Re:problem with employeer pension contribution wage type /3f4

hi,
One of the the employee not calculating employeer pension contribution wage /3f4 even though iam maintain the master data
in infotype 0587 for him we are maintain PENSION TRUST ID ,PENSION NUMBER and also pension contribution details also.
but iam checked his date birth is 1948 his age is almost 61 years but pf wages are calculating correctly /3f1 ee cont and/3f3 er cont please any body knows the reason for not calculating employeer pension contribution let me reply.
regards,
mgr

Hi
For an employee who has attained 58 years of age ,there will be no pension contribution calculated.
Here the age of the employee is 61,therefore there will be no pension contribution
Regards

Similar Messages

Problem in posting Er PF Wage Types generated through Retro

Hello all,
I am running India Payroll in ECC 6.0 with HR Package level 52.
We have revised wages for two employees in the month of June with effect from 13.04.2010.
Retro has run successfully for two months April & May and all the wage types are calculated and passed on for FI Posting correctly except Employer PF Wage Types.
I am getting error while posting wages to FI as Employer PF Contribution & Employer Pension Contribution generated for April & May are not considered for FI Posting. Only current month values are taken into account. Whereas I don't have any problem with Employee Contribution. /ZF5 is generated with total of past two months contribution and also passed on to FI.
What might be the problem with Er PF Wage Types /3F3 & /3F4?
We have not posted June salary till now due to above said posting error. Now July Payroll is also started.
Experts, please help me to sort out the issue.
Thanks in advance.
Regards,
Hema

Hi,
Thanks for quick reply.
The error is "Posting balance not cleared".
We have changed all the components including basic salary. Payroll program has taken PF Basis correctly and calculated PF amounts, both for Employee & Employer contribution correctly for individual months.
As I mentioned for all the three months Employee Contribution is considered for FI posting through regular wage type for current month and through /ZF5 for last two months.
But for Employer Contribution only June amount is considered for posting even though the correct amounts are shown for other two months in RT (three lines for /3F3 & /3F4 each).
Due to this, total amount for Balance Sheet Accounts is less where as Expense Accounts is shown higher as Employer Contribution is not considered for April & May, causing imbalance in Accounting entries.
GL Accounts are mapped correctly. Otherwise even the current month amount will not be carried to FI.
Hope my explanation is clear.
Thanks & Regards,
Hema

Problems with reference field in material type

Hi,
I have problem with field reference in material type creation.
When I define a self-defined field reference ZERS (copy of standard field reference HERS) for a own defined material type ZERS (copy of material type HERS), I get the following error message:
Field reference ZERS has not been set up
Message no. CZ127
Diagnosis
You have specified a field reference that has not been set up.
Procedure
Set up the new field reference or use an already existing field reference.
I do not understand why because the entry ZERS is present in table T130A.
Here is the IMG config I have made:
1. Logistics general->Material Master->Field selection->Maintain field selection for Data Screens (here I made copy of field reference HERS and named it ZERS)
2. Logistics general->Material Master->Basic Settings->Material types->Define attributes of Material types (here I made a copy of material type HERS and named it ZERS. I then tried to set the field T134-FLREF "Field reference" to ZERS, but then the error message appears)
Does anyone know what config I am missing?
Or any reason why the error message CZ127 is coming up?
Thanks

Must have been system error, I deleted all entries and did it all over again, it worked.

My phone is iphone 4 (GSM)-american type with IOS5.11 , i have problem with sim card failer (korek type)

my phone is iphone 4 (GSM)-american type with IOS5.011 , i have problem with sim card failer (korek type)

Sounds like your iPhone is locked to AT&T. Contact them to see
if you qualify for unlocking.
This link may provide some assistance:
unlocking AT&T iPhones (thanks to wjosten for the link)
http://www.att.com/esupport/article.jsp?sid=KB414532#fbid=Ont7guWFCdY

Employees Pension Contribution -EPF

Hi,
For one of the employee we have maintained Info Type 587 with the below conditions
Employees PF Contribution -   PF Basis
Employer's PF Contribution - PF Basis
Employer's Pension Contribution - Eligible Pay or PF Basis whichever is less
The Employee has joined newly in the current month, but when we run the Payroll, the following Deductions are happening in RT.
/111     EPF Basis     6,780.80
/3F1     Ee PF contribution     814- This is correct
/3F3     Er PF contribution     381-(supposed to be 3.67% of PF basis)
/3F4     Er Pension contribution     433-(supposed to be 8.33% of PF basis)
I could not understand on what basis /3F3 & /3F4 amount is getting calculated. Experts please provide your input.

