RE Order cannot be rejected after cancellation and reversal or subseq docs

Hi,
We cancelled the RE billing document, reversed the Goods Receipt, deleted the Delivery but are not able to delete or reject the return order.
The message displayed is: "Subsequent Documents already exist."
If we disregard the message and put a rejection code in place, the order still appears on the Billing Due list and is able to be billed.
I've considered that the sequence of deletion, the problem persists irrespective of the sequence.
Any idea why or what needs to be repaired.
Thank you.

Hi,
I increased the quantity and rejected the order. The order still showed up on VF04 and I was able to bill it.
As a part of the test I attempted to deliver it though and was unable to deliver the order.
I checked the order status after rejection:
__Overall Status: Being processed__
__Rejection Status: Everything rejected__
__Delivery Status: Not delivered__
__Overall delv Status: Completed__
__Bill stat. order-rel: Not invoiced__
__Completeness: All items complete__
Accounting Documents have been cleared and Customer Ledger looks fine too with the appropriate in outs.
Thanks

Similar Messages

Cancel and Reversal u2013 ARE1

Dear Friends,
The user has wrongly created and posted the ARE1 (wrongly combined the multiple excise invoices into single ARE1) and now wants to cancel the same. Selecting the u201CCancelu201D option (Tcode J1IA102), the system triggers the message 'In Process document alone can be cancelledu2019.
1) The system allows the Reversal of the ARE1 by making the Interest and Duty payable as Zero under the Utilization tab.I doubt this is OK?
2) Also after reversing the ARE1, when I tried to create the ARE1 referring the excise Invoices again the system triggers XXXXX/2009 excise invoice already referenced in XXXXX/2009 ARE document. Now I need to cancel the existing Excise Invoice & create New Excise and ARE1. Is this the right way to do it?
3) As the documents are not filed at the Excise, the option would be u2018Cancelu2019 rather than the u2018Reversal of the ARE1u2019? And Pl clarify when should we use the options Cancel and Reversal.
Thanks
Isaac

Dear friend,
In Export scenarios where ever duty benefits are their ARE1 reversal & calcelling have different meanings,
1. The reversal process means you are reversing all the related docuements in the process involved , hence the duty payables are reversed & even in case of bond , reversal entries are thrown.
2.Afer Posting ARE! always reverse is done if the ARE1 has to be cancelled, then cancellation is followed.
3. If posting is not done, direct cancellation can be done, else reversal is required.
Regards,
Akhileshwar K

Sales order cannot be rejected -problem log status item status is incorrect

Hi,
I need to reject this particular sales order, but when i try to reject it says to check the problem log which states that the item status is incorrect. It says subsequent documents exists for some lines even though no documenst are attached.
There were a delivery attached to this order earlier but that has been archived. I ran repors SDVBUK00 etc but nothin seem to sort this issue..
I just need to reject the whole sales order. does anyone know any reports or somethin to rectify this issue.
Thanks
Keshini

Dear Keshini,
Could you please update with the process of Delivery Document Archieved?
I mean, had you reversed the delivery (T. Code: VL09) and then deleted the items from reversed Delivery Doc (T. Code: VL02N), before deleteing the Delivery Doc?
Was there any subsequent document for Delivery Doc.?
Best Regards,
Amit
Note: Also, check with Copy-Control settings for Order-to-Delivery (T. Code: VTLA)
1. Field: Update Document Flow is marked ticked at
Item (Dialog Structure) --> Item Category --> Control data
2. Field: Pos./neg. quantity with entry "+"

Video cannot be played after exiting and reentering Apple's video app.

When I play a video in Apple's video app, leave the app and then reenter the app I cannot play the video anymore. The screen is just completely black, but the device is definitely active (e.g. the sign for assistive touch is still there). The controls that are normally shown after tapping the display cannot be coaxed to appear.
I used to have this problem under 4.3 already but then the video played if I used the controls in the taskbar (where the symbol for stopping screen rotation also is). But now these controls always start the Music app.
By the way, all videos were synced to the device after the upgrade.
Anyone else have this problem and have a solution? Any help would be appreciated.
I seriously wish I hadn't upgraded to iOS 5. No more MTG, no more chapters in audiobooks. It shouldn't be called an upgrade but a downgrade.

I'm having the same problem. I have been downloading and playing tikibar for over a year. Now, I can download it to itunes, but when I try to drag and drop it to my ipod, it says that it was not copied because it cannot be played on this ipod.
I recently had to import my music files after upgrading itunes, but I downloaded this episode after that. Audio podcasts work fine.
I tried right clicking and "converting" it to ipod. It did something, but I get the same message afterwards as well.

"cannot find file" after formatting and moving!!

Wanted to have iTunes library included in Time Capsule backup. So had to reformat external hardrives where all my songs are from Windows do OS. Copied everything on other HD, reformatted HD with OS, copied back all songs. HD still has same name "MUSIC", but iTunes cannot find files.
Changed in iTunes preferences the location of files to ensure it searches in the right place AND also replaced with text editor in "iTunes Music Library.xml" file all links with new address of HD (now after reformatting to OS I found it to be slightly different despite still same name).
But iTunes still cannot find the files. Everything is the same as before, HD name, directory structure, file names, etc. ONLY difference is it all is on "OS formatted" drive. Don't want to lose ratings and playlists of over 15,000 songs....is there still a solution?

