Re : posting in t-code mmpv by year

Hai
        For company code the posting already the year is 2000 i want change that year directly to 2008. i dont want to change by month.
thanks
mani

Hello,
As in the earlier replys, the changes can be done directly in OMSY if no master data or transactions has been done in the company code. You need to close the posting periods one by one upto the current period in MMPV.
There is an alternative, create a posting period variant,
(copy the posting periods from 1000) and change it to the new variant, change the year for all the account types
(+, A,D,K,M,S) and save it, assign it to your company code. Now try to post any material document.
Prase

Similar Messages

  • T.code MMPV: managing period material master records (two questions ...)

    Hi All,
    I have some doubts about t.code T.code MMPV:
    - this t.code is for opening a new period: how to know the periods already opened?
    - if a new period is opened by mistake? Could I come back to the (two) previous (also managing tables by SE16N)?
    Thanks
    Gandalf

    Hi,
    Use T. Code: MMRV and enter ur company code and can see/check/view which period is open for ur company code.
    Before closing a period, you must ensure that all transactions are related like GR, GI, IR posted to respective period. In MM side you can post current period and current minus one period. If any transaction related to not posted and you close the period, you can consult FICO team for further action.
    It is possible to re-open a previously closed period. However, it is NOT advisable to do so because the valuation data of the previous period could be affected.
    In general, it is only safe to reopen a previously closed period when no material postings have been done after the period shifting to the new period. If there has already been postings after the period shifting to the new period, reverting the period back will cause database inconsistencies in the history tables.
    If you decide to proceed with this process, you can use the program RMMMINIT, but, please review the documentation of this program first!! and the check the SAP notes 487381 (for the error message that you are receiving) and the 369637 (for an explanation about the inconsistencies that will be generated.
    Steps are as below;
    Go to Transaction Code SE38
    Enter program name RMMMINIT
    Execute or press F8 function button
    Enter your company code (From and To)
    Enter relevant date: Say 01/03/2009 for Jan. 2009 month to be opened as of now
    That means, user can post for the month of Dec 2008 as well as Jan. 2009 .Refer SAP Note No. 487381 for more details.
    As per SAP Notes 487381 ( If the periods are opened in advance in mmpv to again change it to current period the following process should be follow ), Go to Tcode MMPI, then go to menu bar and select system -> user profile->owndata.In that screen , under the parameters tab enter MMPI_READ_NOTE in Parameter ID field and enter, then under short description you will get Initialise period. Next Save.
    Again go to MMPI enter company code, period and year and execute.
    Other way of doing ,it is follow these steps[But do not try these steps in Production system]:
    1. Use T.code: OX18, and delete the plants assigned to your CO.Cd and save.
    2. Use T.code:  OMSY and change the posting period to the one you want and save.
    3. Use T.code: OX18 and assign the plants you have deleted in step 1.and save.
    Regards,
    Biju K
    Edited by: Bijay Kumar Barik on Mar 15, 2009 12:07 PM

  • Basic difference between transaction code MMPV , MMRV, & MMPI.

    hi,
    what is the basic difference between transaction code MMPV , MMRV, & MMPI.
    i am using MMPV for new period opening and closing at begning of each month.
    Now, I have a problem, our company want to close december'2010 (period -09) for quartrly closing of books. how can i do that. there may be scenario that in later date i need to open period -09 for some stock adjustment. I spoke to one of MM consultant and he advice me not to use transaction MMRV in normal scenario, because it may cause inconsistencies in system and it will show difference in diff. reports. is it true?
    CAN ANY ONE LET ME KNOW THE WHAT STANDARD SAP SUGGEST IN THIS REGARD. WHETHER IT IS RECOMENDED TO CLOSE PERIOD 09?
    THANKS,
    RANJAN

    Hi,
    Initialize Period - MMPI RMMMINIT
    Close Period MMPV RMMMPERI
    MMPV is an activity where you have to close the prevoius period and you tell the system to allow posting in the current period.In MM we can work with two periods that presnt period ( month) and previous month .For example we have to open the JAN then for the given company we can close the DEC.In this way we can post our postiong in JAN month.
    If allow back posting tick is allowed then you can work with JAN and DEC.
    Period here is the fiscal year so if you are not comfortable with the Fisacl period then do use the current date for closing period .for example
    you want to clos DEC then put today date ( 01.12.2010) instead of giving the periods as different country has different fiscal periods.
    Initialize Period - MMPI RMMMINIT
    This is to insitailse the period for the company codes.this is not a regular activity.When you system is activted then you have m aintain Company Codes for Materials Management
    To create a material master record, the control record must exist for the company code for which you want to create your master record.
    To initialize company codes during productive operation, you have to use the period closing program.
    There is also one more trancation MMRV to allow the posting to previous period for a company code

  • Document number....posted in T Code F-53 is not popping after saving

    Hi,
    I am posting outgoing payment in new fiscal year 1.4.2014, in F-53. After saving the document, I am not getting the pop up message:
    "Document number .... posted in T Code F-53.
    But when I check the GL line item in FBL3N, the document number is visible there.
    Please advice what can be the reason.

