Re: Printing return address in Pages

When printing #10 envelopes in Pages, half of return address prints.  I must move the return address to .75" margin to print entire return address.  How can I get the return address to print completely without resetting the left margins?

Mike,
It's difficult to say from here. Which half prints, and where. Is it possible that your envelope isn't actually a No. 10 envelope?   4.12 by 9.5 inches?
Are you sure that you loaded your envelopes into the printer correctly? Does your printer really support printing on envelopes? Has this worked before, with other templates?
With about half of your return address missing and with 0.75" margin shift as a fix, it sounds to me like you have somehow reverted to 8.5" X 11" paper setting and loaded the envelopes broad side first, printing in Portrait mode. That would put your return address one inch too far to the left.
Jerry

Similar Messages

  • Is there any way to print return address labels?

    Is there any way to print return address labels in Pages?

    I use Avery Design Pro. It's free, supports all thier templates, and works under Lion.
    http://www.avery.com/avery/en_us/Templates-&-Software/Avery-DesignPro-for-Mac.ht m

  • How to print return address labels

    How do I print return address labels

    Hello madrinky,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Contacts: Print contact information
    http://support.apple.com/kb/PH11608
    Mailing labels:
    Click Layout and choose a label type from the Page pop-up menu. To set page margins and gutter space between labels, and how many labels to print per page, choose Define Custom. 
    Click Label and choose the address to print from the Addresses pop-up menu (for example, print a label for each contact’s home address). Use other Label options to specify the print order, include a company for business mailings or a country for international mailings, or add a graphic.
    Best of luck,
    Mario

  • Printing return address labels

    how do i print return address labels of the same address from address book? i can get it to print one, but i need a whole page of labels to use as return address stickers. Thanks for any tips you can offer.

    Use a word processor that has templates for Avery labels. Setup one page of labels with your address copied onto each label segment in the document. Save and print using your Avery blank label sheets.
    Note that Address Book is not the tool for this. AB is designed to allow you to print a return address on envelopes as you address them to selected entries from your AB or AB can print the addresses of your entries onto an Avery labels' sheet.
    A good word processor for the task is Word, but there are probably a number of other choices such as the word processor found in Open Office or NeoOffice (both freeware.)

  • Trying to print Return Address labels using Avery stock 5195

    Using a MacBook Pro - trying to print return address labels from my Contacts.  Where do I look for help?

    Maybe:
    http://www.podfeet.com/blog/tutorials-5/how-to-create-return-address-labelsl-usi ng-apple-contacts/

  • HT2584 HOW DO I PRINT RETURN ADDRESS LABELS FROM MY ADRESS BOOK?

    HOW DO I PRINT RETURN ADDRESS LABELS FROM MY ADRESS BOOK?

    Mail & Address Book Mac OS X v10.7 Lion
    pss: considereed bad form to use CAPS

  • Printing Return Address from Address Book

    I'm trying to print a return address label from Address book. It shows up but it's way to large. I would like the return address to be smaller than the Address. Is there a way to change the fonts?

    The only way I could find to do this is, from the Print dialog box, click on Layout, then in the Layout field, select Define Custom. Give your new layout a name, then under Sender, reduce the width and height size. I reduced mine to width = 40.00 and height = 20.00. Then it will constrain the size of the return address box to whatever size you set, sizing the font automatically to fit in that box. You can set the font size for the To address to whatever you want.

  • How do I print Avery address labels?

