Re: Peculiar behaviour while MRP
Hi All,
I am facing a situation which I am not able to understand. I am trying to run MRP for a FG which has stock in place & Safety stock.On entering some PIR via MD61 & running the MRP the planned order created is of a quantity more than required.
It shoild have been 109 But its appearing 124.875.On drilling down I found there were two components.
1.Pegged requirment=109
2 Procurement without requirement=15.1875
Please explain me system behavious
Hi,
Please check the following values for the Material in the Material Master (MM02/MM03) :
MRP type , Component Scrap , Assembly Scrap, Lot size , Safety stock and Scrap percentage if any mentioned in BOM item details.
Even the scrap percentage mentioned in the Material Master and BOM will considered while creating the procurement proposals. Check those values and get back.
Regards
radhak mk
Similar Messages
-
Creation of production order while mrp run
hi
ppgurus
can any body explain how to create a production order by mrp run
ie
sysytem should create the production order directly while mrp run not PLANNED ORDERS
what settings i need to do for this plz explain
urgent requirement
regards
sasikanthHI
you gave a good way to solve the problem
if it is a make to stock REM
i need not convert planned order to production oreder right
plz suggest in that scenario where i need to do availability check
in REM for which oder type (say PE IS STANDARD)
to be assigned for availability check
plz suggest because in spro (t -code opjk) at order controll
i dint see the order type PE
the order controll (opjk) in discreet :- avialability checking rule assigns
in which setting this setting to be done in REM -
Peculiar behaviour in picking file from FTP in File-IDoc scenario
Dear XI Expert,
I have successfully completed configuration of FTP --> XI --> IDoc scenario. I have noticed a peculiar behaviour in picking the file from FTP. I placed a file on FTP and activated File Adapter with poll interval '60' secs and processing mode as 'Archive'. For the first time it has picked the file with expected behaviour and IDoc got posted to SAP successfully. But when I placed file for the second time and when refreshed the FTP directory, immediately file got archived without waiting for 60 secs. But in sxi_monitor I could not see any activity of processing this scenario. Surprise is that, file got archived in target directory. This goes on and on... without registering any activity of processing the message in Message monitoring.
In adapter monitoring it shows the message as described below:
<i>History:
2006-05-09 22:57:25 : Processing started
2006-05-09 22:57:25 : Error: Processing interrupted due to error: FTPEx: No such file
2006-05-09 22:57:24 : Processing started
2006-05-09 22:57:24 : Error: Processing interrupted due to error: FTPEx: No such file</i>
For your information my SAP XI system is on SP16.
Please find below the parameters of sender adapter:
<i>Quality of service: Exactly once
Poll interval: 60 secs
Processing mode: Archive
Connect Mode: Per File Transfer
Transfer Mode: Binary</i>
Can anybody help me out in resolving such a problem in this scenario?Hi Jayakrishnan,
Thanks for your reply.
Once again the same problem is noticed. i.e., for the first time when file adapter is activated the file got picked, activities were logged in monitoring and IDoc got posted to destination system. For the second time when file is placed, before 60 secs got completed the file is picked and archived in the target directory. No activities in monitoring are logged.
I have tried it checking the message at adapter level, but it is showing 'No results' (even in the case of successful pick of the file for the first time, not even it is showing other file adapters).
I was not able to understand where the problem could lie?
Regards,
Suraj Kumar -
While MRp run which time is taken into consideration(from PIR or from MM)
Hi PP gurus,
When we run MRP which time is taken into consideration for a bought out material :
From Material Master ( Planned delivery time)
or
From Purchase Info record : the delivery time mentioned in the PIR ..
In my case the MRp run is showing 2 different results in different systems for the same material.
Also please let me know that if there is any priority that can be set in SPRO for picking up the time while MRP run and what takes priority and when.Hi!,
If you are getting two different values after MRP in two different systems then please check:
1. whether any other info record exist for the same material in any of the system.
2. Have you maintained source list in both the systems for the material. How many sources are defined in the source list and in what sequence. If you have not maintained a quota arrangement then system will take first line item of the source list.
You can't set the priority for the planned delivery time but you can set whether system should take planned delivery time from info record or not in IMG setting Material Management > Consumption based Planning > Planning > Procurement Proposals > Define External Procurement. To use the planned delivery time from info record you must maintain a source list for that material with same vendor. Also make that source as MRP relevant.
Regards,
Uday -
Urgent : While MRP (MD02) :syntex error
Dear All,
while MRP run I am facing the syntex error
"Syntax error in Formula FST_01
Message no. CR323
Diagnosis
An error occurred in the formula definition.
Procedure
Define the parameters for the formula in Formula FST_01."
Please provide ur valuable inputs to solve the issue.
