Re: Overriding default errror page for Apache-Weblogic

I am writing this problem again as nobody has replied me with any solution.
I want to overide the default error page that comes up when weblogic is down
for some reason in apache-weblogic bridge. I looked into the weblogic
documentation and specfied the following in the apache configuration file
ErrorPage http://www.domain.com/systemerror.html
But for some reason it is not able to locate the domain as well as the page.
But if try the same url in the browser, it works. Please help.
Rakesh

I am using the plugin and using the error page successfully. Apache and WL
use the same document root, and the error page is located within the
document root:
Within the httpd.conf, I have:
<IfModule mod_weblogic.c>
# Config file for WebLogic which defines parameters for plugin
Include conf/weblogic.conf
</IfModule>
Within the weblogic.conf, I have:
ErrorPage unavailable.html
Provide your configuration settings.
"Rakesh Gupta" <[email protected]> wrote in message
news:39d3bcd3$[email protected]..
Well, we are using weblogic supplied apache plugin and I am following all
the steps that is specified in setting up apache plugins in weblogic
documentation. I do not think it is apache network problem as apache is
working fine.
The think the problem is somewhere in the weblogic-apache plugin module.
"Jesse E Tilly" <[email protected]> wrote in message
news:[email protected]..
[email protected] (Rakesh Gupta) wrote in <[email protected]>:
I am writing this problem again as nobody has replied me with any
solution.
I want to overide the default error page that comes up when weblogic is
down for some reason in apache-weblogic bridge. I looked into the
weblogic documentation and specfied the following in the apache
configuration file
ErrorPage http://www.domain.com/systemerror.html
But for some reason it is not able to locate the domain as well as the
page. But if try the same url in the browser, it works. Please help.
Rakesh
as worded, that sounds like a network setup problem on the apache server
side.
however, it seems that you want a server-connection-timeout error toreturn
an specific error page via the plug-in. This all depends on how theplugin
works. If it is how I think it works, there needs to be an INI
setting
to sepcify a page. Why? Because the plug-in effectively has control of
the response. It either needs a way hand control back to the web serveror
needs to have error pages of its own.
BEA?
Jesse

Similar Messages

  • Overriding default errror page for Apache-Weblogic bridge

    I am writing this problem again as nobody has replied me with any solution.
    I want to overide the default error page that comes up when weblogic is down
    for some reason in apache-weblogic bridge. I looked into the weblogic
    documentation and specfied the following in the apache configuration file
    ErrorPage http://www.domain.com/systemerror.html
    But for some reason it is not able to locate the domain as well as the page.
    But if try the same url in the browser, it works. Please help.
    Rakesh

    I am using the plugin and using the error page successfully. Apache and WL
    use the same document root, and the error page is located within the
    document root:
    Within the httpd.conf, I have:
    <IfModule mod_weblogic.c>
    # Config file for WebLogic which defines parameters for plugin
    Include conf/weblogic.conf
    </IfModule>
    Within the weblogic.conf, I have:
    ErrorPage unavailable.html
    Provide your configuration settings.
    "Rakesh Gupta" <[email protected]> wrote in message
    news:39d3bcd3$[email protected]..
    Well, we are using weblogic supplied apache plugin and I am following all
    the steps that is specified in setting up apache plugins in weblogic
    documentation. I do not think it is apache network problem as apache is
    working fine.
    The think the problem is somewhere in the weblogic-apache plugin module.
    "Jesse E Tilly" <[email protected]> wrote in message
    news:[email protected]..
    [email protected] (Rakesh Gupta) wrote in <[email protected]>:
    I am writing this problem again as nobody has replied me with any
    solution.
    I want to overide the default error page that comes up when weblogic is
    down for some reason in apache-weblogic bridge. I looked into the
    weblogic documentation and specfied the following in the apache
    configuration file
    ErrorPage http://www.domain.com/systemerror.html
    But for some reason it is not able to locate the domain as well as the
    page. But if try the same url in the browser, it works. Please help.
    Rakesh
    as worded, that sounds like a network setup problem on the apache server
    side.
    however, it seems that you want a server-connection-timeout error toreturn
    an specific error page via the plug-in. This all depends on how theplugin
    works. If it is how I think it works, there needs to be an INI
    setting
    to sepcify a page. Why? Because the plug-in effectively has control of
    the response. It either needs a way hand control back to the web serveror
    needs to have error pages of its own.
    BEA?
    Jesse

