Re: PS5 crashing when creating Panorama

Replaced 8gb of the RAM because when I removed that memory I never had a problem.
With new RAM problem persissted.
I Spoke with Apple support - tried a bunch of things over the phone.
Took the machine into the store, spent 3 hours changing things and consistently reproducing the error.
Same 8 pictures, crashes the machine every time, at the same place in the merge process - seemless composition.
However the crash never beeped like it did at home! The machine just hangs and needs to be turned off.
Apple then replaced the logic board and the graphics card. And left in their thorough testing process.
Went back in, spent another 3 hours consistenly reproducing the error.
Same 8 pictures, crashes the machine every time, at the same place in the merge process - seemless composition.
Spent time changing memory configurations. The upshot, it only crashed when the machine had 16gb of RAM. Under 8gb it never crashed - no matter what the permitations of where each memory simm was.
Replaced all 16gb of RAM.
Just put new RAM in, fired up Photoshop, did the merge with the same images - machine died - exactly the same place. This time however I now have OSX LION installed and the machine just turns off.
Any thoughts?

Just straight forward complete machine hang with a strange beeping.
That means that you have a problem with your hardware. It could be a hard disk, the RAM, the power supply, or the motherboard. The pattern of beeps is there to tell technicians what the cause might be.
Software tests of RAM are useless - they'll only catch errors that should have prevented the machine from booting in the first place.
You need to take the machine in for service and reproduce the failure for the technicians.
And when they complain that the cause is Photoshop, tell them that software cannot cause a hardware failure like that and that they need to give the case to a more experienced technician.

Similar Messages

SSMS crash when creating new database diagram

For several years I have been unable to create database diagrams from within SSMS. I have tried every combination of VS2005, VS2008, VS2012 and VS2013 with every combination of SQL2005, SQL2008, SQL2012 and SQL2014.
I have installed, uninstalled, and repaired many dozens of times. I am currently using VS2013 ultimate with SQL2014 express.
I have tried every related 'workaround' that I can find on the internet. Still the problem persists.
Any help would be deeply appreciated.
Here are the relevant details with file versions:
In SSMS, I right-click on a database and choose New Database Diagram. A Blank diagram window appears with the SSMS error dialog:
===================================
Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (Microsoft.VisualStudio.OLE.Interop)
Program Location:
   at Microsoft.VisualStudio.OLE.Interop.IOleCommandTarget.QueryStatus(Guid& pguidCmdGroup, UInt32 cCmds, OLECMD[] prgCmds, IntPtr pCmdText)
   at Microsoft.VisualStudio.Platform.WindowManagement.DocumentObjectSite.QueryStatus(Guid& pguidCmdGroup, UInt32 cCmds, OLECMD[] prgCmds, IntPtr pCmdText)
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.QueryStatus(Guid& pguidCmdGroup, UInt32 cCmds, OLECMD[] prgCmds, IntPtr pCmdText)
   at Microsoft.Internal.VisualStudio.Shell.Interop.IVsTrackSelectionExPrivate.Register()
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.ConnectSelectionContext()
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.Activate()
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowManagerService.viewManager_ActiveViewChanged(Object sender, ActiveViewChangedEventArgs e)
   at System.EventHandler`1.Invoke(Object sender, TEventArgs e)
   at Microsoft.VisualStudio.PlatformUI.ExtensionMethods.RaiseEvent[TEventArgs](EventHandler`1 eventHandler, Object source, TEventArgs args)
   at Microsoft.VisualStudio.PlatformUI.Shell.ViewManager.SetActiveView(View view, ActivationType type)
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.ShowInternal(ShowFlags showFlags)
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.<Show>b__26()
   at Microsoft.VisualStudio.ErrorHandler.CallWithCOMConvention(Func`1 method)
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.Show()
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.MarshalingWindowFrame.<Microsoft.VisualStudio.Shell.Interop.IVsWindowFrame.Show>b__7a()
   at Microsoft.VisualStudio.Shell.ThreadHelper.Invoke[TResult](Func`1 method)
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.MarshalingWindowFrame.Microsoft.VisualStudio.Shell.Interop.IVsWindowFrame.Show()
   at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.VirtualProject.CreateDesigner(Urn origUrn, DocumentType editorType, DocumentOptions aeOptions, IManagedConnection con, String fileName)
   at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.VirtualProject.Microsoft.SqlServer.Management.UI.VSIntegration.Editors.ISqlVirtualProject.CreateDesigner(Urn origUrn, DocumentType editorType, DocumentOptions aeOptions, IManagedConnection
con, String fileName)
   at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.ISqlVirtualProject.CreateDesigner(Urn origUrn, DocumentType editorType, DocumentOptions aeOptions, IManagedConnection con, String fileName)
   at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.VsDocumentMenuItem.CreateDesignerWindow(IManagedConnection mc, DocumentOptions options)
   at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.VsDocumentMenuItem.InvokeDesigner(IManagedConnection connection)
   at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.VsDocumentMenuItem.Invoke()
   at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ToolsMenuItemBase.MenuInvokedHandler(Object sender, EventArgs args)
Version info taken from Sql Server Management Studio/Help/About dialog:
Microsoft SQL Server Management Studio      12.0.2000.8
Microsoft Analysis Services Client Tools    12.0.2000.8
Microsoft Data Access Components (MDAC)     6.1.7601.17514
Microsoft MSXML                             3.0 4.0 5.0 6.0
Microsoft Internet Explorer                 9.11.9600.17358
Microsoft .NET Framework                    4.0.30319.18444
Operating System                            6.1.7601
DLL versions
c:\Program Files(x86)\Common Files\microsoft shared\Visual Database Tools
dsref80.dll version 12.0.21005.1
c:\Program Files(x86)\Common Files\microsoft shared\MSDesigners8
msdds.dll    12.0.21005.1
msddsf.dll   12.0.21005.1
msddslm.dll 12.0.21005.1
msdds.mp.dll 12.0.21005.1
msddsp.dll   12.0.21005.1
c:\Program Files(x86)\Common Files\microsoft shared\MSDesigners8\Resources\1033
msddsui.dll 12.0.21005.1

