Re: Overiding of QM for one of two plants

Hi All,
I have a requirement where I do procure a material from two plants. QM is active. My requirement is that for one of the two plant the stock should directly go to unrestricted location while for the other vendor it should go to quality stock.
Please advice.
Regards,
Vivek

Hi Vivek,
I have 2 queries here.
1.     Have you created Italy as vendor code in your system through XK01?
2.     With which movement type you are receiving material in China plant from Italy vendor?
If the answers to above questions are yes and 101 respectively, your requirement can be fulfilled in standard ways.
1.     You need to activate inspection type 01 in material master in china plant.
2.     Also you need to have procurement tick activated in material master.
3.     Create Q-Info records for this material with above 2 vendors.
4.     For creating Q-Info record for Italy vendor select u201CNo Inspectionu201D in u201CInsp controlu201D
5.     As a result of which inspection lot will not be generated for vendor Italy ensuring no inspection.
6.     At the same time inspection remains active for all other vendors.
Just check this out!
Regards,
Anand Rao

Similar Messages

When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box

When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.

When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.

HT201177 My mac os frequently freezes for one to two minutes at a time. I have uninstalled and reinstalled flashplayer 11.3 several times because I sometimes get a crash report on flashplayer. I would like other suggestions as to what I can do.and re

My mac os frequently freezes for one to two minutes at a time. I have uninstalled and reinstalled flashplayer 11.3 several times because I sometimes get a crash report on flashplayer. I would like other suggestions as to what more I can do.

The next time you have the problem, note the exact times when it starts and ends: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Scroll back in the log to the time you noted above. Post any messages timestamped during that interval – the text, please, not a screenshot.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Forbidding all websites except for one or two?

Is there a way to forbid all websites expect for one or two sites? We are looking into getting a couple ipads for our business but need the employes not to use them for personal use. Please help!!

General -> Restrictions -> Websites
In that section select "Specific websites only" and you can enter in the sites you want your users to be able to access. Note that to the best of my knowledge it applies only to the built-in web browser, Safari, so you'll need to also turn off the ability to install apps or your users can just download some other browser.
Regards.

Problem in material extension- material is blocked for one or more plant

Hi,
I am extending material from one plant to another plant but when i reach in accounting 1 deta system shows error material is blocked for one or more plant.
Message no. M3562
Diagnosis
You wanted to make a change in the material master record which requires that the master record is blocked in all plants.
A change of this kind includes, for example, the entry of a valuation type that allows single batch valuation, or changing of the batch management requirement if the batches have a cross-plant definition in your system.
System Response
The change required cannot be made until the material can be blocked by the current transaction in all plants
How to solve it. Please guide me..

Hi Nitesh,
From the error desc it appears you are making a change that has an impact on more than one plant. probably while extending you are trying to change a value for the new plant where the extension is being made.
make sure if this change is needed, its blocked in the plants for the field which has a diff value. you might have to modify the value of the field causing diff across the other plants also to make it uniform.
regards
sadhu kishore

Different ship to party for one of two line items from sales order

Hi Experts,
1. The Sales Order No.19701 is an Export Order, received from M/s. Industries & Construction, Indonesia. We have to supply all the materials on FOB Indian seaport basis.
2. However, we have to dispatch against Line Item No. 280 & 290 to one of our subvendors, M/s.Industries, sec,rabad to complete some Control Assly. as per agreed Inspection terms.
3. After completion of Control Assembly & Client's Inspection materials will be finally dispatched to nearest Seaport for seafreight.
So here i can i map this scenario from sales order to billing, ship to party for those 2 items must be sub vendor.
Thanx in advance
Madhu

Hi madhusudan
You can map different ship to party . First you need to configure customer master for the same.
Add the alternate ship to parties to customer master of sold to party, your export customer.
While creating master data for sub vendors as ship to party ,you need to maintian proper customer pricing pricing procedure and tax classification as you mentioned customer is export customer ,but ship to party seems to be domestic ,so carefully check the same. also check the shipping condition if it is separate for exports.
Then in Sales order transaction on line item data ,change your ship to party for the line item as per the the requirement.
for further processing of this scenario ,like excise invoice and ARE1 u might have lsome issues if ship to party is liable for duties and taxes and Sold to is exempt and you are drawing only one invoice for these 2 separate deliveries. pl check on the same.
I hope this helps
Revert for any queries
Regards
Mandar
Edited by: Mandar Deshpande on Apr 13, 2010 11:04 PM