  • How do I set the default welcome page for PUBLIC user

    gurus,
    i'm using -
    Oracle 9i Database
    Oracle 9ias Portal Release 2
    QUESTION => how do I set the default welcome page for the PUBLIC user.
    i did the following to achieve this -
    1. logged into portal
    2. clicked on builder
    3. clicked on administer tab
    4. selected PUBLIC user in the Portal User Profile portlet
    5. went to the preferences tab
    6. in the default home page selected a custom page group
    7. logged out of portal
    8. open a new browsere session
    9. type the portal URL and i get the login page ....??
    i'm unable to understand this behavior ... shouldn't i be getting the page group that i set for the PUBLIC user in step 6 above ....
    the second QUESTION is => when the user logs out he/she should see the PUBLIC page set in step 6 above ... but, instead the user sees a page that is as follows -
    Partner Application Name Logout Status [Logout Status]
    Oracle Portal (portal) logout status
    The SSO Server (orasso) checkmark
    buzz.resva.trw.com:7778 checkmark
    infrastructure.happy.resva.trw.com checkmark
    portal1.buzz.resva.trw.com checkmark
    portal2.sylvester.resva.trw.com checkmark
    sylvester.resva.trw.com:7778 checkmark
    so, how can i set the default page for the PUBLIC user and also a page when he user logs out.
    ideas anyone ....?
    thanx a bunch.
    hero

    Hi,
    The sequence of operation you are doing to set the home page for public users is correct. You are getting the login screen as the "custom page group" selected as "home page" has not been granted to public.
    Also, while logging-out, it is normal behaviour to get the screen where it shows the list of partner applications from where user has been logged-out. When you click on "Return" button, you will get to the "home page" set above.
    Hope it clarifies the things.
    Regards,
    Ved

  • How can I set the default home page for all new users in Firefox 4

    I'm trying to deploy FF 4.0rc1 in a corporate environment but I can't find a way to set the default home page or any other settings for that matter.
    Is there a way to set the default home page for all new users and lock it so that the users can't change home page?
    Best regards
    Jonas

    In Firefox 4 the template folder for new profiles (C:\Program Files\Mozilla Firefox\defaults\profile\
    ) doesn't exist. You can create that \defaults\profile\ folder and place a file user.js in it with the prefs that you want to initialize.
    See:
    *http://www-archive.mozilla.org/catalog/end-user/customizing/briefprefs.html
    You can also use a mozilla.cfg file to set the default value for prefs.<br />
    See: http://kb.mozillazine.org/Locking_preferences
    defaultPref(); // set new default value
    pref(); // set pref, but allow changes
    lockPref(); // lock pref, disallow changes

  • I can set my default home page (when Firefox starts) but if I open subsequent tabs I get a blank page. How do I set my default home page for all tabs.

    I set my default home page to AltaVista.com. This page comes up as expected when I start Firefox. However if I open a new tab I get a blank page. How to I setup Firefox to use my default web page for all subsequent tabs. This was an easy process in IE

    Sounds like you want the New Tab Homage extension.
    https://addons.mozilla.org/en-US/firefox/addon/777/
    For more info about extensions, see [[Using extensions with Firefox]]

  • Final cut server-Test Page for Apache installation comes up when IP put in

    I have installed Final Cut Server on our Mac Pro Running OSX Leopard. Installation succeeded, but when I type in the IP address of the server in safari, the "Test Page for Apache Installation" comes up. This happens on every computer on the network. I need the client installation window to come in order to install the client. What am I missing, what settings need to be changed?
    Would greatly appreciate some help.
    Thanks

    So when you type in the URL your using this format http://hostname/FinalCutServer, where hostname is the IP address or name of the computer on which you installed Final Cut Server? Especially the "FinalCutServer" part.
    o| TonyTony |o

  • How do you set a default home page for tabs

    Default home page setting is easy enough but when clicking the "+" to open a tab I want to set the page that it defauts to. You would think that it would do the default home page but it doesn't and I cant find where to set it.