The moment I "drag out" the Tunes Library File, then there is nothing left there, and when I open iTunes it is empty.
That's as expected. That file is the database iTunes uses that keeps track of everything, so when you then launch iTunes, it's starting from scratch.
I can import the Playlists from the XML and they do appear, but still no songs, all is empty. If I try to reimport from the new location, then they "do not fit into the playlists", meaning ratings etc. are lost.
Then you apparently didn't get the XML file edited properly; it's not easy to do.
Why does the simple location function in iTunes Preferences not work?
It does, when used as designed. The preference is where new additions (imports & purchases) will be stored. It does not change the location for existing files.
Put the original library file back. Then launch iTunes, Get Info on a representative track, and look at the path to where it thinks the files should be and compare that to the actual path. Any difference at all will break things. If there are differences (drive name slightly different, any difference in folder names/structure, etc.; letter case counts), try correcting them in Finder and see if that gets things working again. If not, then you'll have to use the Add to Library command to get back your tracks which will lose all your ratings, etc.
Where does iTunes save the links to the original files so it can simply be changed?
In the iTunes Library file, which cannot be manually edited.

Cannot log in after archive and install

Hello, everyone. ive been searching the support pages of the apple site for an hour and i cannot seem to find a resolution to this...
I just peformed an archive and install ad now i cannot log in. i think this happened once before and i called apple support and i was told to log in as root. the problem i am having is that the login window does not give me the option to change the user field, it only allows me to type a password. every time i type my password, the login screen shakes. so even if i wanted to type root into the user field, i cant. any suggestions would be greatly appreciated. thank you.
p.s. i was running tiger but lost my tiger disc so i am using the disc that originally came with my g5 which has panther on it...
dayna

Hi, Dayna.
1. Be sure the Caps Lock key isn't active: passwords are case sensitive. You may see an exclamation point on the right side of the password field if the Caps Lock key is engaged.
2. There was a similar problem if one performed an Archive and Install (A&I) of Jaguar (10.2) over Panther (10.3): see "Can't log in after installing Mac OS X 10.2 over 10.3." I've not heard of a similar problem with performing and A&I of Panther over Tiger, but it may be related. However, before trying the advice therein to perform the A&I without selecting "Preserve Users and Network Settings" you'd need to have a backup of your data, otherwise you risk losing everything in your account. IMO, the most expedient solution would be to buy a replacement Mac OS X Tiger disc. If there is an Apple Retail Store in your area, that would be the quickest place to purchase one.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

RAC database cannot be connected after Grid and RAC DB have been installed

Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 VMs (main VM rac1 and slave VM rac2) with Oracle Linux 5.6
according to the website http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
Grid and RAC database have been installed successfully for both VMs rac1 and rac2. I am using the slave VM rac2 to test Grid and RAC database.
I have run the commands as below:
[ora11g@rac2 bin]$ pwd
/u01/app/grid/bin
[ora11g@rac2 bin]$ ./crsctl status resource
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4000: Command Status failed, or completed with errors.
[ora11g@rac2 bin]$ ./srvctl config database -d racdb
PRCD-1027 : Failed to retrieve database racdb
PRCR-1070 : Failed to check if resource ora.racdb.db is registered
Cannot communicate with crsd
[ora11g@rac2 bin]$ ./sqlplus SYS/SYS
SQL*Plus: Release 11.2.0.1.0 Production on Sat Mar 10 14:07:07 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
Enter user-name: SYS
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
Enter user-name: SYSTEM
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
SP2-0157: unable to CONNECT to ORACLE after 3 attempts, exiting SQL*Plus
[ora11g@rac2 /]$ /u02/11g_db/ora11g/racdb/sqldeveloper/sqldeveloper.sh
In its GUI, the inputs are below:
Connection: C1
Username: SYS
PWD: SYS
Role: SYSDBA
Connection Type: Basic
Hostname: rac2.localdomain
Port: 1521
SID: racdb2
Test: failed. Network Adapter could not establish connection.
Browser url: https://rac2.localdomain:1158/em
Its output: cannot connect to the server at https://rac2.localdomain:1158/em
As we see the outputs for commands above, Grid is running at the beginning but now is not running. SQLPLUS and SQLdeveloper cannot connect with database. Browser url cannot connect to the console https://rac2.localdomain:1158/em.
My question is:
Do any folks understand how to solve the above 4 problems ?
Thanks.