Thanks in advance,
Vijay MankarDear Mr.Vijay,
1.Is there any Variable size item in the BOM.Please check this.
2.If so check in OS15 - Define variable size item Formulas,whether the formula has been created properly.
3.Also check whether you have used your own formula in work centre.
4.If so,please check whether you have maintained proper formula parameter in OP17.
5..Also check the formula is created properly in OP21.
<u>I'm sure your problem might be because of variable size item formulas.</u>
Check with this revert back.
Regards
Mangal -
Labels Batch No allocation in Purchase requistion while MRP Run
Dear Experts,
While running the MRP PR are generated for labels as per BOM to purchase department, but in our case labels are purchased by purchase department, So can i give the batch number to purchase department through PR, so that they can print the labels as per the batch number mentioned in PR.
Regards,
Phalgun PatelDear Phalgun,
Thanks for your appreciations.
In PR you can maintain texts at Header level or at Item level. Go to transaction ME52N - Change PR & Enter your required PR no.
Now if you want to maintain some common texts for your complete PR then enter Header Texts. For that you can click on the Expand Header tab below the bucket trolley or press Ctrl+F2. Texts tab will be opened. Now you can enter the texts in the field of Header texts.
If you want to enter the texts specific to any Items, then you have to enter texts at Item level. For that you have to select that item and click on the Collapse Item Details or press Ctrl+F7. There also you can select the individual items from drop down which are present in the PR. Select Texts tab and there you can enter the required texts, in your case you can enter the required Batch No. for those items. Here you have different options like item texts, Item Note, Delivery texts etc. etc. You have to double click on those options where you want to enter the texts.
Further for your information, to copy those texts in to PO, you need to do the customizing with the help of your MM Consultant. Also you can print those texts on your output.
Hope now this will be clear to you.
Regards,
Hiren Ramani -
Peculiar behaviour of a query !!!
Hi
Have a peculiar issue with one of my user -
A query is executed at the db level is hung from 1.30 PM IST to 4.30 PM IST and
the same query executes in seconds post 4.30 PM IST.
+"An application is down daily during early hours EST and its up automatically after 4:30 PM IST.+
+A query does'nt run at that time but the same Query is working fine after 4:30 IST to fetch the results and display."+
What could be the possible reasons for such an behaviour of an query/application?
Findings from my end -
Generated explain during 1.30 - 4.30 pm ist and after 4.30 pm ist - No difference noticed.
Query is running fine in dev and qa.
No major changes made except unix team has made a DIMM replacement recently in prod.
Regards
DBAPX Wait Time
SID SID SERIAL# ORA USER MACHINE STATUS LOGON_TIME MODULE COMMAND Waiting for (Seconds)
243 35214 ARQ_APP schlw005 INACTIVE 01:01:24 27-AUG-10 JDBC Thin Client NONE SQL*Net message from client 20888
244 33606 PRC_APP SOFTTEKGE\STKMY05284 INACTIVE 16:52:40 24-AUG-10 PL/SQL Developer NONE SQL*Net message from client 157852
248 31905 CIA_APP schlw005 INACTIVE 01:01:25 27-AUG-10 JDBC Thin Client NONE SQL*Net message from client 20887
258 35263 ARQ_APP schlw006 INACTIVE 11:32:42 23-AUG-10 JDBC Thin Client NONE SQL*Net message from client 328608
