Re Problem with Log & Transfer
When capturing using log & transfer,the media shows in transfer window but after adding it to queue it then shows in status button as no data? Can anybody help.
I have an imac 2ghz intel core duo memory 1gb using snow leopard 10.6 & quicktime 10.6 I have just installed a 2nd external hard drive seagate free agent goflex My camera is Sony HDR-XR105 AVCHD. I have been able to upload in the past ok but the problem has only occured since installing the extra drive .Connected by USB.
Similar Messages
-
Problems with data transfer to CEN via SAPCCM4X agent
Hello!
We are facing with the the following problem with data transfer since we installed SAPCCM4X agent:
- new alerts can only be seen within alert history
- old alerts cannot be deleted
We checked the agents via RZ21 and also the appropriate log files do not get further information.
When we stop the SACCM4X agents and the monitoring data is representing via RFC connection everything is ok.
Can some one help to solve this problem?
Thank you!As Woodmeister50 told, direct connect between two iMacs via Ethernet cable is much faster than via adaptor, I suppose.
OS X: How to migrate data from another Mac using Mountain Lion and earlier
OS X: How to migrate data from another Mac using Mavericks -
Problem with logging in to BW after installation finished
Hi all,
I've a problem with logging in to my BW after i've finished installing it.
First, i'd add that my system is a standalone server. the GUI and the Froentend are already installed on the server. I'm trying to login the BW from the server.
After i'm starting my BW server from the R3 Management Console I'm trying to login my system and i get dump even before i'm getting the Log-In screen of SAP BW.
the dump i'm getting is "DBIF_RSQL_INVALID_REQUEST".
I've no idea what to do, i am stuck in that situation for 1 week, couldn't find any information about it. I've tried to read logs and couldn't find something specific.
Someone suggested it's a connection problem, but couldn't help more than that.
Any help or suggestion is mostly welcomed,
Thank you all in advance,
Yoav.Hi again,
I've increased the virtual memeory, but it didn't help. Doesn't seem to be memory or space problem but more like a connection problem (to the SQL server - which is located at same computer where i'm tryinf to run the BW).
And to your answer: I'm using SAP Gui 6.4
Any more suggestions?
Thank you,
Yoav. -
Help intermittent problem with logging in
Help i have intermittent problem with logging in, sometimes it just comes up with the desktop without any icons or dock and i have to restart the server so i can log on properly, but it doesn't happen all the time, any ideas would be appreciated???
The clients login window just shakes and won't login. I did find one thing that helps some of my Mac Lab woes.
Some students get a dock that only has 3 icons. These students also will have saving and printing problems when they get this default dock.
I think some of the problems occur when the student gets over quota, some preference files get corrupted.
1. Student will login.
2. Open the student's home folder. Then open Library and Preferences.
3. Find the file com.apple.homesync.plist and delete it.
4. Empty Safari Cache and the user's Trash Can and make sure they are not over quota.
5. Logout and login.
This will fix some problems, but not the problem when students can't login at all. -
Hi, I have a problem with logging into PSN. When I want to log into in there comes an error which is NW-31456-9. I have something like that for 1 day. Anyone know how to fix this? I tried manual settings for my internet but it doesn't work.
Did some more debugging. The application is an application running under the Glassfish 2.1.1 application server. The logger is configured in a Lifecycle module and accessed in an EJB module. Here is what I found.
With JDK 1.6.0_05, the logger that I get in the Lifecycle module is the same logger instance that I get within the EJB where I am logging. In the EJB, I get all of the handlers and print out the information and all is correct and the logging works with the handler.
Change the symbolic link to point to JDK 1.6.0_22 and the logger that I get in the Lifecycle module is not the same logger instance that I get within the EJB where I am logging. This time in the EJB, the logger's level is "null" and there is no handler associated with the logger. So that is why it is not logging. What I don't understand is why the logger instance is retrieved in the EJB is not the same logger instance in the Lifecycle module.
Any ideas will be greatly appreciated. -
I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.
Hi,
Regarding the issue here, please take a look at the below links to see if they could help:
Slow data transfer speed in Windows 7 or in Windows Server 2008 R2
And a blog here:
Windows Server 2012 slow network/SMB/CIFS problem
Hope this may help
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Problem with logging in to apex application builder listener
I have problem with my settings and am posting this in hope that someone else out there had similar problem and solved it!
I am trying to use reverseproxy to access to our db through apex listener.
It's been all set-up and I can login to the application it self either through proxy or no proxy using the listener.
But when I try to login to apex application builder I cannot do it through proxy(with no proxy, it works).
It just refreshes the login page when I click login....
I tried to upgrade the listener to the latest v1.1(using 1.0.2) but it causes my tomcat to crash...
So solution i am looking for is how to make logging in work through proxy..
In the firebug it is showing that below and few other request status as 302 moved temporariry
http://myserver:8080/testsin/apex/wwv_flow.accept
Where as with no proxy it is saying Found.....
