RE: P_PCLX Object in HR

Hi,
Can any one explain me the exact use of P_PCLX object in HR.
i went through some document and it says
"This object is used in the authorization check when accessing PCLx (x = 1, 2, 3,4) HR files using the PCLx buffer (interface supported by HR)."
what is PCLx buffer?
can anyone explain me about this object more clearly.
Thanks in Advance,
SS

Hi,
In december last year there was also something about PCLx and there was this hyperlink
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21f083446011d189700000e8322d00/content.htm
I suggest you look in to that.
Have fun
Bye Jan van Roest

Similar Messages

LDB PNP authorization check authorization object

Hi,
I have used LDB PNP for HR reports.
We are using the authority check also, but the problem is all the records/data for all the people is being read by the report where some of the people data should not have been read as they belong to some other personal area that the role of the executer (user).
Hence it appears that authorization check is not working properly.
Following is how I am using it, Please suggest corrections or alternate way to correct this issue.
    rp-provide-from-last p0002 space gwa_outlist-begda
                                                    gwa_outlist-begda.
    IF pnp-sw-found NE '1' OR
        pnp-sw-auth-skipped-record EQ '1'.
        EXIT.
    ELSE.
        ls_tab-vorna = p0002-vorna.
        ls_tab-nachn = p0002-nachn.
    ENDIF.
Please reply with the corrections ore alterations,
Thanks in advance.
Akash.

Hi,
(1)
Actually, if you're wirting report with PNP LDB, you do NOT need to do this hard-coded auth checking at all. Because the LDB abap code behind PNP has already do this job for you.
So all you need to do is to ask you HR consultant or Basis consultant to modify the authority config of certain ROLE with t-code PFCG, and then assign that ROLE to certain user with t-code SU01.
ABAP code behind PNP will automatically verify the current user according to his ROLE setting.
(2)
In some case you do not work with LDB report, then you need to do the authority check by yourself. General function AUTHORITY_CHECK is what you need. AUTHORITY_CHECK do the authority check by means of Authority Object.Belows are authority objects used in HR module(you can also see in PFCG if technial name switched on):
P_ORGIN    HR: Master Data
PLOG       Personnel Planning
P_PCLX     HR: Clusters
P_TCODE    HR: Transaction codes
Sample of checking personal area:
CALL FUNCTION 'AUTHORITY_CHECK'
     EXPORTING
          FIELD1              = ' PERSA'
          OBJECT              = 'P_ORGIN'
          USER                = 'SAPSUPPORT1'
          VALUE1              = 'Z001'
     EXCEPTIONS
          USER_DONT_EXIST     = 1
          USER_IS_AUTHORIZED = 2
          USER_NOT_AUTHORIZED = 3
          USER_IS_LOCKED      = 4
          OTHERS              = 5.
IF SY-SUBRC NE 2.
MESSAGE E001(01) RAISING AUTH_FAILED.
ENDIF.
Reward if helpful pls!

Error while activating a routine "no object list"

hi
I am getting a error while activating a routine Rv50c601
"There is no object list for INCLUDEs" Please suggest on the error and resoulution
regards
Nishant

Try running program RV80HGEN.
Regards,
Naiimesh Patel

Error in VBA reference for Adobe Photoshop CS4 Object Library

Hello,
I'm using Windows 7 Pro, MS Office 2010 Pro and Creative Suite CS4 (with all updates).
I will automate Photoshop via Visual Basic for Applications in MS Access.
Befor using there the Adobe Photoshop CS4 Object Library I must reference it in VBA.
But when I will du this, I get the message "Error loading DLL".
When I will manually reference to the WIASupport.8LI File, I get the error: "Cannot reference this file"
Can you give a tip, how I can solve this problem?
Regards

I have the same problem! I have photoshop cc2014 (which we own) and the object library shows, but not for cs 5.1 (30 day trial).
Does registering unlock something?
Help please!!

