Re: 'None' choice missing when reviewing apple id account in itunes wonder if anyone is facing the same thing?

I was reviewing my apple id on itunes as it was the first time the account was sign in itunes, happens that the 'none' button for the credit card section was missing. As i do not own any of the cards in the choice and i know that there suppose to be a 'none' button there, i am unable to so call finish reviewing my id.

settings - mail - send&receive - remove or uncheck the apple id.
This is happening because you guys are sharing apple id.  You would need to create a separate apple id to use for imessage and facetime.

Similar Messages

  • Am in the process of installing ios 7.0.4 for my ipad 2 however, all I see on the screen is the USB cable and an arrow which point to iTunes icon. It has remained so for more than 1 hour. When I put it off and switch it on again, I see the same thing

    Am in the process of installing ios 7.0.4 for my ipad 2 however, all I see on the screen is the USB cable and an arrow pointing to iTunes icon. It has remained so for more than 1 hour. When I put it off and switch it on again, I see the same thing appearing again. what sholud I do?

    This is the solution to your issue.
    I wish you the best of luck. 
    http://support.apple.com/kb/ht1808?locale=en_AU&viewlocale=en_AU

  • Just got a new iphone 5s trying to use the app store but it is telling me i am not connected to itunes so i connected to i tunes so when i go back to app store it is still telling me the same thing not connected or signed in  help

    just got a new iphone 5s and i am trying to get on the app store but it is telling me that not connected to itunes  when i connect to itunes it was fine then went back to app store it is telling me sign in to itunes store so i do that with my apple id and password but is still isn't working help

    Hi there wendyfromnewross,
    You may find the troubleshooting steps in the article below helpful.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Troubleshoot issues on an iPhone, iPad, or iPod touch
    If you haven't been able to connect to the iTunes Store:
    Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
    Note: Time Zone may list another city in your time zone.
    Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
    Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
    Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
    Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
    Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
    Try resetting (turning off and then on again) your Wi-Fi router.
    If the issue persists, try troubleshooting your Wi-Fi networks and connections.
    -Griff W. 

  • I cannot remember my secrurity question and when i created an account i didnt enter a rescue email. The wierdest thing was that it said i had to answer my sec question because it was my 1st purchase 4 the device but i had the device for 2 years.

    Please help ive had this problem for almost 2 weeks and i am getting realy frustrated

    From a Kappy  post
    The Best Alternatives for Security Questions and Rescue Mail
    1.  Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
    2.  Call Apple Support in your country: Customer Service: Contact Apple support.
    3.  Rescue email address and how to reset Apple ID security questions.
    An alternative to using the security questions is to use 2-step verification:
    Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

  • When I download something on my iPad will be loaded into the same thing on my iPhone. yes i have the same Apple ID but you'll surely be able to have the same Apple ID or?

    When I download something on my iPad it will be loaded into the same thing on my iPhone. yes i have the same Apple ID but you'll surely be able to have the same Apple ID or?

    Automatic Downloads...
    http://support.apple.com/kb/ht4539
    Settings > Store > Automatic Downloads > Music/Apps > On

  • I don't remember my iCloud username that was used when I set up my Iphone4s. I know my apple ID but that is not the same thing. I need it to activate my phone.

    I don't remember my iCloud username that i made when i set up my Iphone 4s. i do know my apple ID but according to my phone, it's not the same thing. When I sign onto icloud on my computer, it allows me to use my Apple id. Not on my phone though..

    Dear Apple Company.
    My name is Nguyen Tran Dai from Vietnam.
    i beg you Apple People can help me and understand my situation.
    i love Ipad, and dont have much money to buy a brand new so i had to buy a second hand
    i bought it from a Vietnamese girl by searching chotot.vn apps on internet on an android phone.
    we met together at a coffee shop. i test ipad air run very well, so i paid her 8 million 400 vnd. and i checked her icloud account, i have seen nothing so i didn't restore it at that time.
    when back home i restored it and it appeared the owner's account that asking me to sign in '' kich hoat ipad", i couldn't, i tried to give her many calls but she didn't answer me. now i feel i am tricked by her.
    i just quickly run to Apple store in Saigon asking people for help, but they said if i have something to improve that is my ipad, sorry, i do not have anything, when i bought it from that girl i asked her the received she said she lost it , and her box she left in her countryside far away from Saigon.
    now i see i am stupid and not good for technology, trust me , i love icloud as i have heard many people say it's good. but now i feel that is not good. i lost my money which i saved such a long time.
    my ipad infos is
    serial DM******FK15
    model A1474
    XU1***93-13003
    PLEASE help me
    my phone number in Vietnam is +******
    now i feel sorry for my money gone easily because of me dont know much about ipad.
    <Personal Information Edited By Host>

