Re: previous message/response to Shane from oc media

Shane & everyone else....
whoa!...yow!!!
some sort of voodoo entered the reply function on my side of
the system just now....gaaad!
the forum genie didn't want to lemme' post a simple reply!
some "jive" that ain't ever happened before...soooooooo
sorry folks!...still looking for help out of my quandry...
bjb
mac G-5 Mac OS X (10.3.7) final cut studio

Reinstall didn't help?
Did you update all the way?
Shane

Similar Messages

I have an Ipod Touch 4G, Although I have tried two connection leads to the computer, it comes up with the message ' Itunes could not connect to "Dads Ipod" because an invalid response was received from the device'. Using WinVista Homebasic. Please help?

I have an Ipod Touch 4G, Although I have tried two connection leads to the computer, it comes up with the message ' Itunes could not connect to "Dads Ipod" because an invalid response was received from the device'. I can access the contents of the device via the connection leads using 'My Computer' but not through Itunes as the message always appears!! Using WinVista Homebasic. Is this a known fault with the Ipod4 and VISTA? It works okay on a laptop, however, I would like an expert to take me through the steps to sort out my home desktop computer? Please help? Thanks in advance
I

Try this previous discussion:
https://discussions.apple.com/message/11240674#11240674

TS2755 I am trying to find a message from 2012 and when I load previous messages it only goes back so far then the program quits and sends me to the home ( main) screen. How can I find the message and get around this?

I am trying to access a message from early 2012. When I load previous messages It will only go back to oct 2012 and then the program stops and kicks my to the home page. Anyone know how I can get to the message? Thanks.

Try Spotlight Search
1. From any Home screen page of iPad, drag your finger down anywhere on the center of Home screen.
2. Spotlight search will now appear and you can search for apps, texts, or any other content you'd like just as you did on previous versions of iOS.

Error message "itunes could not connect to the ipad because an invalid response was received from the device".

Hi, I am having problems with itunes and my ipad........
I can use my ipad on my laptop but it will not connect to my main PC, I get the error message:
"itunes could not connect to the ipad because an invalid response was received from the device"
I have done all the Apple support ideas including re-installing itunes twice but no joy.
It used to work a week or so ago and no, I can't think of anything I have done which would have stopped it.
I have run msconfig and disabled everything but still no connection.
Anyone got any ideas?????

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
 Cheers, Tom
Did you get an error message number? See this similar post.
https://discussions.apple.com/message/24102115#24102115

HT4859 Think I set up my new iPhone in correctly and didn't get chance to set up from last Back Up of old iPhone - so didn't pull my Apps and previous messages across. Any way I can start again.

Think I set up my new iPhone in correctly and didn't get chance to set up from last Back Up of old iPhone - so didn't pull my Apps and previous messages across. Any way I can start again so everything comes across?

No

Move to previous message instead of more recent message?

I just switched from Thunderbird to Mail, and was wondering about the order in which you can read messages (after deleting one.) In Mail, I see that when I delete a message the viewer automatically takes me to the next--the most recent--message. Is there a way to change this so that it moves back to the previous message? I've tried changing the sort order to read old to new, and it still moves the viewer to the most recent message.
Thanks!

For me, it's been automatic. When I go into Messages to text someone who is enabled for iMessage, it sends the message as an iMessage, whether I want it to or not.
The first time my husband sent me an iMessage, it looked like it was sending it as a text, but after it sent, the bubble was blue (instead of green), and the text input bar said "iMessage" instead of "Text Message."
So from what I've seen, it just happens if the other person is set up for it. I think you'll probably have to turn off the iMessage feature altogether (which it looks like some other people have mentioned).

After installing the update I get this message on an app from facebook "502 Bad Gateway nginx" what is the issue and what do I need to do to solve the issue?

after installing the update I get this message on an app from facebook "502 Bad Gateway
nginx" what is the issue and what do I need to do to solve the issue?

Hi there, harleygirl.
A look around the internet and my previous knowledge indicates this is not an issue with firefox, but with how the server that the app is run on is incorrectly configured. To test this, please install an old version of firefox. You can download an older version from http://www.mozilla.org/en-US/firefox/all-older.html then try to visit the website again. Please let us know if it turns out that it works with version 3.6