Logical Database in Abap Objects

Hi to All
I want do it a program report using a Logical Database.
Is this possible ??? But when I make a GET <node>, occurs the following error:
         "" Statement "ENDMETHOD" missing. ""
I'm doing the following:
CLASS MONFIN IMPLEMENTATION.
       METHOD TRAER_DATOS.
               GET VBRK.
       ENDMETHOD.
ENDCLASS.
Please, somebody tell me how I use the logical database in Abap Objects.
Thank you very much
Regards
Dario R.

Hi there
Logical databases whilst of "some use" are not really part of OO.
If you want to use a logical database in an abap OO program I would create a special class which just does the get data from your DB and pass this either at record or table level.
Techniques such as GET XXXX LATE aren't really part of any OO type of application since at Object Instantiation time you should be able to access ALL the attributes of that object.
As far as OO is concerned Logical databases are a throwback to "Dinosaur Technology".
Since however modules such as SD and FI are still heavily reliant on relational structures (i.e linked tables etc) then there is still some limited life in this stuff but for OO try and solve it by another method.
If you really must use this stuff in OO then do it via a FMOD call and save the data in a table which your method will pass back to your application program.
You can't issue a GET command directly in a method.
Cheers
Jimbo

Null and empty string not being the same in object?

Hello,
I know that null and empty string are interpreted the same in oracle.
However I discovered the strange behaviour concerning user defined objects:
create or replace
TYPE object AS OBJECT (
value VARCHAR2(2000)
declare
xml xmltype;
obj object;
begin
obj := object('abcd');
xml := xmltype(obj);
dbms_output.put_line(xml.getStringVal());
obj.value := '';
xml := xmltype(obj);
dbms_output.put_line(xml.getStringVal());
obj.value := null;
xml := xmltype(obj);
dbms_output.put_line(xml.getStringVal());
end;
When creating xml from object, all not-null fields are transformed into xml tag.
I supposed that obj.value being either '' or null will lead to the same result.
However this is output from Oracle 9i:
<OBJECT_ID><VALUE>abcd</VALUE></OBJECT_ID>
<OBJECT_ID><VALUE></VALUE></OBJECT_ID>
<OBJECT_ID/>
Oracle 10g behaves as expected:
<OBJECT><VALUE>abcd</VALUE></OBJECT>
<OBJECT/>
<OBJECT/>
However Oracle 9i behaviour leads me to the conclusion that oracle
must somehow distinguish between empty string and null in user defined objects...
Can someone clarify this behaviour?
Thus is it possible to test if object's field is empty or null?

However Oracle 9i behaviour leads me to the conclusion that oracle
must somehow distinguish between empty string and null in user defined objects...
Can someone clarify this behaviour?
Thus is it possible to test if object's field is empty or null?A lot of "fixes" were done, relating to XML in 10g and the XML functionality of 9i was known to be buggy.
I think you can safely assume that null and empty strings are treated the same by Oracle regardless. If you're using anything less than 10g, it's not supported any more anyway, so upgrade. Don't rely on any assumptions that may appear due to bugs.

"cacheHostInfo is null" and Add-SPDistributedCacheServiceInstance : Object reference not set to an instance of an object.

I am working on a standalone install Sharepoint 2013 (no Active Directory). I found newsfeed feature is not available and checked Distributed Cache service is stopped. When start it “cacheHostInfo is null” is returned.
I checked the Windows service “AppFabric caching service” is stopped because the default identity “Network Service” not work. Then I change the AppFabric service identity to use “.\administrator” (which is also the sp farm administrator) and the service can
be started.
However the “cacheHostInfo is null” when try to start Distributed Cache service in central admin.
I searched on web and found this blog: http://rakatechblog.wordpress.com/2013/02/04/sharepoint-2013-spdistributedcacheserviceinstance-cachehostinfo-is-null/
I tried to run the script but it return error:
Add-SPDistributedCacheServiceInstance : Object reference not set to an
instance of an object.
At C:\root\ps\test.ps1:8 char:13
+ $whatever = Add-SPDistributedCacheServiceInstance
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidData: (Microsoft.Share…ServiceInstance:
SPCmdletAddDist…ServiceInstance) [Add-SPDistributedCacheServiceInstance]
, NullReferenceException
+ FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletAddDistr
ibutedCacheServiceInstance
I am not sure what went wrong. Please give me some idea? Thank you for any comment!