The proration as mentioned by you happens only when the employee joined/left in the middle of the month. However, in case of LOP, PF is calculated on the earned basic (reduced) and eligible pay, whichever is less. Please check with your legal counsel for getting legal opinion on the matter.
However, if you still need to prorate the eligible pay based on LOP days, then write a rule which will check the value of /111 and limit it to eligible pay (prorated in case of LOP) before function INEPF is called in the schema. This way the value passed on to INEPF in WT /111 will be the prorated value and your requirement will be met.
But, I would still ask you to get legal opinion on the same as it may lead to statutory default in case the standard calculation is correct. It is always better and legally safe to deduct and contribute more PF.
From SAP India
In the case of mid month joining/leaving/absences or transfer
scenarios, the Pension/PF Basis will be correspondingly prorated and
so the contribution calculated will also be prorated. In case of LWP
the PF basis is not prorated.
If the pension basis is eligible pay which is maintained in T511P in theconstant PFBAS and currently having the value as 6500 then, in the case
of mid month joining 6500 gets prorated for the number of days employee was in the trust.
If the customer doesn't want this pension basis to be prorated then a
User Exit: Override Employer Pension Basis has been provided in payroll
function INEPF. The name of the exit is EXIT_HINCALC0_002. This exit is
in the enhancement HRINCEPF. We request you to go through the
documentation of this user exit at
Payroll India > Statutory Social Contribution > Provident Fund >
User Exit: Override Employer Pension Basis
Please keep in mind that above user exit is only for Pension not for
PF..
Edited by: Sikindar on Oct 9, 2009 2:14 PM

Problems with java constructor: "inconsistent data types" in SQL query

Hi,
I tried to define a type "point3d" with some member functions, implemented in java, in my database. Therefor I implemented a class Point3dj.java as you can see it below and loaded it with "loadjava -user ... -resolve -verbose Point3dj.java" into the database.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
package spatial.objects;
import java.sql.*;
public class Point3dj implements java.sql.SQLData {
public double x;
public double y;
public double z;
public void readSQL(SQLInput in, String type)
throws SQLException {
x = in.readDouble();
y = in.readDouble();
z = in.readDouble();
public void writeSQL(SQLOutput out)
throws SQLException {
out.writeDouble(x);
out.writeDouble(y);
out.writeDouble(z);
public String getSQLTypeName() throws SQLException {
return "Point3dj";
public Point3dj(double x, double y, double z)
this.x = x;
this.y = y;
this.z = z;
public static Point3dj create(double x, double y, double z)
return new Point3dj(x,y,z);
public double getNumber()
return Math.sqrt(this.x*this.x + this.y*this.y + this.z*this.z);
public static double getStaticNumber(double px, double py, double pz)
return Math.sqrt(px*px+py*py+pz*pz);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Additionally, I created the corresponding type in SQL by
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CREATE OR REPLACE TYPE point3dj AS OBJECT EXTERNAL NAME
'spatial.objects.Point3dj' LANGUAGE JAVA USING SQLDATA (
x FLOAT EXTERNAL NAME 'x',
y FLOAT EXTERNAL NAME 'y',
z FLOAT EXTERNAL NAME 'z',
MEMBER FUNCTION getNumber RETURN FLOAT
EXTERNAL NAME 'getNumber() return double',
STATIC FUNCTION getStaticNumber(xp FLOAT, yp FLOAT, zp FLOAT) RETURN FLOAT
EXTERNAL NAME 'getStaticNumber(double, double, double) return double')
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
After that I tried some SQL commands:
create table pointsj of point3dj;
insert into pointsj values (point3dj(2,1,1));
SELECT x, a.getnumber() FROM pointsj a;Now, the problem:
Everything works fine, if I delete the constructor
public Point3dj(double x, double y, double z)
this.x = x;
this.y = y;
this.z = z;
in the java class, or if I replace it with a constructor that has no input arguments.
But with this few code lines in the java file, I get an error when executing the SQL command
SELECT x, a.getnumber() FROM pointsj a;The Error is:
"ORA-00932: inconsistent data types: an IN argument at position 1 that is an instance of an Oracle type convertible to an instance of a user defined Java class expected, an Oracle type that could not be converted to a java class received"
I think, there are some problems with the input argument of the constructor, but why? I don't need the constructor in SQL, but it is used by a routine of another java class, so I can't just delete it.
Can anybody help me? I would be very glad about that since I already tried a lot and also search in forums and so on, but wasn't successful up to new.
Thanks!