260 337 LVMSOUSER tnsp01826 INACTIVE 05:50:36 27-AUG-10 JDBC Thin Client NONE SQL*Net message from client 80
275 59915 SAM_APP tnsp01826 INACTIVE 02:06:43 27-AUG-10 JDBC Thin Client NONE SQL*Net message from client 2835
277 54769 MSO_APP gpsd023d INACTIVE 10:36:37 25-AUG-10 JDBC Thin Client NONE SQL*Net message from client 159176
278 44661 ARQ_APP schlw006 INACTIVE 08:49:54 26-AUG-10 JDBC Thin Client NONE SQL*Net message from client 78966
279 30674 ARQ_APP schlw005 INACTIVE 01:01:21 27-AUG-10 JDBC Thin Client NONE SQL*Net message from client 20891
282 3258 LVMSOUSER tnsp01826 INACTIVE 02:13:41 27-AUG-10 JDBC Thin Client NONE SQL*Net message from client 660
284 43634 MSO_APP PSAMER\SCGVLDV15PSGE INACTIVE 14:19:28 24-AUG-10 ASizeQueue1.exe NONE SQL*Net message from client 20
285 36069 CIA_APP schlw005 INACTIVE 01:01:27 27-AUG-10 JDBC Thin Client NONE SQL*Net message from client 20885
286 9410 ARQ_APP schlw006 INACTIVE 11:32:44 23-AUG-10 JDBC Thin Client NONE SQL*Net message from client 77875
290 64610 LVMSOUSER tnsp01819 INACTIVE 05:32:56 27-AUG-10 JDBC Thin Client NONE SQL*Net message from client 178
292 43190 PPW_APP SOFTTEKGE\STKMY02439 INACTIVE 15:00:59 26-AUG-10 NONE SQL*Net message from client 55250
293 41994 LVMSOUSER tnsp01819 INACTIVE 02:51:29 27-AUG-10 JDBC Thin Client NONE SQL*Net message from client 145
303 9906 LVMSOUSER tnsp01826 INACTIVE 02:13:43 27-AUG-10 JDBC Thin Client NONE SQL*Net message from client 3534
306 17290 SYS tsgsp01503 INACTIVE 06:25:08 27-AUG-10 rman@tsgsp01503 (TNS NONE SQL*Net message from client 1226
V1-V3)
307 59667 MSO_APP tnwp04113 INACTIVE 00:50:48 26-AUG-10 JDBC Thin Client NONE SQL*Net message from client 82375
308 28200 ARQ_APP schlw005 INACTIVE 01:01:21 27-AUG-10 JDBC Thin Client NONE SQL*Net message from client 20891
312 63896 SPT_APP tnsp01819 INACTIVE 01:12:28 27-AUG-10 JDBC Thin Client NONE SQL*Net message from client 19190
316 53964 LVMSOUSER tnsp01819 INACTIVE 02:51:31 27-AUG-10 JDBC Thin Client NONE SQL*Net message from client 178
320 60237 ARQ_APP schlw006 INACTIVE 08:55:46 26-AUG-10 JDBC Thin Client NONE SQL*Net message from client 78656
323 17306 MSO_APP tnwp04112 INACTIVE 02:25:33 26-AUG-10 NONE SQL*Net message from client 15
336 57045 ARQ_APP schlw005 INACTIVE 01:01:20 27-AUG-10 JDBC Thin Client NONE SQL*Net message from client 2368
337 53462 MSO_APP PSAMER\TSGWP00891 INACTIVE 06:38:32 27-AUG-10 orddrw32.exe NONE SQL*Net message from client 424
338 21534 SPT_APP SATHIC-PCS0179 INACTIVE 05:41:15 27-AUG-10 Oracle SQL Developer PL/SQL EXECUTE SQL*Net message from client 4096
342 45576 CIA_APP schlw005 INACTIVE 01:01:27 27-AUG-10 JDBC Thin Client NONE SQL*Net message from client 20885
344 32553 ARQ_APP schlw006 INACTIVE 09:21:53 26-AUG-10 JDBC Thin Client NONE SQL*Net message from client 77148
351 15019 MSO_APP gpsd025d INACTIVE 16:52:31 23-AUG-10 NONE SQL*Net message from client 76529
353 10951 ARQ_APP schlw006 INACTIVE 11:32:42 23-AUG-10 JDBC Thin Client NONE SQL*Net message from client 77461
357 19421 SSO501836470 SATVCC-PCS29498 INACTIVE 06:39:38 17-AUG-10 SQL Developer NONE SQL*Net message from client 860645
359 54328 SPT_APP SATHIC-PCS0179 INACTIVE 05:40:54 27-AUG-10 SQL Developer PL/SQL EXECUTE SQL*Net message from client 1122
362 11722 ARQ_APP schlw006 INACTIVE 08:47:49 26-AUG-10 JDBC Thin Client NONE SQL*Net message from client 79238
367 26337 PPW_APP SOFTTEKGE\STKMY02439 INACTIVE 15:01:03 26-AUG-10 SELECT SQL*Net message from client 56906