Folks,
Hello. Thanks a lot for replying. The last 50 lines of the file "ocssd.log" is as below:
[ora11g@rac1 cssd]$ pwd
/u01/app/grid/log/rac1/cssd
[ora11g@rac1 cssd]$ ls
cssdOUT.log ocssd.log ocssd.trc
[ora11g@rac1 cssd]$ cat ocssd.log
2012-03-08 21:13:54.415: [    CLSF][1150617920]Destroying CLSF context
2012-03-08 21:13:55.418: [    CLSF][1150617920]Allocated CLSF context
2012-03-08 21:13:55.418: [   SKGFD][1150617920]Handle 0x7105660 from lib :ASM:/opt/oracle/extapi/64/asm/orcl/1/libasm.so: for disk :ORCL:ASMDISK1:
2012-03-08 21:13:55.418: [    CLSF][1150617920]Opened hdl:0x710d800 for dev:ORCL:ASMDISK1:
2012-03-08 21:13:55.470: [    CLSF][1150617920]Closing handle:0x710d800
2012-03-08 21:13:55.470: [   SKGFD][1150617920]Lib :ASM:/opt/oracle/extapi/64/asm/orcl/1/libasm.so: closing handle 0x7105660 for disk :ORCL:ASMDISK1:
2012-03-08 21:13:55.470: [    CLSF][1150617920]Destroying CLSF context
2012-03-08 21:13:56.472: [    CSSD][1685425920]clssnmlfmtlease: uniqueness 1331259161, gipc addr nm_rac-scan#192.168.137.35#36456
2012-03-08 21:13:56.608: [    CSSD][1685425920]clssnmvStatusBlkInit: myinfo nodename rac1, uniqueness 0
2012-03-08 21:13:56.697: [    CSSD][1685425920]clssnmvStatusBlkInit: myinfo nodename rac1, uniqueness 0
2012-03-08 21:13:56.754: [    CSSD][1685425920]clssnmvStatusBlkInit: myinfo nodename rac1, uniqueness 0
2012-03-08 21:13:57.425: [    CSSD][1685425920]clssnmlgetslot:lease acquisition for node rac1/slot 1 completed in 19380 msecs
2012-03-08 21:13:57.559: [    CSSD][1685425920]clssnmvDHBValidateNCopy: node 1, , has a disk HB, but no network HB, DHB has rcfg 226426240, wrtcnt, 89443, LATS 4294905400, lastSeqNo 89443, uniqueness 0, timestamp 1331258081/38436564
2012-03-08 21:13:57.559: [    CSSD][1685425920]clssnmvDHBValidateNCopy: node 2, , has a disk HB, but no network HB, DHB has rcfg 226426240, wrtcnt, 80216, LATS 4294905400, lastSeqNo 80216, uniqueness 1331259094, timestamp 1331259236/4294905820
2012-03-08 21:13:57.860: [    CSSD][1685425920]clssnmvDHBValidateNCopy: node 1, rac1, has a disk HB, but no network HB, DHB has rcfg 226426240, wrtcnt, 89444, LATS 4294905700, lastSeqNo 89444, uniqueness 0, timestamp 1331258081/38436564
2012-03-08 21:13:57.860: [    CSSD][1685425920]clssnmvDHBValidateNCopy: node 2, rac2, has a disk HB, but no network HB, DHB has rcfg 226426240, wrtcnt, 80217, LATS 4294905700, lastSeqNo 80217, uniqueness 1331259094, timestamp 1331259237/4294906920
2012-03-08 21:13:58.049: [    CSSD][1685425920]clssnmvDHBValidate2012-03-10 12:07:08.298: [    CSSD][471957248]clssscmain: Starting CSS daemon, version 11.2.0.1.0, in (clustered) mode with uniqueness value 1331399227
2012-03-10 12:07:08.300: [    CSSD][471957248]clssscmain: Environment is production
2012-03-10 12:07:08.300: [    CSSD][471957248]clssscmain: Core file size limit extended
2012-03-10 12:07:08.518: [    CSSD][471957248]clssscGetParameterOLR: OLR fetch for parameter logsize (8) failed with rc 21
2012-03-10 12:07:08.518: [    CSSD][471957248]clssscSetPrivEnv: IPMI device not installed on this node
2012-03-10 12:07:08.519: [    CSSD][471957248]clssscGetParameterOLR: OLR fetch for parameter priority (15) failed with rc 21
2012-03-10 12:07:09.675: [    CSSD][471957248]clssscExtendLimits: The current soft limit for file descriptors is 65536, hard limit is 65536
2012-03-10 12:07:09.675: [    CSSD][471957248]clssscExtendLimits: The current soft limit for locked memory is 4294967295, hard limit is 4294967295
2012-03-10 12:07:09.675: [    CSSD][471957248]clssscmain: Running as user ora11g
[ clsdmt][1088276800]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac1DBG_CSSD))
2012-03-10 12:07:09.821: [ clsdmt][1088276800]PID for the Process [5971], connkey 4
2012-03-10 12:07:09.822: [    CSSD][471957248]clssscGetParameterOLR: OLR fetch for parameter auth rep (9) failed with rc 21
2012-03-10 12:07:09.823: [    CSSD][471957248]clssscGetParameterOLR: OLR fetch for parameter diagwait (14) failed with rc 21
2012-03-10 12:07:09.847: [    CSSD][471957248]clssscmain: initgminfo done
2012-03-10 12:07:09.971: [    CSSD][1098766656]clssgmclientlsnr: Spawned
2012-03-10 12:07:09.971: [    CSSD][1098766656]clssgmEvtInformation: reqtype (13) cmProc ((nil)) client ((nil))
2012-03-10 12:07:09.971: [    CSSD][1098766656]clssgmEvtInformation: reqtype (13) req (0xadd7b20)
2012-03-10 12:07:09.971: [    CSSD][1098766656]clssnmQueueNotification: type (13) 0xadd7b20
2012-03-10 12:07:09.973: [    CSSD][1098766656]clssscGetParameterOLR: OLR fetch for parameter GIPC client trclvl (13) failed with rc 21
2012-03-10 12:07:09.975: [    CSSD][1098766656]clssgmclientlsnr: listening on clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=903cec19-00000000-5971))
2012-03-10 12:07:09.975: [    GPnP][471957248]clsgpnp_Init: [at clsgpnp0.c:404] gpnp tracelevel 3, component tracelevel 0
2012-03-10 12:07:09.975: [    GPnP][471957248]clsgpnp_Init: [at clsgpnp0.c:534] '/u01/app/grid' in effect as GPnP home base.
2012-03-10 12:07:10.044: [GIPCCLSA][1098766656]gipcmodClsaCompleteAccept: failed on clsaauthstart ret clsaretOSD (8), endp 0xade1aa0 [000000000000002f] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=e1fdf67e-e0b9ca68-5971))', remoteAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=e0b9ca68-e1fdf67e-5976))', numPend 5, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x1758, pidPeer 0, flags 0x603710, usrFlags 0x14000 }
2012-03-10 12:07:10.044: [GIPCCLSA][1098766656]gipcmodClsaCompleteAccept: slos op : mkdir
2012-03-10 12:07:10.044: [GIPCCLSA][1098766656]gipcmodClsaCompleteAccept: slos dep : No space left on device (28)
