Re: Problems with Win7 start-up on new Satellite L670-17x
Hi guys,
three days ago I received my new Toshiba Satellite L670-17x. The installation of Win7 was not a problem, but now (after the third or fourth boot) I suddenly have a big trouble with the OS.
When I switch on my Notebook, it loads till I can see the Windows loading screen. Then - at once - the Notebook stop working... I only see the loading screen, but nothing happens. The litte light at the frontsite (which shows that the Notebook loads/works) goes off. No error messages.
I want to avoid to use the Toshiba HDD Recovery, because I saved some (important) documents on the desktop (I know... not very intelligent). I ask you to help me with my problem.
(By the way: I allready tried the Startup Repair, System Restore, Windows Memory Diagnostic Tool and to start Windows in the Safe Mode).
Thank you for your answers!
If you cannot start OS in safe mode, than, I think, you have a big problem. Im afraid only HDD recovery installation will help you with this.
The question is what to do with these data.
Maybe you should remove HDD and connect it to other computer as external one to have full access to all these data. Copy them, put HDD back into your Satellite and install OS again using HDD recovery option.
Similar Messages
-
Taking a class and the book came with Oracle 11g DVD. Tried to load it onto my laptop and get an error when checking the operating system. The error is something like "expecting 5.0, 5.1, or 6.0 received 6.1" which I am assuming refers to Win7 vs vista/xp etc... Is there a way I can tell from the DVD 11g version # (afraid I don't have it in front of me now) which version of 11g came with the book and which version file(s) I should download from Oracle to run with Win7 starter?
Thanks in advance
BillOk, I get that its certified for Pro and Ultimate (which I don't think I can run on my netbook I use for homework), but I think I veered the conversation away from my original point. The version of Oracle 11g which came with my textbook says it will run on win2k, winXP, and Vista but craps out when trying to load onto Win7. The version of Oracle (to best of my recollection, as I don't have the disc in front of me is 11.0.1.something).
I guess my big question is would this version load on Win7 pro or do I need a newer version of Oracle that will load onto Win7? If I do need a new version in order to load on Win7, how can I tell which flavor of Oracle I have on my DVD - the free version, the next one up with a student license???
Worst case scenario, I load it onto my desktop that is still running XP, but I would like to be able to take it with me on the netbook to do my homework whenever I find time.
Thanks,
Bill -
Dear Mr./Mrs.,
I had an iPhone 4 , then I bought iPhone 5s , I faced a problem when I started installing any new application other than I already had on my iCloud , I was asked to enter my password of my apple account and I entered it correctly , then I was asked to answer two questions , but I forgot the answers !! I click on forgot the answers , they send me check your email , I check my email and they send me the password that I have already entered not the answers of the questions ! How can this problem be solved ?! Hope to take my message into consideration.
Yours sincerely,
Hesham.Welcome to the user to User Technical Support Forum provided by Apple.
For your issue...
See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
Or Email Here > Apple Support iTunes Store Contact -
hi! i'm having a problem with my safari as unnecessary new tabs keeps opening overtime i open some link! is anyone experiencing something like this !
There is no need to download anything to solve this problem.
You may have installed one or more of the common types of ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the "VSearch" malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
Back up all data before making any changes.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, ask for further instructions.
Make sure you don't repeat the mistake that led you to install the malware. It may have come from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
Malware is also found on websites that traffic in pirated content such as video. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked. -
'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly. I have even done a repair to see if that works and it has not. Has anyone else found a new way to get it working?
Try Troubleshooting issues with iTunes for Windows updates.
tt2 -
Does anyone has a problem with the screen of the new ipad? (there's a part of the screen which the color in it is "very" bright) and when I move the aluminium part of the smart cover when it's attached to the ipad the colors change!! Help!!!
I'd take it into my local APple store and have them look at it. There may be something wrong inside your device.
-
I have a problem with the WiFi on my new 4th gen 32g Itouch.
I have a problem with the WiFi on my new 4th gen 32g Itouch. It is showing the bars and the wifi connection is showing that it is on but I can't get onto any of my apps that use the internet. Any suggestions as to what might be the problem? Thanks!
- Do other devices successfully connct to the same network?
- Does the iPod successfully connect to other networks?
Try :
- Reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Powering off and then back on your router.
- Resetting network settings: Setings>General>Reset>Reset Network Settings
- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections -
Problems with iwork09 opening on my new macbookair
I have a problem with opening iwork09 on my new mac book air. I didnt purchase it online, i had the installing CD and it worked great on my old mac, now I moved it from the old one to the new one and even after the update, when I try to open the pages or numbers, the window pops up saying what you can see on the pic.. any suggestions?