371 24065 ARQ_APP schlw006 INACTIVE 08:32:07 26-AUG-10 JDBC Thin Client NONE SQL*Net message from client 80013
375 28388 MSO_APP tnwp04113 INACTIVE 07:56:33 26-AUG-10 JDBC Thin Client NONE SQL*Net message from client 33463
376 29500 TSE_APP PSAMER\NYSCHA13PSGE INACTIVE 11:45:08 24-AUG-10 vb6.exe NONE SQL*Net message from client 3071
377 39083 ARQ_APP schlw005 INACTIVE 01:01:20 27-AUG-10 JDBC Thin Client NONE SQL*Net message from client 20892
378 18493 ARQ_APP schlw006 INACTIVE 08:30:29 26-AUG-10 JDBC Thin Client NONE SQL*Net message from client 80343
379 45633 PRC_EAI gpsd023d INACTIVE 15:09:23 25-AUG-10 JDBC Thin Client NONE SQL*Net message from client 7878
380 34065 MSO_APP PSAMER\TSGWP00891 INACTIVE 02:17:07 27-AUG-10 orddrw32.exe NONE SQL*Net message from client 813
381 55914 PRC_APP gpsd025d INACTIVE 06:49:24 27-AUG-10 NONE SQL*Net message from client 3
383 49394 MSO_APP PSAMER\SCGVLDV14PSGE INACTIVE 14:16:24 24-AUG-10 ASizeQueue1.exe NONE SQL*Net message from client 20
384 46410 NIR_APP PSAMER\TNWP04017 INACTIVE 06:22:40 27-AUG-10 w3wp.exe NONE SQL*Net message from client 22
385 6233 ARQ_APP schlw006 INACTIVE 08:42:02 26-AUG-10 JDBC Thin Client NONE SQL*Net message from client 79386
386 64769 MSO_APP PSAMER\TSGWP00891 INACTIVE 03:55:46 27-AUG-10 orddrw32.exe NONE SQL*Net message from client 10426
388 41602 ARQ_APP schlw006 INACTIVE 09:21:54 26-AUG-10 JDBC Thin Client NONE SQL*Net message from client 77022
389 58831 MSO_APP PSAMER\TSGWP00891 INACTIVE 06:48:12 27-AUG-10 orddrw32.exe NONE SQL*Net message from client 77
397 43630 LVMSOUSER tnsp01819 INACTIVE 05:32:54 27-AUG-10 JDBC Thin Client NONE SQL*Net message from client 163
400 62339 ARQ_APP schlw006 INACTIVE 09:16:57 26-AUG-10 JDBC Thin Client NONE SQL*Net message from client 77326
402 8283 ARQ_APP schlw006 INACTIVE 08:36:50 26-AUG-10 JDBC Thin Client NONE SQL*Net message from client 79768
407 4412 ARQ_APP schlw006 INACTIVE 08:42:02 26-AUG-10 JDBC Thin Client NONE SQL*Net message from client 79461
410 40080 LVMSOUSER tnsp01826 INACTIVE 05:50:34 27-AUG-10 JDBC Thin Client NONE SQL*Net message from client 3470
PX Wait Time
SID SID SERIAL# ORA USER MACHINE STATUS LOGON_TIME MODULE COMMAND Waiting for (Seconds)
416 45596 SAM_APP schlw005 INACTIVE 01:01:16 27-AUG-10 JDBC Thin Client NONE SQL*Net message from client 20896
421 58122 ARQ_APP schlw005 INACTIVE 01:01:20 27-AUG-10 JDBC Thin Client NONE SQL*Net message from client 2425
424 59346 ARQ_APP schlw006 INACTIVE 12:08:11 25-AUG-10 JDBC Thin Client NONE SQL*Net message from client 80446
425 32760 ARQ_APP schlw006 INACTIVE 08:53:44 26-AUG-10 JDBC Thin Client NONE SQL*Net message from client 78742
426 22752 MSO_CMB PSAMER\SCGVLDV15PSGE INACTIVE 14:20:05 24-AUG-10 CombinationQueue.exe NONE SQL*Net message from client 26
430 2006 SAM_APP tnsp01819 INACTIVE 01:07:36 27-AUG-10 JDBC Thin Client NONE SQL*Net message from client 137
432 63852 ARQ_APP schlw006 INACTIVE 14:10:35 24-AUG-10 JDBC Thin Client NONE SQL*Net message from client 80374
436 16435 MSO_APP gpsd025d INACTIVE 16:52:30 23-AUG-10 NONE SQL*Net message from client 6
442 44324 NIR_APP PSAMER\TNWP04017 INACTIVE 06:47:44 27-AUG-10 w3wp.exe NONE SQL*Net message from client 5
444 63735 ARQ_APP schlw006 INACTIVE 09:16:56 26-AUG-10 JDBC Thin Client NONE SQL*Net message from client 77409
448 47232 ARQ_APP schlw006 INACTIVE 09:06:03 26-AUG-10 JDBC Thin Client NONE SQL*Net message from client 78026
450 34890 ARQ_APP schlw005 INACTIVE 01:01:20 27-AUG-10 JDBC Thin Client NONE SQL*Net message from client 2151
