Re: outbound idoc process

Can someone explain me on outbound idoc process.
I am facing problem with an idoc transimission. From sap its getting triggered and showing status 3 ( Sending to port OK  ). But third party is  not able to receive.
I am not much aware of the middile ware trasmission runs during idoc transfer.
Please can anyone tell me possible cause of error?

Outbound Idoc process
sap outbound program->outbound ALE program (this takes data from application repository)>Craete master Idoc (master Idoc is a virtual Idoc)->ALE service laye (which takes data from distribution model)>communication Idoc--->communication layer
The status os Idoc will becaome 03 if its pass from the communication layer and it doesnt have any gaurntee that Idoc has reached at receiver end or not.
To varify that Idoc has reached at receiver end we have two advance method
1- TRFC method
2- Auditing method
In TRFC method a standard program, RBDMOIND, is scheduled or executed online to determine whether the communication was successful.
If the Idoc has successfully reached to the destination then the status changed from 3 to 12 else status remains 3.
hope this information helps u.

Similar Messages

  • Regarding the Outbound IDOC process

    Hi Experts,
    Please answers the following questions which i have some doubts in Outbound Process.
    1)  Which program is resposible to fill the segments of IDOC(Std IDoc) in case of   Outbound IDOC Process with message control , Is it FM in Process code or any other FM based on message type( Std Msg)?.
    2) Where we need to code or search the exit in Case of extension of basic IDOC type with and without message control?
    3)Which prog is responsible to fill the IDOC in case of outbound process without message control but using std basic IDOC.
    Regards,
    Kali Pramod

    Kali,
    1. You can search in SE37 using IDOC_OUTPUT* for finding out corresponding function modules. It is based on message types.
    2. You can search user exit in above mentioned function module. So first get the correct populating FM & then you can search for Call Customer Function inside the code for user exit.
    3.Again ans is same as in point 1.

  • Outbound IDOC process - Using standard  or Custom Program

    Hi all,
    i'm having some doubts regarding IDOC's outbound processing.
    I'm trying to understand 2 scenarios:
    1- Trigger Standard Outbound IDOC without writting any Z program ou IDOC FM.
    It's possible to trigger a outbound idoc for exemple, whenever a sales order is created. To do this is, i suposed i don't need to write any code at all, correct?
    What i need to do is create a logical system (SALE), define Transmission protocol (WE20, in here i associate the partner, and the outbound message type? After this point is the idoc automatic triggered?
    If not, what is the correct procedure?
    2 Trigger Ountbound IDOC using Z program.
    Whats is diferent from the point 1 to this situation?
    Best regards,
    Pedro

    Kali,
    1. You can search in SE37 using IDOC_OUTPUT* for finding out corresponding function modules. It is based on message types.
    2. You can search user exit in above mentioned function module. So first get the correct populating FM & then you can search for Call Customer Function inside the code for user exit.
    3.Again ans is same as in point 1.

  • Scheduling inbound and outbound idoc  processing

    Hi everybody.
    I ´d ike to know which is the best way to schecule the outbound and inbound idoc process.
    Nowadays we are using this:
    INBOUND PROCESSING
    - In WE20 the idocs are checked with "Trigger with a background program".
    - The program RBDAPP01 is scheduled with a job to trigger the process of the inbound idocs.
    OUTBOUND PROCESSING
    - The program RBDMIDOC is scheduled to create the idocs than have been created with change pointers.
    - The program RSEOUT00 is scheduled with a job to trigger the process of the outbound idocs.
    Is there any better option to improve de perfomance????
    Edited by: Christian  Abad Chico on Nov 13, 2009 10:09 AM

    Any answer

  • OutBound IDOC Processing

    Hi Experts,
                         I am getting the following error while sending outbound IDOC (Multiple IDOCS as a single message) to SAP-XI.I am trying to send the IDOC using WE19 transaction and getting the following error.
    500 error during parsing of SOAP Header.Status record 02
    Thanks
    Ajay Garg