Can we maintain two values for one material a plant without split valuation

Hello Guru's,
We have a situation, we use MOVING AVERAGE PRICE in accounting view 1. Without split valuation.
The actual issue is, we receive, damaged material from a customer with a "0" value, and we send the material as it is, to a vendor with a "0" value.
The vendor, sends us back the repaired material with a value, say "10" (and this keeps changing).
Is it possible, to have Non Valuated Stock and Valuated Stock within the same Plant, for Material "A".
And it shouldn't affect the MAP. Also, we don't want to have Split Valuation.
Please help.
Kashi

if i am getting your scenrio correctly then i will suggets u to maintian the material master with moving avreage price control indicator then
case1> gr from customer at o rs
use the tcode mb1c and movement type 511
as it is evaluated at MAP hence only material document genrated no accounting document
well tried to realize your scenerio but it is not possible to do that
as MAP is going to get effected as a result of valuated good recipet
u need to go for separate material code then transfer good from non valuated to valuated one using tcode mb1b and movement type 309 or use split valuation

IPhoto: No pictures only broken-line/square boxes where pictures should be. Scanning with the bar slide the pics appear for one or two seconds then are gone.

Grandson Son sabataged my IPhotos! Can't get pics to appear. Only broken-line/square boxes where the pictures should be. Scrolling with side bar brings up pics for 1 or 2 seconds then they are gone again. HELP! Please....
Raefisch

Restore from your back up is the most obvious way forward.
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to rebuild the thumbnails. It can take 3 or 4 goes for this to work

How can I keep the history of my dialed and received calls for one or two weeks on my iPhone 5?

How can I keep my history for my dialed and received calls on my iPhone 5?

The only thing is, I have read where it will only keep 100 entries at tops. I'm not sure as I have never let it get that high, however many business users have reported this.
OP, how much history are you talking about keeping? Also, there is no method to archive this in any fashion to be looked at or searched at a later date.

There are two transactions ZJPVCS303 and ZJPVCS303_US for one single Report

When run as a batch program, (currently this is the case), or withT-Code ZJPVCS303 the selection screen is unchanged (except for additional sales area above)
- When run as T-Code ZJPVCS303_UL (UL stands for Upload) the selection screen is changed. The unix file option is no longer available, and the user is able to upload a local file (in the same format as the current unix file, but tab delimited) to the program for processing.
Requirements:
There are two transactions ZJPVCS303 and ZJPVCS303_US for one single Report.
->When ZJPVCS303 Transaction is executed, the file is uploaded from the Application
server to SAP R/3. The selection screen parameters would be:
Logical Filename:
Sales Organization:
Distribution Channel:
Division:
->When ZJPVCS303_US Transaction is executed, the file is uploaded from the Presentation Server
to SAP R/3. When this transaction is executed, it should not have the 'Logical
Filename' parameter anymore on the selection-screen. Instead it should only have
Local File name on the presentation server:
Sales Organization:
Distribution Channel:
Division:
    The same thing is applicable for the other transaction ZJPVCS303. When transaction ZJPVCS303
is executed, it should not have the 'Local Filename' parameter anymore on the selection-screen. Instead it should only have
Logical Filename:
Sales Organization:
Distribution Channel:
Division:
So how should I make these parameters invisible depending on the transaction codes execution.
I have an idea of using MODIF ID, LOOPING AT SCREEN...MODIFY SCREEN.
I have an idea of using SY-TCODE.
EX:
AT SELECTION-SCREEN OUTPUT.
IF SY-TCODE = 'ZJPVCS303'.
LOOP AT SCREEN.
IF SCREEN-GROUPID = 'GRP'.
   SCREEN-INPUT   = 0.
   SCREEN-INVISIBLE = 1.
   MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSEIF SY-TCODE = 'ZJPVCS303_US'.
LOOP AT SCREEN.
IF .....
ENDLOOP.
ENDIF.
ENDIF.
But I am not able to get the output which I require. Please help me out.