Mapping problem in message response RFC -- xi -- JDBC

Hi all,
I'm using the follow scenario:
RFC <-> xi <-> JDBC
It's a synchronous interface.
In JDBC the message do a SELECT in database and returns selected rows in message response.
The message response transfers selected rows to RFC.response in the mapping.
It seems working right but no data are transfered to RFC.
In SXMB_MONI I can see the selected rows from database.
There is no error in JDBC and RFC adapter. Bellow is the message response in the SXMB_MONI:
<ns1:MT_jbdc_select_response xmlns:ns1="http://braskem.com.br/xi/sapxi03">
<t7_productionorder_response>
<row>
<PRODUCT>Nafta Media</PRODUCT>
</row>
<row>
<PRODUCT>Nafta Media</PRODUCT>
</row>
</t7_productionorder_response>
</ns1:MT_jbdc_select_response>
I think that there is an error in message mapping between RFC.response <-- message_response, because I'm just mapping the fields <row> and <product>, because if I make a link beteween <t7_productionorder_response> and return table of RFC, a Short DUMP happens.
Bellow the structure of MESSAGE RESPONSE:
   <t7_productionorder_response>
      <row>
         <PRODUCT/>
      </row>
   </t7_productionorder_response>
Bellow the structure of RFC RESPONSE:
<RFC.response>
<t_return>
     <item>
         <product/>
     </item>
</return>
</RFC.response>
When I make a link in the mapping between
<t7_productionorder_response> -> <t_return>
a short DUMP happens in RFC call in R/3.
Anyone could help me about this problem ?
Thanks in advance
Regis Ferrato

Hi,
<i>because if I make a link beteween <t7_productionorder_response> and return table of RFC, a Short DUMP happens.</i>
After doing this mapping, did you test it in the IR mapping editor? was it successful?
Do specify the occurence of all the headers so we can help you better.
Regards,
Smitha.

Itunes could not connect to the ipad because an invalid response was received from the device

Hello
I just installed the maximus v extreme motherboard with a ocz vertex 4 ssd with windows 7 x64. Installation was fine and installing drivers went without a hitch. Re-installing the software i use went fine as well.
However, when i went to use iTunes( v10.7) to sync my ipad i got an error message saying:
"Itunes could not connect to the ipad because an invalid response was received from the device"
I then connected my ipod nano to see if it will cause the same error, but it worked fine. So i tried an iphone and the same error I got for my ipad came up.
I tried reinstalling the usb drivers, but the same error came up. I also updated BIOS to the latest version, but the error still came up. I also reinstalled itunes numerous times and still got the error. I reinstalled and updated all drivers as well. Again this did not fix the issue. I also tried to run itunes in vista compatability and xp compatability mode. Again this did not fix the issue.
I have also followed all the steps apple recommends to do on their website with regards to this issue, again it did not fix the issue.
It is a real pain as everything else works like a dream! Is there anything i can do to get itunes to work properly on my pc?
Thank you for your help!
System specs:
asus rampage v extreme motherboard
OCZ vertex 4 SSD
8 Gb DDR3 RAM (1600 mHz)
windows7 x64
Intel i7 3.5Ghz 1155
nvidia GTX295 (x2 running in Sli)

I fixed this problem. Believe the problem is iOS 7 incompatibility with older iTunes Versions on older MacOS systems or platforms.
My iPad 2 would no longer sync with my old PowerPC Mac mini running MacOS. My iPhone 3GS synced fine. IPad2 updated to iOS 7 which doesn't run on my iPhone 3GS. Error message for iPad sync problem was "invalid response received from iPad" out of iTunes. I then applied update iOS 7.1.2 to iPad and error message changed to indicate this version of iTunes not supported, use 11.1.
iPad 2 used to sync prior to iOS 7 installation.
Research on Apple web site shows iOS 7 on iPhones and iPads does not support older MacOS and iTunes versions.
Upgraded with new Mac mini and iTunes 11.1 and MacOS 10.9.2. (put this off as long as I could. )
all good now.

IMAC Email - Moving to Next or Previous Message

I am a new iMAC and iPhone user, and am using Apple Mail on both devices.
On my iPhone, after I view 1 particular message, I have the option to hit an "UP" or "DOWN" arrow, to move to the NEXT or PREVIOUS email message to view. However on the iMAC, when I view a Mail Message in Full Screen mode, I can't seem to find a way to move to the NEXT or PREVIOUS email message, unless I close down the current message, and then open the next message. I can easily scroll thru multiple messages when using the "preview panel" to view the contents of a single email, below the list of items in my Inbox, however some longer emails are better read full-screen, but is there a way to move to the NEXT or PREVIOUS message when viewing full-screen.....If it is a good feature for the iPhone, then I would suspect it should be a good feature for the iMAC as well.
Does anyone know if this is possible and what keystroke or shortcut might allow this, if there isn't a button on the toolbar to support this?
Thanks,
grantmacuser61

With my large monitor, this is not a problem, but also having an iBook, I understand your question.
With my iBook, my method would be to look at the message in the message preview pane, and then double-click from the list to open it up in a separate window. In this fashion, F9 to invoke Expose, will let you toggle between both (or more) windows.
To transfer from the full screen view, click on Message in the Menubar, and choose Move To or Copy To from the resulting contextual menu, and then choose the target mailbox. Or toggle to the other mail window, select one or more messages in the message list, and control-click or right-click and choose Move To or Copy To and select the target mailbox. I find this much more useful (and less prone to mistakes) than drag and drop.
Ernie

I should have said in my previous message that the iphoto program I am using is for an ipad 2. I simply want to know how to delete an edited album which contains one photo that I do not want taking up space.