  • When i active my mac pro all i get is a white screen and  it loading .. and when it fully loaded it turns off and the same thing keep on happening again

    when i active my mac pro all i get is a white screen and  it loading and when it fully load its turn off , and it keep on doing the same thing for hours

    Hi Shahenaz,
    It's a little difficult to understand exactly what's going on with your mac based on the description you gave. Is there anything else you could add? Is it stuck in a reboot loop? Or is it just showing a white screen forever?
    I had pretty much the same problem a few days ago, and was worried my mac was screwed permanently, but I got it fixed up no problem!
    Follow these steps to try and troubleshoot/fix the problem.
    1. Boot into OSX Recovery Mode
    First, turn off your Mac. If it isn't responding, or is stuck in a reboot loop, just hold down the power button until it turns off, and you hear the fans stop. Then boot it while holding the Command and R keys. If it successfully boots into OSX Recovery Mode, continue with this step. If not, skip to step two. (My Mac couldn't successfully boot into the recovery mode, so I had to go to step 2)
    Select "Disk Utility" from the list of options, and find your built in hard drive from the list on the left. Usually there are two listings/names for your drive. The first should be something like "500GB longchainoflettersnumbers Media". Then the one below will be a little easier on the eyes, named Macintosh HD, if you haven't changed its name. That's the one you want, click it.
    Now go to the "First Aid" tab. Click on the "Verify Disk" button in the bottom right corner, and let it do its thing. Once that's done, hit repair disk, also in the bottom right corner. If your disk is corrupted, you may need to run the repair process several times, before it comes up completely clean.
    Once this is done, select Shut Down from the Apple menu and, once your Mac is completely off, turn it back on like normal. If it works, great. If not, proceed to step two.
    2. SafeBoot
    Sometimes, when a mac is acting up and doesn't want to start, all it takes is a safe boot, followed by a regular restart. Or maybe you recently installed a program that either has malicious or errored coding that's causing your troubles. This is where Safe Boot comes in.
    Turn off your mac, and reboot it while holding Shift. (If you want to see the process that's going on in the background, boot while holding Shift, Command, and V. This will enter something called Verbose Mode).
    If it boots successfully into Safe Mode, great. If you believe that there's a particular program that you recently downloaded that might be causing your trouble, now's the time to delete it. If not, just reboot normally and see if it works! If it doesn't, or if your Mac didn't even Safe Boot like mine, proceed to step 3.
    3. Fsck!
    For this step, you're going to be booting your mac into Single User Mode. I'm not going to go into details as to what this step does, but it works for some people. Here are the steps.
    Turn off your mac, and reboot it while holding Command and S. The screen should go black, and you'll see some white text run across the screen, wait a few seconds, until you see the command prompt. Now type
    fsck -fy
    and hit the Enter key. This will run a series of system checks, which could take a few minutes. Be patient on this part. Once it's done, it will show one of two messages:
    1. "The volume (your Mac) appears to be OK
    or
    2. "File System Was Modified"
    If you got message 1, type reboot and press Return. Hopefully your computer works after this - if not, proceed to step 4.
    If you got message 2, run the same command again until you get message 1. If it doesn't seem to be working, turn off your system and proceed to step 4.
    If you couldn't even boot into Single User Mode in the first place (like me), go to step 4 anyways.
    Step 4: Reset the NVRAM
    The NVRAM is another kind of RAM that stores data like the computer volume you had set before you turned it off, or the screen brightness, resolution etc. This memory is saved, unlike with regular RAM. Resetting it isn't harmful to your system, it will just put your screen brightness, volume, etc. to defaults.
    Turn off your Mac, and reboot while holding Command, Option, P, and R, and continue holding them down until you hear the computer restart again.
    I can't really explain why to do this step, I just know it works for some people, and seems to be what unbricked my MacBook Pro. If none of these steps, fixed your Mac, well the situation is looking pretty grim. Try setting up a meeting with a Mac Genius at your local Apple store. However, I know that many other people with these symptoms ended up having a logic board failure. Apple can swap out your logic board for a new one, but the price is pretty hefty, somewhere around $300 I believe.
    Well I wish you luck, I hope this helped you!