451 36355 HOT_ADMIN tsgsp01503 INACTIVE 22:46:16 15-AUG-10 emagent@tsgsp01503 ( NONE SQL*Net message from client 53
TNS V1-V3)
452 1123 ARQ_APP schlw006 INACTIVE 08:36:50 26-AUG-10 JDBC Thin Client NONE SQL*Net message from client 79692
455 50524 ARQ_APP schlw006 INACTIVE 11:32:41 23-AUG-10 JDBC Thin Client NONE SQL*Net message from client 328610
458 16436 ARQ_APP schlw006 INACTIVE 11:32:42 23-AUG-10 JDBC Thin Client NONE SQL*Net message from client 78146
460 8422 MSO_APP gpsd023d INACTIVE 10:36:31 25-AUG-10 JDBC Thin Client NONE SQL*Net message from client 159181
463 54816 SYS tsgsp01503 INACTIVE 06:25:08 27-AUG-10 rman@tsgsp01503 (TNS NONE SQL*Net message from client 10
V1-V3)
468 32257 MSO_APP PSAMER\TSGWP00891 INACTIVE 02:25:03 27-AUG-10 orddrw32.exe NONE SQL*Net message from client 813
469 7614 ARQ_APP schlw006 INACTIVE 09:06:03 26-AUG-10 JDBC Thin Client NONE SQL*Net message from client 78108
471 58246 BTT_APP PSAMER\T00627489 INACTIVE 15:47:37 13-AUG-10 BTT.exe NONE SQL*Net message from client 78268
474 2395 ARQ_APP schlw005 INACTIVE 01:01:21 27-AUG-10 JDBC Thin Client NONE SQL*Net message from client 20888
477 7799 ARQ_APP schlw005 INACTIVE 01:01:20 27-AUG-10 JDBC Thin Client NONE SQL*Net message from client 2423
478 45166 ARQ_APP schlw006 INACTIVE 09:10:20 26-AUG-10 JDBC Thin Client NONE SQL*Net message from client 77707
482 17264 CIA_APP schlw005 INACTIVE 01:01:25 27-AUG-10 JDBC Thin Client NONE SQL*Net message from client 20887
488 50488 MSO_APP PSAMER\TSGWP00891 INACTIVE 03:55:56 27-AUG-10 VisioController.exe NONE SQL*Net message from client 10213
489 25653 CIA_APP schlw005 INACTIVE 01:01:25 27-AUG-10 JDBC Thin Client NONE SQL*Net message from client 20887
490 20069 SPT_APP tnsp01826 INACTIVE 03:05:13 27-AUG-10 JDBC Thin Client NONE SQL*Net message from client 8020
492 25833 ARQ_APP schlw006 INACTIVE 08:32:06 26-AUG-10 JDBC Thin Client NONE SQL*Net message from client 80078
493 59680 MSO_APP PSAMER\SCGVLDV14PSGE INACTIVE 06:49:29 27-AUG-10 BomQueueProgram.exe NONE SQL*Net message from client 2
503 61354 ARQ_APP schlw006 INACTIVE 09:00:11 26-AUG-10 JDBC Thin Client NONE SQL*Net message from client 78300
504 32549 ARQ_APP schlw005 INACTIVE 01:01:22 27-AUG-10 JDBC Thin Client NONE SQL*Net message from client 20890
505 36802 SYSTEM bsepdlm2.ae.ge.com INACTIVE 05:28:46 27-AUG-10 Admin Connection NONE SQL*Net message from client 4753
508 954 DBSNMP tsgsp01503 INACTIVE 05:16:35 22-JUN-10 emagent@tsgsp01503 ( NONE SQL*Net message from client 38
TNS V1-V3)
509 60380 ARQ_APP schlw006 INACTIVE 08:49:52 26-AUG-10 JDBC Thin Client NONE SQL*Net message from client 79030
510 40208 SAM_APP schlw006 INACTIVE 02:01:04 27-AUG-10 JDBC Thin Client NONE SQL*Net message from client 17308
513 48521 ARQ_APP schlw006 INACTIVE 11:32:42 23-AUG-10 JDBC Thin Client NONE SQL*Net message from client 77181
515 29925 ARQ_APP schlw006 INACTIVE 09:10:21 26-AUG-10 JDBC Thin Client NONE SQL*Net message from client 77626
522 49851 SPT_APP SATHIC-PCS0179 INACTIVE 05:41:15 27-AUG-10 Oracle SQL Developer PL/SQL EXECUTE SQL*Net message from client 4096
527 36970 MSO_CMB PSAMER\SCGVLDV14PSGE INACTIVE 14:15:15 24-AUG-10 CombinationQueue.exe NONE SQL*Net message from client 6
535 10196 PRC_APP SOFTTEKGE\STKMY05284 INACTIVE 18:05:29 24-AUG-10 PL/SQL Developer PL/SQL EXECUTE SQL*Net message from client 74332
543 29238 ARQ_APP schlw006 INACTIVE 09:00:10 26-AUG-10 JDBC Thin Client NONE SQL*Net message from client 78423
296 40839 DBSNMP tsgsp01503 ACTIVE 22:46:11 15-AUG-10 emagent@tsgsp01503 ( NONE Streams AQ: waiting for mess 3