    Hi,
    I didnt check with other users. But I am facing this issue. May I know how the Security guy can help me and how its related to my authorization, since until yesterday everything was working fine.
    Kindly advice, is there any link to the year end closing activity?

  • MSI Big Bang Xpower II did not post - Debug LED Code #67

        
    I need HELP...!
    I have a problem my board did not post , did not start and i have the DEBUG LED CODE # 67 displayed.
    There is my build
    MSI Big Bang Xpower II X79 LGA2011
    Intel Core i7 3820 LGA2011 Processor
    Corsair Cooling Hydro Series H100 CPU Cooler System LGA2011
    G.SKILL Ripjaws Z Series memory (F3-12800CL-32GBZL) DDR3 1600 PC3-12800 - CL10-10-10-30 (8192MB X 4) - 32GIG located in DIMM 1-3-5-7
    Gigabyte GTX570 OC Edition video card in slot PCI-E2
    Western Digital Velociraptor 300GB 2.5" SATA 3.0Gb/s 10,000 RPM
    LG BH12LS35 Blu-Ray Writer 12X BD-R 16X
    Ultra LSP-750 Power Supply
    Cooler Master HAF X EATX Tower Case
    When I put the power on, the power supply activated fans and drives spin, all the LEDs on the motherboard light up but nothing appears on the screen.
    No video signal at all and the computer stop and restrart every 15 seconds. When these reset occurs there is no beep on the speaker , nothing at all, no flashing screen either, nothing.
    The DEBUG LED display a sequence of flashing numbers 19 - 60 - 19- 60 - 67 and stop showing still the number # 67 for about ten seconds and then he reset again.
    I carefully followed the instruction manual for the installation, I installed the memory modules in slots 1 3 5 7, i put my video card in slot PCI-E2. all the power wire are connected correctly 1 x 24 pins ATX, 2 x 8 pins ATX, 1 X 6 pins , all the wire from the front panel are correctly connected to the m-connector in JFP1 & 2.
    Did i forget something, I don’t know what the debug led code # 67 exactly mean and what i have to do to fix-it
    Someone has an idea what is wrong or have any suggestion to solve this issue.
     Thank's all for your help.

     
    I followed some advice to remove the memory modules and this is actually caused by the use of memory but you will see I still have a curious bug.
    I referred to the instructions manual to the letter for the choice of DIMM SLOT to put the memory module in single, double, triple and quad channels.
    If I install 1 memory module in the DIMM SLOT  1 to operate in single channel, everything is normal and the motherboard  POST normally and show  the SETUP SCREEN.
    If I install 2 memory modules in  DIMM SLOT  1 & 3 to run in dual channel, everything is normal and the motherboard  POST normally and show  the SETUP SCREEN.
    If I install three memory modules in DIMM SLOT 1 - 3 - 5 to run in triple channel, everything is normal and the motherboard POST normally and show  the SETUP SCREEN.
    As soon as I install four DIMMs modules mémoiredans SLOT 1 - 3 - 5 - 7 to run in quad channel, the motherboard  freezes and does NOT POST and show  code 67 on the debug led and has reset itself every 20 seconds.
    I tried all my RAM modules alternately in both single channel and everything works normally.
    I did the same thing in rotation for both dual and triple channel and everything is still normal with all fourth memory modules individually.
     As soon as I put a fourth memory module it freezes and displays the code 67 or L9 dependent side as you look. 
    So my bug is my motherboard MSI Big Bang Xpower II do  not want  to work in quad channel.
    Do you have any idea where I should look for, is a setting in the BIOS  , I have flashed the bios to the latest version V1.5
    I included the screenshot of the BIOS to see if you can  notice something wrong. 
    Thank you

  • Field Profit Center is not populated while posting through T-Code F-02

    Dear Sir / Madam,
    While posting through T-code F-02 the field Profit center is in hidden mode
    as a result I am getting the given below error.
    "GLT2201 - Balancing field profit center in line item 001 not filled"
    Please guide me as to how do I change Field status varient so that the field Profit center gets activated in optional mode in F-02.
    I tried searching the same but could not find the solution.
    Regards
    Chirag Shah