    HI,
    500 error during parsing of SOAP Header.Status record 02
    The Idoc Status code 02 indicates as  02---> Error passing data to port
    And the 500 error of parsing of SOAP header is internal server error.
    HTTP 500 can be any problem at XI. Plz chk all the setting on the XI side.
    Check this SAP SOAP Note for FAQ-856597 (Question No 1)
    By default, the SOAP adapter sends the SOAP message with the content type text/xml.
    When you check "Do not use SOAP envelope", the default contnet type is application/xml.
    You can change the content type like this: Go to the SOAP receiver communication channel module tab. Add the module "localejbs/AF_Modules/MessageTransformBean" before the standard module. Add the parameter name Transform.ContentType and value text/xml.
    Check out this
    /people/varadharajan.krishnasamy/blog/2007/01/09/troubleshooting-soap-message--xi
    One way of testing ur scenario
    /people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible
    Can you refer below steps for troubleshooting. it may help you
    Troubleshooting IDOC scenario
    1. Start with checking the status in sm58 of sender R/3
    Follow the steps
    No message in found in XI in IDOC to FILE scenario
    2. Try deleating the IDoc from IDX2 and refiring the same.
    3. Check your RFC destination definition (the one pointing to your XI server) to confirm that it is of type '3' (R/3 system) and not 'T' (TCP/IP).
    In your ID, in the Sender Business System --> Adapter Specific Identifiers, give the logical name for the business System pointing to the R3 system
    4. Monitor the SM58 in R/3 for IDOC status.
    5. Trouble shooting file to IDOC and IDOC to file
    /people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/error%2bhandling%2bin%2bfile-idoc%2bscenario
    Refer below links for indepth troubleshooting
    File to IDOC, trouble shooting
    Thanks
    Swarup
    Edited by: Swarup Sawant on May 26, 2008 11:15 AM

  • Enhancements in Outbound IDoc Processing

    Hi,
    How do I find the function module where the Outbound IDoc structures are filled.
    Basic type: SHP_OBDLV_SAVE_REPLICA02
    Message type: SHP_OBDLV_SAVE_REPLICA
    Thanks,
    Regards,
    Morten

    go to transaction WE57 and search for messagetype/idoc type.

  • OUTBOUND IDOCS PROCESSING ON ALE INTERFACE

    Hi experts...
        I am working on ALE IDOCS
    I have a requirement where i have to convert my outgoing idocs into flat files on my local system
    1) How do i create a file port and specify the location(directory)
    2) How do i assign this file port to the sending system
    3) Where will the idocs be stored ... can i check the location using AL11.
    Can anyone send the procedure for the above ..
    Also can anyone send me documents on "SAP to LEGACY system Interfacing"
    to my mail id      [email protected]
    Thanks and Regards

    Hi Ashok,
    Please check this link.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2a1dd5d3-0801-0010-ed8d-bd797ed922cb
    open it as PDF.
    I think it will answer all your queries....
    Dont forget to award points if you get the answer:-)
    Regards,
    Vinay

  • Outbound idoc process for sales order using message control

    Hi All,
        I am changing sales order using VA02 , while saving sales number IDOC is creating but I am unable to see the data filling into segments. I think idoc is triggaring in background.
      Can you please tell how I can see the data filling in to segments
    Thanks in advance,
    SN

    keep the break point in the program RSNAST00
    at this particular code.
    perform (tnapr-ronam) in program (tnapr-pgnam) using returncode
                                                             us_screen
                                                             if found.
    and also Activate update Debugging , before pressing the save button in VA02.

  • Degugging Inbound and Outbound idocs

    Hi friends,
    Can any one help me in debugging Inbound and outbound IDocs?
    1.I found the inbound FM using Tcode we19,clicked the inbound FM button and called it in the debugging mode.
      While debugging the Inbound FM iam nt able to figure out the actual problem.Is there any way to reach out the exact problem?
    2.How to find out the outbound Idoc FM and debug it?
    Your help is appreciated.
    Thanks in Advance.