Dear Avi,
This makes sense when it is a short code sample (and i think i've done that across various posts), but sometime this is too long to copy/paste, in these cases, i refer to the freely available code samples, as i did above on this forum; here is the quote.
Look at examples of VARRAY and Nested TABLES of scalar types in the code samples of my book (chapter 8) http://books.elsevier.com/us//digitalpress/us/subindex.asp?maintarget=companions/defaultindividual.asp&isbn=9781555583293&country=United+States&srccode=&ref=&subcode=&head=&pdf=&basiccode=&txtSearch=&SearchField=&operator=&order=&community=digitalpress
As you can see, i was not even asking people to buy the book, just telling them where to grab the code samples.
I appreciate your input on this and as always, your contribution to the forum, Kuassi

Problem with RGB Values for Canvas Type ‚Horizontal Toolbar' in Webforms 10

Hello,
I have a problem with the canvas type ‘Horizontal Toolbar’ in Webforms 10g.
When I try to set or change the RGB value of a ‘Horizontal Toolbar’ with the forms function
Set_Canvas_Property(‘my_horizontal_toolbar’, BACKGROUND_COLOR, rgb-value)
(at runtime) it has no effect in Webforms 10g for the canvas type ‘Horizontal Toolbar’ (the background color of the horizontal toolbar doesn’t change).
But it works fine for other canvas types like ‘Stacked’ or ‘Content’.
In Oracle 6i (Client / Server) this function works quiet well (even for the ‘Horizontal Toolbar’ canvas type).
The reason why we are using rgb values instead of visual attributes in this case is, that the color of the ‘Horizontal Toolbar’ should be customizeable (via a RGB Field) for our customers (at runtime).
Further more we are using the same technique for Text-Field-Items, Content- and Stacked-Canvases (and all works fine).
Maybe it has something to do with the pre-configured IAS color-schema (blaf).
But changing the color schema (e.g.: from 'blaf' to 'red') has no effect also.
Thanks for your help.

This is probably bug 777312. Call Support for the latest info on this bug and for help getting it fixed.

Problem with employee enqueue

Hi guys,
I have a problem with an ENQUEN_EMPRELE (enqueue employee)...
I make a BDC call, and after that a need to enqueue that employee because i need to make other actions in the employee... But a FM ENQUEUE_EMPRELE return that the employee is locked..
Is it a syncronism problem?
How can i solved it?
Thanks in advance,
LMS

Please check the spelling of your FM. You have spelled it three different ways in this thread. Do you mean ENQUEUE_EMPREL ?
If so, try specifying
_WAIT = 'X'
Rob
Edited by: Rob Burbank on Oct 13, 2009 12:09 PM