    Is there any easy way to print a page of return address labels using standard Avery sizes? Does not appear to be an option in Pages. I can do it in Word, but would rather not use it.
    TK Hayes

    I figured out a way to do this using Address Book without resorting to Word or Print Shop. What I did was select the contact I wanted to use to print return address labels -- the same address printed on a page of 30 Avery labels (8160) -- and drag it to the desktop. I selected the resulting vCard on my desktop, clicked the right mouse button (CTRL+mouse-click if you have a one-button mouse) to get the context menu, and selected "Duplicate." I duplicated this one vCard 28 times. I then imported the 29 vCards back into Address Book, but I chose "Keep Both" when the Duplicates warning asked me what I wanted to do. I made sure to check the box "apply to all." I then selected these 30 contact cards (all of the same contact), and selected "File / Print" from the menu bar. In the Address Book area of the print dialog, I selected "Mailing Labels" from the Style pull-down menu. Then I clicked on the Layout tab and selected Avery standard and 8160.
    In order to save myself the trouble of having to do all this over again, I selected Save to PDF from the PDF drop-down menu at the bottom left corner. That way, I can print out these return address labels any time. After all that, I deleted the extra 29 copies of the contact.
    I know this wasn't as easy as doing it in Word, but if you don't have Word and don't want to buy extra software, this is how to do it with a standard installation of Mac OS 10.5.

  • Printing #10 Envelope - Return Address "off the page" & Address Very High

    I'm having trouble printing a #10 envelope.
    I have an Okidata B410d printer that Pages seems to subtitle a "Generic PCL Laser Printer."
    I went -- File / Open From Template Chooser / Word Processing / Envelopes / Classic Envelope
    I fill in the fields and the page attributes shows my printer, #10 Envelope and a landscape orientation.
    But when I feed through the bypass tray -- following the little icons telling me face down, flap left, ... -- the result prints the address two lines from the top of the paper and no sign of the return address field (if it existed it would be an inch off the paper to the top if you follow.
    So I figure there might be some way to change the setup / margins / headers / ...
    I managed to get something sorta acceptable by changing the default header from 0.95 cm to 4.2 cm -- it wouldn't let me go any more. The result had the return field hugging the top of the paper and the main address starting maybe 1 1/2" from the top. the envelope looks funny by I had to get something in the mail today.
    Now I'd like to make this right.
    Any advice?
    Thanks

    Who knows what I've done but after much trial and error (and more than a few of those pages cut to match a #10 envelope I seem to have something I can work with.
    I guess, as you said, there is some funny business between my printer and Pages.
    I'll detail the steps as much so I can retrieve if necessary. What I did:
    * Found a template that used a floating text box for the return rather than a header.
    * Changed the page size from the #10 default of 24.13 cm wide x 10.48 cm high to 24.13 cm wide x 24.0 cm high to "fool" it to working.
    * Left side margins unchanged
    * Set top margin to 11.5 cm and bottom to 0.0 cm
    * Dragged the return address floating text box so it is centred top to bottom on the envelope (a look I like)
    * Finished output has return address flush left, centred top to bottom and the address filed aligned with top line of address and return address fileds the same.
    * Saved as a template in my templates.
    * Tested that I could retrieve the template, type in info and print okay.
    Like I said ... it ain't elegant but now I can print out a proper looking #10 through the bypass feed of my Oki printer.
    Thanks for your help.

  • HELP! Trying to print on an envelope (logo/return address), but when change page/paper size, prints blank page

    Before now, I have really only used Acrobat to convert and send uneditable documents (just to give you an idea that I am not used to trying to edit docs or print them out in paper sizes other than 8.5 x 11.  However, I have a document (created by a graphic designer) that was designed to be viewed as a sample, not really to be printed and now want to print it directly on an envelope.  I have created a custom paper size in the Print Setup menu and have also cropped the PDF page size to be similar (although not exact) to the envelope size.  When I try to print it, my printer prints out a blank page.
    Any thoughts?

    You need to select the paper size in the printer setup that corresponds to the letter size that you are using.  If you just crop to the approximately correct size you may find that the orientation of the page is wrong and various scaling options in the print dialog box can further confuse the issue.

  • How do I change the font and return address when mass printing envelops from contacts?

    I am trying to print envelopes for holiday cards from my contacts book. I want to change the return address name ( from Jane Doe to the Doe Family) in a nice font that is appropriate for the holiday season rather than the board room. It is certainly not in the print details menu.

