Re Nokia E5 Issues and Problems

Hai 
I am using nokia E5 it have recently got updated
since then i am facing lot of problems and issues
1. it was showing phone memory full but nothing is visible in phone memory
2. when ever i open youtube and mp3 in other window volume key doesnt work in mp3
3.very recently ovi site is getting too worse when i ask topsearch top free is shows alll paid 
but suprisingly it says you are logged in and every thing but i cannot download
4.when ever i made my contacts backup in memory card i loose defaults ring tones
5. i couldnt configure my in.com mail on new mail upgrade.
and also previously when i ever i am composing mail and typing address at sender ( To , BCC ,or Cc) my mail contacts appeared but now it was showing my phone contacts whoes mail id are in thais
6. sending sms to group while sending a group sms to may in a mean while if at all we receive call of kept in charging all messages simply stays at OUT BOX as Defered and again for each i have to sent individually
7.when i kept delivery repors yes, when ever i receive message delivered rather than text appearing it just give me tone what i have kept for the meassage incoming ring tone.
8.when i strictly selecting SMS wht was the reasont to display email id in every contact if i accidently selected it it was converting sms to MMS and subscriber is killing my balance in an instance.
please help me to come out of this problems
thanks regards yor valuable customer

Firstly, this is a user to user support forum, so w are all Nokia users here.
I find issues starting following an updatecan usually be resolvd a hard reset. I suggest backing up your data only and not the settings. Then reset the phone using the *#7370# reset. Once done, check that the issues are resolved before restoring your data and reinstalling apps.

Similar Messages

  • I am very annoyed at the Creative Cloud set up and the non-stop issues and problems

    I am very annoyed at the Creative Cloud set up and the non-stop issues and problems!  I am paying monthly for this service and it is constantly failing in some way!  So far in three months I have had to uninstall and re-install Photoshop THREE times because it stopped working properly and Illustrator I have had to do that same to TWICE!  That isn't including the other apps that have had issues!  I don't have the time to constantly be un-installing and re-installing all or some of the Creative Cloud because your developers are not making a product that works consistently for the money you are charging!  It is costing me more than just this monthly fee!  And I am even less impressed with the fact that I cannot email someone for assistance in resolving these issues.  Really Adobe?

    Adobe contact information - http://helpx.adobe.com/contact.html may help

  • Lenovo USB 2.0 Port Replicator Freezes Issues and Problems

    Okay, I have THREE of these port replicators in my office, and ALL THREE have the exact same problem on various laptops(X1, T420, Edge 13) with various kayboard/mice.  I've been through all stages of the port replicator drivers on the various systems, and the issue is always there.  All laptop drivers are updated.
    Here is the issue: working away, and then bam, mouse and keyboard don't work.  I'm working in a external monitor only display setup.  I go to the keyboard/touchpad on the laptop and they don't work...however ctrl+alt+delete works on the laptop keyboard(not the regular one).  Then the touchpad works...but I can't click on any of the settings EXCEPT sleep.  When I press a button to wake it up, everything works fine.  Basic external keyboards/mice, no need for different drivers.
    The other thing that fixes everything is unplugging the USB connection from the port replicator and plugging it back in to the laptop(or unplugging the power to the port replicator). 
    The weird thing is that I took the keyboard and mouse and they are plugged into the laptop itself, NOT the dock, and I still get the same issue with responsiveness.  This happens on ALL the docks, so it's not a keyboard/mouse driver thing. 
    The one thing that's occuring to me is that maybe it's a weird display issue?  I haven't tried actually using the external or laptop keyboard to run commands while it's frozen...and I also haven't tried unplugging things from the port replicator one by one (such as unplugging the display cable from the port replicator, then the printer, then the ethernet).  I'll keep you updated if I get any further.  It's been like this for months, and my users are just doing the workarounds.  one thing is for sure...
    I'M NEVER GOING TO SUBSTITUE THIS PORT REPLICATOR FOR A NORMAL DOCK AGAIN! (although i have no choice with the X1). 

