RE: purpose of Personalization option (check box) while doing transports.
Hi all,
i am creating transport request and we recently upgraded from ECC6.0 to EPH4, after the upgrade we are getting warning messages if we select personalization option, can any one tell me the purpose of personalization option while creating a transport request and what happens if i dont select it.
Thanks,
SS
Nothing is going happen if yuo do not select personilazation.
Personalization is a way to save information that could be common to users, I meant to a user role... E.g. you can create SAP queries and manage authorizations by user groups. Now this information can be stored in the personalization tab of the role. (I supposed that it is a way for SAP to address his ambiguity of its concept of user group and roles: is "usergroup" a grouping of people sharing the same access or is it the role who is the grouping of people sharing the same access?)
Thanks,
Prasant
Similar Messages
-
Purpose of 'I/O' check box in 'Switching on/off Navigation Attr.' ?
Hi,
What is the purpose of 'I/O' check box in 'Switching on/off Navigation Attr.' screen in InfoCube definition? (Edit InfoCube: Characteristics)
There are three columns in the screen. Navigation Attribute, Long description and I/O (check box.) Navigation Attribute & Long description are automatically populated by the system based on which attribute I selected as Navigational in respective InfoObject definitions.
Do I need to check the 'I/O' check box inorder to use these navigational attributes in the Query (to use all the features of Nivigational attr. like drill down & display like a char. etc.) ?
Your help is appreciated.
Regards,
Lakshmi
nullHi lakshmi,
You are right, that check box will enable you to use a nav attr in the query. If you do not select it here, then even though this char has a nav attr, you will not be able to see or use it in the query designer.
Hope this helps... -
Enabling User Specific check box while saving layout in VA05
Dear All,
While saving layout in VA05 user specific check box is in disabled mode , is there any possibility to enable the check so that i can create user wise layouts in VA05.
Regards,
PrasadHi,
Goto SU3, enter user name and press enter
goto parameters tab, enter parameter ID SD_VARIANT_MAINTAIN and parameter value 'A' and save.
Now check in VA05, you will get save button in active mode.
Regards,
Hrishi -
Pingpong _Interval Check error while doing failover
Hi
The following error messages are seen when actaully application is getting failovered from one to another...
These are seen from hadev1 node....
Sep 11 17:01:37 hadev1 last message repeated 2 times
Sep 11 17:01:57 hadev1 SC[SUNW.abc:1.0,abc_rgp,abc_rs,simple_probe]: [ID 141062 daemon.error] Failed to connect to host pnlh and port 2638: Connection refused.
Sep 11 17:01:57 hadev1in.mpathd[1654]: [ID 472890 daemon.error] phyint_inst_v4_sockinit: setsockopt IP_DONTFAILOVER (inet
hme0): Option not supported by protocol
Sep 11 17:01:58 hadev1 Cluster.RGM.rgmd: [ID 494478 daemon.notice] resource abc_rs in resource group abc_rgp has requested failover of the resource group on hadev1
Sep 11 17:01:58 opal Cluster.RGM.rgmd: [ID 423291 daemon.error] RGM isn't failing resource group <pnbmc_rgp> off of node
<hadev1>, because there are no other current or potential masters
Sep 11 17:01:58 opal Cluster.RGM.rgmd: [ID 702911 daemon.error] Resource <abc_rs> of Resource Group <abc_rgp> failed
pingpong check on node <hadev2>. The resource group will not be mastered by that node.
Sep 11 17:01:58 opal Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource abc_rs status on node hadev1change to R_FM_FAULTED
Sep 11 17:01:58 opal Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource abc_rs status msg on node hadev1change to <Unable to Failover to other node.>
Sep 11 17:01:58 opal [SUNW.abc:1.0,abc_rs,abc_rgp]: [ID 115617 daemon.error] Error in failing over the resource group:abc_rs
Sep 11 17:02:17 hadev1 in.mpathd[1654]: [ID 472890 daemon.error] phyint_inst_v4_sockinit: setsockopt IP_DONTFAILOVER (inet
hme0): Option not supported by protocol
Sep 11 17:03:57 hadev1 last message repeated 5 times
Sep 11 17:03:58 hadev1 [SUNW.abc:1.0,abc_rs,abc_rgp]: [ID 722342 daemon.error] Could not Restart/Failover the dataservice.