2012-03-10 12:07:10.044: [GIPCCLSA][1098766656]gipcmodClsaCompleteAccept: slos loc : authprep6
2012-03-10 12:07:10.044: [GIPCCLSA][1098766656]gipcmodClsaCompleteAccept: slos info: failed to make dir /u01/app/grid/auth/css/rac1/A2370613
2012-03-10 12:07:10.045: [GIPCXCPT][1098766656]gipcmodMuxTransferAccept: internal accept request failed endp 0xade0740 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=903cec19-00000000-5971))', remoteAddr '', numPend 0, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x0, pidPeer 0, flags 0x30613, usrFlags 0x10010 }, ret gipcretAuthFail (22)
2012-03-10 12:07:10.045: [ GIPCMUX][1098766656]gipcmodMuxTransferAccept: EXCEPTION[ ret gipcretAuthFail (22) ] error during accept on endp 0xade0740 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=903cec19-00000000-5971))', remoteAddr '', numPend 02012-03-10 12:21:34.610: [    CSSD][4216872704]clssscmain: Starting CSS daemon, version 11.2.0.1.0, in (clustered) mode with uniqueness value 1331400094
2012-03-10 12:21:34.612: [    CSSD][4216872704]clssscmain: Environment is production
2012-03-10 12:21:34.612: [    CSSD][4216872704]clssscmain: Core file size limit extended
2012-03-10 12:21:34.675: [    CSSD][4216872704]clssscGetParameterOLR: OLR fetch for parameter logsize (8) failed with rc 21
2012-03-10 12:21:34.675: [    CSSD][4216872704]clssscSetPrivEnv: IPMI device not installed on this node
2012-03-10 12:21:34.676: [    CSSD][4216872704]clssscGetParameterOLR: OLR fetch for parameter priority (15) failed with rc 21
2012-03-10 12:21:34.770: [    CSSD][4216872704]clssscExtendLimits: The current soft limit for file descriptors is 65536, hard limit is 65536
2012-03-10 12:21:34.770: [    CSSD][4216872704]clssscExtendLimits: The current soft limit for locked memory is 4294967295, hard limit is 4294967295
2012-03-10 12:21:34.771: [    CSSD][4216872704]clssscmain: Running as user ora11g
[ clsdmt][1123064128]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac1DBG_CSSD))
2012-03-10 12:21:37.926: [ clsdmt][1123064128]PID for the Process [6687], connkey 4
2012-03-10 12:21:38.276: [    CSSD][4216872704]clssscGetParameterOLR: OLR fetch for parameter auth rep (9) failed with rc 21
2012-03-10 12:21:38.276: [    CSSD][4216872704]clssscGetParameterOLR: OLR fetch for parameter diagwait (14) failed with rc 21
2012-03-10 12:21:39.171: [    CSSD][4216872704]clssscmain: initgminfo done
2012-03-10 12:21:42.815: [    CSSD][1144043840]clssgmclientlsnr: Spawned
2012-03-10 12:21:42.815: [    CSSD][1144043840]clssgmEvtInformation: reqtype (13) cmProc ((nil)) client ((nil))
2012-03-10 12:21:42.815: [    CSSD][1144043840]clssgmEvtInformation: reqtype (13) req (0x1a5a7160)
2012-03-10 12:21:42.815: [    CSSD][1144043840]clssnmQueueNotification: type (13) 0x1a5a7160
2012-03-10 12:21:42.822: [    CSSD][1144043840]clssscGetParameterOLR: OLR fetch for parameter GIPC client trclvl (13) failed with rc 21
2012-03-10 12:21:42.872: [    CSSD][1144043840]clssgmclientlsnr: listening on clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=45c3536d-00000000-6687))
2012-03-10 12:21:42.873: [    GPnP][4216872704]clsgpnp_Init: [at clsgpnp0.c:404] gpnp tracelevel 3, component tracelevel 0
2012-03-10 12:21:42.873: [    GPnP][4216872704]clsgpnp_Init: [at clsgpnp0.c:534] '/u01/app/grid' in effect as GPnP home base.
2012-03-10 12:21:43.190: [GIPCCLSA][1144043840]gipcmodClsaCompleteAccept: failed on clsaauthstart ret clsaretOSD (8), endp 0x1a5b10e0 [000000000000002f] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=c53aa194-7b930898-6687))', remoteAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=7b930898-c53aa194-5928))', numPend 5, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x1728, pidPeer 0, flags 0x603710, usrFlags 0x14000 }
2012-03-10 12:21:43.190: [GIPCCLSA][1144043840]gipcmodClsaCompleteAccept: slos op : mkdir
2012-03-10 12:21:43.190: [GIPCCLSA][1144043840]gipcmodClsaCompleteAccept: slos dep : No space left on device (28)
2012-03-10 12:21:43.190: [GIPCCLSA][1144043840]gipcmodClsaCompleteAccept: slos loc : authprep6
2012-03-10 12:21:43.190: [GIPCCLSA][1144043840]gipcmodClsaCompleteAccept: slos info: failed to make dir /u01/app/grid/auth/css/rac1/A3702366
2012-03-10 12:21:43.201: [GIPCXCPT][1144043840]gipcmodMuxTransferAccept: internal accept request failed endp 0x1a5afd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=45c3536d-00000000-6687))', remoteAddr '', numPend 0, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x0, pidPeer 0, flags 0x30613, usrFlags 0x10010 }, ret gipcretAuthFail (22)
2012-03-10 12:21:43.201: [ GIPCMUX][1144043840]gipcmodMuxTransferAccept: EXCEPTION[ ret gipcretAuthFail (22) ] error during accept on endp 0x1a5afd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=45c3536d-00000000-6687))', remot2012-03-11 11:17:15.417: [    CSSD][1249378048]clssscmain: Starting CSS daemon, version 11.2.0.1.0, in (clustered) mode with uniqueness value 1331479035
2012-03-11 11:17:15.418: [    CSSD][1249378048]clssscmain: Environment is production
2012-03-11 11:17:15.418: [    CSSD][1249378048]clssscmain: Core file size limit extended
2012-03-11 11:17:15.797: [    CSSD][1249378048]clssscGetParameterOLR: OLR fetch for parameter logsize (8) failed with rc 21
2012-03-11 11:17:15.797: [    CSSD][1249378048]clssscSetPrivEnv: IPMI device not installed on this node
2012-03-11 11:17:15.798: [    CSSD][1249378048]clssscGetParameterOLR: OLR fetch for parameter priority (15) failed with rc 21
2012-03-11 11:17:17.472: [    CSSD][1249378048]clssscExtendLimits: The current soft limit for file descriptors is 65536, hard limit is 65536