  • When I sign on to Safari, AOL appears and ADware starts streaming. The same thing happens when i go onto Chrome and sign on to AOL. How can I fix/ Thank you

    When I sign on to Safari, Aol appears with streaming adware. The same thing happens when I use Google Chrome and sign on to Aol mail. Is there anyway I can block ads and prevent safari from directing me to AOL without requesting it? I have A MacPro, Yosemite (10.10.2). Thank you

    First try
    Remove unwanted adware that displays pop-up ads and graphics on your Mac
    Next:
    Adwaremedic: Removes all known adware from your Mac
    If you can't download it since the malware is preventing it then see:
    https://discussions.apple.com/docs/DOC-7792

  • I updated Itunes today to the latest version. Windows 7 64bit. None of my drivers work and get an error when itunes starts, about registry setting for reading and writing dvds and cds missing. Anyone else have the same issue. I downloaded itunes again, re

    I updated Itunes today to the latest version. Windows 7 64bit. None of my drivers work and get an error when itunes starts, about registry setting for reading and writing dvds and cds missing. Anyone else have the same issue. I downloaded itunes again, reinstalled still have same issue.

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • My iMovie doesn't work. When I open it nothing comes up so I force quit but then it closes, and a message comes up to send to apple. When I try to reopen it, it does the same thing!

    Please hep me this is super aggrivating and I have no clue what to do!

    Hello BellzJay,
    Thank you for your question. It sounds like your iMovie window is not appearing when you open the program and force quitting it then reopening it does the same thing. I would recommend these staps in particluar to try from the following article:
    iMovie: How to troubleshoot "Application Unexpectedly Quit" messages
    http://support.apple.com/kb/ht3143
    1) Verify your software is up to date by running Software Update.
    The updates necessary to resolve the issue are those relating to QuickTime, iLife, iMovie and Mac OS X. If any of these updates are available, install the updates. After you install the updates, run Software Update again to verify there are no more updates for that application available.
    2) Disable non-essential QuickTime components.
    Navigate to /Library/QuickTime/ for a list of components currently installed.
    Temporarily disable any components that are not in the list below. You can disable the components by moving them to the Desktop or another folder outside of the /Library/QuickTime/ folder.
    Open iMovie and see if the issue is resolved. If iMovie no longer unexpectedly quits, check to see if an updated component is available, or contact the developer of the component for further recommendations.
    iMovie uses the following components, and should be left in the QuickTime folder:
    AppleIntermediateCodec.component
    AppleMPEG2Codec.component
    Note: There may also be a similar folder at ~/Library/QuickTime/ depending on the components you have installed. If this folder is available on your Mac, remove any components as instructed in step 2. Both of these locations hold QuickTime components. The components help you encode or decode different types of multimedia content.
    5) Run Apple Hardware Test and Disk Utility
    If you are experiencing unexpected behavior in other applications, check your hardware by using Apple Hardware Test. You can also test your hard disks using the Verify and Repair functions of Disk Utility.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • When is apple going to release a iPhone 5 alarm clock? The lack of accessories for the iPhone 5 is really making me wish I would have just kept my 4s.

    When is apple going to release a iPhone 5 alarm clock? The lack of accessories for the iPhone 5 is really making me wish I would have just kept my 4s.

    Hi - There is an alarm choice at the bottom of the clock app - is this what you are looking for?