I should have said in my previous message that the iphoto program I am using is for an ipad 2. I simply want to know how to delete an edited album which contains one photo that I do not want taking up space.

OK....I'm stumped. The message you are seeing is typically there to protect someone from syncing with a different computer/iTunes account. Is there any way anyone else has used your iPad and possibly connected it to their computer?

Previous message

Is there a way to go to the next or previouse message when you OPEN a message? Entourage does this. with Mail it seems you cant do it from a open message? thx..:)

Mail doesn't have this feature, that's why you didn't get an answer before. There is an ongoing thread discussing a similar issue, but I believe that's not what you want, as the workaround implies using the Preview pane to read the messages:
key shortcut for next unread

Next message/previous message - how to? new user

I'm new to Macs. So far I like it.
When reading an email message, can I click forward or backward through the messages in that folder? I don't see this option/feature.
I see "delete", "junk", "reply", "reply all", "forward", "print". I'm looking for something like "next message" and "previous message", so I can just click forward and backward through the inbox.
Thanks
- Ryan

Hello Ryan.
You can use keyboard shortcuts to take pictures of the screen in Mac OS X.
To take a picture of the whole screen, press Command-Shift-3.
To take a picture of part of the screen, press Command-Shift-4, then drag to select the area you want in the picture.
To take a picture of a window, the menu bar, the Dock, or other area, press Command-Shift-4, then press the Space bar. Move the pointer over the area you want so that it's highlighted, then click. If you decide you want to drag to select the area, press the Space bar again.
If you press Command-Shift-4 and decide you don't want to take the screen shot, press the Escape key.
Screen shots are saved as files on the desktop. If you want to put the screen shot in the Clipboard, rather than create a file, hold down the Control key when you press the other keys. You can then paste the picture into a document.
You can use the Grab application to take a picture of all or part of your computer screen.
Open Grab (located in /Applications/Utilities) and choose a command from the Capture menu.
Selection takes a picture of a part of the screen that you select.
Window takes a picture of a window you select.
Screen takes a picture of the entire screen.
Timed Screen lets you start a timer and activate part of the screen (such as a menu), and then takes a picture of the screen.
Follow the onscreen instructions.
To see information about a screen shot you've taken, such as the size and depth, choose Edit > Inspector.
To save a screen shot, choose File > Save. Grab saves screen shots as files in TIFF format. You can use the Preview application to view these files and export them to other formats, such as JPEG.

Next message / previous message shortcuts?

On my Outlook account at work, I can move through my messages by opening one message, and then clicking the "next message / previous message" arrows on the taskbar. The new message opens directly in place of the previous one.
In Mail, I have to close one message, return to the Inbox and then open the next message. I've looked through these posts, and in the OS X Tiger Missing Manual and can't find a similar keystroke/button to navigate directly from the message window.
I hate to acknowledge that MS EVER has a simpler, more efficient way to do anything, but I may have to make an exception here! Anyone got a clue?
Powerbook G4 Mac OS X (10.4.4)

Hello Ryan.
You can use keyboard shortcuts to take pictures of the screen in Mac OS X.
To take a picture of the whole screen, press Command-Shift-3.
To take a picture of part of the screen, press Command-Shift-4, then drag to select the area you want in the picture.
To take a picture of a window, the menu bar, the Dock, or other area, press Command-Shift-4, then press the Space bar. Move the pointer over the area you want so that it's highlighted, then click. If you decide you want to drag to select the area, press the Space bar again.
If you press Command-Shift-4 and decide you don't want to take the screen shot, press the Escape key.
Screen shots are saved as files on the desktop. If you want to put the screen shot in the Clipboard, rather than create a file, hold down the Control key when you press the other keys. You can then paste the picture into a document.
You can use the Grab application to take a picture of all or part of your computer screen.
Open Grab (located in /Applications/Utilities) and choose a command from the Capture menu.
Selection takes a picture of a part of the screen that you select.
Window takes a picture of a window you select.
Screen takes a picture of the entire screen.
Timed Screen lets you start a timer and activate part of the screen (such as a menu), and then takes a picture of the screen.
Follow the onscreen instructions.
To see information about a screen shot you've taken, such as the size and depth, choose Edit > Inspector.
To save a screen shot, choose File > Save. Grab saves screen shots as files in TIFF format. You can use the Preview application to view these files and export them to other formats, such as JPEG.

How i fix the problem on windows 7 itunes could not connect to the iphone because an invalid response was received from the device

How i fix the problem on windows 7 itunes could not connect to the iphone because an invalid response was received from the device

take a look at https://discussions.apple.com/message/24243668#24243668. i had this problem and that solved it for me.

Re: previous message/response to Shane from oc media

Similar Messages

Maybe you are looking for