Problem with sorting involving user defined types and reports

Hello!
I have a problem with sorting involving Reports and user defined objet types.
I have created the following object types
CREATE TYPE type_balance_compte AS OBJECT
NUM_CPT_SEQ NUMBER(8)
,NUM_CPT VARCHAR2(35)
CREATE TYPE TB_type_balance_compte IS TABLE OF type_balance_compte
At the reports query I use:
SELECT ...
FROM table(cast(test_pkg.balance_comptes(:P_num_soc) as TB_type_balance_compte)) c
The procedure balance_comptes will retrieve data from various tables into the type.
The report is ordered by a certain string field that usually contains characters and numbers.
I need to have numbers always before characters, meaning the data should come in this order in the report for example:
0
1
A
B
So, before the report query, I have placed a call to DBMS_SESSION.SET_NLS( 'nls_sort', 'binary' ) to guarantee NLS_SORT in case it is originally set to FRENCH.
The problem here is that even after this call, I have the report ordered like this
A
B
0
1
And not the numbers before as it should be.
To try and find out where the problem was, I have created a table to use instead of the object type described above. In this case, it worked correctly. So all I know by now is that is has something to do with the type or cast, but what exactly? Does anybody now how to solve this without using a table?
Many thanks
Ariadne

I have placed a call to DBMS_SESSION.SET_NLS( 'nls_sort', 'binary' ) why not order directly then:
SQL> select *
      from table (sys.dbms_debug_vc2coll ('A', 1, '5', 'C', 'a'))
order by nlssort (column_value, 'NLS_SORT = binary')
COLUMN_VALUE
1
5
A
C
a
5 rows selected.?

Netbeans + MySQL + Tomcat (problem with: not a known entity type)

I try to create WebApplication with Stripes in netbeans, but I have problem with connect to DB.
I have this code:
EntityManagerFactory emf = Persistence.createEntityManagerFactory("jpaPU");
EntityManager em = emf.createEntityManager();
em.getTransaction().begin();
Person p = new Person();
p.setFirstName("name1");
p.setLastName("name2");
try
em.persist(p);
} catch(Exception e)
System.out.println(e.toString());
em.getTransaction().commit();
em.close();
emf.close();But in try{..} is em.persist(p); ant it prints into console this error: "java.lang.IllegalArgumentException: Object: db_entity.Person@13c7c35 is not a known entity type."
I do not know where is problem. Could you help me, please?
This is my persistence.xml:
<?xml version="1.0" encoding="UTF-8"?>
<persistence version="1.0" xmlns="http://java.sun.com/xml/ns/persistence" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_1_0.xsd">
<persistence-unit name="jpaPU" transaction-type="RESOURCE_LOCAL">
    <provider>oracle.toplink.essentials.PersistenceProvider</provider>
    <properties>
      <property name="toplink.jdbc.user" value="root"/>
      <property name="toplink.jdbc.password" value="adminadmin"/>
      <property name="toplink.jdbc.url" value="jdbc:mysql://localhost:3306/test"/>
      <property name="toplink.jdbc.driver" value="com.mysql.jdbc.Driver"/>
      <property name="toplink.ddl-generation" value="create-tables"/>
    </properties>
</persistence-unit>
</persistence>When I run my application I can see in console:
[TopLink Info]: 2008.11.15 09:01:13.265--ServerSession(4794542)--TopLink, version: Oracle TopLink Essentials - 2.0.1 (Build b09d-fcs (12/06/2007))
[TopLink Info]: 2008.11.15 09:01:13.578--ServerSession(4794542)--file:/D:/Workspace/NetBeansProjects/jpa/build/web/WEB-INF/classes/-jpaPU login successful..so, I hope persistence.xml is good
This is my class Person.java:
@Entity
public class Person implements Serializable {
    @Id
    @GeneratedValue
    private Long id;
    private String firstName;
    private String lastName;
    public void setId(Long id) { this.id = id; }
    public Long getId() { return id; }
    public String getFirstName() { return firstName; }
    public void setFirstName(String firstName) { this.firstName = firstName; }
    public String getLastName() { return lastName; }
    public void setLastName(String lastName) { this.lastName = lastName; }Please, help me.

I had the same "is not a known entity type" error when running under a development environment Eclipse/Tomcat using Toplink. But the almost same code and configuration worked when running under Eclipse as a stand-alone Java app.
Eventually I figured out (actually trial and error), that I had checked the toplink-essentials.jar libraries to be exported under: Eclipse Project/Java Build Path/Order and Export. I was messing around with libraries. Unchecking the export option there fixed the problem.
While its unlikely that this could have been your exact problem, I would check the library order and export configurations. Looking at other message boards about this problem, many seemed to have been caused or fixed by playing with their libraries.