    Troubleshooting tips on the '''browser.newtab.url''' preference:
    ''If Firefox won't let you edit this setting:'' you may have something called SearchProtect on your system. This needs to be removed from the Windows Control Panel.
    ''If Firefox lets you save your change but ignores it:'' one of your extensions may be overriding it. You can review, disable, and/or remove extensions on the add-ons page. Either:
    * Ctrl+Shift+a
    * "3-bar" menu button (or Tools menu) > Add-ons
    In the left column, click Extensions. Then cast a critical eye over the list on the right and disable (or remove) anything unknown.
    ''If the change works during your session, but at the next startup is back to the unwanted page:'' you might have a user.js file in your personal Firefox settings folder (your Firefox profile folder). This article describes how to track down and remove the file: [[How to fix preferences that won't save]]. Also beware of features in utility programs like Advanced SystemCare that roll back settings changes between sessions.
    If bad add-ons do not have a Remove button or keep coming back, here's my suggested procedure for tracking down and cleaning them up. I know this seems long, but it's not that bad.
    (1) Open the Windows '''Control Panel''', Uninstall a Program. After the list loads, click the "Installed on" column heading to group the infections, I mean, additions, by date. This can help in smoking out undisclosed bundle items that snuck in with some software you agreed to install. Take out as much trash as possible here.
    (2) Open Firefox's '''Add-ons page''' using either:
    * Ctrl+Shift+a
    * "3-bar" menu button (or Tools menu) > Add-ons
    * in the Windows "Run" dialog, type or paste <br><code>firefox.exe "about:addons"</code>
    In the left column, click '''Plugins'''. Set nonessential and unrecognized plugins to "Never Activate".
    In the left column, click '''Extensions'''. Then, if in doubt, disable (or Remove, if possible) unrecognized and unwanted extensions.
    Often a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
    Any improvement?
    (3) You can search for remaining issues with the '''scanning/cleaning tools''' listed in our support article: [[Troubleshoot Firefox issues caused by malware]]. These on-demand scanners are free and take considerable time to run. If they finish quickly and especially if they require payment, you may have a serious infection. I suggest the specialized forums listed in the article in that case.
    Success?

  • Can't reassign default home page for site connection

    I am connecting to a site where index.php is the default home page.  For some reason, it keeps pointing to index.html and of course comes up "page not found".  I have edited the connection so that ONLY index.php is in the default page list (under index files tab), and it still looks for index.html.
    I have deleted the entire connection, restarted contribute, navigated to the home page successfully during set up, only to have it look for index.html again.  I have also manually typed in the full url and index.php in another set up attempt.  I logged onto the server and deleted the entire folder that Contribute set up, thinking it was holding on to some information in the files there.  I restarted contribute, created a new connection to the site, and it STILL is looking for index.html.  It should be loading http://www.gotohudson.net but instead it's trying to load http://www.gotohudson.net/index.html.
    HELP me get rid of that reference.....
    thank you,
    Marita

    You can set the Home Page each roles also. Follow the below mentioned steps to set the homepage for your site.
    Steps:
    1) Administer the website.
    2) Select the role, to whom you want to set the homepage.
    3) Click on Edit Role Setting.
    4) In the General category, Choose the Home page for users in this role.
    5) Click OK to save and exit.
    Hope this solves your problem.

  • How do I create custom HTTP Error Pages for a Weblogic Server

    I need to be able to display custom HTTP error pages such as a 404 from my Weblogic
    Server when my web application is not deployed.
    Is this possible?
    I have seen some suggestions about putting something like:
    <error-page>
    <error-code>404</error-code>
    <location>Error404.jsp</location>
    </error-page>
    in the web.xml for my web application but I can't see how that would work since
    the web application would not be deployed. I need to set these messages at the
    server level.
    Any help would be appreciated!
    thanks

    Your CategoryAxis id="ha_ccm" uses categoryField="period", and this is the label for the your series (i.e. "Quarter 4/2010"). You cannot have multiple categoryFields for the CategoryAxis; it can only use one data field for the labels. You can use data tips and/or label functions to show the individual series' values on the columns.
    Also:
    Your labelField in the ColumnSeries are set to a ColumnSet name instead of a field name in your dataprovider.
    Font must be embedded if you set ColumnChart.showLabelVertically="true".

  • Default dashboard page for each user group

    How can I set for each user group (or for each user) which dashboard will be opened as the deefault after login?
    Can I also set the default page in that dashboard?

    Hi,
    Under Settings->My account->Preferences->User can select his default dashboard.Is it ok?
    If you dont want them to select that option,you need to redirect them...You can use that blog....
    Create a table in db with two columns-User, Portalpath
    In initialization blog give query to fetch Portalpath from db based on user login... Follow steps from blog...
    Check this blog....http://bintelligencegroup.wordpress.com/2010/09/23/external-table-authentication/
    Clear explanation for external table authentication....in the same way you cna do but take two columns user,portalpath and follow the steps in blog.
    Regards,
    Srikanth
    Edited by: Srikanth Mandadi on Oct 7, 2010 1:44 AM

  • Workgroup Manager - Set default home page for Safari

    Hello
    is it possible to set a default homepage for the a suite of macs using Workgroup manager, for some reason the mac suite are not picking up the homepage set via the proxy, so if it could be changed it would be a great help.
    thanks

