Re Organize Free Characters setting in Web Template
Hi All,
I need to re organize free characters order in Web Template.
Can any one please advise where could be the option in Web Application Designer to re organize the order of free chars.
Regards
karuna
As per my knowledge, there is no option to do this..
The free characteristic come in alphabetical order in ascending order.
If you want you will have to add a suffix like 1, 2 to bring it in desired order...
Similar Messages
-
Cannot set default web template
Hi
I'm trying to set default web template through SPRO -> IMG -> Sap NetWeaver -> B.I -> Settings for reporting and analysis -> Bex Web -> Set standard web template -> Ad hoc analysis.
It works fine in Dev, but in Production the system seems to ignore the setting!
Even when I write a dummy template that doesn't exist I get no error message !
Please advice
Regards
ShlomiD Nore did you found the way to do it ?
I still have the issue, whatever the place where I force the template, the queries on the portal does not use my specific template.
I tried :
pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bexwebanalyzer
(this one was working before upgrade to netweaver stack 17).
as well as
pcd:portal_content/templates/iviews/sap_bw_report_iview
and
pcd:portal_content/templates/iviews/sap_bi7x_report_iview
none works !
If you have the tricks share it with us. -
How to set default Web Template for BEx Query iViews in Portal?
Hi,
1) In SPRO you can set the Standard Web Template used, e.g. ZANALYSIS_PATTERN1.
2) I published a query to Portal and when it runs within Portal, I want it to use a different web template, say ZANALYSIS_PATTERN2.
I don't want to change the BEx Web Application Query String property for each iView to hardcode the template e.g. to "QUERY=TestQuery1&TEMPLATE=ZANALYSIS_PATTERN2"
I only want the query name in the iView
Can I set this somewhere in Portal? I tried changing the standard "BEx Web Analyzer" iView as mentioned in
http://help.sap.com/saphelp_nw70/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm (BEx Web Application or Query as iView in the Portal)
but it still seems to take the template from SPRO even after restarting J2EEHi,
I don't think anyone is holding back knowledge, I think it's sometimes difficult to filter out "good" questions as opposed to "bad" questions...
In any case, I don't think it's possible to have different default templates, eg one for the portal and one for the "rest". I'm afraid you'll have to either change each one on the portal or use one for all.
Cheers,
Dion -
How to set default Web Template for BEx Query iViews in BI Portal?
Hi,
1) In SPRO you can set the Standard Web Template used, e.g. ZANALYSIS_PATTERN1.
2) I published a query to Portal and when it runs within Portal, I want it to use a different web template, say ZANALYSIS_PATTERN2.
I don't want to change the BEx Web Application Query String property for each iView to hardcode the template e.g. to "QUERY=TestQuery1&TEMPLATE=ZANALYSIS_PATTERN2"
I only want the query name in the iView
Can I set this somewhere in Portal? I tried changing the standard "BEx Web Analyzer" iView as mentioned in
http://help.sap.com/saphelp_nw70/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm (BEx Web Application or Query as iView in the Portal)
but it still seems to take the template from SPRO even after restarting J2EE
(I just published this question in Portal forum but I think it belongs here instead since it is BI Portal - apologies for the double-post..)D Nore did you found the way to do it ?
I still have the issue, whatever the place where I force the template, the queries on the portal does not use my specific template.
I tried :
pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bexwebanalyzer
(this one was working before upgrade to netweaver stack 17).
as well as
pcd:portal_content/templates/iviews/sap_bw_report_iview
and
pcd:portal_content/templates/iviews/sap_bi7x_report_iview
none works !
If you have the tricks share it with us. -
Hello,
We are trying to change the standard web template to a web template we developed in the WAD.
In transaction RSCUSTV27 we put the WAD technical name in the field Ad hoc analysis (=TMPLID_BCAST) but when I run ad-hoc report I'm still getting the standard template (0analysis_pattern)
Please Advice,
AmirOnce you set the default template you need to restart the J2EE Engineen to get the effect.
thanks.