Sep 11 17:03:58 hadev1 Cluster.PMF.pmfd: [ID 819736 daemon.notice] PMF is restarting process that died: tag=abc_rgp,abc_rs,0.mon, cmd_path=/opt/SUNWabc/bin/abc_probe.ksh -R abc_rs -G abc_rgp -T SUNW.abc:1.0, max_retries=4, num_retries=0
Can Someone tell how to resolve this pingpong check error on other node...
The Error messages document says to sleep if the scha_control fails.....I need clarity on this of what needs to be done.......
Need urgent help on this.......I am not having of support contract...and working on the same to have..
My OS is Solaris 9..I have installed all the patches...
The PingPong check error is causing the failover not to happen as below:
Sep 12 11:02:20 hadev1 Cluster.RGM.rgmd: [ID 423291 daemon.error] RGM isn't failing resource group <abc_rgp> off of node
<hadev1>, because there are no other current or potential masters
Sep 12 11:02:20 opal Cluster.RGM.rgmd: [ID 702911 daemon.error] Resource <abc_rs> of Resource Group <abc_rgp> failed pingpong check on node <hadev2>. The resource group will not be mastered by that node.
I have checked this pingpong check error in " Error Messages guide"...
They say solution as ...
A properly-implemented resource monitor, upon encountering the failure of a
scha_control call, should sleep for awhile and restart its probes. If the resource remainsunhealthy, the problem that caused the scha_control call to fail (such as pingpong checkdescribed above) will eventually resolve, permitting a later scha_control request to succeed.
Therefore, no user action is required. If the system administrator wishes to permit failovers to be attempted even at the risk of ping-pong behavior, the Pingpong_interval property of the resource group should be set to a smaller value.
I have no clarity on where exactly i need to sleep if the scha_control call fails.. -
Error while doing transport to Quality from Solman
Dears,
I am using Solman 7.0 SP15.
I have recently configured Charm,Now to test it funcationality I created one transport and as per process released it by solman.
Now I am trying to import this request by Solman into QAS but it is giving error:
TMS communication error with TMSSUP#QAZ.DOMAIN_DEV
Message no. XT153
Diagnosis
There was an error during communication with the RFC destination
TMSSUP#QAS.DOMAIN_DEV
System Response
The exact error message of the system is:
Name or password is incorrect (repeat logon)
Procedure
The function terminates.
Procedure for System Administration
Check your TMS configuration with the transaction STMS.
I checked all RFCs are working fine with authorization test,RFC TMSSUP#QAZ.DOMAIN_DEV is also working fine but its created with clicked logon screen option that i read is OK.
We have one RFC destination to 000 Client of our domain controller DEV.
Please suggest do i nead to create RFC destnations to QAS and PRD also to import requests or what is the root cause of this issue.
Shivam
Edited by: Shivam Mittal on Jan 22, 2009 9:30 AMHi,
TMSSUP#QAZ.DOMAIN_DEV Client 000 ...
Looks like the user who performs action "import to qas" does not exist in QAZ (000).
/cheers -
Query Problem while doing Transportation
Hi,
Last Month in the <b>release I</b> i created 17 Reports and there are assigned to RRI also.
After that i Transported both the reports and RRI to QA. It is success .
Later on there are some modifications in the reports and i modified them and i again Transported both the reports and RRi and it was success.
This month in the <b>release II</b> i again modified the same 17 reports and i transported the reports to QA. The problem is 13 reports had changed in the QA but the remaining 4 reports are shown as 8 reports(4 x 2) with same technical names . I did not transport the RRI this time.
So i found a single report as 2 reports with same technical name. this means that it has not overwritten.
How should i solve this problem.
Can any one give the solution for this.......
Thanks & Regards
Jagannadha RajuHi,
Check which elements of the query has not been transported, Check the queries in QA and you will find what is missing and also check that the missing Elements of the query are not saved in $TMP folder. Find out exactly which of the missing elements are not transported and transport them alone will do the job.
Also notedown the technical names of the missing elements and you can find which item it is by searching in Metadata Repository first search with the Query Technical name and then include technical name of your Query element.
Regards
Ranga
Message was edited by:
Ranga -
Error 8 In Update,while doing transport from sandbox to Dev.
Hi All,
I am trying to transport some 100 queries from sandbox to development. I made a 10 queries in a single request and transported it from sandbox to development.First 6 transports went fine.(means 60 queries with out any issues).next 4 transport request ended with the Error 8 in update.