    Hi skrasher, welcome to the forum,
    could you please try the following to see if it changes the behaviour of the USB ports.  In Device Manager, with the port rep attached, disable the ability on each of the USB Root Hubs for Windows to disable the device in order to save power, restart the system and see if the problem still occurs.
    Let us know how you get on.
    edit; for clarity
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • N95 8Go (RM320) issue and problems after v30 updat...

    Hi guys, im starting this thread because i just updated my phone on NSU (Now hes running the v30 update). And actually, i just encounter some kind of "bug" at the start. I enter my PIN, Nokia hands are shacking, wallpaper appeared during 1 seconds....then, screen goes black during 8 seconds....and all icons appeared normally....i just would like to know if some of you got the same problem. Thanks to youtube, ive uploaded a video , so you can see how it is exactly. Http://fr.youtube.com/watch?v=rKhnd2TLEGs

    Hi, we are facing the same ... guess the firmware was written this way for v30. I hope future version upgrade will remedy this........
    N95-2, RM-320, V31.0.015, Vista
    Ovi Maps 3.0, PCSuite 7.1.30.9

  • Nokia 6500 (slide) and problems with Pc Suite

    Survey first:
    What version of Windows is being used?
    Windows Vista
    What Service Pack is installed?
    Service Pack 1
    What version of PC Suite is installed?
    7.0.8.2
    What is the connection method, cable, bluetooth or IR?
    I have both cable and bluetooth. Tried both.
    I have a problem connecting my phone to Nokia PC Suite. I know I get the connection because I was able to use update manager to install new updates to my phone. I also tried to reinstall PC Suite and it didn't help.
    Here is what happens, I will explain with screenshots. I just connected my phone via bluetooth or cable (doesn't matter - I get same results)
    http://img363.imageshack.us/img363/6322/84873498tp3.jpg
    PC Suite shows me that my N6500 is connected:
    http://img146.imageshack.us/img146/4341/39312796ad5.jpg
    Yet, if I click "Contacts" I get a contacts application with no contacts, while it shows that my nokia is connected. On my phone I have contact on the sim card as well as the phone. I copied them from sim and the in the view option check to hide the sim contacts. I got to at least show the ones that are on the phne, but it shows nothing:
    http://img146.imageshack.us/img146/1541/95660645in9.jpg
    Other stuff doesn't work too, like here is what happens when I try to Back-up:
    http://img170.imageshack.us/img170/4949/71941457xy9.jpg
    I also don't see anything in "Nokia Phone Browser" when I enter it through "My Computer"
    I really need it to work. How can I fix this problem?

    Just uninstalled the old version, downloaded and installed the latest version and I still have problems.
    I just noticed though that "Phone selector" sees both connections USB and Bluetooth and give me a choice which on to go with, but I can't high light ether one to go to a next page...
    http://img504.imageshack.us/img504/488/17101536an7.jpg
    One more thing. As you can see on the screenshot, one of the icons shows that my phone is connected, while the other one doesn't. I thought maybe that can help somehow..
    http://img528.imageshack.us/img528/307/70993540tn9.jpg
    Any ideas?

  • Nokia bluetooth disconnections and problems - solu...

    Ok whilst i've managed to get Navicore a lot more stable blueooth GPS AND OR bluetooth headset connections are still quite unstable.
    My attempts to get my three phone debranded to Nokia firmware becasue it is WAY ahead in terms of fixes have so far been refused by CW because they claim it is illegal/not allowed by three!
    Thought this might be of interest to some people as it claims that upgrading to Nokia 3.x definitely fixes the problems. But 3 do not have this update available on their network yet.
    Anyone care to comment- someone from Nokia for example?
    EDIT: removed linkMessage Edited by karim on 02-Feb-2006
    02:03 PM