Wond -
Setting up Default web template for BeX 7.0 queries.
Hi Experts,
I am running a web-report based on a query created using Query Designer 7.0. I have a default web-template that I have been using for BeX 3.x queries [which has been created using WAD 3.X] and I tried to set the same template as default for the BeX 7.0 in SPRO>SAP Netweaver>Business Intelligence>Settings for Reporting and Analysis>BeX Web>Set Standard Web Templates>Ad Hoc Analysis.
But I can't see the changes being reflected in the web report after I made the change.I still see that the default template 0ANALYSIS_PATTERN is being used. Can we set a web template created using WAD 3.x as the default template for 7.0 Queries?If yes, do I need to do something else apart from the changes I did in SPRO?
Thanks
Arvind
Edited by: Arvind Pattabiraman on Apr 29, 2009 8:51 PMArvind,
Have you migrated your template to 7.0 ? you cannot use a 3.x template as the default for a 7.0 template... unless you are using the EP6.0 iView / ABAP stack for running your queries on the web...
Edited by: Arun Varadarajan on Apr 30, 2009 12:29 AM -
We are using Portal and BI for Netweaver 2004s.
We want to create our own Web Application Template to be used for Ad-hoc analysis. We have created the template in the WAD and named it "ZZ_0ANALYSIS_PATTERN_T001".
We have entered this Template name into the IMG for "Set Standard Web Template" in the field for Ad-hoc Analysis(TCODE RSCUSTV27)
I expect that whenever I use the BEx Web Analyzer iView that this template would appear. Instead whenever I preview this iView the "0ANALYSIS_PATTERN" Web Application Template is displayed. I also have found that the "0ANALYSIS_PATTERN" Template is used if we click on "BEx Web Analyzer" from the Business Explorer Workset.
FYI - I have SAPALL on the BI system and in the Portal: bi_showcase, business_explorer_showcase,business_planning_showcaseHi Heike,
Could you please guide me through how I'd go about changing the template used in iView ?
I'm getting an error: "<i>Web template error in specifications for the Web item report Parameter REPORT for the Report Web item in the Web template is empty or missing</i> " [and it's using 0REPORT_DEFAULT_TEMPLATE] when I execute a query from Query Designer... from what I'm understanding is that perhaps the iView template is using 0REPORT_DEFAULT_Template even though my SPRO setting is set to 0ANALYSIS_PATTERN for AdHoc.
Thank you!
Fionna -
Chaps,
We've got couple of Templates built for BW Reporting.
Now, in the SAP Portal I noticed that the BW reports are shown in different customized web templates.
My question is,
(1) Can we have multiple Web Templates published in SAP Portal for different BEx reports ?
(2) If there is a default setting for the Web Template that we do in RSCUSTV27 T-Code, how can we still have multiple Web Templates for BW Reports in Portal ?Hi,
You can use different web templates for your BEx Reports depending on your requirement. You can include your reports in webtemplates and then integrate these web templates in portal by creating Iviews.
The setting you make in Transaction RSCUSTV27 is for setting the Standard web template. This will be used
when you execute a query in BEx Web Analyzer ( from Query designer).
when you integrate a query in portal by providing the query name (instead of providing the web template name)
By default the standard web template used is 0ANALYSIS_PATTERN. You can override this using transaction RSCUSTV27 or SAP Reference IMG under SAP Netweaver -> Business Intelligence -> Reporting-Relevant Settings -> BEx Web -> Set Standard Web Templates.
http://help.sap.com/saphelp_nw04s/helpdata/en/f9/7f12403dbedd5fe10000000a155106/content.htm
Regards,
Hari
Edited by: Hari Krishnan K on Jul 29, 2010 3:55 PM -
About web templates inside the portal
Hi !
I need your help because I would like to do something and I cant do it, even after reading a lot of documentation.
