Re: Pavilion dm4 2070us; Wifi connectivity icon not showing correct status

Hello,
Did this ever get resolved? My laptop is having the same problem. I'm connected to the internet, and even when I go to another house, it still shows as though I'm not connected when I am.
Please let me know if there's a resolution.
Thanks.

Hi @SophiaKight ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dm4-2070us Notebook and having issues with the Wireless for Windows 7. Here is a link for troubleshooting the Wireless connection.
Here is a link to the HP Support Assistant. Just download and run the application and it will help with the software and drivers on your system it has built in Wireless troubleshooting assistance. If you have told your Notebook to connect automatically to your home network unless you tell it to connect to a different Network it will show connected.
You will have to disconnect and reconnect to a different Network.
Let me know how this goes.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

Photosmart C310: WiFi connected, but not showing up in network via Mac or iPhone

I am using a HP Photosmart Premium C310. It is connected to WiFi, but does not show up on Mac or iPhone via Wifi:
- iPhone Airprint does not find the printer (select printer)
- Mac "add printer" does not find the printer
- newest HP Setup Application (HP_Lion_Ink_SW_v12.13.14, Dec 2011) finds printer only as long as connected via USB, reconfigures WiFi settings, but can not re-find the printer when USB cable is taken off
- I can send "ping" to the printer using the IP address shown in touchscreen info panel so it is online in WiFi
- I tried to reset factory settings for settings + network settings, no change...
Is that a defect or any idea how to fix the problem?
Best regards, any help appreciated...

Hi,
Per your description, i believe the issue may being caused by your router compatibility with Apple Bonjour, which require multicasting support in order to operate propertly.
In order to verify, try to temporary create an ad hoc connection between your iPhone and the printer and check for any change:
Step One : Restore the network defaults on the HP All-in-One
On the product control panel, touch the Setup icon ( ). The Setup menu displays.
Touch Wireless .
Touch and then slide your finger down on the display to select Restore Network Defaults .
When asked 'Are you sure? ' touch Yes .
After the network defaults restore, touch Wireless Connection , and then touch On .
The message 'Wireless Radio is now on ' should briefly display on the control panel and the Wireless light ( ) on the HP product should start to blink. The HP product is now openly broadcasting the ad hoc wireless network.
Step Two: Create an ad hoc wireless network connection between the HP All-in-One and the Apple device
On your Apple device, tap the Settings icon ( ).
Tap Wi-Fi .
Under Choose a network , find the name that starts with HPC310 , and then tap it. A checkmark should display to the left of the name.
Wait three minutes to make sure that the ad hoc connection is established and try printing from the iPhone by taping the Action icon ( ) and then tapping Print.
If you were able to print through the direct printer, it means the router more likely cause the problems..
Please clarify your router brand, model and the router firmware version if available.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

SBS 2008 Security report not showing correct status after Feb patch cycle

Hello,
I wonder if anyone can shed any light on this strange problem which has occurred after February patch cycle. On the SBS detailed report that comes through, the security section is showing as RED error. Though
if you look at the detail, each section is listed as green compliant. Not sure why this has happened? Has anyone else seen this before?
Many thanks,

Hi,
Can you provide me the detailed information about the patch you installed before the issue occurred? Have you tried to uninstall the patch and reinstall it again to see if the same issue persists?
In addition, please also try to repair the monitoring and reporting feature to see if it could resolve the issue.
Repair monitoring and reporting features in Windows Small Business Server 2008
http://technet.microsoft.com/en-us/library/dd560614(v=ws.10).aspx
Hope this helps.
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Andy Qi
TechNet Community Support

Wifi connect icon disabled for K900

Dear Lenovo phone experts,
Just within few hours of working of lenevo K900, the wifi connect icon is disabled and not able to now connect to wifi on my new lenevo K900.
Thank you, Bharat

This is the first time I'm hearing this issue, I'm also an K900 user but this never happmed to me or my other friends.
Are you sure that's the right password, maybe its case sensitive, because this bug is not present in K900.
Facebook Profile I'm a carefree type of guy but always there to help, so if you have anything to ask don't hesitate.