2012-03-11 11:17:17.472: [    CSSD][1249378048]clssscExtendLimits: The current soft limit for locked memory is 4294967295, hard limit is 4294967295
2012-03-11 11:17:17.473: [    CSSD][1249378048]clssscmain: Running as user ora11g
[ clsdmt][1098090816]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac1DBG_CSSD))
2012-03-11 11:17:17.517: [ clsdmt][1098090816]PID for the Process [5960], connkey 4
2012-03-11 11:17:17.573: [    CSSD][1249378048]clssscGetParameterOLR: OLR fetch for parameter auth rep (9) failed with rc 21
2012-03-11 11:17:17.574: [    CSSD][1249378048]clssscGetParameterOLR: OLR fetch for parameter diagwait (14) failed with rc 21
2012-03-11 11:17:17.586: [    CSSD][1249378048]clssscmain: initgminfo done
2012-03-11 11:17:17.617: [    CSSD][1141242176]clssgmclientlsnr: Spawned
2012-03-11 11:17:17.617: [    CSSD][1141242176]clssgmEvtInformation: reqtype (13) cmProc ((nil)) client ((nil))
2012-03-11 11:17:17.617: [    CSSD][1141242176]clssgmEvtInformation: reqtype (13) req (0x129d5160)
2012-03-11 11:17:17.617: [    CSSD][1141242176]clssnmQueueNotification: type (13) 0x129d5160
2012-03-11 11:17:17.619: [    CSSD][1141242176]clssscGetParameterOLR: OLR fetch for parameter GIPC client trclvl (13) failed with rc 21
2012-03-11 11:17:17.621: [    CSSD][1141242176]clssgmclientlsnr: listening on clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=38fc0b43-00000000-5960))
2012-03-11 11:17:17.621: [    GPnP][1249378048]clsgpnp_Init: [at clsgpnp0.c:404] gpnp tracelevel 3, component tracelevel 0
2012-03-11 11:17:17.621: [    GPnP][1249378048]clsgpnp_Init: [at clsgpnp0.c:534] '/u01/app/grid' in effect as GPnP home base.
2012-03-11 11:17:18.167: [GIPCCLSA][1141242176]gipcmodClsaCompleteAccept: failed on clsaauthstart ret clsaretOSD (8), endp 0x129df0e0 [000000000000002f] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=22574215-7bcb9bab-5960))', remoteAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=7bcb9bab-22574215-5919))', numPend 5, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x171f, pidPeer 0, flags 0x603710, usrFlags 0x14000 }
2012-03-11 11:17:18.167: [GIPCCLSA][1141242176]gipcmodClsaCompleteAccept: slos op : mkdir
2012-03-11 11:17:18.167: [GIPCCLSA][1141242176]gipcmodClsaCompleteAccept: slos dep : No space left on device (28)
2012-03-11 11:17:18.167: [GIPCCLSA][1141242176]gipcmodClsaCompleteAccept: slos loc : authprep6
2012-03-11 11:17:18.167: [GIPCCLSA][1141242176]gipcmodClsaCompleteAccept: slos info: failed to make dir /u01/app/grid/auth/css/rac1/A2554722
2012-03-11 11:17:18.168: [GIPCXCPT][1141242176]gipcmodMuxTransferAccept: internal accept request failed endp 0x129ddd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=38fc0b43-00000000-5960))', remoteAddr '', numPend 0, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x0, pidPeer 0, flags 0x30613, usrFlags 0x10010 }, ret gipcretAuthFail (22)
2012-03-11 11:17:18.168: [ GIPCMUX][1141242176]gipcmodMuxTransferAccept: EXCEPTION[ ret gipcretAuthFail (22) ] error during accept on endp 0x129ddd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=38fc0b43-00000000-5960))', remot2012-03-11 13:50:45.588: [    CSSD][1847344896]clssscmain: Starting CSS daemon, version 11.2.0.1.0, in (clustered) mode with uniqueness value 1331488245
2012-03-11 13:50:45.589: [    CSSD][1847344896]clssscmain: Environment is production
2012-03-11 13:50:45.589: [    CSSD][1847344896]clssscmain: Core file size limit extended
2012-03-11 13:50:45.812: [    CSSD][1847344896]clssscGetParameterOLR: OLR fetch for parameter logsize (8) failed with rc 21
2012-03-11 13:50:45.812: [    CSSD][1847344896]clssscSetPrivEnv: IPMI device not installed on this node
2012-03-11 13:50:45.813: [    CSSD][1847344896]clssscGetParameterOLR: OLR fetch for parameter priority (15) failed with rc 21
2012-03-11 13:50:46.364: [    CSSD][1847344896]clssscExtendLimits: The current soft limit for file descriptors is 65536, hard limit is 65536
2012-03-11 13:50:46.364: [    CSSD][1847344896]clssscExtendLimits: The current soft limit for locked memory is 4294967295, hard limit is 4294967295
2012-03-11 13:50:46.365: [    CSSD][1847344896]clssscmain: Running as user ora11g
[ clsdmt][1106819392]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac1DBG_CSSD))
2012-03-11 13:50:46.512: [ clsdmt][1106819392]PID for the Process [5598], connkey 4
2012-03-11 13:50:46.518: [    CSSD][1847344896]clssscGetParameterOLR: OLR fetch for parameter auth rep (9) failed with rc 21
2012-03-11 13:50:46.521: [    CSSD][1847344896]clssscGetParameterOLR: OLR fetch for parameter diagwait (14) failed with rc 21
2012-03-11 13:50:46.548: [    CSSD][1847344896]clssscmain: initgminfo done
2012-03-11 13:50:46.611: [    CSSD][1090939200]clssgmclientlsnr: Spawned
2012-03-11 13:50:46.611: [    CSSD][1090939200]clssgmEvtInformation: reqtype (13) cmProc ((nil)) client ((nil))
2012-03-11 13:50:46.611: [    CSSD][1090939200]clssgmEvtInformation: reqtype (13) req (0x196b6160)
2012-03-11 13:50:46.611: [    CSSD][1090939200]clssnmQueueNotification: type (13) 0x196b6160
2012-03-11 13:50:46.618: [    CSSD][1090939200]clssscGetParameterOLR: OLR fetch for parameter GIPC client trclvl (13) failed with rc 21
2012-03-11 13:50:46.621: [    CSSD][1090939200]clssgmclientlsnr: listening on clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=e5a0c08e-00000000-5598))
2012-03-11 13:50:46.621: [    GPnP][1847344896]clsgpnp_Init: [at clsgpnp0.c:404] gpnp tracelevel 3, component tracelevel 0
2012-03-11 13:50:46.622: [    GPnP][1847344896]clsgpnp_Init: [at clsgpnp0.c:534] '/u01/app/grid' in effect as GPnP home base.