Thanks,mWhat version is Pages now?
The latest version is 4.3
And how did you transfer iWork from the old to the new Mac? Migration Assistant does not do a good job of transfering the iWork Apps.
You need to install from scratch and update that.
Peter -
Hi, I have a Macbook Air 13 "and I have a problem with it starting when I open it and the logo appears below a cerculer that spins and nothing else. Still not opening up
Hi aysha13
Do check the article provided by BGreg. If it's not a h/w issue, you will be able to resolve it.
Good Karma.
Holydevil. -
I´m having problems with my wifi an my new Macbook pro. It doesn´t remember the network so every time I log on - I have to "join a network". I have "ticked" the "remember password" box. I´m connecting to a wireless network on an regular Speedtouch router at home. I´m new to Mackintosh.
Try the following, in order, until (hopefully) resolved:
1a. Delete Preferred Network(s)
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
Under "Preferred Networks," delete the network(s) you regularly use from the list.
1b. Delete AirPort Keychain Entries
Launch the "Keychain Access" application located in Applications/Utilties.
In the windows on the left side: Select login for Keychains and "All Items" for Category.
Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
1c. Add Preferred Network(s)
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
Add the preferred network(s) using the "+" button.
Restart or log out then back in.
2. Move System Configuration Files
(Note: You will have to reestablish your network connections settings.)
Go to /Library/Preferences
Move the SystemConfiguration folder to the desktop.
Restart your Mac. (Note: OS X will rebuild the files that are now sitting on your desktop. If this doesn't resolve the issue, you can move the folder back to it's original location.) -
Problem with AUTO PUBLISH nd update NEW POLICY to Client .
To : who may concern , which really need urgent help .
after few days of setting up the ZESM , but then i was unable to find is there any setting which can "AUTO PUBLISH " into the Client side . Without the Client need to use the manual "UPDATE POLICY " button ?
Because , we find it that to make it silent update without the CLIENT side need to manually click the UPDATE POLICY , so i would wonder is there any way to have the AUTO UPDATE the policy from SERVER side ?
thank alot first .
From : NX ( which this few days has been keep on try and explore the ZESM 3.5 , 4.0 , 4.1IR )
Which really need help in here , due to we are almost to the end of the setup server and the IT infrastructure .I would recommend that you READ and UNDERSTAND the Installation and Administration guides from the Documentation (somebody took the job to write those, so be kind enough to read it)
Main Doc
http://www.novell.com/documentation/zesm41/
Your question is answered here:
http://www.novell.com/documentation/...a/bnk7bdx.html
See "Update Interval".
Lastly, this is a public support forum, served on a best-effort basis from the community. As such, there's no guarantee that you'll get an answer, and if you get one, that works and is correct. So, if you have un urgent or important issue, go ahead an open a support ticket with Novell Technical Services in order to be served by professional support engineers backed up by the engineers who wrote the code.
http://support.novell.com/contact/
>>>
From: nxgame<[email protected]>
To:novell.support.zenworks.endpoint-security-management
Date: 12/11/2010 3:06 pm
Subject: problem with AUTO PUBLISH nd update NEW POLICY to Client .
To : who may concern , which really need urgent help .
after few days of setting up the ZESM , but then i was unable to find
is there any setting which can "AUTO PUBLISH " into the Client side .
Without the Client need to use the manual "UPDATE POLICY " button ?
Because , we find it that to make it silent update without the CLIENT
side need to manually click the UPDATE POLICY , so i would wonder is
there any way to have the AUTO UPDATE the policy from SERVER side ?
thank alot first .
From : NX ( which this few days has been keep on try and explore the
ZESM 3.5 , 4.0 , 4.1IR )
Which really need help in here , due to we are almost to the
end of the setup server and the IT infrastructure .
nxgame
nxgame's Profile: http://forums.novell.com/member.php?userid=99703
View this thread: http://forums.novell.com/showthread.php?t=427947 -
Thai language Problem with Labelshop start (External design program)
Hi all,
In my project, we have designed form vai Labelshop start and then import it to SAPscript.
Now we're facing the problem about Thai language when we test running. Thai language in ASCII format is not correct.
Anyone please advice the possible solution for this problem. If this problem is about font in Labelshop start program, please advice how to import new font to Labelshop.