R3TRELEM42NJZNEBP9QAAI6BSCUZI8CYG original object cannot be replaced
R3TRELEM42NJZNEBP9QAAI6BSCUZI8CYG was not imported in this step
Start import R3TRELEM42NJZNM088BZT4PRY6XBSABO8 ...
R3TRELEM42NJZNM088BZT4PRY6XBSABO8 original object cannot be replaced
R3TRELEM42NJZNM088BZT4PRY6XBSABO8 was not imported in this step
Start import R3TRELEM42NJZNTOR6XPBR9840ZO2CAE0 ...
R3TRELEM42NJZNTOR6XPBR9840ZO2CAE0 original object cannot be replaced
R3TRELEM42NJZNTOR6XPBR9840ZO2CAE0 was not imported in this step
Start import R3TRELEM42NJZO1DA5JEUDSO9V20CE93S ...
R3TRELEM42NJZO1DA5JEUDSO9V20CE93S original object cannot be replaced
R3TRELEM42NJZO1DA5JEUDSO9V20CE93S was not imported in this step
Can you please give ur valuable Suggestion Please.
Thanks.
SrinivasTry re-importing the transports with the following import options:
1) Overwrite Originals
2) Overwrite Objects in Unconfirmed Repair -
Hi Experts,
We are doing transports from BD1 to BQ1 and getting this error message.
Could anyone please let me know why and what would be the solution for the following error message:
Execution of programs after import (XPRA)
Transport request : BD1K900065
System : BQ1
tp path : tp
Version and release: 370.00.09 700
Execution of programs after import (XPRA)
End date and time : 20070803133308
Ended with return code: ===> 8 <===
Thanks in advance.
Best Regards,
Chandu.Raymonds,
There is huge list of errors coming up. Some of them are as below:
Navigation attribute 0SALESORG is missing in characteristic 0PLANT
Navigation attribute 0SALES_DIST is missing in characteristic 0PLANT
Characteristic 0RT_LOCATIO: Referenced characteristic 0PLANT not (actively) available
Attribute 0INT_CUST from characteristic 0SALESORG not (actively) available
Attribute 0CRM_MKTELM from characteristic 0UCCONTRACT not (actively) available
Attribute 0CRM_MKTELM from characteristic 0UCCONTRACT not (actively) available
Hierarchy characteristic 0BPARTNER of characteristic 0UCCONTRACT is not active
Characteristic 0UCOUTLCONT: Referenced characteristic 0UCCONTRACT not (actively) available
Characteristic 0UCOUTLCONT: Referenced characteristic 0UCCONTRACT not (actively) available
Thanks in advance.
Best Regards,
Chandu. -
Use of (User Dep check Box) in Infogroup.
Hi,
While defining infogroup
1st option (We Define info group/ Text / user Dep & REf)
Can you tell me what is the use of (User Dep check box) & who does it makes a difference if i select & deselect that option.
What impact it has.
Appreciate your quick response
Regards
RajeshHi Nsr.Rajesh.,
If parameter UGR (country specific) has been set in user profile, the infogroups can be made dependent on that. If UGR has not been set up, system uses reference user group.
When you configure any infogroup, the first column is for user group. You would put value 10 if your profile has been set to UGR 10 and you want the infogroup to be dependent on that. If you do not have profile set to any UGR, system would make use of reference user group, like 00, which would then be used while configuring infogroup.
To maintain user parameters, follow SPRO>Personnel Management>Personnel Administration>Basic Settings>Maintain user parameters. You can then check the values through transaction SU3.