Can you deploy Active Directory as installing without is not a supported installation scenario - http://support.microsoft.com/kb/2764086.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Open and Close Posting Periods According to G/L Account Assignment Objects

Hi,
Can anybody please explain me how configurations related to " Open and Close Posting Periods According to G/L Account Assignment Objects " works in SAP FICO? I am confused about this config.
Regards,
Mandeep

Hi Mandeep ,
First i would like to tell about fiscal year
fiscal year is nothing but a financial year of company in sap . it contain 12 normal periods and 4 special periods.In genaral we will call like month but that is sap that is a period. so 12 period for 12 months ok next special period will use in all companies for audit and tax adjustment purpose of previous year.
coming to the open and close periods.in sap for security purpose we have to open one period like this month july so i opened july period only we cant post the pervious month (june)and we cant post future month lik in (Auguest)ok
You can close and open periods by transaction ob52.
In transaction ob52 there are account types
+ Valid for all account types
A Assets
D Customers
K Vendors
M Materials
S G/L accounts
V Contract accounts
+ means all types. if you want to open vendor then enter period from and to according to your fiscal year.
you cant adjust items in closed period. if you want to then you have to open the period
For your information.....
posting periods also open user level tc S_ALR_87003642.
customization levael OB52.
Regards
Kumar

Two resultset objects

IS it possible to define two resultset objects with two different queries inside the same DB class?java.sql.SQLException: Invalid state, the ResultSet object is closed.
     at net.sourceforge.jtds.jdbc.JtdsResultSet.checkOpen(JtdsResultSet.java:299)
     at net.sourceforge.jtds.jdbc.MSCursorResultSet.next(MSCursorResultSet.java:1123)
     at DB5.getDetails(Daily_Quote_Response_report.java:238)
     at Daily_Quote_Response_report.main(Daily_Quote_Response_report.java:74)
java.util.List items = null;
        String query;
        String query2;
        try {
            query =
                   "select * from oqrep_except_resp_summary";
            query2 = "select * from oqrep_except_resp_detail";
            Statement state = conn.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE,
                    ResultSet.CONCUR_READ_ONLY);
            ResultSet rs = state.executeQuery(query);
            ResultSet rs2 = state.executeQuery(query2);
          //cannot create two rs objects // ResultSet rs2 = state.executeQuery(query);
            items = new ArrayList();Edited by: bobz on 03-Dec-2009 11:16
Edited by: bobz on 03-Dec-2009 11:16

Note: This thread was originally posted in the [Java Programming|http://forums.sun.com/forum.jspa?forumID=31] forum, but moved to this forum for closer topic alignment.

Open field in object S_TCODE

I've deleted a tcode from a role in menu tab. Now when I look at the object S_TCODE in the role it has an open(blank) field. I cannot delete this blank field from the object as S_TCODE shows up only in display mode though you enter the role in change mode. Further I do not see this blank field in the menu tab assuming that the blank field might got transfered from the menu. Please suggest how to remove the blank field from the object?
Thank you,
Partha.

Hi,
I had some similar issues already. The yellow status of S_TCODE came from a blank entry in the menu. If the menu is big, its hard to find that entry, which has to be removed from the roles menu. As a workaround to identify that 'blank' entry check table agr_hier for that role. Select Reporttype=TR and Report= (means leave the field empty and set as operator '='.
In the field Parent_ID you can identify now the node under which this entry is located and with the OBJECT_ID you can find the text in table AGR_HIERT (with that text you can use the search function in pfcg to find that entry(ies).
Then simpyl delete these entries from the menu and merge the authorizations. S_TCODE shall be 'green' afterwards.
b.rgds, Bernhard

Can't print OLE objects when 9i report developed in 6i

Hi,
I am migrating my reports from 6i to 9i. I just open report in 9i which is already developed in 6i and run the report it don't print OLE objects. It shows when I run report in Designer Preview, but in printing it shows blank
--Vijay