    You can select to zoom the full page or only the text: View > Zoom > Zoom Text Only<br />
    Firefox 3 can remember the zoom level site specific.
    See:
    * http://kb.mozillazine.org/Zoom_text_of_web_pages
    * http://kb.mozillazine.org/browser.zoom.siteSpecific
    * http://kb.mozillazine.org/browser.zoom.full

  • Return address on envelopes not printing correctly on HP C4580

    I'm printing envelopes from a MAC 10.6.8 using Pages.  The software is pretty reliable.  The envelope size is 4 x 9.5.  I set the return address with my logo in it, set the margins, looks good on screen, but once printing begins I never know where the return address is going to be printed.  It does not print like it looks on the screen.  Sometimes it starts printing in the middle of the return address, other times it prints fine, sometimes just feeds the envelope and I can hear printing but nothing is printed on the envelope.  I've had this printer for several years and am very meticulous about loading and aligning the physical envelopes correctly.  It always prints the sending address correctly aligned.  It is frustrating.  Any ideas?  Thanks!

    Hello @Sc00ter ,  and welcome to the HP Forums, I hope you enjoy your experience!
    I see you're having issues printing envelopes.  I would like to help!
    Do you have the same issue printing envelopes from a different program?
    I'd recommend starting with a power reset.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would also recommend downloading and running the HP Print and Scan Doctor.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • How can I print my Avery return address labels (easy peel) template 5195 on my mac?

    How can I print my Avery return address labels (easy peel) template 5195 on my mac?  When I try to print them via avery website, they appear shunk on the page.

    What application are you trying to print from? Address Book has the ability to print using various label templates. I think you can do the same from Pages or Word.
    Best of luck.

  • Problems printing envelope from pdf file with logo & return address.

    I have the 6310 All-In-One Printer. I am experiencing major problems printing envelopes (standard size, #10) from a pdf file that is setup with a business logo, name , and address. First of all, the User Guide on page 63 directs you to load the envelope with the flaps up and on the left. This prints out return address in the lower right corner of the envelope front. I have insert the envelope opposite to the User Guide to get the information printed in the correct location, the upper left corner.
    Bigger problem - The logo, which is placed to the left of the business name and address will NOT print out. My preview printer window shows the logo, but it will not print. I cannot figure out what I am doing wrong.
    Suggestions???

    Kindly follow the steps here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01096354&tmp_task=useCategory&cc=au&dlc=en&lang...
    supported envelopes:
    Envelopes U.S. 10: 105 x 241 mm (4.125 x 9.5 inches)
    U.S. 9: 98 x 225 mm (3.9 x 8.9 inches)
    A2: 111 x 146 mm (4.4 x 5.8 inches)
    DL: 110 x 220 mm (4.3 x 8.7 inches)
    C6: 114 x 162 mm (4.5 x 6.4 inches)
    Although I am working on behalf of HP, I am speaking for myself and not for HP.
    Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
    If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
    Happy Troubleshooting : )

  • HP Photosmart 6510 gets a "Paper Mismatch" error trying to print on Avery return address labels

    I just bought the HP Photosmart 6510 yesterday.  I'm trying to print out return address labels to put on my daughters birthday party invitations, but the printer gives me a "Paper Mismatch" error.  This new printer replaced an HP PSC 1350 all-in-one, which printed these labels just fine.  I am using Pages on Mac OS 10.7 with the Avery 5195 template.  The labels are on standard US Letter (8.5" x 11") paper.  I'm really not sure what the problem is.
    Any help would be appreciated.  I have to get these printed out tomorrow!!!

    Hi barryofguilder I hope you are doing well and sorry to learn that you are having  this issue.
    Are you still experiencing this problem? If you are I will do my best to help you.
    Please read this Article  Click here. Let me know the out come  if you still need asssistance I will do my best to help you.  
    If you are not facing this issue any longer please take a little bit of you time and let me know it will be deeply appreciated.
    Best regards;
    RobertoR
    Remember ↓↓↓
    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Maybe you are looking for