    I agree seraphim, its a case of great phone shame about the 3rd party providers response to firmware changes! But why should they bother? people are tied into 18 month contracts, they get their money regardless!
    Interestingly i've also found Nokia that have improved the voice recognition technology, previously it would not recognize 'calendar', or 'trojan' (pizza place), or 'tung sing' (chinese) - what can i say i'm a bad cook!
    Now it recognizes them very successfully :-)
    Obviously lots more than just the bluetooth lockups, have been addressed.
    EDIT: removed linkMessage Edited by karim on 06-Feb-2006
    04:01 PM

  • A List of Issues and Problems in CS3

    I've been logging concerns I have with CS3 over the course of a few edit sessions. I'll list them and see if anyone has any solutions or ways to make these quarks a little more tolerable. (I'm coming from Pro 1.5 into CS3)
    My Current Configuration:
    Dual socket Xeon Quad-cores (8 cores total)
    4GB memory
    1TB storage drive
    Nvidia Quadro FX4600
    b 1. Can't scroll ahead on timeline when playing the timeline
    It used to be that I could advance my view forward or backwards while the timeline is played. Now it snaps back if I try to scroll outside the area currently playing back.
    b 2. No XDCAM EX Export
    I haven't found an adequate HD export at all in CS3. Does everyone just export uncompressed AVIs when they want to move to AE or Encore? Even a HDV export would be nice, but I don't see that either.
    b 3. Major Memory Issues
    I setup two static PSD files on top of a BMP without any effects or motion settings. Memory warnings came up stating memory was low. Looked at my stats in the Task Manager and I was running ~500MB of a Page File and ~2GB of used memory. Very odd. Set the memory settings in Premiere from performance to memory and it didn't help...
    b 4. Title Window Doesn't Hold Panel Positions
    Each time I open the title window, the configuration is different; the toolbars are usually squished off to one side of the window. Even after resizing these panels and closing the titler, it comes back with a different configuration.
    b 5. Title Window is Slow to respond
    I feel like I'm running Premiere's titler on an old Pentium when I go to add or change text. It lags so much, as if the processors are pegged out, but the computer isn't crunching anything. The processors don't even flinch at this process, yet the titler is furiously sluggish.
    b 6. Resize Program / Source Windows
    The scroll bars stay even when the enitre image at 100% is seen. Tons of gray area around the source window, but it still let's me scroll up/down/left/right... nothing there buy gray void. Why the scroll bars??
    b 7. STILL no batch render
    I've been wanting this feature back since v6.5. It was very handy to render out multiple projects unmanned using the Batch render. Why can't we have this in CS3?
    b 8. AfterEffects doesn't have support for XDCAM...
    I'm off topic a touch, but it does make one wonder how to transpose a XDCAM project from Premiere CS3 into AE CS3 when it doesn't have the ability to support it.
    Well, that's my rant. Any help in any portion of these blunders would be great. You don't have to respond to all of them, just reference the bullet numbers of interest and let's have a discussion.
    Thanks,
    Spires

    And what troubleshooting steps have you attempted so far?
    And updating your device's iOS is always optional.  No one forced you to do so.