    Hi,
    Inbound or Outbound IDoc processing FM can be found iin partner profiles(WE20).
    for Outbound: WE20 --> choose partner type --> Outbound parameters --> choose message type --> Message control Tab --> Double click on Process code to get the FM assigned.
    for inbound: WE20 --> choose partner type --> Inbound parameters --> choose message type --> inbound options --> Double click on Process code to get the FM assigned.
    For debugging, use Tcode WE15 for outbound, But before that u need to set the output type dispatch time as 1 (Send with periodically scheduled Job). Go to Output type assignment screen --> assign the output type --> choose further processing --> Set Dispatch time as 1 --> Save.
    Note: U need to keep the break point in the Outbound FM or exit if any before going to WE15 to debug from that point.
    Hope it helps,
    SG.

  • Data transfer between SAP & Java and Vice versa using IDOC Process

    Dear Experts,
            We are working on one of the good requirement related to data transfer between SAP and Java software. Client requirement is, they want to transfer the data in both the ways (from SAP --> Java and Vice versa also).
    In detail is, after sales order creation using one custom program loading plan details will be calculated. Once loading dates are confirmed then, user will release the sales document to transfer the data from SAP to Java using "Outbound IDOC processing". Similarly in that JAVA software some shipment details will be performed, once completed from JAVA software again details needs to be pumped back to SAP as "Inbound IDOC Processing".
    For this fields are already identified from external software SAP and we are looking for the same to perform the steps in SAP.
    At this stage, I need your expert opinion  / feedback how to go  about at this stage.
    Meaning,  
                     1. What are the customizing steps needs to be done in SAP..?
                     2. How to trigger the :Outbound IDOC process" once the documents are "Released" from custom transaction
                     3. How to create the link between SAP and JAVA to transfer the data between these 2 software
                     4. How to trigger the "Inbound IDOC Process" from JAVA software to SAP and how to store the data in SAP
    Experts, please give your feedback in terms of reply or by sending the step by step process to fulfill this client requirement.
    Thanks for your cooperation.
    Regards,
    Ramesh

    Maybe too many open questions in the same document.
    Maybe you should repost a more specific question in a technical forum.
    This looks like a small project where you already know what you want, maybe you should contract a technical specialist so he proceeds to the implementation!

  • Process Code in outbound IDOC

    Hi,
    We have created a process code for outbound IDOC and assigned an FM to it.In that FM, code is written to generate an IDOC(FM 'master_idoc_distribute').Please let us know how to trigger the outbound IDOC using the process code.Are there any FM or standard programs??
    Regards
    Prathima

    Hi Prathima,
    For outbond Idoc you have to define the output parameters for the corresponding Partner profile (transaction WE20). Look there that there is a tab called Messages control to specify and aplication, a message class and a process code. Is here where you have to add the process code.
    The application/message is responsible of select the data adapted for the FM linked to the process code.
    Reward points if helps.
    Roger

  • Real processing timestamp of tRFC in outbound IDOCs

    We post outbound IDOCs directly via tRFC. Due to heavy load, processing is extremely asynchronous. The timestamp when the tRFC is realeased is loggend in the IDOC status record, but I want to know when it is really processed for trouble shooting reasons. Is there any way to find that out?
    Thanks, Manfred

    Hi Manfred,
    This is indeed a pain.  In my experience, you will not be able to get a status record entered at the actual time of sending.
    A workaround I have used in the past is report RBDMOIND which will update the IDOC status from 03 to 12 if the corresponding tRFC packet has been processed (ie. is not there anymore).
    Whilst it's better than nothing, it still won't give the true picture because the date/time of the status 12 record is the date/time of the RBDMOIND run.
    The other alternative, which takes a bit more effort, is to have the receiver (such as Business Connector or XI), send back an audit IDOC (ALEAUD01) when the IDOC has been processed.  This allows you to update the IDOC status.
    Cheers,
    Scott

  • Process code for Outbound IDOC type MBGMCR03

    Hi Friends,
    I have a requirement,  where in Goods receipt IDOC data from ECC 6.0 needs to be sent to the external system through XI, for that require a process code. Can you all suggest the process code for the outbound IDOC for Goods Receipt.
    Thanks in Advance,
    Meghna.

