Re: port on 8330 won't allow me to synch although I can charge
"upgraded" to Bold and trying to synch and transfer data but my computers not recognizing Curve. It recognizes bold, therefore problem is either Curve port or USB cable. The Port isn't loose (already had that experience with a previous Curve), but charging requires "just right" insertion into port. But it will charge. What are my options so I can get on with transfer. Thought about getting new cable from Blackberry but can't find reference for such purchase. Have used other adaptors on port without charging difficulty. But when I noticed port becoming sensitive decided to change before I would have data transfer problem..
Phone has not been synced in past
In store technical service is a thing of the past with Verizon. What are my options?
You have a warranty, it came with your device and the year started the day you activated it (or perhaps bought it)
http://www.apple.com/support/ipad/
contact support, enter your serial number of your device and see what they tell you.
As to your frozen screen, have you tried to reset it? Hold down the sleep and home keys for about 20 seconds. See if you can get it to reboot. If you see a silver apple, it's rebooting.
Similar Messages
-
What can I do for an Ipod that won't update, won't allow you to eject it, and can't reset either? I can simply unplug it from my pc and after a while it runs down and works fine after a charge. Wanting to clear data and sell but nothing seems to work. The ipod was originally set up on a different computer and with a different I tunes account as well. Would that make any difference?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Next
Try disabling the computer's antivirus and firewall.
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
- Then try on another computer -
When publishing a captivate I get the message "Swf compilation failed. Note: Please verify if any of the actionscript keywords is used as user variable name." and it won't allow me to publish the Captivate, can anyone help?
Hi There,
Can you tell me the Operating System and Captivate version you are using?
Also can you confirm if you are getting this issue will this one project or all the projects? Try to copy paste this project on a new blank project and then try to publish.
Regards,
Mayank -
hi
I have purchased a iphone 3g, it appears that it was jail broken. I don't know what that means. I tried to restore the phone to factory settings but it won't allow me.
What can i do?No support or assistance can be provided here for jailbroken devices.
-
We recently bought an Apple Mac and now I cannot download music from ITunes to my Ipod Nano. Although the name of the Ipod comes up, I cannot load any music on it any more. Our last computer had Microsoft software and I was told this is the reason the Mac will not allow any downloading. Do I have to clear the music off my Ipod and start again? Please help.
- To change ID go to Settings>Store and sign out and sign in with the one you want. If you iPod has iOS 5 you may have to also go to Settings>iCloud and sign into the second account.
- Apps are locked to the account that purchased them.
- To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account. -
Earlier, I downloaded Mt. Lion (currently using Snow Leopard). Download went fine but to Install, something seems to have hung up with quitting open applications. Keeps telling me to do that, but each time I hit the blue button to quit open applications, won't do that. I've tried quitting anything open in the dock, still says I need to quit open applications. Tried quitting Install for Mt. Lion so I could restart and try again. Can't do that either. What to do now? Any help appreciated.
CMD+OPT+esc should bring up the Force Quit Application. Select the Install ML app, and click Force Quit. That should do the trick. Then, save yourself some grief and copy it to a safe place because the ill-designed installer deletes itself during the installation process, necessitating wasting resources DLing it again if you need to reinstall or recover it.
-
The iPad just won't allow apps without the code. Can anyone help?
I live in Ireland. Not the UK. So I don't have a postal code. Without a postal code I have no billing address. Without a billing address I can get no apps. Any ideas?
This can be caused by a number of issues.
Was everything working and then suddenly stopped??
Or is this a new clean setup and has never worked.
Do you have a cable modem which is not a router and the TC setup in bridge? That will cause it. The TC must be in router mode, ie dhcp and nat.
Check the IP the MBP gets including dns and gateway..
Then check the ipad/iphone.. post what IP dns and gateway (router in applespeak) they get. -
hi
I have purchased a iphone 3g, it appears that it was jail broken. I don't know what that means. I tried to restore the phone to factory settings and i cant does anyone have a way to get around this and beat the error 1015 code.Sorry dean,
We do not provide support on this forum for jailbroken devices. You should do a Google search to see if you can get some help elsewhere.
Sorry,
GB -
ITunes Match won't allow me to delete playlist, How can I fix this.
I was trying to clean up my iTunes library, by deleting some old playlist that are not doing the work for me anymore. Guess what?, after I had deleted all the playlist I didn't need, iTunes Match restore them all when I did an iTunes match update. I want to stop this from happening, please help.
Stop invoking the Update iTunes Match command after you delete the playlists. There is no reason for you to use it in this situation. Just delete the playlist from iTunes or the iOS device and they will be removed from all the devices.
-
I was able to to leave a rating, but the dialogue box won't allow me to insert text.
Can anyone help?The forum where you posted (this thread may have been moved by the time you read this) is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes Store forum.
Regards. -
My iPod is connected to my PC but constantly says "do not disconnect" it won't allow me to sync
my iPod is connected to my PC but constantly says "do not disconnect" it won't allow me to sync
Hi EMussio,
Thanks for visiting Apple Support Communities.