Hello,
There is a Connect item related to this issue. This is the link of that Connect item:
https://connect.microsoft.com/SQLServer/feedback/details/730985/smss-crashes-when-creating-new-database-diagram
Try the workarounds posted there (Workarounds section).
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

"insufficient RAM to fill" message when creating panoramas - 16 GB on my computer?[was: RAM]

Why am I getting "insufficient RAM to fill" message when creating panoramas when I have 16 GB on my computer?

You don't say which version of PSE or which operating system, but except for PSE 12/mac, all versions of PSE are 32 bit programs, which means they can only use a maximum of about 3 GB of ram, no matter how much you have in your system. You can try going to the editor>preferences>performance and upping the percentage available for PSE.

Premiere Pro CC updated - crashes almost immediately on my mac OS X Yosemite 10.10.3. Crashes at startup, crashes with media import, crashes when creating a sequence. NEED HELP FAST I have tried many troubleshooting solutions I found online nothing has

Premiere Pro CC updated - crashes almost immediately on my mac OS X Yosemite 10.10.3. Crashes at startup, crashes with media import, crashes when creating a sequence. NEED HELP FAST> I have tried many troubleshooting solutions I found online nothing has worked.

Hi,
Sorry to hear about the experience. Please provide your computer configuration details.
Memory, Processor, Graphics card, Exact version of Premiere Pro, Error message that you are get. If you can post screenshots of the error report that would be helpful.
Thanks,
Rameez

InDesign CC 2014 crashes when creating alternative layouts

InDesign CC 2014 crashes when creating alternative layouts. I successfully created alternative layouts in 3 documents, now I cannot create any at all, it just crashes the program.

I just taught a class using Alternative Layouts in InDesign CC 2014 without crashing.
Start by telling us what kind of computer and operating system you're running. Are you having any other problems in InDesign CC 2014? Have you try restoring your preferences?
Trash, Replace, Reset, or Restore the application Preferences

PS CC crashes when editing panoramas or HDR made in LR CC from pictures taken by iPhone 5c.