I would like to display my lovely web templates (made with the Web Application Designer) inside the portal, through the BI > Bex Web Analyzer. But there, I can only open queries, views and infoproviders.
Is there an easy way to display my web templates in the portal ?
Thanks for your help,
Best regards.Hi Cedric,
The setting of web templates for BEX is available in BI.
You can check IMG setting in the SPRO transaction, setting up the BEX templates.
There you can define the tchnical name of the template.
After the changes been done, remember to restart the ABAP stack.
Regards,
Prashil -
How to make a web template as standard template
hi,
we are trying to make the custom web template as the standard template. So, that it would be the basic template when we create a new template.
could anyone let me know how to make the template as default template
Thanks,
raghavendra pothulaHi:
Try that one in SPRO.
here are steps if u need them.
SPRO
SAP Reference IMG
From here, open tree:
SAP Netweaver
SAP Buss Info Warehouse
Reporting Relevant Settings
BEx Web
Set Standard Web Templates.
Here add for Adhoc analysis and others if needed.
Ram Chamarty
Message was edited by: Ram Chamarthy -
Hi,
We are using both 3X & 7X Web Templates in our BI System.
TCode where i can find the DEFAULT WEB TEMPLETE(3X & 7X) that is being used in system
ThanksHi suser1234, To assign/check the default template: Transaction SPRO > SAP NetWeaver > Business Intelligence > BEx Web > Set Standard Web Template. The following objects refer to the default templates pattern (most commonly used ones). Go to RSA1 > Meta Data Repository. The following objects would be available in either Activated Objects or Business Content. If you need to edit them & customize according to your requirements; like say you need to work on 0ANALYSIS_PATTERN web template, edit it using Web Application Designer. You may check out this [link |/thread/1151337 [original link is broken];also for your reference.
Object type Valuation Description (short) Description (long) Technical name
0 Analysis Analysis 0ANALYSIS_PATTERN
0 Analysis Pattern Exp Analysis Pattern Export 0ANALYSIS_PATTERN_EXPORT
0 Special Analysis Pat Special Analysis Pattern Export 0ANALYSIS_PATTERN_EXPORT_SPEC
0 Analysis Pattern - F Analysis Pattern - Filter Information 0ANALYSIS_PATTERN_FILTER
0 Special Analysis Pat Special Analysis Pattern - Filter Information 0ANALYSIS_PATTERN_FILTER_SPEC
0 Footer Web Template Footer Web Template for SAP Standard Templates 0ANALYSIS_PATTERN_FOOTER
0 Header Web Template Header Web Template for SAP Standard Templates 0ANALYSIS_PATTERN_HEADER
0 Analysis Pattern for Analysis Pattern for ICP 0ANALYSIS_PATTERN_ICP
0 Special Analysis Pat Special Analysis Pattern for ICP 0ANALYSIS_PATTERN_ICP_SPECIAL
0 Analysis Pattern: In Analysis Pattern: Information 0ANALYSIS_PATTERN_INFO
0 Special Analysis Pat Special Analysis Pattern: Information 0ANALYSIS_PATTERN_INFO_SPECIAL
0 Analysis Pattern - S Analysis Pattern - Special Variant 0ANALYSIS_PATTERN_SPECIAL
Note: Just a word of caution, editing standard templates will affect look/patterns of all queries/reports in your system. Thanks!
Edited by: Arun Bala G on Oct 25, 2010 11:39 AM -
Migrating Web Template from 3.x to 7.0
We have a set of Web Templates that we created in BW 3.5 system. Now it has been upgraded to Bi 7.0
I can still see the template in Web Application Designer (WAD) 3.5 but when I open WAD 7.0, I can't find these Web Templates.
How Can I migrate these 3.x Web templates to 7.0 Web Templates?
TIA
AbhishekOpen WAD and do a search with 3x web template tech name. Open your template and save it in WAD 7. Until you save in WAD 7, web template will remain in 3x.
Also try opening the template through program
RS_TEMPLATE_MAINTAIN and check if they work fine...