TNS V1-V3) ages in the queue
315 39000 SYS tsgsp01503 ACTIVE 06:27:23 27-AUG-10 backup archivelog NONE Backup: sbtwrite2 1188
345 46680 MSO_CMB PSAMER\SCGVLDV15PSGE ACTIVE 06:47:07 27-AUG-10 CombinationQueue.exe UPDATE db file sequential read 0
352 51633 MSO_CMB PSAMER\SCGVLDV14PSGE ACTIVE 06:49:21 27-AUG-10 CombinationQueue.exe UPDATE SQL*Net message from client 0
370 28991 SYSTEM INDGE\703062610L ACTIVE 05:33:46 27-AUG-10 SQL*Plus SELECT SQL*Net message to client 0
422 45900 SYS tsgsp01503 ACTIVE 06:27:41 27-AUG-10 backup archivelog NONE Backup: sbtwrite2 649
PX Wait Time
SID SID SERIAL# ORA USER MACHINE STATUS LOGON_TIME MODULE COMMAND Waiting for (Seconds)
439 6507 SPT_APP SATHIC-PCS0179 ACTIVE 09:43:27 26-AUG-10 SQL Developer SELECT db file sequential read 0
464 12988 ACTIVE 11:09:50 07-AUG-10 NONE Streams AQ: qmn slave idle w 52456
ait
486 55921 SYS tsgsp01503 ACTIVE 06:27:29 27-AUG-10 backup archivelog NONE Backup: sbtwrite2 1197
494 1 ACTIVE 00:57:58 24-JAN-10 NONE Streams AQ: waiting for time 872
management or cleanup tasks
501 1 QMNC ACTIVE 00:57:48 24-JAN-10 NONE Streams AQ: qmn coordinator 1711915
idle wait
530 3 ARC0 ACTIVE 00:57:42 24-JAN-10 NONE idle 88
532 64509 SYS tsgsp01503 ACTIVE 06:27:35 27-AUG-10 backup archivelog NONE Backup: sbtwrite2 851
534 3 ARC1 ACTIVE 00:57:42 24-JAN-10 NONE idle 55
542 9234 TBSPT tsgsp01503 ACTIVE 23:59:57 26-AUG-10 UPDATE latch: cache buffers chains 2
544 1 MMNL ACTIVE 00:57:30 24-JAN-10 NONE idle 5464
545 1 MMON ACTIVE 00:57:30 24-JAN-10 NONE idle 315
546 1 CJQ0 ACTIVE 00:57:30 24-JAN-10 NONE idle 139
547 1 RECO ACTIVE 00:57:30 24-JAN-10 NONE idle 24
548 1 SMON ACTIVE 00:57:30 24-JAN-10 NONE idle 105
549 1 CKPT ACTIVE 00:57:29 24-JAN-10 NONE idle 1
550 1 LGWR ACTIVE 00:57:29 24-JAN-10 NONE idle 0
551 1 DBW1 ACTIVE 00:57:29 24-JAN-10 NONE idle 2
552 1 DBW0 ACTIVE 00:57:29 24-JAN-10 NONE idle 2
553 1 MMAN ACTIVE 00:57:29 24-JAN-10 NONE idle 17089
554 1 PSP0 ACTIVE 00:57:29 24-JAN-10 NONE idle 137
555 1 PMON ACTIVE 00:57:29 24-JAN-10 NONE idle 61920
123 rows selected. -
hi all
I have a FERT for which raw materials are assigned in the BOM. but while running MRP, the BOM is not being exploded and the list doesnt show the raw materials.
I have checked in the Overall maintenance of the plant parameters in MRP in SPRO and the required paramenters are maintained.The scenario is MTS - strategy 10.but still the BOM is not exploded.
Could anyone solve my query
Thank you in advance
chandraHi Chandra,
Could you please check if there was an exception message "50 or 52"? If so then it can be beacuse for the BOM explosion date system is not able to get a BOM.
If there were no exception messages then check in MRP4 view of the FERT material for dependent requirement defination. This should be blank.
Hope this helps..
Regards,
Prasobh
Reward your points if this was helpful. -
Strange behaviour while charging
My iPad 1is unusable while charging.
In iBooks, for instance, it will not change pages properly, either moving between pages randomly without user input, or refusing to change pages when directed.
In other apps, different forms of unusual behaviour occur, all seeming to be associated with random detection of user input when none is applied, or incorrect response to real user input.
It operates normally when off charge.
Any advice, please.Are you using the Apple supplied cable and power adapter or third party accessories? Are you charging by plugging the power adapter into a wall socket?