  • Lotus Notes Traveler sync issues and problems

    No device
    Hello
    I could connect my Palm Pre2 to our company's Lotus Notes Traveler successfully.
    It is not as straight as on iPhone as my colleagues, the only point is to indicate completely the path to the Microsoft Exchange link, like:
    https://mycompany.mylotusname.com/servlet/traveler/Microsoft-Server-ActiveSync
    Then using my lotusnotesID and the Internet Password made it working REAL FINE.
    I could get my mailbox, agenda and contacts exchanged with the pre2, terrific!!!
    Some limitations though:
    1) Tasks and notes are unfortunately NOT WORKING at all.
    2) the calendar does not synchronize more than two weeks in the past, but it seems that in the Pre2, it is a limitation for any Microsoft Exchange server. I have another MS Exchange account, not the lotus one, and the limitation is the same, in the past NOT OLDER than TWO WEEKS!!
    (When i think that my Palm TX, Tungsten2, Palm W, etc, did synchronize 10 years of agenda, this is really sad that a new high tech device cannot make it!! I need to know what i have been doing last year or the year before in my professional life. iPhone sync shows EVERYTHING!!)
    MAJOR PROBLEM IS FOLLOWING
    This worked for about three weeks, and then I started to have a weird problem.
    It started on some received mails, and now it does it on every mail, all mails are shows properly in the mail list in the mail program: received from M.smith, on May 22, "Dear M.XXXX i think  ..." which shows the first words of the mail.
    So top display is ok.
    When i open the mail, it says "Retrieving Mail Text", it loops for 30 seconds back giving an error message and asking to try again. Trying again doesnot retrieve the body of the mail either.
    ==> NO WAY TO READ THE MAIL COMPLETELY!!
    It worked fine for the first three weeks NO PROBLEM AT ALL!!
    I have tried my Lotus Traveler account on an iPod and iPhone using the same MS Exchange configuration, and there
    NO PROBLEM AT ALL.
    So it is in the Palm Pre sync where something goes wrong.
    I reset my PALM completely, and created a brand new user from scratch, reconnected it to the Lotus Traveler account and I got the same error, so it is not a matter of database too large in the Pre2 or something else.
    It is INSIDE the PalmPre synergy sync itself.
    Reading my mail from other sources like Google mail, or from a POP account works like a charm.
    I don't know if someone at HP Webos can do something, but this is a message in a bottle.
    Jame from France

    Hi,
    I don't know what happened, but one of a sudden, on Monday afternoon, everything worked back ok again.
    I was about to show to a friend the famous message "cannot retrieve mail's body", but then the mail's body was retrieved from God knows where and it came direct on my pre screen.
    5 minutes before it didn't work, 5 minutes later it did work.
    I didnot change anything to my profile or pre or my lotus account.
    I just don't understand why this worked again.
    The only difference I can think of, but I am not 100% sure, is that when I "transfer" a mail to someone else; the message I send is truncated generally just after the list of the mail recipients;
    Sorry not to be able to say more than that, but it is weird for me too, how did it come to work?!?
    Rgds
    Jame

  • SunSolve Issues and Problem Downloading Patches

    Signed up for a SunSolve account a couple days ago and then purchased a 1 Year Standard Subscription today so that I could download patches and what-not.
    I activated the subscription and then added it to my SunSolve account.
    I then tried to download some patches like the one below with no success.
    NAME: Solaris 10_x86 Recommended Patch Cluster
    DATE: Aug/13/07
    When I try to download a patch I get the following message across the top of the window.
    You are logged in to SunSolve but are not associated with a valid contract. You have access to Free Patches and Content only.
    I have had no luck with phone calls or emails I need some help ASAP as I have to ship this server out tomorrow.

    I'm afraid that this forum is for issues with patch manager/smpatch/update manager.
    You may want to send an email to [email protected] for support in this matter.

  • Nokia Asha 200 SMS problem

    hello, 1 week ago i bought nokia asha 200 and problem is that when i get SMS its shows *some text missing* sms is not full and after several time its comes in complete view. is it operator problem or mobile softwere problem?? i had nokia c6 before this one and never had this problem... can someone help me?

    This is called concatended messaging
    http://www.google.com/url?sa=t&rct=j&q=concatenated%20messaging&source=web&cd=1&cad=rja&ved=0CCwQFjA...
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Nokia 5800 [ Screen and phone problems]

    I got a problem with my nokia 5800 screen,
    sometimes when my brightness is bellow 80% 2-3 flikering lines apear wherever i am ( home screen, watching a video, browser,call someone etc.)
    when brightness is at 80%  its normal always( maybe of the high brightness i may not see the lines)
    however this is annoying and i want to know if i can do anything about it !
    on top of that my phones shuts down suddenly on its own  randomly!
    the phone is functioning well running app without any problem and watching videos !
    skype

     The 5800 is getting on in years now so it's definitely a hardware issue your facing. Your best bet is to visit a Nokia Care Point and see if it's worth the cost of repair otherwise you'd be better off getting a new phone.
    Ray. 