Did you guys have Java stack installed or ABAP stack? If it's ABAP stack, you can't use web template in WAD 7.0. You have to use it in 3x WAD.
assign points if it helps..
Edited by: ashok saha on Mar 13, 2008 2:20 PM -
How to fill variables when calling a web template as a modal dialog
Hi Experts,
My scenario is as follow:
I have a web template (application) A with an analysis item which has enabled the option for selecting single rows, in the rows I have the characteristic 0EMPLOYEE and a button for executing the commands OPEN_TEMPLATE_DIALOG and SET_TEMPLATE for calling web template B. In web template B I have a report with the variable zp_employee.
The behavior I need is, if the user is selecting a row in the analysis item of template A, variable zp_employee in web application B should be filled from the selection. If there is no selection of a row, the variable screen should shows up.
The general issue here, is how to feed one or more variables that "live" in wad B from a web item (analysis, input item, combo box, etc) in wad A.
I guess it has to do with setting parameters in the URL with which wad B is called, may be coding a java script in web template B in the standard action "Action Before first display", but not sure
thanks for any helpHi:
Try that one in SPRO.
here are steps if u need them.
SPRO
SAP Reference IMG
From here, open tree:
SAP Netweaver
SAP Buss Info Warehouse
Reporting Relevant Settings
BEx Web
Set Standard Web Templates.
Here add for Adhoc analysis and others if needed.
Ram Chamarty
Message was edited by: Ram Chamarthy -
Hi,
when I try to open a Webtemplate via
the Internet Explorer it is not working.
Please assist.
Regards,
AnitaYou can determine the properties of the Web template both in an object tag (see Object Tag for the Properties of Web Templates) and or with command Call Web Template.
CMD
LDOC
Parameter
Description
TEMPLATE_ID
Name of the Web template
Name under which you stored the Web template in the Web Application Designer.
STATELESS (optional)
X = Yes, = No
End the connection to the server as soon as possible
For Web templates that are used almost exclusively for display without further navigation, it is more useful to set the attribute STATELESS. The session on the application server is terminated when the Web template is created. This saves resources on the application server.
If this attribute is not specified, it is assumed that the page is still needed for navigating.
USE_PERSONALIZATION (optional)
X = Yes, = No
Use personalized Web template
If the parameter is set to X, the personalized Web template for the current user is used. If personalization does not exist for the Web template or the parameter is not set, the Web template is executed without personalization.
STYLE_SHEET (optional)
Path for a stylesheet that you want to use to display the Web template.
This overwrites any stylesheet that you may have already assigned.
TRACE (optional)
X = switch on, = do not switch on
Switch on OLAP trace
To analyze problems with SAP, you usually need a trace. You can activate the trace with the help of note 112458 or by using the TRACE parameter.
JAVASCRIPT (optional)
X = switch on, = do not switch on
Use of JavaScript
Using this parameter, you ensure that Web applications are created using JavaScript (extensive interaction options) or suppress the use of JavaScript (restricted interaction).
If this parameter is not transferred, JavaScript is activated automatically in Web browsers of version >=4.0.
SNIPPET_OPERATIONS (optional)
X = switch on, = do not switch on
Reload changed components of the page
You use this parameter to control whether only changed objects are loaded in navigation. This function has higher Web browser requirements. For this reason, this function is only supported by MS Internet Explorer version >=.
If this parameter is not transferred, loading is activated automatically for the suitable Web browsers.
ENABLE_OPEN_WINDOW (optional)
X = switch on, = do not switch on
Open new window
Using this parameter, you can control whether a new browser window is opened, for example, for the properties dialog box or for filtering. If this parameter is not specified, new windows are opened (if supported by the Web browser).
VARIABLE_SCREEN (optional)
X = display variable screen, = do not display, if possible
Display variable screen
If you call up a Web template that has query views containing variables that are ready for input, you can use these parameters to display the variable screen. Is you do not set this parameter, or set it to , the variable screen is hidden, whenever possible. However, it will still be shown if, for example, the required variables that are ready for input have not yet been filled.