Thank you very much,
Anek.DiskStudio - Create or remove a partition without reformatting your hard drive.
http://www.micromat.com/index.php?option=content&task=view&id=33
With DiskStudio you can:
* Add new partitions to your hard drive.
* Delete partitions previously created by Apple's Disk Utility or DiskStudio.
* Erase and reformat existing partitions in a number of standard formats.
* Completely erase and repartition an entire hard disk.
Use DiskStudio to:
* Install a new copy of Mac OS X, but keep your original copy intact.
* Install a completely different operating system, such as Mac OS 9, on a new partition.
* Create a partition to hold special projects, such as audio or video files.
* Create a partition to hold scratch space for programs such as Adobe Photoshop.
When a hard drive is first set up for use, it is partitioned into one or more logical volumes. These appear on your desktop as though they were separate drives. Using the standard disk tools that come with the Macintosh, there is no way to change this partitioning scheme without completely erasing the entire drive and starting over. With DiskStudio, this is no longer necessary.
DiskStudio provides the tools you need to control how information is stored on your hard drive. An easy to use, non-destructive disk partitioner has been requested by more of our customers than any other type of utility. DiskStudio fills this important need for Mac OS X. With DiskStudio you will be able to quickly and easily change the way information is stored on your hard drives as your needs change over time.
System Requirements:
* PowerPC G3 or better. (Beige G3 machines not supported)
* Mac OS X 10.3 or greater.
* CD-ROM or DVD-ROM.
* 256 Megabytes RAM or higher.
Cost is $50.
Check this site for battery part numbers and sources. Mac PRAM, NVRAM, CUDA/PMU & Battery Tutorial
Cheers, Tom -
Stability problems with Win7 x64 and Boot Camp 3.1...
Before I was running win 7 with Boot Camp 3.0 and On top of that I installed my Chipset and Graphics from Nvidias Website. System was running without any major problems.
Now I have win7 and BootCamp 3.1 and the laptop runs like crap... System freezes sometimes only for a minute most of the time I need to hold power button.
The last time I has ScanDisk start on me and start checking. it found about 200 missing files some unindexed and MFT bitmap was repaired...
Do not know why, I'm unable to figure out what was causing that.
Currently I have win7 x86 with bootcamp 3.1 installed and The system works good.
I think there is an issue with the 3.1 x64 driver package.
If anyone has any Ideas on what I can do to figure out why the system runs so unpredictable with 3.1 x64 drivers installed. I'm whiling to experiment and reinstall win7 x64 as many times as needed so i can send an error report to apple to get this issue fixed.Wow, i've been running windows 7 64 bit in boot camp since I got my copy as a beta tester in July and never had any issues like you're describing. Boot camp 3.0 worked fine (other than the light in the audio port and minimal touchpad control, and the still present inability to dim the screen dynamically based on brightness around me). And I've had no problems with boot camp 3.1 so far. In the previous BC versions, I went to the nvidia site and downloaded whatever the current driver was for the video, but nothing specific for the chipset. With 3.1 I haven't done even that, just using what the boot camp update installed. Have you tried it with just the BC 3.1 drivers, not getting anything extra from Nvidia or anyone, just to see what happens from that point first?
About the only time I had any issues with diskchecking is when I accidentally close fusion and it abends my windows session. I make a point then of booting and telling it to ignore the disk check, editing the registry to reset the flag so it doesn't do it, then just run a disk check from within windows telling it NOT to fix anything, so that it can verify it's clean. I found the normal disk check in the preboot environment is horrendous on the MBP, takes me literally hours to run through despite it never finding anything to fix. -
Problem with Javascript and opening a new page
Hi,
I'm developping a website with Java Server Faces.
I've a problem with JavaScript.
I have a table, and each row of that table, has a button, to display more information about that specific row. I want to display this information in a new window. For this I want to use JavaScript.
The new window, of course, needs some information of the other window, to show the right data.
The first time I click the 'more-information-button', it works perfectly, but from than on, he keeps showing the same information...