  • Nokia E6 issues -- Screen lock and Connectivity

    I have two problems with Nokia E6. Struggling to get resolution
    1. My screens get locked automatically with 7-8 sec even though I set up the screen locking time in more than 1 minute. It goes in lock state even you have active application running like reading web page or email. I went to local Nokia priority center and restored to factory setting. Still no luck. I bought the piece in July and I am facing this issue from last 2 months
    2. From last 2 days, my internet connection is not working. Service provider has mentioned everything is fine with network. I rebooted the phone and tried to resave the internet connection setting, but no luck.
    Please help to resolve these issues

    To double-check you have Nokia Belle Referesh, please, enter *#0000# and give use your version. Furthermore, because this is related to MMS,
    which network operator do you use, in which country? Finally, because these MMS are send by someone,
    which phone is used by the sender?
    Is he on the same network?

  • Nokia Suite and Nokia 701 Cable Driver Problems

    Hi, I just bought a Nokia 701, and so far I love it, the only real problem I have is that I can't connect it with Nokia Suite through the provided cable, because the driver never get installed properly, everything OBEX fails to install.
    So the only real way I can fully connect my Nokia 701 with Nokia Suite is via Bluetooth, but the speeds are dramatically slower. So I'd like to know if there are others having this problem or if I'm the only one. And in case this problem is already known, will there be a solution for it soon?
    I also have a Nokia 5800 ExpressMusic and it has the same problem for ages. And it has never been solved, which I think it's pretty bad in a company the size of Nokia.
    Just to clarify I'm using Windows 7 at 64 bits, and the latest version of Nokia Suite (3.3), and I'm trying to connect a Nokia 701 and a Nokia 5800, and both get driver incompatibilities that can't be resolved by the automatic Windows 7 search, and can't be resolved by searching for it manually with Windows Update, Windows Compatibility Site says that Nokia 5800 ExpressMusic should be 100% compatible, but, maybe because of the fact that Nokia 701 is relatively new, there is no information on the Windows Compatibility Site, about the device.
    Please help me with this problem, it's very important for me to be able to connect both my cellphones via cable to the Nokia Suite application.
    A preemptive thank you for all your help.

    Hey Sevennikke7, Welcome to the Nokia Forums.
    To fix the problem, try the following solutions:
    disconnect the USB cable and connect it again.
    If you use a USB hub, try connecting the phone directly to the computer. 
    If you use a USB hub with an external power source, make sure that it has been switched on.
    Check the USB cable for problems and replace if necessary.
    If your phone asks you for the connection mode that you want to use, make sure that you select Nokia Suite(or PC Suite) on your phone.
    Disconnect the cable, restart the computer, and try again. 
    Keep in mind that if you remove USB devices without using the Safely Remove Hardware tool in the Windows taskbar, connection problems may appear.
    Go to Add/Remove Programs in Control Panel (called Programs and Features in Microsoft Windows 7).
    Select Nokia Suite in the list of applications and click Change/Remove.
    In the dialog that appears, choose Repair.Nokia Suite then check that all the needed files are intact and repairs any errors that were found. 
    Control Panel > Programs > Programs & features > Nokia Connectivity cable driver, right click and Change/Repair
    Try go Control Panel > View Devices > Remove your device profiles and reinstall them.
    As both devices cannot connect to your computer I believe it is a problem with drivers inside your PC.
    I hope this helps and you manage to resolve your issue. Please get back to me if your problem persists.
    Sheldrick
    Press the 'Accept As Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