2012-03-11 13:50:47.158: [GIPCCLSA][1090939200]gipcmodClsaCompleteAccept: failed on clsaauthstart ret clsaretOSD (8), endp 0x196c00e0 [000000000000002f] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=629302b2-9f0ad2aa-5598))', remoteAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=9f0ad2aa-629302b2-5616))', numPend 5, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x15f0, pidPeer 0, flags 0x603710, usrFlags 0x14000 }
2012-03-11 13:50:47.158: [GIPCCLSA][1090939200]gipcmodClsaCompleteAccept: slos op : mkdir
2012-03-11 13:50:47.158: [GIPCCLSA][1090939200]gipcmodClsaCompleteAccept: slos dep : No space left on device (28)
2012-03-11 13:50:47.158: [GIPCCLSA][1090939200]gipcmodClsaCompleteAccept: slos loc : authprep6
2012-03-11 13:50:47.158: [GIPCCLSA][1090939200]gipcmodClsaCompleteAccept: slos info: failed to make dir /u01/app/grid/auth/css/rac1/A8205079
2012-03-11 13:50:47.159: [GIPCXCPT][1090939200]gipcmodMuxTransferAccept: internal accept request failed endp 0x196bed80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=e5a0c08e-00000000-5598))', remoteAddr '', numPend 0, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x0, pidPeer 0, flags 0x30613, usrFlags 0x10010 }, ret gipcretAuthFail (22)
2012-03-11 13:50:47.159: [ GIPCMUX][1090939200]gipcmodMuxTransferAccept: EXCEPTION[ ret gipcretAuthFail (22) ] error during accept on endp 0x196bed80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=e5a0c08e-00000000-5598))', remot2012-03-11 14:15:32.370: [    CSSD][2372304640]clssscmain: Starting CSS daemon, version 11.2.0.1.0, in (clustered) mode with uniqueness value 1331489730
2012-03-11 14:15:32.383: [    CSSD][2372304640]clssscmain: Environment is production
2012-03-11 14:15:32.384: [    CSSD][2372304640]clssscmain: Core file size limit extended
2012-03-11 14:15:32.933: [    CSSD][2372304640]clssscGetParameterOLR: OLR fetch for parameter logsize (8) failed with rc 21
2012-03-11 14:15:32.933: [    CSSD][2372304640]clssscSetPrivEnv: IPMI device not installed on this node
2012-03-11 14:15:32.935: [    CSSD][2372304640]clssscGetParameterOLR: OLR fetch for parameter priority (15) failed with rc 21
2012-03-11 14:15:48.413: [    CSSD][2372304640]clssscExtendLimits: The current soft limit for file descriptors is 65536, hard limit is 65536
2012-03-11 14:15:48.413: [    CSSD][2372304640]clssscExtendLimits: The current soft limit for locked memory is 4294967295, hard limit is 4294967295
2012-03-11 14:15:48.421: [    CSSD][2372304640]clssscmain: Running as user ora11g
[ clsdmt][1119824192]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac1DBG_CSSD))
2012-03-11 14:16:21.102: [ clsdmt][1119824192]PID for the Process [7155], connkey 4
2012-03-11 14:16:22.219: [    CSSD][2372304640]clssscGetParameterOLR: OLR fetch for parameter auth rep (9) failed with rc 21
2012-03-11 14:16:22.221: [    CSSD][2372304640]clssscGetParameterOLR: OLR fetch for parameter diagwait (14) failed with rc 21
2012-03-11 14:16:27.367: [    CSSD][2372304640]clssscmain: initgminfo done
2012-03-11 14:16:43.377: [    CSSD][1140803904]clssgmclientlsnr: Spawned
2012-03-11 14:16:43.378: [    CSSD][1140803904]clssgmEvtInformation: reqtype (13) cmProc ((nil)) client ((nil))
2012-03-11 14:16:43.378: [    CSSD][1140803904]clssgmEvtInformation: reqtype (13) req (0x6964160)
2012-03-11 14:16:43.378: [    CSSD][1140803904]clssnmQueueNotification: type (13) 0x6964160
2012-03-11 14:16:43.389: [    CSSD][1140803904]clssscGetParameterOLR: OLR fetch for parameter GIPC client trclvl (13) failed with rc 21
2012-03-11 14:16:43.554: [    CSSD][1140803904]clssgmclientlsnr: listening on clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=f8ea6223-00000000-7155))
2012-03-11 14:16:43.555: [    GPnP][2372304640]clsgpnp_Init: [at clsgpnp0.c:404] gpnp tracelevel 3, component tracelevel 0
2012-03-11 14:16:43.555: [    GPnP][2372304640]clsgpnp_Init: [at clsgpnp0.c:534] '/u01/app/grid' in effect as GPnP home base.
2012-03-11 14:16:44.146: [GIPCCLSA][1140803904]gipcmodClsaCompleteAccept: failed on clsaauthstart ret clsaretOSD (8), endp 0x696e0e0 [000000000000002f] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=0448e4a3-ad06465f-7155))', remoteAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=ad06465f-0448e4a3-7132))', numPend 5, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x1bdc, pidPeer 0, flags 0x603710, usrFlags 0x14000 }
2012-03-11 14:16:44.147: [GIPCCLSA][1140803904]gipcmodClsaCompleteAccept: slos op : mkdir
2012-03-11 14:16:44.147: [GIPCCLSA][1140803904]gipcmodClsaCompleteAccept: slos dep : No space left on device (28)
2012-03-11 14:16:44.147: [GIPCCLSA][1140803904]gipcmodClsaCompleteAccept: slos loc : authprep6
2012-03-11 14:16:44.147: [GIPCCLSA][1140803904]gipcmodClsaCompleteAccept: slos info: failed to make dir /u01/app/grid/auth/css/rac1/A8989982
2012-03-11 14:16:44.147: [GIPCXCPT][1140803904]gipcmodMuxTransferAccept: internal accept request failed endp 0x696cd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=f8ea6223-00000000-7155))', remoteAddr '', numPend 0, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x0, pidPeer 0, flags 0x30613, usrFlags 0x10010 }, ret gipcretAuthFail (22)
2012-03-11 14:16:44.147: [ GIPCMUX][1140803904]gipcmodMuxTransferAccept: EXCEPTION[ ret gipcretAuthFail (22) ] error during accept on endp 0x696cd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=f8ea6223-00000000-7155))', remoteAddr[ora11g@rac1 cssd]$
My question is:
Could any folk find out the problem that Grid becomes not running after install RAC database ?
Thanks.