Here is my jsp-page of the first page (the one with the table):
<?xml version="1.0" encoding="UTF-8"?>
<jsp:root version="1.2" xmlns:f="http://java.sun.com/jsf/core" xmlns:h="http://java.sun.com/jsf/html" xmlns:jsp="http://java.sun.com/JSP/Page">
<jsp:directive.page contentType="text/html;charset=UTF-8" pageEncoding="UTF-8"/>
<f:view>
<f:loadBundle basename="languages.MessageBundle" var="bundle"/>
<html>
<head>
<meta content="no-cache" http-equiv="Cache-Control"/>
<meta content="no-cache" http-equiv="Pragma"/>
<title>- UCV-Period -</title>
<link href="resources/stylesheet.css" rel="stylesheet" type="text/css"/>
</head>
<body style="-rave-layout: grid">
<h:dataTable binding="#{UcvPeriod.dataTable1}" headerClass="list-header" id="dataTable1" rowClasses="list-row-even,list-row-odd" rows="5"
style="left: 24px; top: 168px; position: absolute" value="#{UcvPeriod.dataTable1Model}" var="currentRow">
<h:column binding="#{UcvPeriod.column1}" id="column1">
<h:outputText binding="#{UcvPeriod.outputUcvPeriod}" id="outputUcvPeriod" value="#{currentRow['UCVPERIOD']}"/>
<f:facet name="header">
<h:outputText binding="#{UcvPeriod.outputText2}" id="outputText2" value="#{bundle.ucvPeriod_columnHeader_ucvPeriod}"/>
</f:facet>
</h:column>
<h:column binding="#{UcvPeriod.column11}" id="column11">
<h:commandButton action="#{UcvPeriod.btnDetails_action}" binding="#{UcvPeriod.btnDetails}" id="btnDetails" value="+" onclick="window.open('Details.jsp')"/>
<f:facet name="header">
<h:outputText binding="#{UcvPeriod.outputText21}" id="outputText21" value=""/>
</f:facet>
</h:column>
</h:dataTable>
</h:form>
</body>
</html>
</f:view>
</jsp:root>Here is my action, when someone clicks on the 'more-information-button':
public String bthnDetails_action() {
Object s = outputUcvPeriod.getValue();
BigDecimal ucvPeriod = (BigDecimal)outputUcvPeriod.getValue();
this.getSessionBean().setUcvPeriod(new Integer(ucvPeriod.intValue());
return "detail_ucvperiod";
}Here is my constructor of the Detailspage.
public Details() {
this.txtUcvPeriod.setValue(this.getSessionBean().getUcvPeriod());
}Here is the navigation part for this part of my faces-config.xml .
<navigation-rule>
<from-view-id>/UcvPeriod.jsp</from-view-id>
<navigation-case>
<from-outcome>detail_ucvperiod</from-outcome>
<to-view-id>/UcvPeriod.jsp</to-view-id>
</navigation-case>
</navigation-rule>Thx a lot....
AnnekeSee the tutorial "Sharing Data Between Two Pages" at http://devservices.sun.com/premium/jscreator/standard/learning/tutorials/data_sharing_twopages.html and the FAQ "How can I pass data between pages without creating SessionBean variables in Creator?" at http://devservices.sun.com/premium/jscreator/standard/reference/faqs/technical/javasource/passing_data.html. Since you can open a new window when your button is clicked, the tutorial and FAQ will explain ways to pass your data to the new window.
-
Problem with autoscale on 3d graph (new)
Hi
I have a problem with scaling on the 3D graph (it doesn't work, see attached figures). I've read about the bugs found but this one is not mentioned. Do you guys have any suggestions ? (or I am doing something wrong ?)
thanks
Attachments:
3d_image.png 36 KB
3d_graph..png 8 KBUpdate: The CAR id for the autoscaling issue mentioned in this thread is not 148431. The new CAR id is 209191. Thank you
Message Edited by Nitin T on 02-22-2010 09:53 AM
Maybe you are looking for
-
Page works on windows but not on iPad
Hi. This page works on Safari for Windows 4.0.3 but has issues on Safari for iPad: http://bit.ly/d3ouub Here's what's going on: - If you start a video in any of the AnythingSlider panels (Panel 1 and Panel 5 contain video), the video will overflow th
-
Is it possible to edit vector art pasted into Pages 4.1?
Is it possible to edit a vector shape created in Illustrator and pasted into Pages 4.1? I can adjust the transparency, scale it, even put a drop shadow on it, but I can't change the color which is all I want to do.
-
ARB PHP Sample Code SOAP Exception
Hello Everybody I m using ARB PHP Sample Code. I m using it as it is provided with my login id and transaction key I m using PHP 5.2 version I m quite new to SOAP. Everything seems fine but the script is throwing following exception. SoapFault except
-
Have done all the trouble shooting connection but my iPad still can not get wifi connection
i have done all the trouble shooting connection but mu iPAd still can not get wifi connection
-
The thumbs are cropped. If I enter the edit and use crop tool, the photo displays with a crop window. The whole image is there, but the thumbs show only what is in the crop window. How do I get iPhoto to not do this automatic crop? -B