MELT_VARIABLES (optional)
X = merge, = display each query individually
Merge variables
If you call up a Web template containing several query views that have variables that are ready for input and you go to the variable screen display, you can determine, through these parameters, whether variables, which are used in all query views and in the same context (same InfoProvider, same compounding), are to be provided for input only once.
VARIABLES_CLEAR (optional)
X = reset variable, = do not reset
Reset default variables
If you call up a Web template that contains one or several query views that have variables that are ready for input, you can specify this parameter to reset the default variables through the query view. The variables then contain the defaults from the variable definition.
SUPPRESS_WARNINGS (optional)
X = do not display warnings, = display warnings
Suppress warnings
With this parameter, warnings are not displayed. With this parameter, warnings are not displayed.
SUPPRESS_SYSTEM_MESSAGES (optional)
'X' = Do not display system messages
' ' = Display system messages
Suppress system messages
With this parameter, system messages are not displayed.
DATA_MODE (optional)
NEW = use current data
STORED = Use precalculated data
HYBRID = use precalculated data, request current data if this is missing.
STATIC = use precalculated HTML pages
STATIC_HYBRID = use precalculated HTML pages, if there are none, search by precalculated data and when there is none, request current data
Data mode
This parameter is optional. If you do not specify one of the options for this parameter, a request is always sent to the OLAP processor and current data is read.
For the modi STORED and HYBRID, data has to be precalculated using the Reporting Agent.
See Defining the Web Templates Setting
The parameters PAGEID and WBID that are used in BW 2.x are supported for the Web templates created under BW 2.x. We recommend, however, that you no longer use these.
Calling up the Web template without navigating
http://yourAppServer:yourPort/SAP/BW/BEx?CMD=LDOC&TEMPLATE_ID=yourTemplate&STATELESS=X
Calling up the Web template with trace switched on
http://yourAppServer:yourPort/SAP/BW/BEx?CMD=LDOC&TEMPLATE_ID=yourTemplate&TRACE=X
Calling up the Web template with reset variables and active variable screen
http://yourAppServer:yourPort/SAP/BW/BEx?CMD=LDOC&TEMPLATE_ID=yourTemplate&VARIABLE_SCREEN=X&VARIABLES_CLEAR=X
Thank
Bhima -
Hi,
How can we set Web template(Z) as a default template in the portal?
Thanks
Sanjeev.Hi Sanjeev,
You can do it in SPRO. Follow this route...go to SPRO-?IMG Activity->SAP NetWeaver->Business Intelligence->Settings for Reporting and Analysis->BEx Web->Execute Set Standard Web Templates. In the next screen enter your Z web template in the "Ad hoc Analysis" field.
Hope this helps...
Maybe you are looking for
-
Problems with display of preview - and Adobe's tech support.
Hello, all. After quite a bit of struggle I am still experiencing problems with the way Bridge CS5 displays previews. Previews are displayed with rather low quality. By that I mean low resolution that causes images to appear pixelated and out of focu
-
Issues After Disabling IPv6 on Your NIC on SBS 2008
If you uncheck the IPv6 protocol from your network interface card on your Windows SBS 2008 server you may see the following issues after a reboot: Microsoft Exchange services fail to start Server hangs at “Applying Computer Settings…” (can eventually
-
Variable substitution using attribute
hi, i want to use an attribute of an elemnet in variable substitution. i know how to use element in variable substitution and i know that i can use message header attributes in variable substitution, but if i create an element with an attribute how d
-
My installation stop with "The ActiveX control for Flash Player could not be registered"
I have tryed olmost any thing from the FAO, and nothings helps! Can You help with any salutions?
-
i recently set up my iphone on a new laptop and have transefered all purchases and managed to syn everything apart from the apps. if i select the apps to sync it removes them from the folders i have set up. is there any wasy of backing it up exaclty