    Dear expert
    Check following steps...
    1. Use transaction ACSET and enter cost center as your account assignment for type 01 APC posting..
    2. Make sure Cost Center exists in the Asset Master..
    3. Make sure profit center is entered into Cost Center master.
    4.Check the steps where you assign the GL accounts to the splitting rules.
    suggest you to go through the below mentioned links
    Balancing Field "Profit Center" in line item 001 not filled
    Balancing field "profit center" in line item 001 not filled
    GLT2201 - Balancing field profit center in line item 001 not filled
    Balancing field "Profit Center" in line item 001 not filled
    F-51: Balancing field "Profit Center" in line item 001 not filled
    Balancinf field profit center in line item 001 not filled
    Regards,
    Ajeesh.s

  • Wrong posting to asset in last fiscal year

    Hi Gurus
    Posting was done on the wrong asset number x instead of y in the last financial year.
    depreciaion is posted to the asset X for almost 11 months in the financial year 2011
    please specify the options available to transfer the whole acquisition amount and the depreciation amount(book and tax dep) that is booked to the wrong asset X to the asset y.
    the balance in asset number X after transferring will be 30K (NBV). these postings have happened prior to the year 2010
    the wrong posting occurred in last janaury (fiscal year april to Mar)
    thanks in advance
    regards
    sap student

    Do an ABUMN using a gross transfer and all the posted depreciation in the sending asset will be shown up as value adjustment in the receiving asset and in the next year, you see this value adjustment in the accumulated depreciation bucket.

  • Reversal of Depreciation posted already in a closed financial year

    Hi
    I met with a scenario , where in a financial year 2009 ( Apr to Mar) I acquired an asset on 01.04.2009. The whole year depreciation was run and posted. How to reverse the posted depreciation, a) for the entire year b) for a selected period.
    Thanks and Regards
    Jaswanth Kumar

    Hello,
    Reversal of depreciation is not possible. You could refer below post which would address the same:
    Re: Depreciation Reversal
    In the same link, you would able to find further links which would explain in depth.
    Regards,
    Jaymin R. Bhatt

  • Posting multiple tax codes for single line order in MIRO

    Hi all ,
    I have received a request from my business colleagues to investigate the possibility of posting multiple tax codes against a single line order in MIRO.
    This apparently can be a possibility for such things as training.
    I have searched a number of forums and tried and tested different ways in my develoment client but am unable to find a solution. admittedly I am no real expert in this area and would be gratefu;lt of any ideas / assistance  / etc..

    HI,  There is a possible solution for this scenario.
    1. Create 2 tax codes for VAT and SERVICE Tax at 12.5% and 12.36% respectively
    2. While posting the Invoice (TRX - FB60) following steps need to be followed.
    3. Amount has to be split into two line items
    4. Ist Line Item should have the Vat amount + 70000/- and select relevant tax code that was
        created for 12.5%
    5. Similarly 2nd Line Item should have Service Tax amount + 30000/- and select relevant tax code that    
        was created for 12.36%.
    Hope this would meet your requirement. If the solution is okay, kindly indicate the points.
    Regards
    K.Sanjai Babu

  • Need to download the data from BSEG based on company code and fiscal year

    Hi All,
              Please suggest me the solution to download the data from BSEG based on company code and fiscal year. As data in BSEG for the fiscal year2009  is 27 lakhs (= 2.7 million) for the specified company code.
    <removed>
    Thanks & Regards,
    Koti
    Edited by: Thomas Zloch on Mar 26, 2010 4:28 PM - please use English metrics only!

    May I ask what you mean by solution?  You can download from SE11, but where are you going to store 2.7 million rows and what tool are you going to use to store it?
    You probably need a (small) program that extracts what you want, then opens a dataset in an appropiate server-system folder, and transfers the data rows to the dataset as fixed-length or tab-delimited file.  It's been done many times, so suggest that you search.

  • Can someone post apple script code to tell Safari to refresh every 5 min?

    Can someone post apple script code to tell Safari to refresh every 5 min?
    thanx in advance!

    save the script as an application and checkmark the "Stay Open" box
    -- start script
    on idle
    tell application "Safari"
    activate
    set doc_url to URL of document 1
    open location doc_url
    end tell
    return 15 --<change the number 15 to the number of seconds you want between each refresh
    end idle
    -- end script
    <br>
    Mac OS X (10.4.7)

  • You cannot post to asset in company code 0001 fiscal year 2009

    Hello,
    I am receving subject mentioned  error when I am posting asset to fixed asset. Please advise me  to rectify the same. I tried AJRW but couldn't succeed.
    Regards,
    Prashant