Cannot open Editor after installation and sign in to Adobe ID

I installed elements 13 on two computers. Then as directed, I signed up for an Adobe ID.
Elements works fine on one computer, but not on the other. On the one with the problem, I can access the organizer and use the organizer, but when I try to open Editor, I am asked to sign in with Adobe ID to activate the software, which I have done many times but still nothing happens. I signed in to check my Adobe account and I have a valid account, but still cannot open the editor. It just keeps asking me to sign in, which I have done many times and still cannot open the Editor.

Have you managed to update to 13.1 by loading the organizer, going to the Help menu and selecting Updates.. ?
The sign in process can be blocked by your system, you can try disabling your firewall to see if that is blocking you.
The following document is for CS but contains information that will affect elements too.
Sign in, activation, or connection errors | CS5.5 and later
Recently, an add on has been found to block the Adobe access - please see this thread.
How do I get past the required "sign in" requirement on Elements 12 EDITOR after entering my password?
Good luck
Brian

E-mail password being rejected after cancelling MobileMe

Hello there & thanks for your help,
A few weeks ago I cancelled MobileMe & since then I have had difficulties logging on to my e-mail account, taking a couple of goes. Now I am completely locked out as my password is not being recognised. I have deleted the account (after saving e-mails) but now cannot re-create the account because of the same problem. My AppleID & info except my usual password but not my e-mail. What to do??