I would check the cable, the power adapter, change the wall socket - do the basic things first and try to narrow down the cause. It just be that your cable is bad - it could have a hairline crack that you cannot see - try another cable from an iPod or iPhone - do some experimentation. -
Strange Behaviour while scanning from Canon MP600r with 10.5.7
Dear all,
I am working with the Canon MP600r (wifi) and scanned without any probs in Tiger. In Leopard I could not scan until 10.5.5. came out. Again everything was fine. Now in 10.5.6 and 10.5.7 I have strange problems: I can use the preview, abut while scanning suddenly it says that there is no communication with the scanner...!!
Hope for little help
Thanks
BernhardHello Bernhard,
Your issue sounds like there may be a problem with signal strength. I would open the Canon IJ Network Tool (which you can access via the Utility icon from the Printer Queue) and check the signal strength.
If the strength is okay then you could try scanning at a low resolution, such as 75dpi. If you usually scan at a higher resolution, then scanning at a lower resolution will make the scanned file smaller and if that works then you know you still have a network quality issue. What brand and model of wireless router do you have?
PaHu -
Hello friends;
My requirement is such that when i run mrp in MD02, system should not consider those sales order that are planned in previous MRP run. System should consider new sales orders that are created after MRP run.
Waiting for reply.
Thanks.Hi,
One solution is go for individual Sales Order/Line Item MRP run using T.code MD50.
But I can't understand problem with use of MD02.If Receipt element(Plan order)is there which contains the Account Assignment of that Sales Order line Item then I don't think system will replan for same Sales Order Line item.
Regards,
Dhaval -
Erratic behaviour while firing a BAPI
Hi All,
In my application, I am using a BAPI.
I enter an account no in the text field and data corresponding to it is returned.
The problem I am facing is that, very rarely a data for different acccount no is returned. This happens 1 in 20000 times approx.
I have tested the BAPI in SAP R/3 number of times. It works fine there everytime.
Is this a problem related to BAPI. Kindly help me to know why this very rare erratic behaviour occurs at front end.
Regards,
NikhilHi,
Place the code which executes the BAPI and fetches data in others block of Web Dynpro component or view and call it from anywhere. This will ensure sequencing of requests.
//@@begin others
synchronized void testMethod()
//@@end
Plz remember following points:
a) the scenario u have posted should be reproducible otherwise you can't check whether code changes of above have taken effect or not.
Regards,
Ganga -
Peculiar behaviour with pathfinder/apply stroke to group
Hello all!
Although I have lurked on this forum for a while, this is my first post, so apologies for any etiquette breach!
I've been using Illustrator (CS4/MacOSX) for a while, but every now and then it throws me a curve ball. Either that or I'm having a particularly gormless evening and failing to spot something obvious!
I hope posting images is ok, it'll help me explain my dilemma!
First question is this. Is it possible to outline a group - not each individual component, but the edge of a whole group? To achieve something like this 'sticker' effect:
http://i22.photobucket.com/albums/b310/mewsie80/nana.gif
Which I had to go about a long-winded way and create a copy of the whole thing, use 'expand appearance' to expand out the strokes, then pathfinder to 'unite' into one shape, then apply a stroke to that and place it under the grouped leaves. Seems such a faff - and Illustrator is smarter than that, I'm sure.
What am I missing?!
Anyway - using my crazy work around, I am trying to do the same thing with this image of an axolotl:
http://i22.photobucket.com/albums/b310/mewsie80/roscoe01.gif
Now - if I do the same as I did previously, to expand out the brush strokes (the red of the gills):
http://i22.photobucket.com/albums/b310/mewsie80/gills1.gif
Then use the 'unite' command in pathfinder, it seems to lose its definition and just do strange things to the shape:
http://i22.photobucket.com/albums/b310/mewsie80/gills2.gif
So it sort of scuppers my work around! Can't think of a reason why this is the case - earlier on I was getting even stranger results that I couldn't replicate to show you.
I've even relaunched Illustrator, but still getting the same effect.
Anyway - thanks a million in advance for your help - hopefully you can point me in the right direction
Thanks folks,
CarolineCaroline,
Is it possible to outline a group - not each individual component, but
the edge of a whole group? To achieve something like this 'sticker'
effect
You can fake it if you:
1) Select the group,
2) In the apearance palette/panel tick Add New Stroke,
3) Drag it down below the Contents in the (main) Appearance palette/panel.
Note that only the outer half of the added stroke shows behind the group (less if the objects are stroked). -
Strage behaviour while executing the Procedure
Hi All,
In Schema "Dwr_trade" we have one procedure Proc1. There is another schema
" Dwr_trade_user " this schema has execute privilege on Proc1 of "Dwr_trade" schema.