Donnie -
LOVs default format set to Check Box - Error
1. I created a custom attribute and a custom Item type for a particular page group in 10g
2. I created a LOV and used it in the custom attribute type
3. I used the custom attribute type in the custom Item type that I created.
4. While customizing the Item type, I set up the LOVs (about 6 records) default format to Check Box.
5. While adding the custom item type to a page, the custom attribute (which should be displayed as a Check Box) displays as shown below:
&amp;lt;INPUT TYPE=&amp;quot;checkbox&amp;quot; NAME=&amp;quot;p_attribute&amp;quot; VALUE=&amp;quot;1&amp;quot;&amp;gt;1&lt;BR&gt; &lt;INPUT TYPE=&quot;checkbox&quot; NAME=&quot;p_attribute&quot; VALUE=&quot;2&quot;&gt;2<BR> <INPUT TYPE="checkbox" NAME="p_attribute" VALUE="3">3<BR> <INPUT TYPE="checkbox" NAME="p_attribute" VALUE="4">4<BR> <INPUT TYPE="checkbox" NAME="p_attribute" VALUE="5">5<BR> <INPUT TYPE="checkbox" NAME="p_attribute" VALUE="6">6
6. I assume that the HTML is not rendered properly, or is it some sort of a bug?
7. It displays properly if I select anything other than Check Box while setting up the LOV.
8. I did test this in IE and Firefox and both displays the same thing.
Any help or pointers would be greatly appreciated.
Thanks!Update:
I added 2 custom attributes to a custom item type. Both custom attributes are associated with separate LOV's. When I try to add the item, I get this following error and it's not allowing me to add the Item (custom item type from base URL):
Error:
Select a valid value from the LOV. (WWS-22207)
Couldn't save attribute Version. (WWV-03005)
Any help is appreciated.
Thanks! -
I have a check box and need the next field (the date) to be
filled out if the check box is filled out.
i have four pages, a search page, a results page, a details
(update) page and a update validation page. just not sure where or
what to put in to make it go. stolen bike information is entered on
the details (update) page.
so now where and how do i make the stolen date required if
the check box is selected?....lol. also if the box after that can
be required if the first two are...lol
As of right now they are updating the information if filled
out but if i select the check box it does it without me filling out
the date or report number.
thanks in advance for any help you can give me...If you're going to make a field be required based on a client
side event (checking a check box), then you have to use javascript.
Since the stolen date field may be omitted if the checkbox is
left empty, you wont want the date field to be required.
Once the user attempts to submit the form, you will need a
function to run to validate if the date field has been entered
corresponding to the field with the checkbox. If the date field has
not been filled out, then dont submit the form and throw an alert..
If a value exists for the date field while the checkbox is checked,
then submit the form.
If you're unfamiliar with js, then you will have to run all
of your validation on the server side, and notify the user of the
errors after they have submitted the form. -
Unchecking All Check Boxes with one button?
Hello,
I am trying to include a button which automatically unchecks multiple checked boxes. Does anyone have any idea on how I could do this? Please let me know
Thanks,
Dilipthe push button is ok to hide and show objects
but will not make you check or uncheck the check box
great that u solved the issue
good luck -
hi
i am displaying list alv with check boxes, now i want to select few check boxes and doing some operation, after this operation i need to disable thoese check box.
can u pls guide me.
thanks.Hi,
using styles it is possible.
first you need to declare the one extra field in the internal table..
1. HANDLE_STYLE TYPE LVC_T_STYL.
DECLARE work area,and table
2. DATA: LS_EDIT TYPE LVC_S_STYL,
LT_EDIT TYPE LVC_T_STYL.
changing the style...
3.
LOOP AT IT_FINAL INTO LS_OUTTAB WHERE FLAG = 'X'.
V_INDEX = SY-TABIX.
LS_EDIT-FIELDNAME = 'MATNR'.
LS_EDIT-STYLE = CL_GUI_ALV_GRID=>MC_STYLE_ENABLED.
LS_EDIT-STYLE2 = SPACE.
LS_EDIT-STYLE3 = SPACE.
LS_EDIT-STYLE4 = SPACE.
LS_EDIT-MAXLEN = 8.
INSERT LS_EDIT INTO TABLE LT_EDIT.
LS_EDIT-FIELDNAME = 'VBELN'.
LS_EDIT-STYLE = CL_GUI_ALV_GRID=>MC_STYLE_ENAABLED.
LS_EDIT-STYLE2 = SPACE.
LS_EDIT-STYLE3 = SPACE.
LS_EDIT-STYLE4 = SPACE.
LS_EDIT-MAXLEN = 8.
INSERT LS_EDIT INTO TABLE LT_EDIT.
LS_EDIT-FIELDNAME = 'POSNR'.
LS_EDIT-STYLE = CL_GUI_ALV_GRID=>MC_STYLE_ENABLED.
LS_EDIT-STYLE2 = SPACE.
LS_EDIT-STYLE3 = SPACE.
LS_EDIT-STYLE4 = SPACE.
LS_EDIT-MAXLEN = 8.
INSERT LS_EDIT INTO TABLE LT_EDIT.