PS CC 2014 crashes when editing panoramas or HDR made in LR CC from pictures taken by iPhone 5c. It is consistent. I have tried several different settings but does not get this to work. Seems like the import from LR to PS is not working as good as it did with LR 5 and CC2014. Anyone else seen anything like this? / Ola

Hi again,
I have deinstalled all versions of PS and reinstalled CC 2014. Updated the Graphic driver to the latest version. The system configuration is given below, processor etc. After reinstallation I have tried several combinations of import from LR to PS. It does not matter if it is a dng or a NEF raw file PS keeps crashing when I try to edit the imported file. See attached screen dump. Stressful… I have now tried everything I can think of and nothing has improved the situation so far. / Thanks Ola
Windows 7 64-bit SP!
Intel Core i7-3930K CPU @ 3,20Hz
64.0Gb RAM
NVIDIA GeForce GTX 680

Yesterday I installed motion 5. It crashes when creating a new project or opening a template or old project. It runs on macbook 2.1 intel core 2.16 GHz. Thanks or helpful hints.

Yesterday I installed motion 5. It crashes when creating a new project or opening a template or old project. It runs on macbook 2.1 intel core 2.16 GHz. Thanks or helpful hints.

It used to be in there (id 226635 is the last one with it); should I clean it up a bit and put it back with a bit more of a disclaimer?

Lab View crashing when creating new bound variable

Hi,
I have to connect to an OPC server from Lab view and have played around a bit with the OPC client options.
I would like to use shared variables as that seems like a handy way to access the needed variables. I have followed the instructions in http://zone.ni.com/devzone/cda/tut/p/id/7450 .
However when i use the create bound variables feature LabView crashes when i browse for OPC tags, step3 under "Create Shared Variables that Connect to the OPC Tags through the I/O Server". If i try to expand the node "OPC1" LabView crashes. I try to access the built in NI OPC server locally.
Also during this process LabView gives warning box saying "Configure OPC server to run with an identity of interactive user". we did try the the steps in http://zone.ni.com/reference/en-XX/help/371618G-01/lvdschelp/config_local_opc_serv/ . However the The interactive user button was disabled under NI OPC sever properties.
Is there something i have missed? Something that needs to be configured before going through that tutorial?
I run LabView 2011 on a 64 bit Win7P computer. The DSC module and the NI OPC Servers are installed and seem to work (when running the OPC examples ).
Thanks.

Hello AmritaNikhil,
Thanks for the post, I have a few questions for you about this issue.
What versions of NI OPC Servers are you using?
Is the server hosted on your local machine or on a remote machine?
Are you able to successfully connect NI OPC Servers and NI OPC Quick Client?
Have you been successful in using OPC IO Servers in the past or has this issue occurred since you have started your application?
Can you consistently reproduce this crash?
You can try to work around this issue by using Network Items rather than Project Items when creating bound variables in the Create Bound Variables window. Please try this option and let me know if you have any additional information about your application that may be helpful in solving this issue. In addition, I have also included a link to a similar post. Hope this helps!
LV 2011 crash when create bound variables
http://forums.ni.com/t5/LabVIEW/LV-2011-crash-when-create-bound-variables/m-p/1879137
Paul-B
Applications Engineer
National Instruments

Crash when creating new file

illustrator crashes when creating a new file or opening existing - no special message. Just "illustrator has stopped working"
graphics drivers uptodate, tried uninstall, reinstall, tried cleaner, tried sign-out-of creative cloud, nothing works.
running windows 8 64bit

If it works on another account, then pretty obviously your permissions are screwed on the other account and you need to fix them...
Mylenium

Illustrator CC - CRASHES when creating/opening new document.

My Illustrator CC crashes when:
- when I open any *.ai file saved on my disk
- when I try to create new file
I can open the Illustrator (blank, without any document) but as soon as I want to open some document or create (File/New) it crashes immediatelly wit "Illustrator stopped responding" and it closes.
I tried to reinstall it but it didnt help.
I have brand new (got it for 10 days) PC with Windows 8.1
Yesterday Illustrator worked without a problem. Today it just can not run.
Please help. Thank you

Pablo,
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

InDesign CC crashes when creating a text box

My InDesign CC 2014 keeps crashing when I try and create a new text box and type in it. I don't understand why. Help please!

