Re: Problem with HP Officejet Pro 8500 printer: cleans printheads every time it's turned on

I own two of these printers and they both have been cleaning printheads every time it's turned on. My old HP officejet never had  these problems. 
The real problem is HP s   credibility . They promoted that these printers used half the ink as any other printer.  Even consumerreports showed 1/2  the cost per page.
As we all know that is pure BS  notwithstanding  the cleaning printheads issues.   
Maybe I will let Costco know that I and all owners are unhappy and see if they will refund. They still sell them . 
I will repost if I have any success.

If the printer is a year or couple yrs old, maybe the printheads need to be replaced? I once thought they would last forever, and that's really not the case with them, nor anything else really. Hope costco has some good news for you

Similar Messages

  • Problem with HP Officejet Pro 8500 printer: cleans printheads every time it's turned on

    Hello everybody,
    the printer HP Officejet Pro all-in-one 8500 (A909a - product n. CB022A) cleans printheads every time I turn it on. This problem affects any HP Officejet Pro 8500 printer, it isn't a problem only of that one I purchased. It is an annoying and irritating bug because the printheads cleaning at each power on implies two bad disadvantages:
    ink waste (each printheads cleaning process consumes some ink);
    too much time (2-3 minutes) to get the printer ready after power on.
    I upgraded my printer with the last firmware available on the HP site (firmware ver. DLM1FN1006BR) but the bug is still present.
    At this point I ask:
    there exists a way (or procedure) to disable this unnecessary automatic cleaning at every power on?
    Can someone contact HP engineers or tell me how contact directly one of them to indicate the bug and ask a new firmware update?
    Please don't tell me to leave the printer turned on all the time or that the printheads cleaning at every power on is a normal behavior! Where is then power and ink saving claimed for this printer model?
    I hope to receive a solution for this problem. Thanks in advance to everybody will help me!
    This question was solved.
    View Solution.

    The servicing when the printer is turned on is normal and is required to keep the printheads healthy (not clogged). See here for information.
    As for power savings, the printer will automatically go into a low power mode when not printing for some time.  It is not necessary to turn the product off and on to save power.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Problem with HP Officejet Pro 8500 printer: Ink is vanished without any prints due to cleanups.

    Hello everybody,
                                    The printer HP Officejet Pro all-in-one 8500A A910 cleans printheads every time I turn it on. printer was updated with the lastet driver but my yellow,cyan,magenta inks gets vansihed without taking any colour prints.I take only BLACK prints(less than 500) and do scans.
    This is worse printer i have ever used. It is using inks while clean up at startup or in between.Frustating thing is that It is using ink even during SCANS. Now, i really doubt the intellegence of designers of hp to such a big BUG.
    Please update the driver so that during startup it will ask for SCAN or Print OR Clean the printheads when first print is given and addition to optimise the cleanups.
    Hoping to get some solution form HP.

    Hi arr_8500,
    I understand you have an Officejet 8500 A910 that is running the clean printhead function each time you turn it on. I will do my best to assist you with this.
    The reason the printer keeps running the clean printhead function is self maintenance. The printer is detecting an issue, so it will continue to run the clean printhead function until it's not detecting an issue. I would suggest you follow through this Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems to help clean out any ink build up and things like that. I'd also recommend that you manually clean your printheads to remove any build up there as well. 
    Finally, it's best to have your printer plugged directly to a wall outlet. If it's not already in one, please move it.
    Hope this helps, have a great day!!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • HP OFFICEJET PRO 8500 PRINTER - new printhead installed - "checking device" won't shut off.

     My  magenta  cartridge was not printing. All I got  on the printed sheets was red ,yellow and pink colors. I  replaced the magenta cartridge and the same thing happened. I then replaced to  ccyan cartridge with the same results.  I searched the tutotials and installed a new magenta/cyan printhead. 
    Now the "checking device" message  won't go off. After about an hour I tried to turn the printer off and received the message that  the mechanical operations coud not be turned off.
    After another hour I just unplugged the printer.

    Hello kenishal,
    Welcome to the HP Support Forums!
    Sorry to hear that the Officejet Pro 8500 is not printing its colors correctly, usually this type of issue is resolved by replacing the printhead. Hopefully we can get the printer past "checking device" to see if it has resolved the problem.
    You can try removing and installing the printheads and the cartridges again, here is a walk through guide: 'Initializing' Displays on the All-in-One for Longer Than Expected During Setup.
    If that helps get the printer to finish "checking device" and you are still having the missing or incorrect color issue, take a look through this support page: Fixing Ink Streaks, Faded Prints, and Other Common Print Quality.
    Let me know if those suggestions have helped.
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Problems with hp officejet pro 8610 printing labels

    I have a new HP offficejet Pro 8610 less than 6 months old. I was printing address lables (Avery 8160) and everything seemed fine after the first group then when I started the second set they were out of alignment I readjusted the paper and tried again to print and I get a message that there is a problem with printer or the the paper is not the wrong size for the job and its the same paper so thats not it I tried shutting everything down and starting over and it allowed me to print one and it was perfect but when I tried to print another it went back to same message wrong paper size I am still using same size paper I am using Avery 8160 labels and that is the size on the avery website I am printing from. Any help is much appreciated thank you.

