping , I am not able to find any entry for 101 (Goods receipt for Purchase order B and with no consumption posting ) with Value and Quantity updates . There are entries for 101 movement type with special stock indicator but not able to find any entry for standard good receipt for Purchase orders ( No Special stock Indicator , Value and Quantity update checked , Movement type indicator B and No Consumption posting ). There are no issues with the accounting posting for goods receipt with standard purchase order with BSX being debited and WRX being credited. I am trying to understand the logic for this posting and I am not able to understand from where (customization settings) this posting is derived from. May I request your valuable inputs in understanding this logic.
Thanks in advance for your immediate response.
with regards,
Anandj

Hi there,
Not sure where you want to go... but here is a tip
Would it make sense to have value and qty update and no consumption ? it can either one or the other but not both.
Now in prg there are further checks that makes other option possible like a GR for PO that is not valuated.
Remember that these key determination behind the account grp / TE key is a kind of black box where the prg is hardcoded to sort out what keys to take.
I hope this helps... Cheers

LOCID is not defiend for Order data type ORDR

Dear All,
I am trying to load data in to Order forecast details in Dynamic
replenishment of SNC in the WEB UI, after entering the Product and
Customer location, when I clicked on GO system is giving the below
error.
Time series error in class /SCF/CL_ICHDM_DEMANDMN_DATAAXS
method /SCF/IF_ICHDMAXS_2_CNTL~SELECT
Access error for time series type DFC01, key figure CORDEROR, ODM
message: Parameter LOCID is not define for order data type ORDR
Could you please help me out what to do in this case.
I have re activated the following components mentioned, still system is
giving the above problem.
Activate Order Component
Activate Order Data Type
Activate Order Data Area
and
Activate Time Series Data Type
Activate Time Series Data Area
Thanks and Regards,
T.Muthyalappa

Hi,
Make sure you have proper authorization.(sometime system does not display the error but user don't have authorization to create/update/modify table entries to be on safer side assign SAP_ALL profile to your ID if it is allowed as per your company security process).
I think issue is with InfoObject 9ALOCID is not activated properly.
You need activate InfoObject 9ALOCID as mention i below step2 but it is better you follow below steps.
1) Then force generate ODM.
2)Go to transaction code:/N/SCA/TSDM09 enter time series DFC01 and select Radio button Activate Planning object Structure.
Regards,
Nikhil.

Re:No Special GL are defined for A/c.Type K

Similar Messages

Maybe you are looking for