On 3G we cannot send emails from either our iPhones or iPad and this also happens with some WiFi connections but not all. Yet we can always send emails from our Hotmail Email account. What is causing this and what do we need to do to resolve it?

On 3G we cannot send Business emails from either our iPhones or Ipad and this also happens with some WiFi connections but not all. Yet we can always send emails from our Hotmail Account using both 3G and WiFi.
We bought the iPhones and Ipad so that we could send emails while we are out of the Office, but we are not able to do this unless we can find a WiFi connection. Incoming emails are fine. We use IMAP, for Business emails just incase this is relevant and I know that Hotmail is POP3.
Our technical IT knowledge is not great, so we look forward to your suggestions as to how to resolve this.

Contact whomever supports the email account and get the correct Outgoing email server settings from them.

Compaq 15 wifi icon not showing in windows 7

Hello I have a PC Notebook Compaq 15 h000ss, I have just installed Windows 7 64 bits and the wifi icon is not showing, the wifi adapter is not showing either in device manager, and the light on the f12 wifi key is always on. Please, any idea on how can I get my wifi adapter working? (it was working before in Windows 8.1) Thank you

Hi: Please do the following and I will post the link to the wireless card driver you need... Go to the Device Manager and click on the Network Controller device. At the top of the Network Controller window, click on the Details tab. Now you see a Property drop down list that is defaulted to Device Description. Drop down on that and select the second item (Hardware ID's). Now you see 3-4 lines of characters, the top line starting with PCI\VEN. Post that top line of characters.

I have an ipad also wifi at home. Would is needed to use my wifi connection while not at home?

I have an ipad also wifi at home. Would is needed to use my wifi connection while not at home?

You can't use your wi-fi connection when not at home. Heck, my wi-fi connection bales out halfway down the back garden. Many places offer wifi hot-spots. Go google. The only (relatively) surefire way to be able to get on the internet anywhere is to have a 3G capable iPad and corresonding data plan.

Got a new LG in Anchorage and was told Glennallen, AK is in a service area. Got home and all I get is Message 41, Roaming. Can make calls with WiFi connection but not on the road. Any idea whats going on?

Got a new LG in Anchorage and was told Glennallen, AK is in a service area. Got home and all I get is Message 41, Roaming.
I can make calls with WiFi connection but not on the road. Any idea whats going on?

Oh no! I'm sorry to hear you had problems in the are you're in AkJohnDye. I checked your coverage and I do see we have an extended 4G coverage. This means you're able to use your phone but it needs to be activated in a 4G LTE Verizon Wireless coverage zone. I apologize.
AdaS_VZW
Follow us on Twitter at @VZWSupport

Adobe Connect does not show tool pointer/cursor when sharing Photoshop...

I am an online instructor and one of the courses I teach is a Photoshop course. Each week I host a Live Lecture session where we use Adobe Connect to demonstrate techniques and tools in Photoshop CS6.
I am receiving several complaints from students because Adobe Connect does not correctly show my cursor/pointer when it changes for each tool in Photoshop. All the students see is an arrow with a small icon of a face/monitor.
This is confusing to the students, because I am trying to demonstrate how to use a tool and they are unable to see the actual tool. For example, when I select the brush tool - they should be able to see the brush circle as the cursor. I then demonstrate how to resize the brush - but they cannot see it. Another example is any of the healing/cloning tools. If I select the healing brush tool, they cannot see the circle (brush). I then demonstrate how to record a healing point by selecting the Option (alt) key - but again the students cannot see the pointer change to the crosshairs to record the healing point - as all they see is the arrow with icon at all times.
Students are complaining that they are not able to comprehend what I am demonstrating because they are not able to get the full affect of the demonstration without seeing it how it should be. Prior to switching to Adobe Connect, we used WebEx - which showed the students everything correctly as I was demonstrating it. I was amazed to learn that Adobe Connect does not show everything - especially since I am using another Adobe program within Adobe Connect - you would think they would be fully compatible and able to show everything.
Thank you

I just saw this option for the first time last week. Very exciting to see it finally in Connect! There is a small amount of lag for the viewers, but nothing that can't be compensated for.