    Hello ,
    Welcome to the HP Support Forums!
    I would have to agree that the issue is within Microsoft Windows 7 regarding the printing issue with the Officejet L7780. Since the printer will print fine when using Ubuntu, it would appear there is an issue with the drivers and or software on Windows 7.
    Have you tried using the Print and Scan Dr? This will look into the drivers, software, etc on the computer and attempt to resolve on its own. Let me know what the results are when you run it.
    You could try the steps in this HP guide: Installing an Alternate Print Driver in Windows 7 for a USB Cable Connection. The L7780 does not display in the document but it will work with the Deskjet 9800 driver.
    I hope this helps,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Webscan problem with HP Officejet Pro 8600 printer and OS Mavericks

    I have an iMac with OS 10.9 Mavericks installed and an HP Officejet Pro 8600 Plus N911g printer.  I recently downloaded the "HP-Inkjet-SW-OSX-Mavericks_v12.34.37" software update from the HP website but, since installing it, the image preview feature on Webscan now only shows a black screen and I cannot download the scanned image.  I have uninstalled the update and reinstalled the old software  - "Officejet-Pro-8600_v12.23.0" but the problem persists.
    I am not sure if this is an HP problem or a Mavericks bug.  Any advice/help would be greatly appreciated

    The servicing when the printer is turned on is normal and is required to keep the printheads healthy (not clogged). See here for information.
    As for power savings, the printer will automatically go into a low power mode when not printing for some time.  It is not necessary to turn the product off and on to save power.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HP Pavilion dm4-1160us not interfacin​g with HP Officejet Pro 8500 A e All-in-One Printer A910a

    HP Pavilion dm4-1160 us Entertainment Notebook stoped pring with HP Officejet Pro 8500 A e All-in-One Printer A910a
    Operating System is Microsoft Windows 7 Home Premium (64bit) Service Pack 1
    How do I get the printer working again?

    Hello white2012.
    It would help knowing how the printer is connected to the computer (USB, Ethernet cable, Wifi).
    Is there any error message shown in the computer or in the printer?
    Cheers!
    Wixma.
    I am an HP employee.
    Say thanks by clicking the Kudos star in the post.
    If my reply resolved your problem, please mark it as as Accepted Solution so that it can be found easier by other people.

  • I have a HP Officejet Pro 8500 A909a connected to a Time capsule. My iPad 2 don't recognise the printer. Why?

    I have a HP Officejet Pro 8500 A909a connected to a Time capsule. My iPad 2 don't recognise the printer. Why?

    The pad will print to any airprint compatible printer.  Hp makes several, but i do not see yous on the list.
    Here is the list
    http://support.apple.com/kb/HT4356
    You can download the hp eprint app from the app store and see if that works for you.

  • I'm having problems with iPhoto and the facebook set-up.  Every time I attempt to do so it says an error has occured and try again later.  I have not seen a solution posted.  Therefore, how does one contact Apple to solve the problem?  I'm new to the worl

    I'm having problems with iPhoto and the facebook set-up.  Every time I attempt to do so it says an error has occured and try again later.  I have not seen a solution posted.  Therefore, how does one contact Apple to solve the problem?  I'm new to the world of iMac but I find it a bit frustrating trying to solve basic issues/problems:(

    For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices. 
    That all works.
    It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now.  They are all synced, and all was working just fine.
    I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
    Thanks for listening,
    Melissa

  • Printing with HP Officejet Pro 8500 A909n Series Printer & Apple Air Print

    I am trying to use my IPad and print from it through Air Print.
    Has anyone had any success in printing from an IPad, using the latest Apple IPad operating system (iOS 4.2) to an  HP Officejet Pro 8500 A909n Series Printer?
    The documentation from Apple indicates compatibility with:
    HP Officejet Pro 8500A e-AiO HP Officejet Pro 8500A Plus e-AiO HP Officejet Pro 8500A Premium e-AiO
    Will  the 8500 A909n work?
    Thanks.