Hello,
The answer is in the Migration FAQ :
When I open an Oracle6i Reports Developer report in the Oracle Reports Builder 10g and run my Web layout, I get an empty Web page in my browser.
http://www.oracle.com/technology/products/reports/htdocs/faq/faq_migration.htm#368
Regards

Questions on ADF View Objects, Links and Iterators

I have a number of questions regarding using ViewObjects in applications where there are alot of relationships between tables.
First, lets say that I have ViewObject SomeView that was added to the App Module (AM) as VO1. And because it has a number of "detail" records that have to be iterated through in a "report like" view it has those other VO's added under it as "children" in the AM.
So I have
VO1 (an instance of SomeView)
--> VO2 (an instance of some other view)
--> VO3 (an instance of some other view)
that is used on pages where only a single VO1 is shown at a time.
Now because I had another page I wanted to make that had a listing of all SomeView objects. Some of the fields in SomeView are foreign keys to records in VO2 and VO3 and while I don't want to show all the fields from VO2 and VO3, I do want to show a name field from each rather than just the foreign key.
My experience (though I've never read this anywhere) tells me that when doing a "table" that is a list of rows from a VO, you can't display info from the child VO's because the child VO's are on whatever record corresponds to the "currentRow" in the parent VO and just displaying the rows in a rangeSet doesn't make each the "currentRow" so even we display 10 records in a for loop, the "currentRow" is just one, and the child VO's iterators aren't moved as we go through the for loop. (Can someone confirm if I am correct on this conclusion????)
So the only way I know of to show some field from a related table in each row is to make the VO have the entity objects from the related tables be part of the view as references. Is this the only way?
If I do that on a view that didn't have other views as children defined in the AM I don't have any problem and it works like I want.
But if I do it on a view that did have other views as children defined in the AM it makes the page(s) using that view with the children iterators behave badly. Half the information quits showing up, etc.
For example, ... if I go to the "SomeView" which was defined with only one entity object association, and I add the entity objects (that are the basis of instances of VO2 and VO3 ) as referenceable only, it totally breaks the page where I display a single VO1 and use it's VO2 and VO3 children. IS THIS NORMAL OR AM I MISSING SOMETHING?
So, is the solution that I have to have more view objects defined for different purposes ?
Can anyone give any general guidelines for when/where to use different view objects vs. when to use different iterators. I'm not having much luck with using secondary RSI's and haven't found much info on them.
Also, how about issues of naming iterators that are in various binding containers (ie. UI Model for a page). If I do and LOV it creates an iterator and gives it a default name like ViewNameIterator1. If I already have a different page that uses a regular (non LOV) iterator with that name, and the user goes back and forth between those pages, is that a clash?
Finally, I've read a couple of Steve Muench's blogs on View Link consistency but I'm not sure what the rules are on when it applies and doesn't. How you turn it on or off, etc. One of his examples in http://radio.weblogs.com/0118231/2004/02/27.html talks about it in the context of two view objects that are NOT typically "linked" in a master/detail kind of way. Like an AllDepartments and a DepartmentsLessThan view. Do you have to create a View Link between them to have results of one be reflected in the other if they aren't used in the same page in a web app? Or does it happen automatically (with the caveat that you have to do the rowQualifies method). Just feels like I'm missing some pieces.
Thanks in advance,
Lynn

Hi,
I am also interested in a best-practice note from oracle.
Currently we store history in seperate history tables for columns that changed. All this implemented in our BaseEoImpl overriding the EntityImpl.prepareForDML().
Thanks

Questions on scripts, tables & transfer objects between clients.

1. In script, how to use the same print program for two different layouts? with procedure.!
2. Why cant sapscripts be client independent.?
3. Want to maintain a table in dev server and if i update the data, it should simultanously update in Quality and Production servers. How? please explain in details.
4. How to transfer object between clients.? explain.
Points will be promptly rewarded for HELPFULL answers.!