Any thoughts??
Thanks
Sin KHello Sin K,
so proxy and Tomcat are located on different machines as well? Is the proxy able to commuicate with the Tomcat on the configured internal ports and is the proxy able to lookup the hostname you configured for the Tomcat?
For the connector, the proxyName and proxyPort should be the parameters the client uses to call APEX. So if your clients should call via http://proxyserver:8080/testsin/apex the settings would be
proxyName=proxyserver
proxyPort=8080Reason for this is that applications (e.g. the APEX Listener) generate there URL references with these parameters.
But does your proxy actually serve on port 8080? And is that port accessible by clients? Do clients accept cookies from that server?
In my case, there is only one 302 which redirects to http://host:port/apex/f?p=4500:1000:sessionid which is correct.
If you look into your first post request in firebug, what's in the request header?
-Udo -
Problem with logging in Creative Cloud account
Hi, I have a problem with my Creative Cloud account. It seems like I logged out about a week ago and when I tried to log in again just now I didn't succed as the program said I have logged out of the system. My password is correct, I even changed it, it still does not work. I can log in on the internet though and my subscribtion is paid, I have no idea what to do. Please. Help.
Sign Out When Sign In http://forums.adobe.com/thread/1450581?tstart=0 may help
-and http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html
-and 'looping' https://forums.adobe.com/thread/1504792 -
Problem with file transfer via wi-fi!
Hi, folks,
Please, could someone help me to get a music file I made using Groovemaker app?
After finish the mix, I built a song. Then, I saved it in the "mix browser".
In the end of the exporting process, I typed the URL address displayed in the browser (http://192.168.0.188:5555/, on Firefox, Chrome and IE), but something gone wrong and, every time I export the same song - it's my first exporting action - I got a message such "The page hasn't loaded... limit time reached".
What's the problem with my wi-fi connection? Should I set something in my router? According to the company website (http://www.groovemaker.com/gmiphone/features/) this kind of wi-fi file transfer is easy, but not to me...
Thanks in advance!
AlexWhat type of errors is being generated? Are you trying to save that file on device memory or media card? try moving that file on media card.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit -
Hello!
I have problems with clearing logs via transaction DB13.
When I start this operation for the first time after starting SAP system this job is finished successfully.
But then I have error in this job:
Job started
Step 001 started (program RSDBAJOB, variant &0000000000033, user ID SAP*)
Format "X_PAPER" not defined for printer "$LOCL"
Execute logical command BRCONNECT On host SAP-TSC
Parameters: -u / -jid CLNUP20140505004009 -c -f cleanup
External communication error at program start (see system log)
SAPXPG_START_XPG_LONG: sy-subrc ne 0
destination = %_TCPIP_%1
SXPG_STEP_COMMAND_START: SXPG_STEP_XPG_START returned: 1.006
SXPG_COMMAND_EXECUTE(LONG)
<timestamp> = 20140505004031
COMMANDNAME = BRCONNECT
ADDITIONAL_PARAMETERS = -u / -jid CLNUP20140505004009 -c -f cleanup
LONG_PARAMS
OPERATINGSYSTEM = ANYOS
TARGETSYSTEM = SAP-TSC
DESTINATION
SY-SUBRC = 902
SXPG_COMMAND_EXECUTE failed for BRCONNECT - Reason: x_error
Job cancelled after system exception ERROR_MESSAGE
And i have to restart the SAP for using DB13.
Why it's happening?
P.s. Yes, i changed SAPSR3 passwords via brtools and brconnect.
Thank you for answering.Hello Janos,
I checked SAPDBHOST parameter in DEFAULT.PFL:
SAPDBHOST = SAP-TSC
BRCONNECT is located in the directory with appropriate user rights.
Also I checked developer traces:dev_rd
LOCATION SAP-Gateway on host SAP-TSC / sapgw00
* ERROR timeout during allocate
* TIME Wen May 07 16:08:10 2014
* RELEASE 720
* COMPONENT SAP-Gateway
* VERSION 2
* RC 242
* MODULE gwr3cpic.c
* LINE 6070
* DETAIL no connect of TP sapxpg from host SAP-TSC.localdomain after 20
* sec
* COUNTER 11
But i can't understand why rebooting sap system the first clearing logs finish successfully, but then i have errors. -
Automatic message for problems with partner transfer
Hello gurus,
every 15 Minutes we automatically transfer new or changed partners from SAP ERP to GTS.
Now, if there is an error in one of those partners and they cannot be transferred successfully (e.g. because of missing or inconsistent address data), SAP retries to create/change that partner every 15 minutes.
Unfortunately, I cannot check the transfer logs five times a day for any errors that might occur.
Because of that, it sometimes takes several days until I come to discover the error. Until then, many, many transfer logs have been created, most of them containing only one entry. Furthermore, the particular partner cannot be used in SAP ERP until the error is resolved, because it is blocked by GTS.
Is there any way to create a message to me (via mail or in SAP), if there is an error with partner transfer?