Hello Rani
Basically the transaction determines whether upload starts from application server (AS) or presentation server (PC). Thus, you will have the following parameter:
PARAMETERS:
p_as_fil          TYPE filename   MODIF ID unx, " e.g. Unix server
p_pc_fil          TYPE filename   MODIF ID wnd. " e.g. Windows PC
AT SELECTION-SCREEN OUTPUT.
CASE syst-tcode.
*   transaction(s) for upload from server (AS)
    WHEN 'ZJPVCS303.
      LOOP AT screen.
        IF ( screen-group1 = 'UNX' ).
          screen-input = 0.
          screen-invisible = 1.
          MODIFY screen.
        ENDIF.
      ENDLOOP.
*   transaction(s) for upload from local PC (PC)
    WHEN 'ZJPVCS303_US.
      LOOP AT screen.
        IF ( screen-group1 = 'WND' ).
          screen-input = 0.
          screen-invisible = 1.
          MODIFY screen.
        ENDIF.
      ENDLOOP.
   WHEN others.
   ENDCASE.
Regards
Uwe

BEx report -two different calculations for a result for one key figure how?

All,
Maybe someone could help me with the following, we have a requirement to setup for one key figure two calculations for result rows. One result (average) for one level, and on a higher level -grand total have a (sum), as for our business it makes sense to do it this way. We have setup average for this KF, we get correct results (see below values 7,5 & 6,5) however for the grand total (across multiple products) so for one level up we need to have a different calculation. How could we achieve this?
Here is an example:
location     product          inventory
AAAA     11111          5
AAAA     11111          5
AAAA     11111          10
AAAA     11111          10
AAAA     Result          7,5      ---> average
AAAA     22222          5
AAAA     22222          6
AAAA     22222          7
AAAA     22222          8
AAAA     Result          6,5       -
> average
AAAA     Result (across products)          14      ---> here I want to have a sum of averages

This could be achieve only IF you upload a hierarchy for product inventory with different levels, wherein each level show subtotals and finally grand total will be shown at the end of the results.

I have two users with different music on each itunes and i can only use one library, how do i use both for one iTouch?

i have two users with different music on each itunes and i can only use one library, how do i use both for one iTouch?

Chris, I believe this link may have the information you're looking for. Welcome to discussions!
http://docs.info.apple.com/article.html?artnum=300432

Two apple ID on one iphone. I need to purchase extra storage for one but it doesn't give me a place to do it.

im really frustrated. everything not just this happening to me right now. I'll try to be as clear as I can be here. I can't get email or send email with one of two apple I.D.'s connected to my iphone. The other I.D. I paid for extra storage. The I.D. that needs more storage is my main email address and my lifeline. Job offers come to that address, my banking and home security alerts, etc all happen through this one email account. I can't even get that ID to show on my phone to choose it.
How can I change things to show me both ID's so I can add storage to the correct one?

Try here > How to See a Purchase History for iTunes on an iPhone | eHow
Update or edit payment method > iTunes Store: Changing account information

Two users share one Apple ID, on two phones. can they be separated without losing phone backups? IE creating a new ID for one of the users?

my in-laws share one apple id for two separate iPhones. They would like to create a new ID for one of the users but maintain his current backup. can this be done?

If you want to create a new account make sure you sign out of everything via the settings. (ICloud, iTunes, facetime, messages, etc) APPS: since the apps were downloaded with a different apple ID, you will always need to use the password for the apple ID that downloaded that particular APP when it needs to be updated. Unless it is free, you can simply delete it and download it under the new apple ID. As for the music, you can keep it on the IOS device, but if it's accidentally deleted, you'd have to sign back into the original account and download from the cloud. (But, you risk getting the 90 day lockout. )

Can you have two iCloud accounts for one Apple id?

Can you have two iCloud accounts for one Apple id?

the appleID is you in the ios world if you have an iphone and an ipad and an Ipod touch and an appletv and a mac then you should use 1 appleID on all of them it does not mean the same data is on all of them unless you want it to be

Re: Overiding of QM for one of two plants

Similar Messages

Maybe you are looking for