Sap4rails - Problem with automatic handling of data types under Windows

Hello all,
I've been trying to develop my own application using sap4rails library but whenever I call one of standard RFCs I always get strange results. Here is the piece of the code from my model which gets data from CURRENCY_LIST table:
require "sap4rails"
class App < SAP4Rails
@@funcs = [
       'BAPI_CURRENCY_GETLIST',
# User defined instance methods here
attr_accessor :message
class << self
def getlist()
    RAILS_DEFAULT_LOGGER.info("[App]#getlist ")
    App.BAPI_CURRENCY_GETLIST.call()
    return App.BAPI_CURRENCY_GETLIST.currency_list.rows()
end
end
here is the code from the controller
class AppController < ApplicationController
layout "standard-layout"
def index
list
render_action 'list'
end
def list
    RAILS_DEFAULT_LOGGER.info("[LIST] action started...")
    @currencies = App.getlist()
end
end
end the code from the view:
<html>
<head>
    <title> Currencies </title>
</head>
<body>
    <h1>Listing Currencies</h1>
     <table border="1">
       <tr>
         <% @currencies.first.each_key {|key| %>
         <th><%= key %></th>
         <% } %>
       </tr>
       <% for currency in @currencies %>
       <tr>
         <% currency.each_value {|val| %>
         <td><%= val %></td>
         <% } %>
       </tr>
       <% end %>
     </table>
</body>
</html>
As you can see everything is just simple. I run my application on the Windows XP OS and always get such result:
<html>
<head>
   <title>Currencies and Exchange Rates: index</title>
</head>
<body>
   <html>
<head>
    <title> Currencies </title>
</head>
<body>
    <h1>Listing Currencies</h1>
     <table border="1">
       <tr>
         <th>VALID_TO</th>
         <th>ALT_CURR</th>
         <th>LONG_TEXT</th>
         <th>CURRENCY_ISO</th>
         <th>CURRENCY</th>
       </tr>
       <tr>
         <td>oran peseta     </td>
         <td>231And</td>
         <td>                                                                                </td>
         <td>099991</td>
         <td>ADP ADP02</td>
       </tr>
       <tr>
         <td>babwean Dollar </td>
         <td>231Zim</td>
         <td>                                                                                </td>
         <td>699991</td>
         <td>ZWD ZWD71</td>
       </tr>
</table>
</body>
</html>
It seems like there is sth wrong with mapping data types from R/3 to data types in Ruby. Does anyone has an idea what could be wrong? I would be very grateful for any help.
Best Regards
Michal M.

First can you please post all log file errors
>> I can't really give you a solution or specific recommendation since I did not saw this error yet myself, but on your own risk you can try:
1. You may try to just register 'dts.dll' using regsvr32.exe, but this error may indicate a bigger problem with setup.
If you are running SQL Server 64bit then try running this at the command prompt: %windir%\syswow64\regsvr32 "%ProgramFiles(x86)%\Microsoft SQL Server\90\dts\binn\dts.dll"
2. You can try reinstall from start (In this case you have to make sure that you un-install all)
[Personal Site] [Blog] [Facebook]

Problems with SQL server 2008 nvarchar type to varchar in oracle.

Hello
I did an Heterogeneous Connectivity between SQL server 2008 db and Oracle 11g, so far so good, but when i try to view colum data on RPD (only varchar type) i only see the first character of the string.
One more thing, when i try to see the data on Oracle SQL developer i get some strange characters, like when we have the wrong character encoding on our browser.
Some print to illustrate the problem.
Oracle SQL developer query:
http://postimg.org/image/5cvyqw6ih/
Microsoft SQL developer query :
http://postimg.org/image/skddx991f/
RPD printscreen :
http://postimg.org/image/aok2337cp/
SQLplus (as you can see the are spaces between the characters ) :
http://postimg.org/image/664xw1xjh/
To finish the data will be use to build an mobile app with oracle mobile app designer.
Thank you