  • Back from nokia repair centre and MORE PROBLEMS

    ok so this is my story....
    i sent it in 2 weeks ago on thursday they said "its beyond repair and a 'new replacement is being shiped'".... BULL no what they did is the replace some of the phones guts and sent back the old shell with the new inners...
    now the phone has major problems....
    1 wrong software for wrong phone type(not that major just that the software that they put into my "new replacement phone" is for the white and blue not the red and black)
    2 (fixed-ish Not really) the phone would make that beep when the volume is at its max when you press the volume rocker when on the phone.
    3 Extreamly slow...
    4 shuts off when making calls... SUCKS!!!!
    5 i now have 2 ovi stores...
    6 even the phones themes put in the wrong icons on the wrong apps...
    OVERAL NOT HAPPY WITH NOKIAS SERVICE I NOW REGRET BUYING NOKIA I THOUGHT THIS COMPANY WAS AWESOME NOW AFTER SEEING THAT SO MANY OTHER PEOPLE HAVE MAJOR ISSUES AND REARLY DO THEY GET FIXED THE FIRST TIME, DO I SEE THAT I SHOULD HAVE RUN A BACKGROUND CHECK AS I USUALLY DO EVERY TIME I BUY SOMETHING FROM A COMPANY
    its not too late nokia you can still make me and thousands of other happy... get great products out. get them right. even better idea get them right the first time. and MOST OF ALL listen to what your customers want

    its not too late nokia you can still make me and thousands of other happy... get great products out. get them right. even better idea get them right the first time. and MOST OF ALL listen to what your customers want
    You have to actually tell Nokia this is a users forum so your message in effect is not heard by Nokia .
         jje

  • N97 Issues - Nokia please read and address

    Hi All,
    I am a massive Nokia Advocate and have been buying and using the latest Nokia since the 2110e back in 1996.
    6 Weeks ago I purchased the 2 x n97s for my partner and I and I feel that Nokia has let its loyal customers down badly.
    I can get over all the small software related issues but when a phone can not perform the fundamental day in day out tasks it is a serious problem.
    Does anyone else have these same problems:
    1 - Microphone is terrible when on speakerphone. Person on the other line strugggles to hear you.
    2 - Phone does not always connect to bluetooth car kits. Both Nokia CK-7W and Honda Genuine Bluetooth.
    3 - Phone reception is on average 2 bars lower than most other phones.
    4 - Phone is slow and buggish compared to it's major competitors
    5 - GPS (Nokia Maps 3.1) goes in and out of satellite lock every few minutes and often freezes, making it impossible to navigate.
    6 - Nokia MMS take an extra ordinary time to send as compared with the n95.
    There are more issues, but these are the main ones.
    I understand most of these can and will be fixed with software updates, but it appears that some issues could very well be hardare related (eg microphone) and if this is the case Nokia has a real battle on their hands.
    Please Nokia, get this right as soon as possible, before your loyal customers and advocates have no choice and are forced to desert you!

    If you want Nokia to read this then you have to send it to Nokia. This is a public forum populated by other users like yourself.
    Use the "Contact us" link in the navigation bar at the top of all forum pages.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Maybe you are looking for

  • Problem in installing a HP network printer

    I have a P2055dn laserjet.  It is connected directly to the router on my network.  I have a computer that uses it regularly and I can install it on another one.  It goes thru the installation, finds the printer itself and when it's close to completio

  • How can I edit a pdf picture

    How can I edit a picture that is a pdf and not a photo?

  • I have an iphone4s

    My iPhone 4S isn't working properly Siri isn't working neither is my camera & plant thing on my keyboard also isn't there please help :(

  • Procedural/Workflow question

    Hi all, After finishing the CS6 Production Premium book, I decided to start afresh with the projects I am busy with. Last Friday we shot some more footage of one of the ships we are using. I have around 11 Scenes shot, a few takes of each. Following

  • Saving my program to a floppy disk

    I am trying to save my program to a floppy and disk and when I go to run the bytecode I get this error message: Exception in thread "main" java.lang.NoClassDefFoundError: a:\FirstProgram I don't know why. Any suggestions would be great.