When we are executing the procedure Proc1 from "Dwr_trade" schema as follows
Dwr_trade --- (Procedure is created here)
Begin
Exec procedure Dwr_trade.Proc1
End;
It gives error ,but when we are executing the same procedure after removing the prefix "Dwr_Trade" it is executing successfully.
when we are executing the procedure from "Dwr_trade_user " then also is working fine.We are executing it as follows.
Dwr_trade_user
Begin
Exec procedure Dwr_trade.Proc1
End;
Any pointer why this is giving error in 1st case.
Many Thanks
DikshitBegin
Exec procedure Dwr_trade.Proc1 <----Isnt Syntax prob
End;
SQL> CREATE OR REPLACE PROCEDURE mypro AS
2 BEGIN
3 null;
4 END;
5 .
SQL> /
Procedure created.
SQL> EXECUTE PROCEDURE mypro;
BEGIN PROCEDURE mypro; END;
ERROR at line 1:
ORA-06550: line 1, column 7:
PLS-00103: Encountered the symbol "PROCEDURE" when expecting one of the following:
begin case declare exit for goto if loop mod null pragma
raise return select update while with <an identifier>
<a double-quoted delimited-identifier> <a bind variable> <<
close current delete fetch lock insert open rollback
savepoint set sql execute commit forall merge
<a single-quoted SQL string> pipe
SQL> EXECUTE PROCEDURE scott.mypro;
BEGIN PROCEDURE scott.mypro; END;
ERROR at line 1:
ORA-06550: line 1, column 7:
PLS-00103: Encountered the symbol "PROCEDURE" when expecting one of the following:
begin case declare exit for goto if loop mod null pragma
raise return select update while with <an identifier>
<a double-quoted delimited-identifier> <a bind variable> <<
close current delete fetch lock insert open rollback
savepoint set sql execute commit forall merge
<a single-quoted SQL string> pipe
The symbol "PROCEDURE" was ignored.
SQL> EXECUTE mypro;
PL/SQL procedure successfully completed.
SQL> EXECUTE scott.mypro;
PL/SQL procedure successfully completed.Khurram -
Hi Experts,
I am looking for answer for a strange behavior of planning,
I am having std BOM for FG ( Finished good) having ATO attribute enabled at org level. Child part of FG is 'Comp1 ( purchase item) and there is no routing. Now sales order is book for FG having qty 1 with project xyz, also progressed further. Now work order is also created for it for this SO demand. WO contains project and task info.
Now I am running MRP . Here workbench shows that cancel the work order created by progressing SO line and release another planned order which will be get converted into work order further.
Logically, we have created work order for a SO demand, then why planning is suggesting cancel exisitn work order and release another work order from workbench. What is reason behind this strange behavior.
More info - organization is project enabled, plan options : reservation level = project-task, hard pegging level = project-task, FG item attribute value for 'pegging level' = 'End assembly / hard pegging'.
Thanks in advance / DipakThanks for your comments Sandeep. WIP project is same as SO project and WO is not firm.
I have seen that ATO ' assemble to order' business means - all child comps are in stock, so just matter of assembly. With this base line, these item should not be planned from planning, but there child comp will be planned from planning. I have done the same, also seen that WO belongs to non-mrp planned items, will be considered as demand. so corresponding MRP planned comp will be planned. This is my obervation / understanding. what you think ..
Regards,
Dipak
Maybe you are looking for
-
3.0.1 won't save 3 files as one
three pcm .wav files are dragged side-by-side onto track one in multi-track view. they range in size from 2gB to 1/2 gB. they display in edit view as a single wave form that is five and one half hours in length. when the entire waveform is selected,
-
MacBook Pro not booting up after Software Update ('prohibited' symbol)
Hi there I'm having some issues with my (late 2008) MacBook Pro after installing a recent software update: the machine is not booting up, instead displaying the 'prohibited' symbol on the grey bootup screen, thus: !http://img828.imageshack.us/img828/
-
More info needed on BC Dynamic menus and using CSS with them
Hi all, The BC Gurus tutorial on Dynamic Menus and how to style them with CSS made no sense to me, unfortunately. The presentation was too rushed and the screen too small to see what was happening. In a previous question I found out how to apply CSS
-
Error trying to Schedule a report in my CMC - Connectivity issue ODBC
Hi, I'm in a world of pain at the moment with my CMC. I can't schedule a report to even distribute them to a BO inbox. Setup : BOXI 3.1 on RH linux Ent 5.0 with data server being on a remote machine. The error I receive is A database error occured. T
-
Jdeveloper- web service- can't produce wsdl for java List
Hi- I think this is a jdeveoper bug. It looks like the same bug as #4706306 in Jdeveloper 10g bugs. There is a workaround suggest to use additional classes in the web service. But it does not work on 11g. Details of the problem ........ I am trying t