    Hi,
    Airprint is not supported for HP Officejet Pro 8500 A909m Series.
    Thank you.
    I am an HP employee
    **** Please mark the post that solves your problem as "Accepted Solution" ****

  • Trouble Printing with HP Officejet Pro 8500

    Hello - I recently changed my laptop and have a Windows 7.  I went online and downloaded the software and am able to do a test print page with the Print Doctor.  However, when i print from my laptop and select the correct printer, it doesn't do anything or respond with printing.  I was able to install and have it work with my old laptop, i just can't seem to work it on this one.
    Thank You

    Hi @Vanessasood,
    Thank you for visiting the HP Support Forums!  I understand you are having trouble printing to your HP Officejet Pro 8500 with your computer running the Windows 7 Operating system. I would love to get you up and running but require a little more information:
    1. What is the Exact model of HP OJ 8500 you are using as there a few in the series?
    2. Did you recently upgrade to Windows 7?
    3. How is the printer connected, USB or Wireless?
    4. Do you get any error message when you attempt to print?
    Click here to download and run the Print and Scan Doctor > www.hp.com/go/tools- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
    Please let me know what the PSDR finds, I will watch for your reply.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • HT3669 HP Officejet Pro 8500 Print to Fax with Mountin Lion

    Does anyone know how to install the Fax Printer for an HP Officejet Pro 8500 to work with Mountain Lion? HP website says it's in Mountain Lion. Apple Support says its not, but it is a known problem and that HP has the fix. HP Yech Support reads tje website to you, then tells you to delete all the printer on your system and sart over. Standard HP.

    NoMan99 wrote:
    Don't know anyhting about A909a, but it doesn't work for A909g series.
    That same article mentions there is also a Fax driver available for the A909g and A909n.
    NoMan99 wrote:
    If you delete the FAX oru=inter then try to add it to force a new driver selection, there is no Fax printer that appears for the HP Office Jet 8500 -- only the Printer.
    Never had a HP, but with my Canon device that supports Faxing from OS X, you see multiple entries in the Default view of the Add printer window. One for printing, one for scanning and one for faxing. When you select the entry showing Fax in the Kind column, the supporting fax driver is selected.

  • HP Officejet Pro 8500 prints slow with Lion.  One page every 1.5 to 2 min.  Apple support offered no help and HP unable to help. Any suggestions?

    HP Officejet Pro 8500 Wireless prints slow with lion. One page every 1.5 to 2 min.  Apple support and HP no help.  Any suggestions?

    Although printer is wireless capable I have it connected directly to iMac via USB to help with speed.  I just completed resetting printer and reinstalling to no avail, still approx 2 min to print one page.

  • How do i print address returns on envelopes with hp officejet pro 8500

    how do i print address returns on envelopes with hp officejet pro 8500

    This is done with your software that you have to print the envelopes.   MS Word can do this, just use their help facility.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • Iphone e print/air print issues with HP Officejet Pro 8500 Premier All-in-One A909n

    I downloaded the 4.2 upgrade for iphone thinking I would be able to print from my HP Officejet Pro 8500 Premier All-In-One A909n.  I have upgraded the HP firmware.  I have turned my printer on and off.  I get an error message that says "No printer found."  I am not able to contact HP due to my warranty being expired--even though I bought the extended warranty from the store.  Please help.  Thanks!

    This printer is listed here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01619067&lc=en&dlc=en&cc=us&product=3857218#N46...
    has offering eprint.  However, some community messages say that it does not work.
    I have not been able to get an email address set up for the printer, or to figure out whether or not it is web services enabled.  
    It does not have the icon on the touch screen that is shown in the hp instructions.
    Any clues out there?

Maybe you are looking for

  • My iphone 5 was stolen from me if they've reset the device fully will I still be able to find it with the imei number or the sim cards wifi

    I'm just soo annoyed that someone stole from me and if they've restored the device will i be able to ring up the company (vodaphone) or apple to get them to track my IMEI on the phone because they're bound to connect to wifi at some point weither its

  • Multi-Master replica busy

    I have a multi-master ldap server(5.1 service pack 2, build number:2003.028.2338). There are about 56k users in 1st server and 45k on the 2nd server when count the users in the 2 servers. Plus, I have a pure consumer which is working fine with the re

  • How to do "DDL rollback"

    I have script, that contains several DDL-statements. For example script removes FK-constraint from a column, then it renames the column, then it puts new data to the column, then it puts new FK-constraint to the column, also some other ALTER-statemen

  • Duplicate layer dialog box

    in config. i want to have a DUPLICATE LAYER button just immediately create a duplicate layer, so its a oneclick process, but instead it pops up a dialog box for me to name the new layer, which i dont want to do, and it makes config. not be more effic

  • OIM Clustering with JBoss

    Hi Guys I am trying to do clustering of OIM server. I am running two instances of OIM server on JBoss. I am able to login into the OIM system but getting this below exception continuously on both nodes: 17:38:29,451 WARN [TCP] discarded message from