    HI
    Is your company code - 0001? since generally it is standard SAP company code and system would give such error untill you will execute any of the asset report or transaction with your correct chart of dep and company code, like AS02, if you will try to display any of the asset with your company code , then next time it will allow you to do the transactions.
    Further if your company code is 0001 and error is related to your company code only , then please run AJAB for the year 2008 (since you want to post in 2009) in test run and in foreground, it will give you error log , if anything is preventing year close.
    Complete the tasks of the year 2008 and close it , open the new year 2009 by AJRW.
    Also check the FI period if you are acquiring assets from MM then also check MMPV, all should be open for your desired posting date.
    Cheers
    Mukta

  • You cannot post to asset in company code 1000 fiscal year 2011

    please help in this regard

    Hi,
    The Asset Master which you are using might be for the year 2010.
    So you need to take different Asset No or if you want to continue with same ask your FI guy for that Issue.
    He will activate it for year 2011.
    Regards,
    Rahul Patil.

  • 790FX-GD70 not POSTing no debug code all LEDs on

    Hi
    I have had my 790FX-GD70 for almost the past 2 years and it has given me no real problems. But yesterday whilst playing Fallen Earth, my computer froze so I gave it a restart and it froze during windows start up. At this point I opened my case and watched the debug display and this time it froze during post, can't remember the debug code it froze on. I tried restarting a few more time and it would freezes at different points during post. At this point I remove it from its case and start barebones testing it. If I left it for a time I could get into the bios and go to the hardware monitoring page and look a the tempter of the CPU for it froze. There it reported that the tempter was 34C. Stopped testing it last night and when I turned it one this morning it would not even start to post. When I turn it on all the LEDs on the board turn on even the overclocking LED and the overclocking switch also turns and to turn off the system I have to do a hard switch off and UPS.
    I have tried it with a different UPS with no effect, tried a different graphics card with no effect. Also tried with different RAM and no RAM no effect.
    Computer  secs:
    MB: MSi 790FX-GD70
    CPU: AMD Phenom 2 X4 955 Black Edition
    UPS: Antec TRUEPOWER Quattro 850 watt
    RAM: Corsair XMS3 4Gig DDR3 can not remember the speed.
    GPU: MSI AMD Radeon R6950 twin Frozr 2
    CPU Heat Sink: Cooler Mater Hyper N520
    Any help would be great.

    Quote from: Svet on 06-May-12, 02:30:14
    try with another video card then
    Also done that to no effect, currently I don't have a spare CPU that will work on my motherboard. I was hoping that some one has had this problem before because I have never seen my computer start up with all the LEDs on as it starts up. Also the hard drive LED is on constantly even when there is no hard drive plug in.

  • Control of duplicate invoice posting at T.Code FB70

    Dear Experts
    As per clients need to we need to control with error message when user trying post duplicate customer invoice at T.Code FB70.
    we request your help on how do we can meet this requirement.
    if any body know the relevant application areas for message control, pleas let me know. 
    I tried with application area F5, but it is not working for customer postings.
    Thanks in advance.
    Best regards,
    S. Habib Pasha.

    Hi,
    I used this validation for vendor invoice.
    $$1 is the document number, which is about to be generated after passing through this validation.
    So far as the check part is concerned, I used user exit form and coding in program ZRGGBR000, which is a copy of standard program RGGBR000. The coding is as follows-
    exits-name  = 'U300'.
      exits-param = c_exit_param_none.        "AP Duplicate Invoice Check.
      exits-title = text-104.                 "Posting check
      APPEND exits.
    FORM u300 USING b_result.
    *****Local Variables
      DATA:    l_bukrs   LIKE   bkpf-bukrs,  "Company Code
               l_belnr   LIKE   bkpf-belnr,  "Doucment Number
               l_gjahr   LIKE   bkpf-gjahr,  "Fiscal Year
               l_buzei   LIKE   bseg-buzei.  "Number of Line Item
      b_result  =   b_true.
      SELECT  bukrs
              belnr
              gjahr
         FROM bkpf
         INTO (l_bukrs, l_belnr, l_gjahr)
         WHERE bstat = bkpf-bstat
           AND xblnr = bkpf-xblnr
           AND stblg = ' '.
        IF sy-subrc = 0 .
          SELECT  buzei
             FROM bseg
             INTO l_buzei
             UP TO 1 ROWS
             WHERE belnr = l_belnr
               AND gjahr = l_gjahr
               AND bschl = '31'
               AND lifnr = bseg-lifnr.
            IF sy-subrc = 0.
              b_result =  b_false.
              bkpf-belnr = l_belnr.
            ENDIF.
          ENDSELECT.
        ENDIF.                            "closed for SY-SUBRC
      ENDSELECT.
    ENDFORM.                                                    " U300
    Regards
    K Khatri

Maybe you are looking for