  • I bought garage band from the app store and downloaded it to my mac mini. When i try to open a screen comes up explaining i need to down load missing files. I do this but when try to open GB again the same thing keeps happening! Can anyone help.

        I bought garage band from the app store and downloaded it to my mac mini. When i try to open a screen comes up explaining i need to down load missing files. I do this but when try to open GB again the same thing keeps happening! Can anyone help.
    Thanks
    Hugh Lockwood

    Hi, Hugo,
    In similar cases it helped to remove the GarageBand "Preferences" file from the User Library.
    Open the folder
        your home folder > Library > Preferences
    and move the file "com.apple.garageband.plist" to the Desktop.
    Then try again to launch GarageBand.
    Regards
    Léonie

  • Bug Report iOS 7 iTunes. Since it is repeatable on 3 iPhones and 4 iPads here, I'm sure others are experiencing the same thing. Apple, might want to take a peek at this. When a tv show or movie is deleted from Videos, the Videos app shuts down.

    Bug Report iOS 7 iTunes. Since it is repeatable on 3 iPhones and 4 iPads here, I'm sure others are experiencing the same thing. Apple, might want to take a peek at this. When a tv show or movie is deleted from Videos, the Videos app shuts down instead of returning to video playlist.
    Restarting videos works and looks like video is getting deleted.
    Just a bug report

    You might want to report that to Apple instead of to the other users in this forum.
    http://www.apple.com/feedback/iphone.html

  • My dad and i use the same apple id, when he recieves a call, hes phone and my phone ring at the same time, why?

    my dad and i use the same apple id, when he recieves a call, hes phone and my phone ring at the same time, why?  and how do i fix this

    Settings > FaceTime > iPhone Cellular Calls > OFF

  • Ive downloaded the latest version of itunes and now i cant open itunes. it says im missing something but when i go to download it again just to be safe it keeps saying the same thing and i cant open my itunes anymore

    I cant open my itunes. it said i needed to download the 10.5.2 version to be able to upload the songs to my new ipod (touch) and when i went to do that my itunes wont open at all. me and my mom tried everything. i even went on my brothers account to get at least some songs and his did the same thing even though i didnt download it to the newest version. after i downloaded the lastest version and tried to open my itunes it said it was missing something so i went and downloaded it again. i know that was probably bad to do but i didnt know what else to do. even though i went and did that it keeps saying that im missing something. i dont know what to do to get my itunes to work again and if ill have to redownload all my songs and videos again.
    Pleas help.
    Thanks much,
    Sammii

    Plug your iPod into your computer, it will begin to sync. Now check to see if the playlists have been added.
    If not, go to the songs tab under your iPod when it is connected to iTunes, Unless you have checked "Sync all songs (or something to those words)" you should have an option on what you can put on your iPod. Make sure to check the playlists that you want on your iPod.

Maybe you are looking for

  • NEED A SAMPLE BADI PROGRAM

    Hi everybody,     I am learning BADi'S, so i need a sample program so that i can do it and learn how to design and implement a BADI.   I am thankful if any body help me regarding this. waiting for reply. thanks and regards, mahaboob subhani shaik.

  • Complicated Formula Help

    I have a very complicated formula and I would really like to use MDSHIFT and SUM at the same time but I get a syntax error if I do. No idea how to write this without turning this formula into a 2 page nightmare. Here is what I'm trying to do: Sum up

  • RAW files not importing

    Hi I have lots of RAW images taken with a Canon G2 which iPhoto 6 doesn't import for me when I drag the files over. The camera is on the famous list of supported cameras (http://www.apple.com/macosx/upgrade/cameras.html). Why might these files fail t

  • HT202159 502 bad gateway

    Hi am trying to download os x mountain lion & keep gatting "502 bad gateway" error & will not let me download although I have logged in & paid. I've also had this problem with iTunes movies rental & purchase.  I'm not getting much love from Apple eit

  • Reading unknown number of bytes !

    Hi all ! I am trying to read unknown number of bytes from the socket.Meanwhile I need to process the bytes depending on the message type in the header.I get messages like this header,body,header,body header,body header,body.....the message type is sp