See this article for some help with safely disconnecting your iPod:
Safely disconnect iPod
http://support.apple.com/kb/ht1853
Once it's disconnected, follow the steps at this link to reset/restart your iPod:
http://www.apple.com/support/ipod/five_rs/classic/
If the sync issue persists, you may need to restore the iPod.
Best Regards,
Jeremy -
K7n2 delta, won't allow me to connect to the internet via pci modem
motherboard: K7n2 delta, nforce2 ultra
won't allow me to connect to the internet via pci modem
i have got 2 computers with same mobo, can connnect through external 56k
but the 2 internal 56ks (one in each computer), will not connect.
just dials then beeps, or no dialing tone.
the 2 internal ones are differnet makes, but connect through PCI
there must be something wrong with Mobo settings or pci stuff
all internet and modem settings are correct, etc etc etc
can u help
or does anyone have a pci 56k running on that mobo?Quote
Originally posted by Solway
i made my creative one work and dial, using pulse dialing, but it takes ages
but my other one has no dialing tone, its werid.
If your not hearing dial tone you might have your phone plugged into the wrong port. Most modems have 2 outlets, one is labeled line ( that is the one you should have plugged into the jack (RJ11C). If that's correct, query the modem and see if it tests OK, you may have a defective modem. -
My Time Capsule won't allow me to access my home wireless network for several hours each day -- usually between 1000-1830 or so. My modem is working correctly and I can still get on-line by going straight from my computer (MacBook Pro) to the Ethernet port. It must be the Time Capsule -- any ideas?
Any ideas?
Wireless Interference
Might be caused by a cordless phone in the vicinity. To give you an example, my neighbor.....across the street...used to be able to literally crash my wireless network if he was in his front yard talking on his cordless phone.
I discovered this by accident one day after spending weeks trying figure out why my network would crash at random times.
Other possibilities include a wireless security/camera system near you
Still other things might be an amateur ham radio operator....which should not interfere....but again from experience, I know that this can occur.
Yet another possibility is another wireless network near you that is being turned on and off at random times. Some users power up their modem/router only when they want to do so and leave it off otherwise.
Some general rules to help avoid interference:
Move any cordless phones that you might have as far away as possible from the Time Capsule and/or your computer(s)
Avoid placing other electronic devices....computer, television, amplifier, satellite receiver, etc. near the Time Capsule and/or your computer(s)
Avoid metal surfaces near the Time Capsule and/or your computers
Elevate the Time Capsule as much as possible. Think of it as a water sprinkler....you want to get the room as wet as possible
Experiment with different wireless channels on the Time Capsule. To do this:
Open AirPort Utility
Click on the Time Capsule
Click Edit
Click the Wireless tab
Click Wireless Options
Start with Channel 11 on the 2.4 GHz band and work your way down
It is unlikely that you are picking up interference on the 5 GHz band since there are.....for now at least.....far fewer networks using this frequency. -
I just purchased an ipad2 and I can receive e-mails but I can't reply to or forward them. I also can't send a new e-mail. I receive a message that the e-mail has been placed in the outbox because the server won't allow 'relaying.' On my laptop, using the same e-mail server, I am fine. What can I do to make the ipad2 e-mail function properly?
Contact whoever manages your email server and ask them what ports and security to use for SMTP from remote locations. ISPs and email admins often require different SMTP settings when sending email when not connected to the server's or ISP's network.
-
Won't allow me to set an smtp password can't send emails
can't send emails won't allow me to set smtp password
When you say won't let you set the outgoing mail password, have you gone to Settings > Mail, Contacts, Calenars > Accounts and the account name > Outgoing Mail Server > Primary Server > Password and set the password at that point? Do you have SSL switched ON or OFF as required by your carrier, and do you have Authentication set to Password, and the Server Port set to what your carrier wants to see, usually 25?
Maybe you are looking for
-
Problem with statement after upgrading to 11g
Hello, We recently upgraded to 11g from 9i and one of our statements we routinely use no longer works. The statement is: delete from ALLEMPLOYEES x where exists( (select * from ALLEMPLOYEES where email_id=x.email_id) minus (select * from X_ALLEMPLOYE
-
How do I make one corner rounded?
Hey, Firstly, I'm using Illustrator CS6. I'd like to round a specific corner of a shape (a rectangle to be specific). I've seen in other posts that the CornerEffects.jsx script should work. But every time I select my rectangle, go to File > Scripts >
-
Tags not showing up in Dreaweaver cs5
Hello and thank yuo for reading my problem. I'm working on my website and i came across this issue: Dreamweaver cs5 ''disabled''? some of the tags, for example <video>, <source>, <media>, and a few others. The only tag witht he letter v is <var>, i h
-
Mask clipping only works with absolute widths and heights
Hi all for some reason this works: <s:BorderContainer height="404" width="504" borderColor="0x000000" borderWeight="2" backgroundColor="0x000000" filters="{[dsf]}" cornerRadius="10"> <s:Group id="mask"> <s:Rect wid
-
hi abaprs, i have displayed my alv in container using cl_gui_alv_grid->set_table_for_first_display, now i have 'edit' button on my screen, i want to make certaion fields of a raw selected by user to editable mode when user push that button, i have go