Hi!
3. With SE01, you can create a transport request for all table entries.
SE01 - Create button - Workbench request - Give description and save
Select the created request and click on Display object list.
Click on Display - Change button
Insert line button
ProgID: R3TR
Object: TABU
Object name: Z_YOUR_TABLE
Double click on the table name
Insert line
Key: *
Save everything
Release the transport in SE10 transaction and transport with STMS transaction.
Regards
Tamá

Open as linked smart object

Hello,
iam looking for a solution to open files in a folder
and copy then into a document.
Its working good, but i need the files to be linked smart object.
Anyone knows a solution ?
Here my Code so far:
See in line 33. Convert to smart object: ?
var file = new File('C:/User_MY PATH.PSD'),
docRef = open(file);
// Use the path to the application and append the samples folder
var samplesFolder = Folder('C:/USERS_MY FOLDER');
//Get all the files in the folder
var fileList = samplesFolder.getFiles()
// open each file
for (var i = 0; i < fileList.length; i++)
// The fileList is folders and files so open only files
if (fileList[i]instanceof File)
open(fileList[i])
// use the document name for the layer name in the merged document
var activeDocName = app.activeDocument.name;
var targetDocName = activeDocName.substring(0, activeDocName.lastIndexOf("."));
// Copy the Document
app.activeDocument.selection.selectAll()
//convertToSmartObject(); THIS ISNT WORKING - CONVERT IT ?
app.activeDocument.selection.copy()
// don’t save anything we did
app.activeDocument.close(SaveOptions.DONOTSAVECHANGES)
//Select specific layer to paste the copy, this is to make sure the layers are in a specific position
var doc = app.activeDocument;
doc.activeLayer = doc.artLayers.getByName("bgr");
//Paste Document
app.activeDocument.paste()
app.activeDocument.activeLayer.name = targetDocName

Use scriptlistener:
var idPlc = charIDToTypeID( "Plc " );
    var desc2 = new ActionDescriptor();
    var idnull = charIDToTypeID( "null" );
    desc2.putPath( idnull, new File( "C:\\Photos\\myPhoto.psd" ) );
    var idLnkd = charIDToTypeID( "Lnkd" );
    desc2.putBoolean( idLnkd, true );
    var idFTcs = charIDToTypeID( "FTcs" );
    var idQCSt = charIDToTypeID( "QCSt" );
    var idQcsa = charIDToTypeID( "Qcsa" );
    desc2.putEnumerated( idFTcs, idQCSt, idQcsa );
    var idOfst = charIDToTypeID( "Ofst" );
        var desc3 = new ActionDescriptor();
        var idHrzn = charIDToTypeID( "Hrzn" );
        var idPxl = charIDToTypeID( "#Pxl" );
        desc3.putUnitDouble( idHrzn, idPxl, 0.000000 );
        var idVrtc = charIDToTypeID( "Vrtc" );
        var idPxl = charIDToTypeID( "#Pxl" );
        desc3.putUnitDouble( idVrtc, idPxl, 0.000000 );
    var idOfst = charIDToTypeID( "Ofst" );
    desc2.putObject( idOfst, idOfst, desc3 );
executeAction( idPlc, desc2, DialogModes.NO );

A dynamic View object at runtime

Say there is an inputtext component and one LOV. User will enter a number, say 7, and then press a Submit button. And then in the LOV, user will be able to see the numbers from 1 to 7.
Is it possible to achieve the same?

Hi,
am not sure what exactly you are trying to achieve here,
but from your description, it looks like a query dependency to me..
So in your VO that will be used as the List of Values for the attribute you want, create a View Criteria that meets the requirement you want (seems like 'Less than or Equal To' is what you need).
So eventually, you will end up with a ViewCriteria and one bindVarialble in that LOV View Object.
Since you havent described your BC model, I can only assume that you have one main VO and both UI component are binded to attributes of that VO.
Now go back to your main VO and update the LOV View AcCessor to use the ViewCriteria specifying the proper value on the Bind Variable.
Hope this helps,
Regards,
Dimitrios.

RE: P_PCLX Object in HR

Similar Messages

Maybe you are looking for