INSERT LINES OF LT_EDIT INTO TABLE LS_OUTTAB-HANDLE_STYLE.
MODIFY IT_FINAL INDEX V_INDEX FROM LS_OUTTAB TRANSPORTING
HANDLE_STYLE .
ENDLOOP.
assigning the style to Layout..
4. GS_LAYOUT-STYLEFNAME = 'HANDLE_STYLE'.
REUSE_ALV_GRID_DISPLAY_LVC. you can do the same with CL_GUI_ALV_GRID also.
REPORT ZTESTALV.
TYPE-POOLS: SLIS.
*- Fieldcatalog
DATA: IT_FIELDCAT TYPE LVC_T_FCAT,
IT_FIELDCAT1 TYPE SLIS_T_FIELDCAT_ALV..
*- For Events
DATA:IT_EVENTS TYPE SLIS_T_EVENT.
DATA: X_FIELDCAT TYPE LVC_S_FCAT,
X_FIELDCAT1 TYPE SLIS_FIELDCAT_ALV.
DATA:X_LAYOUT TYPE LVC_S_LAYO.
"{ FOR DISABLE
DATA: LS_EDIT TYPE LVC_S_STYL,
LT_EDIT TYPE LVC_T_STYL.
"} FOR DISABLE
DATA: BEGIN OF IT_VBAP OCCURS 0,
VBELN LIKE VBAP-VBELN,
POSNR LIKE VBAP-POSNR,
HANDLE_STYLE TYPE LVC_T_STYL, "FOR DISABLE
BUTTON(10),
END OF IT_VBAP.
DATA: LS_OUTTAB LIKE LINE OF IT_VBAP.
SELECT VBELN
POSNR
UP TO 10 ROWS
INTO CORRESPONDING FIELDS OF TABLE IT_VBAP
FROM VBAP.
DATA:L_POS TYPE I VALUE 1.
CLEAR: L_POS.
L_POS = L_POS + 1.
X_FIELDCAT-SELTEXT = 'VBELN'.
X_FIELDCAT-FIELDNAME = 'VBELN'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = L_POS.
*X_FIELDCAT-EDIT = 'X'.
X_FIELDCAT-OUTPUTLEN = '10'.
x_fieldcat-ref_field = 'VBELN'.
x_fieldcat-ref_table = 'VBAK'.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
L_POS = L_POS + 1.
X_FIELDCAT-SELTEXT = 'POSNR'.
X_FIELDCAT-FIELDNAME = 'POSNR'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = L_POS.
*X_FIELDCAT-EDIT = 'X'.
X_FIELDCAT-OUTPUTLEN = '5'.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
L_POS = L_POS + 1.
"{FOR DISABLE HERE 6ROW IS DISABLED
SY-TABIX = 6.
LS_EDIT-FIELDNAME = 'VBELN'.
LS_EDIT-STYLE = CL_GUI_ALV_GRID=>MC_STYLE_DISABLED.
LS_EDIT-STYLE2 = SPACE.
LS_EDIT-STYLE3 = SPACE.
LS_EDIT-STYLE4 = SPACE.
LS_EDIT-MAXLEN = 10.
INSERT LS_EDIT INTO TABLE LT_EDIT.
LS_EDIT-FIELDNAME = 'POSNR'.
LS_EDIT-STYLE = CL_GUI_ALV_GRID=>MC_STYLE_DISABLED.
LS_EDIT-STYLE2 = SPACE.
LS_EDIT-STYLE3 = SPACE.
LS_EDIT-STYLE4 = SPACE.
LS_EDIT-MAXLEN = 6.
INSERT LS_EDIT INTO TABLE LT_EDIT.
INSERT LINES OF LT_EDIT INTO TABLE LS_OUTTAB-HANDLE_STYLE.
MODIFY IT_VBAP INDEX SY-TABIX FROM LS_OUTTAB TRANSPORTING
HANDLE_STYLE .
X_LAYOUT-STYLEFNAME = 'HANDLE_STYLE'.
"} UP TO HERE
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY_LVC'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IS_LAYOUT_LVC = X_LAYOUT
IT_FIELDCAT_LVC = IT_FIELDCAT
TABLES
T_OUTTAB = IT_VBAP[]
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
The above code i am modifying the 6 record . you can place your condition.using loop and endloop. you can disable many records/check box also.