Great news, thanks for the Star!
Might consider a free gMail account, IMAP if you like...
http://tinyurl.com/c84gd7
http://email.about.com/od/macosxmailtips/qt/et_gmailosxmail.htm

Open quantity in Sales Order did not update after cancelling Reserve Invoice

Client created Credit Memo with reference to Reserve Invoice but this did not update the open quantity in Sales Order. Client is using SAP B1 8.82 PL9. I tested this in SAP 9.0 and still same behavior. Is there a work around other than creating another SO?
I checked Document Settings and "Reopening Doc by creating credit memo based on Doc" is enabled.
Thanks in advance.

Thanks for the reply. How will the client be able to make new reserve invoices from the SO? They are trying to make partial reserve invoices from the sales order. I already suggested to just change the quantity in the reserve invoice before adding. But I have doubt because the SO might close prematurely before they complete the quantity in the SO because open quantity is much less then the quantity in SO.
SO Quantity: 100
Open Quantity: 40
Reserve Invoice 1: 60
Reserve Invoice 2: 40
SO closes before they can make Reserve Invoice 2

Cannot resize images after CS5 and CC updates

I recently installed Photoshop CC and the CC app recently updated both my own CS6 and CC. I find that I now cannot resize images using the "image size" dialog. Any changes I try to make in dimension or resolution are ignored. Has anyone else encountered this problem, or does anyone have any info which will help me discover what I am doing wrong? Before, I simply entered the resolution and size I wanted for the image. Now I cannot .I have tried suggestion here: e.g., deleting pixels when cropping, etc., but nothing seems to work for me.

Thank you, Mylenium. Just curious... the CS5 update was done before I had
the CC app. Some CS6 updates were done before I joined the CC (the CS5 in
my problem subject-line was a type--should have been CS6), and one through
the cloud. CC, of course, was all updated through the cloud. Am I to
understand that CC would have done something to my owned, personal version
of CS5, which has the same problem?
Not an auspicious beginning with the cloud if complete
uninstalls/reinstalls are necessary right off the bat. I wonder how often
this type of problem will occur using the cloud, which obviously now
monitors my personal version of CS6, as well.
isabelle ann

I cannot back up after restored and updated my iPad

First, my iPad2 ran on ios 4.3.3. Then I backed up it and kept its library and setting
Next, I restored and updated to run on ios 5.1.1.
The system (on iPad) asked me to set up as a new one or back up via icould or itune.
I surely chose the last one because of an old ios.
The picture of usb cable and itune figure then shown, so I plugged in with my PC and launched itune programme.
Wonderingly, it didnt have any buttoms which i could back up (plz see the piture below)
Q : What should I do for backing up it into my iPad?
PS : I have already followed this http://www.apple.com/support/ipad/assistant/itunes/#section_7 but it does not help!!!!!!
<E-mail Edited by Host>

Sunbeame wrote:
If it is during the warranty time, can I go to a store and get some help?
That is exactly what I would do with this situation. Like I said I have seen this problem before but I know that I was not able to figure out what the problem was.
Make sure that you are running the latest version of iTunes on your PC - and you could also try uninstalling and reinstalling iTunes to see if that helps. I just don't know if that will work or if that is the reason that you are seeing this.

MR Order with 09 created after MoveIn/Out Reversing

Hello,
After performing Reverse to a Move Out, the Meter Reading which Reading Reason was 03 (Final MR), the MR's Reading Reason is changing to 09, and not reversing with the Move Out. Why?
Is there any way to reverse this Meter Reading ,as a part of Reversing Move Out?
Thank you ,
Michael.

Michael,
No, it's not customizing. Once more: The reason is that genuine meter readings is not to get lost by the reversal of a move-in/-out. The user can decide whether the meter reading shall be kept or not. If not, the transaction EL37 can be used for a reversal of the meter reading. If you stick with the reading reason 09 and a new move-in/-out is done for the same day, the meter reading reason 09 will be put together with the reason 06/03 and does not disturb (also when not deleted) the working process. If then, The meter reading reason 09 can be deleted anytime, also when put together with the meter reading reason 06/03 by using the transaction EL37.
Kind regards,
Fritz

CANCEL and REVERSE EXCISE INVOICE

Hi ,
In J1iex , we have two options , (A05) cancel excise invoice and (A07) reverse excise invoice.
What is the difference betn them
Regards
Shrey

Hi,
For cancelling the whole qty is req. to be cancelled
but while reversing the partial qty can also be returned back....
All above will affect the posting in the different accounts..
Regards
Priyanka.P
AWARD IF HELPFULL

GR based Iv tick mark cannot be unchecked after a MIRO or MIGO

Dear Friends,
Pls provide your valuable inputs for the below:
When creating an import PO, GR based IV was not unchecked and PO got created,
later on MIRO for customs has happened and subsequently user realised that GR based IV needs to be unchecked.
I am of the opinion that once a follow on doc has been created the system greys out GR based IV . This can again be in change mode only after cancellation of the follow on doc and also making changes for GR based IV from mandatory to optional at screen layout for the particular T code ME22n .
Kindly correct me if i am wrong.. Is there any other way where we can solve this by not cancelling the documents?
Thanks
nandu

Hi
Cancel your invoice goto Transaction ME22N, you will be able to reset the GR-Based IV flag.
But if you have already done a GR and cancel that you will not be able to flag the GR-Based IV field.
So you can do for invoices but not for Goods receipt follow on documents
Thanks & Regards
Kishore

RE Order cannot be rejected after cancellation and reversal or subseq docs

Similar Messages

Maybe you are looking for