    Hi,
    Goods Movement is genarally inbound.
    You may have to write your own process code for MBGMCR03.
    Regards,
    Shakthi.

  • Automated error email notification when outbound IDOC fails

    Hi,
    The requirement is that whenever the outbound IDOC of message type PAYEXT, basic type PEXR2002, fails, then email has to be trigerred to a group id.
    I had suggested to write a report program that runs as a job. If the IDOC goes to error status then mail will be sent from this report. Client prefers it to be done through workflow.
    There is a standard process code for outbound IDOC failure handling EDIO (we40). standard task 7989 has been assigned to this process code. I dont want to modify this standard task as I am not sure of impact.
    Terminating event for this task is 'ERRORPROCESSCOMPLETD'.
    I have developed the workflow that has trigerring event 'ERRORPROCESSCOMPLETD' and bound with the IDOC number. This will send mail to the group id with the IDOC details
    Now issue is that, I am not sure if standard process EDIO will be trigerred automatically, or should we configure anywhere. Since this is standard outbound IDOC, I am not able to add the process code in partner profile.
    Please give your inputs or any other alternate solution to send mail through workflow when  outbound IDOC fails.
    Thanks in advance.

    Hi,
    I guess in your outbound partner profile for PAYEXT. you need to add process code  EDIO in message control TAb. WHich will cause to trigger the workflow which will send the notification.

  • Message type for Scheduling Agreement - Outbound IDoc

    Hi All,
    I have to create an Idoc for Scheduling Agreement through a Z program based on some conditions. I have bit confusion, whether i can use Idoc type for Orders(e.g ORDERS01..05) & Message type ORDERS / ORDCHG to generate Outbound Idoc.
    Already there is process code for for ORDCHG mappig IDOC_OUTPUT_ORDCHG & ORDERS mappig IDOC_OUTPUT_ORDERS.  Whether there will be any impact on this.
    Appreciate your help.
    Regards,
    Anbalagan.

    Hi Anji,
    Thanks for the Reply. But i think ORDRSP is for Order Confirmations.
    But I have to send Outbound Idoc for a Schedule Agreement.
    Whether the same  Idoc type & Messge type used for SO/PO(e.g ORDERS05, ORDERS/ORDCHG) can be used for Scheduling Agreement.
    Please Advice.
    Regards,
    Anbalagan

Maybe you are looking for

  • Photoshop Web Gallery shtml output?

    Hello, I would like to make a portfolio web site with my works. I've already implemented the design code in the Photoshop Wen Gallery, but the only problem I have is that everytime I want to change my menu, I have to refresh the code and all the gall

  • Iphone 6 - how do I tag a location in Facebook?

    Hi, I just got an iPhone 6 over the weekend and I can't figure out how to tag a location to my photo uploads in Facebook. When I try to tag a location it gives me a map of where I am currently located and will only give me the option to tag a local b

  • Nokia E71x Copy and Paste Wireless Key

    I have my long and obscure WEP encryption key for my wireless network in a text document on my phone. I can open the document and copy the key, but it won't let me paste it into the "Pre-Shared Key" input box. Can the OS copy and paste between differ

  • Progress Indicator Window?

    A co-worker asked me if Cp had any kind of debugging window.  I hadn't ever seen or heard of that, so I was poking around and found the Progress Indicator window.  It doesn't run any kind of trace or debug, but does have a message about 'ongoing medi

  • Enhanced podcasts not working in iOS 5; new music app keeps crashing

    I just updated to iOS5 and regularly view enhanced podcasts.  after the update, I can no longer figure out how to view the enhanced version anymore.  I get the sound, but the image does not change.  Can anybody please help? on top of this the new mus