    Then just add it yourself. Do this:
    Select any other value available in the com.apple.Safari manifest and then edit the raw xml. This can be done by doing the normal process described above but choosing something other than Home Page. I choose Download location. Then, click back on Accounts and go to the Inspector tab. If you do not have it enable, go WGM's preferences and enable the "show all records tab."
    Once that is visible, select the account that you modified and then click the Inspector tab. From the list, find MCXSettings and turn the reveal arrow down. Select the MCX entry and press the edit pencil. You will see something like this:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>mcxapplicationdata</key>
    <dict>
    <key>com.apple.Safari</key>
    <dict>
    <key>Forced</key>
    <array>
    <dict>
    <key>mcxpreferencesettings</key>
    <dict>
    <key>DownloadsPath</key>
    <string>~/NEW_Download/</string>
    </dict>
    </dict>
    </array>
    <key>mcx_targets</key>
    <array>
    <string>user-managed</string>
    </array>
    </dict>
    </dict>
    </dict>
    </plist>
    Simply hand enter the value you want so it looks like this:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>mcxapplicationdata</key>
    <dict>
    <key>com.apple.Safari</key>
    <dict>
    <key>Forced</key>
    <array>
    <dict>
    <key>mcxpreferencesettings</key>
    <dict>
    <key>DownloadsPath</key>
    <string>~/HERE/</string>
    <key>HomePage</key>
    <string>http://www.happy.com/</string>
    </dict>
    </dict>
    </array>
    <key>mcx_targets</key>
    <array>
    <string>user-managed</string>
    </array>
    </dict>
    </dict>
    </dict>
    </plist>
    THen optionally, remove the DownloadPath key and value.
    That should do it for you.

  • Default "First" Page for each Folder

    Following on from Rick's note if I may...
    Similar question: My file contains numerous folders, the
    inital one of each has a page with a "departmental - overview".
    What I have for each Folder - eg. Finance - is a page
    containing this "overview" - like a "title" page, below this are
    the sub-folders for each aspect of that Dept. eg Job Descriptions,
    Processes ....
    So - when you create the TOC, is there a way that you can get
    the "overview" listed first, and under that, the sub-folders,
    rather than this overview being detailed below the folders....
    Does this make sense???
    Al

    By folder, it sounds like you mean Book in the TOC. Right
    click the book and link it to any topic.
    If you also created a printed output, by default you will get
    the topic twice, once with the book and once in its own right.

  • Setting default home page for managed computers

    We are currently running Mac OS X Leopard Server, which manages 22 other machines in a school environment.
    We also have a wiki/blog/webmail page setup at the address artroom.local and we want this to be the homepage on every managed machine in the room.
    How do we do this - we have looked everywhere in Server Admin and Workgroup Manager to find this, as well as trying to change the homepage on the root account of each individual machine to no avail.
    Any help would be greatly appreciated!

    Could you tell me the command to distribute it to all our managed computers from terminal?
    Once I know that, we can finally get back on track setting up the rest of our managed machines

  • Supplying default error page for server errors?

    In my jsp web application, can you specify an error page that the application will go to when encountering unforseen errors (uncaught exceptions, server errors (the DB being down))? All help greatly apprecieated.
    dosteov

    See this thread:
    http://forum.java.sun.com/thread.jsp?forum=45&thread=332605

  • Override Default Page Activation Workflow

    Hello,
    I am trying to override the default handling of Authors requesting page activations.  By default, an Author that doesn’t have Replication privileges has the request sent to the Admin group.  We’ve created several workflows specifically for different groups since each has their own approval flow:
    CQ User Group                 CQ Workflow
    Consumer >>                     Consumer Approval Workflow
    eCRM >>                             Consumer Approval Workflow
    Business >>                        Business Approval Workflow
    I realize the Author could select the workflow from the Sidekick, but I need ot ensure the correct workflow is assigned if they simply click “Activate” from the Sidekick or the Site Admin (Websites) page.  What’s the best way to accomplish this – writing some sort of servlet, using the Dynamic Participant Step, something else?  The logic would be fairly straight forward – on activation request, check user group and assign page to pre-defined workflow and initiate.

    You can set this in version 5.1.
    Thanks,
    Michael
    Michael Girdley
    BEA Systems Inc
    "anil" <[email protected]> wrote in message
    news:399aba85$[email protected]..
    How we can override default error page (404) in WebLogic ver 4.5.1 ? Wehave already set property weblogic.httpd.errorPage.404=URL in
    weblogic.properties file , but it is not working with 4.5.1
    >
    We would like to have solution in properties setting, because changing thecode is not possible
    >
    Thanks in Advance
    anil

Maybe you are looking for