Follow the next steps:
1. Add the following fields in the internal table:
checkbox TYPE c,
celltab TYPE lvc_t_styl,
2. Define a table and a work-area:
DATA: wa_celltab TYPE lvc_s_styl,
ta_celltab TYPE lvc_t_styl.
3. Update the internal table BEFORE display :
LOOP AT ta_data INTO wa_data.
h_tabix = sy-tabix.
Update field CHECKBOX (enable/disable INPUT)
REFRESH ta_celltab.
wa_celltab-fieldname = 'CHECKBOX'.
IF NOT wa_data-xxxxx IS INITIAL.
wa_celltab-style = cl_gui_alv_grid=>mc_style_disabled.
ELSE.
wa_celltab-style = cl_gui_alv_grid=>mc_style_enabled.
ENDIF.
INSERT wa_celltab INTO TABLE ta_celltab.
INSERT LINES OF ta_celltab INTO TABLE wa_data-celltab.
Update internal table
MODIFY ta_data FROM wa_data INDEX h_tabix.
ENDLOOP.
4. Define CHECKBOX in fieldcatalog
CLEAR wa_catalog.
wa_catalog-fieldname = 'CHECKBOX'.
wa_catalog-col_pos = 9.
wa_catalog-coltext = 'Checkbox'.
wa_catalog-checkbox = 'X'.
wa_catalog-edit = 'X'.
APPEND wa_catalog TO ta_catalog.
5. Call ALV
CREATE OBJECT h_custom_container
EXPORTING container_name = h_container.
CREATE OBJECT h_grid
EXPORTING i_parent = h_custom_container.
CALL METHOD h_grid->set_table_for_first_display
EXPORTING
it_toolbar_excluding = wa_toolbar
is_layout = wa_layout
CHANGING
it_outtab = ta_kntkn
it_fieldcatalog = ta_catalog
it_sort = ta_sort.
CALL METHOD h_grid->set_ready_for_input
EXPORTING i_ready_for_input = 1.
Regards
vasu -
Check box item visual attributes
Hi,
I set an item visual attributes like below
background color gray15
Font weight demibold
Font style Plain
Font spacing Dense
But when executing the form this check box item does not appear clearly, it is not readable, could you suggest me some visual attributes setting to make a check box item more readable?
Thanks you very much.I think the problem is related to enabled of set_item_property of this item when it is set to property_false, the enabled property_false does not allow the visual attributes setting to display the item more readable, do you have any idea to display the item more readable when enabled is set to property_false?
Thank you very much for your suggestions. -
AET : Check box in personalize setting is not showing
Hi Guys
I'm trying to enable the AET functionality using the option Personalize->Personalize Settings from the header area which is top right side, but there I'm not able to see the check box with option enable configuration mode.
Is any notes is missing? even though there is another option (from navigation bar entry) we can access the AET functionality but the first one is the easiest way to achievet this.
pls adivice what is missing.
Thanks & Regards
RajHello Raj.
Check if you have authorization for authorization object CRMCONFMOD.
Maybe you are looking for
-
App store language ignores what is selected in System Preferences
The app store doesn't appear to honor the language I have set in System Preferences (english). I live in France (but am a native English speaker) and because I only have a French credit card, I must use a French itunes account, which automatically di
-
INVOIC02 mapping needed for MIRO posting
Hi, My requirement is to read inbound invoic02 zsegment fields and populate respective fields for MIRO processing. Basically, I need to post amount against G/L account. Searched on SDN for this issue, but not much help. Could anyone help with user ex
-
Hi all, I am trying to use adobe air 2 beta 2..... and I keep on getting runtime error VerifyError: Error #1014: Class flash.events::StorageVolumeChangeEvent could not be found. 5/10/2010 16:50:09.250 [INFO] org.swizframework.core.mxml::Swiz Dispatch
-
All site definitions gone in DW CS4
I'm using CS4 on a Mac running OS10.5.6. I accidentally removed one site, went into Time Machine and recovered it, then next time I started up CS4 ***all*** my sites are gone -- some 30 sites. I still have CS3 running (I have to support others here a
-
External RAID enclosure is auto unmounting
Just purchased a Mediasonic RAID enclosure to run as an external mirrored hard drive. I inserted both new (and identical) 1 TB HDD's in the enclosure and used OSX's disk utility to set up the RAID. Now when I connect the enclosure via USB2.0 two thin