Could be. Try Remove minor corruption by exporting
Could also be a bad font, but that's less likely unless you are using fonts you don't normally use.

RoboHelp 7 crashes when creating new project with files from VSS

RoboHelp crashes when I create a new project and choose to get existing files from Visual Source Safe to load into the project. Does anyone have a solution to this problem or a suggestion as to why this may be happening? I'm attaching the errors associated with the crashing.
Also, we have a very large Help system (985 topics) which compiles into a 46 MB chm file. Is there a maximum suggested topic size (per topic) and a maximum suggested number of topics per project? Could this be part of the reason RoboHelp is crashing? We've always had a large Help system since we started using RoboHelp several years ago but the crashing is a more recent problem.
Thanks,
Carissa

I had the same issue then I found out all you have to do is to set the default view to List before opening any previous or new project and it worked, credit goes to this user below who found the solution.
ahmedMac25
I was able to resolve by workaround:
1. Closed all open applications
2. relaunch Finder
3. run sudo find / -name ".DS_Store" -exec rm {} \;
4. this removes all .DS_Store old files on the computer
5. launch finder and set default view to "LIST VIEW" as shown here:http://macs.about.com/od/usingyourmac/ss/Setting-Finder-Views-For-Folders-And-Su b-Folders_2.htm
5. rerun the offending application and file chooser works

Java plugin crashes when creating a new sun.security.pkcs11.SunPKCS11 object

Hi,
I have created an applet which signs pdf files and works fine.
Applet is used in a website that needs client authentication with the same smart card wich is used to sign the documents.
The java plugin crashes at this line of code. The message showed - The java applet plugin has failed
sunpkcs11 = new sun.security.pkcs11.SunPKCS11(pkcs11);
I think it crashes because the pkcs11 module is still used, the light of the smart card reader is not blinking is a fixed light.
I haven't got an error log because the java plugin crashes. Only shows the log lines before that line of code.
Later the sunpkcs11 provider is added if the smarcard is unplugged and java plugin don't crashes.
Security.addProvider(sunpkcs11);
If I unplug the smart card after client authentication and before sign a document, the java plugin don't crashes and later, the provider is added, and the document is signed and the light of the smart card reader is blinking before signing.
Firefox 27 version.
Java Standar Edition version 7 update 51 compilation 1.7.0_51-b13
I'm using mac os x v10.9 64 bits system
I have seen:
http://bugs.java.com/view_bug.do?bug_id=8026833
I have tested the same applet with firefox, in windows 7, windows 8, ubuntu 13.10 and fedora 19, and works and signs documents after client authentication.
when applet is loaded in windows is not using pkcs11. But I haven't got the same problem.
But in mac os x v10.8 and v10.9 java plugin crashes.
Is there a way to disconnect programatically the pkcs11 module or any other solution?
I'm not sure why the java plugin crashes. Has got any relationship with the bug 8026833?
Any suggestion?.
Thank you.

Hi,
According to your post, my understanding is that you had Errors TF30162 and TF250025 when creating a New Team Project in TFS2012 with Sharepoint Site on Visual Studio.
The Errors TF30162 seemed that the reports for TFS could not be uploaded due a permission problem. The fix was really easy.
Go to your team foundation server
Open the administration console.
Click on Reporting
Click on Edit
Click on Reports Tab
Enter the credential for the Reports
Save
Click on Start Jobs
In addtion, the problem may be due to the caching done by Team Explorer in Visual Studio. Exiting the copy of VS on the client and reloading it will fix the problem as the updated team process settings will cached locally.
To resolve the Errors TF250025, you will need to register a new internal URL for the SharePoint site using Alternate Access Mappings.
Here are two great blogs for you to take a look at:
http://blogbaris.blogspot.in/2012_08_01_archive.html
http://petersullivan.com.au/2009/11/23/tf250025-and-tf262600-errors-on-team-foundation-server-tfs-2010-project-portal-dashboard/
If still no help, for quick and accurate answers to your questions, it is recommended that you initial a new thread in Visual Studio Team Foundation Server forums.
Team Foundation Server – General:
http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=tfsgeneral
Thank you for your understanding.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