Button Icons not show in Form 11g run time

Button Icons not show in Form 11g
I installed the following tools :-
Weblogic Server 10.3.6
SE JDK 6U35 64bit
Oracle Portal,Forms,Report,and Discoverer Services (11.1.1.4.0)
1. Create a "icons" folder and place all gif images in there :-
C:\Oracle\Middleware\Oracle_Form1\forms\java\<icons>
2. Within icons i made a jar file of all gif images :-
C:\Oracle\Middleware\Oracle_Form1\forms\java\icons\jar -cvf frmicons.jar *.gif
3. Copy this new jar file into :-
C:\Oracle\Middleware\Oracle_Form1\forms\java\
4. Edit formsweb.cfg file:
imageBase=codebase
archive=frmall.jar,frmicons.jar
5. Edit Registry.dat file:
default.icons.iconpath=/forms/java
default.icons.iconextension=gif
After doing above configuration i create a form and place an icon on the button.
Set button's icon property = Yes and give name of icon without extension.
When i run the form not display icons who configure icons.
Please give the solution how to set icons on button.
Thanks & regards,
Java console message :-
Java Plug-in 1.6.0_25
Using JRE version 1.6.0_25-b04 Java HotSpot(TM) Client VM
User home directory = C:\Users\Shiv
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
Forms Session ID is formsapp.8
The proxy host is null, and the proxy port is 0.
Native HTTP implementation is being used for the connection.
The connection mode is HTTP.
Forms Applet version is 11.1.2.0
FRM-92471: unable to load image exit for iconic button item

Duplicate post. Refer to comments in Push Button Iconic not show in Forms 11g

After upgrade ios 7 and itune 11 iphone icon not showing up on itune

I've just upgraded my iphone4 to ios 7. also upgraded itunes to 11.1, but then when I connect my iphone onto my PC, the iphone icon not showing up on itune, I can only see it as a camera device on file explorer in windows8, what can I do?

Please read this :
http://support.apple.com/kb/ts1538
Hope I helped.
Donnie.

My usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility

my usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility

Either the physical drive or the enclosure electronics has failed. The light you are seeing is powered by the USB connection, the power, electricity, all USB ports put out. That doesn't mean the actual physical hard drive or the USB to SATA bus electronics are working properly. If it doesn't show in Disk Utility then it is DEAD.
Most of the time it is the enclosures electronics that fail. Removing the physical drive from the enclosure and put it in another enclosure or using a SATA to USB adapter, one that has it's own AC power supply, might allow you to get the files off the drive.

Icons Not displaying correctly in Bridge 6

in bridge 6. Image Icons in layered psd images do not show changes I have made – for example added or deleted layers.
Also some image icon as above shows just the first layer, not added layers. I open the image in cs6 and it is correct. The correct image is saved and working; but the icon does not show the correct image.
Of 30 images I have worked on over the weekend there are only two in the folder that do not show correctly. The files are not bigger/smaller than the correct ones and all of them are psd. Any ideas? Thanks, Bob

in bridge 6. Image Icons in layered psd images do not show changes I have made – for example added or deleted layers.
Assuming with Image icons you mean the thumbnails in the content panel and that you are using Bridge CS 6 (which has Bridge version 5)?
The short route to check is selecting one one the problem thumbnails and with right mouse click from the menu choose 'purge cache for selection'.
If this works then go to the menu tools / cache / purge cache for folder and you should be OK.
If not you have to provide more details about computer specs, OS version and exact Bridge version

Air Play icon not showing up in menu bar. How do I fix this?

Air Play icon not showing up in menu bar. How do I fix this?

What year is the MacBook Pro from?
AirPlay: iOS and Mac

HT204380 facetime icon not showing in settings anymore

My facetime icon not showing in the main page & settings anymore...I am using an iPod touch 4th gen...please help!

thanks!

Re: Pavilion dm4 2070us; Wifi connectivity icon not showing correct status

Similar Messages

Maybe you are looking for