Thank you
AliciaAn alternate option would be to create a custom program that would read the unprocessed change pointers in ECC ( these would correspond to the customer's that have not made it successfully to GTS) and run this program soon after your transfer program completes...
This will give you a list of customers not transferred to GTS..
Thanks
Jasmit -
on my laptop I have a problem to log in, from the start
fisrt massage is about connection to the iTunes - I ahve the latest version
and the other masseg is that the center is not avialable and cannot make connection?
does anyone have an answer for this problem?
thank you in advancethis is the first massage
One Moment Please.
Connecting to the iTunes Store.
Loading
If iTunes doesn't open, click the iTunes application icon in your Dock or Windows Task Bar. To download iTunes, please click here. -
Graphics Problems with Log in screen and iPhoto
I have been having some problems with my brand new MacBook Pro. The graphic card seems to be going broken sometimes and it seems to be happening more often.
MacBook Pro 1
First I bought a new mac to replace my old one, i restored it from a Time Machine back up. When my MacBook Pro went to sleep the screen turns black and you click and the screen blocks up and more of the screen unblocks as you move the mouse, I never experience this problem with my old MBP. So I took it back to the shop where they gave me a brand new one, they said it was clearly a graphics problem.
MacBook Pro 2
I installed the time machine back up straight away and I experience the same problem again and a few days later a iPhoto problem happens again lots of times. Examples of what happens are in the video pasted below.
Link - http://dl.dropbox.com/u/32131902/Mac%20Problems.m4v
Does Anyone Know The Problem?MacBook Pro 2 is the replacement they gave me
-
Problem with Log and transfer using AVCHD
Hello,
I was wondering if I can get help. I use a Canon Vixia HF S200 and FCP Version 6.0.6
I have produced projects on my MacBook Pro 2.33 Ghz Intel Core 2 using this process before with no problems in the past. This problem just started and I dont know what has changed. When I open the Log and Transfer (LT) window I can see and hear all my video from the AVCHD folder in my harddrive just fine, I can scrub with no prob.... But when I add clip to Queue I get an red circle with exclamation on my status.
I have changed the settings on the preferences to Apple intermediate Codec and the audio to plain stereo.. no luck there, the video still will not transfer to my bin.
I have made sure that the toggle Queue state was the little arrow instead of the paused icon...no luck there either... i got a message that says clip queued transferring but nothing is happening.
I will appreciate your help!
Also I didn't mean to tread jack earlier, please accept my apologies, if anybody saw that...OK!!!!! This seriously cost me 1 day of my life that I'll never get back!!! lol
So I was able to bring the footage in on to Imovie...Yes, I was that desperate...deadlines do that!
Edited the entire project there...kinda sucked...
Then I had the bright idea that if I was able to bring the videos in to Imovie, on my local HD...than something may be wrong with my scratch disk that I use on FC...its a USB disk, specs =slow.
So I changed the scratch disk and yes "Davi S" for good measure I also deleted the Pref files.
So it working again...here I go editing on FC after I edited the entire project on Imovie...
Thanks for all your help! -
We've been running iTunes U for public and private content for several years.
Just in the last day or so, when we log in with our local credentials, a blank page pops up.
The person who set up the transfer script said something changed on Apple's end. Does anyone know if there was a change or is also having a problem?
Marilyn
Ithaca College.We are not seeing an issue accessing the Ithaca College site via transfer script on our end. In most cases, when a transfer script that had previously worked suddenly stops working, the time stamp for the credentials is outside of the 90 second window we are expecting. We would recommend appending the debug suffix to the credential to test the credential.
Relevant topic in iTunes U Adminsitration Guide - Debugging Site Access and Integration:
http://deimos.apple.com/rsrc/doc//iTunesUAdministrationGuide/DebuggingSiteAccess andIntegration/chapter_19_section_1.html#//apple_ref/doc/uid/AdminGuide-CH21-SW1
-Thanks
Maybe you are looking for
-
What is the deal with the latest release of iTunes?
Ever since I updated iTunes a few months ago it has basically made itself totally useless. It takes forever to start the program up - it takes minutes and mintues of spinning rainbows to search for music in my library that before was instantly recal
-
Use mouse movement to create parallax
How would I create a little parallax between layers using the mouse movement rather than the scroll bar? Just trying to create the sense that there is some depth on the page,not massive movement. Sorry don't have an example to show what I mean.
-
Hi Experts Sorry for posting it again but this time i want to be more precise. We are using UWL to lauch workitem . Problem is with Createing AdHoc Request for sub process. AdHoc request is created and a task is added as a subprocess to Assig
-
Several content types and default field value
Hi! I have a document library with several custom content types (derived from standard Document type). One of them (CT1) has field with default value. Other content types must not contain this field. And when I upload document, this field has no defa
-
Want to re-name photos in iphoto. info not saved
I am trying to date all the photos in iPhoto. I just did about 300 and none of the info is saved. What am I doing wrong?