RH7 crashes when creating a new topic

Every time I create a new topic from the TOC, RH7 crashes when I try to save it. I thought this was an issue with 64-bit Vista so I now have a new machine (Dell Latitude D630, Vista Enterprise SP2) but the same problem happens. The error message is
Faulting application RoboHTML.exe, version 7.3.1.0, time stamp 0x496b5cd9, faulting module IMAGEAPI.dll, version 7.0.145.0, time stamp 0x46f5dc83, exception code 0xc0000005, fault offset 0x00014c00, process id 0x14e4, application start time 0x01caa332e125ed58.
and the full log information is
Log Name:      Application
Source:        Application Error
Date:          01/02/2010 11:41:35
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      jbrowning-lapto.ie.com
Description:
Faulting application RoboHTML.exe, version 7.3.1.0, time stamp 0x496b5cd9, faulting module IMAGEAPI.dll, version 7.0.145.0, time stamp 0x46f5dc83, exception code 0xc0000005, fault offset 0x00014c00, process id 0x14e4, application start time 0x01caa332e125ed58.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2010-02-01T11:41:35.000Z" />
    <EventRecordID>3892</EventRecordID>
    <Channel>Application</Channel>
    <Computer>jbrowning-lapto.ie.com</Computer>
    <Security />
</System>
<EventData>
    <Data>RoboHTML.exe</Data>
    <Data>7.3.1.0</Data>
    <Data>496b5cd9</Data>
    <Data>IMAGEAPI.dll</Data>
    <Data>7.0.145.0</Data>
    <Data>46f5dc83</Data>
    <Data>c0000005</Data>
    <Data>00014c00</Data>
    <Data>14e4</Data>
    <Data>01caa332e125ed58</Data>
</EventData>
</Event>

Hi Peter, thanks for your input.
I eventually found out what was causing this, but no idea why it should be an issue. The clue was in the error message: "...faulting module IMAGEAPI.dll..." - so I figured it was something to do with an image.
This wasn't happening on the sample projects only on the projects that I created myself. These projects all share a common property, and that is that the topic template contains a placeholder graphic that will (in the individual topics) be a link to another topic. In order to make life easy for myself, I added the placeholder to the template and then attached a hyperlink to '#' to it. It was that that caused the problem - if I remove the dummy '#' from the picture the problem goes away.
It doesn't explain what the issue was, but it fixes it - even though I lose the convenience of having a ready-made hyperlink on all my new graphics.
Cheers
J.

IPhoto crashes when creating a new slide show

iPhoto immediately crashes, when I try to create a new slide show.
I have already tried to create a completely new library, but happens just the same: I want to create a new slide show (with only some pictures), and then the program crashes and I must kill it via "force quit".
I also de-installed iPhoto and then installed it again. No change at all. The program chrashes when I try to create a new slide show.
Any idea what could help?

It looks like there's something in your account that's the culprit. It could be a preference file other than iPhoto's. Here's how to test that:
Trouble Shooting Preferences
NOTE: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
1 - close all applications.
2 - open your Home/Library folder and Option-drag (copy) the Preferences folder to the Desktop.
3 - select the contents of your Home/Library/Preferences folder and drag them into the Trash bin in the Dock. You will be asked to provide your Admin password.
4 - reboot.
5 - run the application again and determine if the problems is fixed
6 - If the problem is fixed:
A - open the working Home/Library/Preferences folder.
B - Open the Preferences folder on the Desktop, select all of the contents and drag them into the working Home/Library/Preferences folder.
C - When the Copy window pops up check the "Apply to All" check box and then click on the Don't Replace or Skip button.
D - reboot.
7 - If the problem is NOT fixed, drag the contents of the Preference folder on the Desktop into the Home/Library/Preference folder and replace the entire contents that were created by clicking on Replace.
8 - reboot.

Re: PS5 crashing when creating Panorama

Similar Messages

Maybe you are looking for