The spaces you see between the characters when using the gateway indicate a wrong charset is being used.
1. Which gateway are you using - DG4MSQL or Dg4ODBC?
2. Could you please post the gateway init file and just in case it is DG4ODBC also the odbc.ini file
3. What's the character set of the Oracle database?
4. Looks like you're connected using Putty to a Unix box - what is the Putty NLS setting?
5. What is the NLS setting when starting SQL*Plus and what is the LOCALE setting?
6. Was a NLS_LANG parameter set when the gateway was started? Please change in your gateway init file the HS_FDS_TRACE_LEVEL to DEBUG, then run again the query and post it to a share.
=> There's a note that guides you step by step to configure the gateway and your env correctly - please have a look at:
NLS Guide for Generic Connectivity and Gateways (Doc ID 230239.1)
- Klaus

Problems with using a variable of type flash.filesystem.File

I need to parse a file with my flex app. I can import flash.filesystem.File with no problem but if I try to create a variable of that type, it does strange things at run time. If the variable is defined inside a function, it's as if that function no longer exists. The function doesn't get called and I can't step into it. If I define a File variable at global scope, the swf simply won't do anything at all.
I've added all the AIR libs to my project and don't know what else to try at this point. Any ideas?
This sample code shows the problem. If I comment out the File in initData, initData doesn't get called and I can't step into it. If I comment out the global File, then I get a blank swf.
<?xml version="1.0" encoding="utf-8"?>
<mx:Application
   xmlns:mx="http://www.adobe.com/2006/mxml" minWidth="955" minHeight="600"
   initialize="initData()">
    <mx:Script>
        <![CDATA[
            import flash.filesystem.File;
            //private var file:File;
            private function initData():void
                //var file:File;
                testLabel.text = "test";
        ]]>
    </mx:Script>
    <mx:TextArea y="200" id="testLabel" text="hello" />
</mx:Application>

sorry for my ignorance, I've only been using flex since 4.0
shouldn't you be using WindowedApplication rather than Application for an AIR app?
also there is no need to import File
below is my code that work's fine
<?xml version="1.0" encoding="utf-8"?>
<mx:WindowedApplication xmlns:mx="http://www.adobe.com/2006/mxml"
                              layout="absolute"
                              initialize="initData()">
     <mx:Script>
          <![CDATA[
               private var file:File;
               private function initData():void
                    var file:File;
                    testLabel.text = "test";
          ]]>
     </mx:Script>
     <mx:TextArea y="200" id="testLabel" text="hello" />
</mx:WindowedApplication>

Problem with "Employee Schedule" template

Help!
I'm trying to use the Employee Schedule template and add some new values to the popup of times. Although they appear just as times like "5:00 PM", they actually seem to be date-times (on 15 Jul 2008, which I guess is when the template was created).
If I add a new value like "11:00 PM" it's taken to be today's date so the hours calculation is way out. If I type in something like "15 Jul 2008 11:00PM" then the calculation works but I see the date as well as the time!
Is there any way of changing the formatting of a cell that's of type "Pop-Up Menu" to only show hours and minutes?
-Rolf

Rolf,
If you want to add new values, change them all so they will all have the same date. You'll need to do this for both starting and ending times so the math will come out properly. When you've made a new pair of Pop-ups, copy them and paste them to all the locations where you need them.
Regards,
Jerry

Problem with creation of IDOC Segment Type

Hi,
I tried to create IDOC Segment Type Z1LFA1 but error
prompted "Structure Z1LFA1 already exist.".
I tried deleting it at se11 but prompted
"You cannot edit object R3TR TABL Z1LFA1 with the
standard editor"
and at sm30-TADIR, but prompted
with "Cannot delete object directory entry, object exists."
How will go about this??
Please help!
Thanks!

hi,
yup, tried doing that on we31 but the segment does not exist yet.
we're currently upgrading from 4.6 to ecc, I think the structure
was tranferred to our ecc client but the idoc segment and idoc type were not. I'll just have to transport it then.
Thanks!

Re:problem with employeer pension contribution wage type /3f4

Similar Messages

Maybe you are looking for