Re:Push notification error when publishing a new folio from DPS

I have run into a problem when publishing a new folio to our app from DPS Folio Producer. I published the new folio without a probelm, but when I pus the "Notify" button, I get an error message that an error has occured while sending the push notification. The push certificate has expired and that to upload a valid push notification, I should rebuild my app in DPS App Builder and to retry sending push notification. (See screen grab).
This is our first push notification for a recently approved app. I worked through all the instruction to create push notifications through DPS. And we tested everything and it was fine.
Our app is a free subscription, multi-folio app in newsstand hosted on the DPS server with DPS push notifications.
What am I doing wrong? I really don't want to have to bebuild/resubmit the app to iTunes to get this to work. It seems odd that the push certificate would be expired, we just created it last month.
Thanks!
Running most recent DPS version on a MAC OSX 10.9.2

Hi,
Direct saves to the server from MS Office over Webdav are not recommended when the versioning mode is Manual. The reason is that the actions of checking out & checking in the document need to be done from the Team Collaboration client and are not done from within MS Office.
Rather, set the versioning mode to Auto or Disabled and it should work just fine.
Thanks,
Jay

Similar Messages

  • Push notification error

    One of my folios does throw an error, when trying to notificate via the notification button on digitalpublishing.acrobat.com.
    It is one of 4 folios published as commerce/public. The notification service worked fine with 3 of the folios, but the last one sais:
    "Error sending the notification.
    Folio is not ready. Please try again in a few minutes."
    Beim Senden der Benachrichtigung ist ein Fehler aufgetreten.
    Das Folio ist nicht bereit. Versuchen Sie es in einigen Minuten erneut.
    I've been trying this now for over 24 h every couple of ours, and I don't see any notification arrive nor does this error message disappear.
    Does anyone have experience with this error and any hint or help?
    Thank you vermy much in advance.
    Richard

    I don't think that these problems re directly related. A 1024x768-Folio with dual orientation, but just one layout did correctly accept the push notification. The 2048 folio with dual orientation and and a single layout did not.
    I just meant, that by having to reproduce both of the folios again anyway, to solve the dual orientation/single-layout-problem I hope to solve the push notification error on the go.

  • Window error when publishing Muse change, can't pubish page update

    Window error when publishing Muse change, can't pubish page update. Any suggestions?
    It happens after I updated my website payment page with a new Paypal html. That html is below with x's put in to the code. Why doesn't Muse or Windows like this code in Muse?
    <script type="text/javascript" data-pp-pubid="9xxxxx6cec" data-pp-placementtype="540x200"> (function (d, t) {
    "use strict";
    var s = d.getElementsByTagName(t)[0], n = d.createElement(t);
    n.src = "//paypal.adtag.where.com/merchant.js";
    s.parentNode.insertBefore(n, s);
    }(document, "script"));
    </script>

    Window error when publishing Muse change, can't pubish page update. Any suggestions?
    It happens after I updated my website payment page with a new Paypal html. That html is below with x's put in to the code. Why doesn't Muse or Windows like this code in Muse?
    <script type="text/javascript" data-pp-pubid="9xxxxx6cec" data-pp-placementtype="540x200"> (function (d, t) {
    "use strict";
    var s = d.getElementsByTagName(t)[0], n = d.createElement(t);
    n.src = "//paypal.adtag.where.com/merchant.js";
    s.parentNode.insertBefore(n, s);
    }(document, "script"));
    </script>

  • Error when Publishing a CCM Catalogue

    Hello,
    When publishing a new CCM Catalogue we tend to get the following message in production but not in our UAT system:
    "Error when deleting TREX metadata for Catalog". It often takes 3 goes at publishing before it is successful.
    Has anyone encountered this or know why it's happening?
    Thank you,
    Kind Regards,
    Jackie

    Hi Jackie,
    It generally refers to an issue with the TREX engine directly, perhaps the trex engine is under-resourced or used by too many applications via the same port.
    Check the transaction TREXADMIN for any evident errors in there which may explain the problem.
    Regards
    Jason

  • Error when publishing to file

    i keep getting "an unknown error" when publishing to file or publishing all to mobileme...
    It still works if i just publish to mobileme.
    Any ideas?
    Im trying to get my site going on go daddy, and kinda really need it in a folder...

    If you are still getting the error then its likely that you have a corrupt domain file.
    To prove this, quit iWeb, create a new folder on your desktop and drag your domain file out of - Home Folder/Library/Application Support/iWeb - into this.
    Relaunch iWeb to force it to create a new domain file, add some content and try publishing to a folder.
    If this works, your original file is corrupt.

  • SharePointDesigner - Error when publishing a workflow

    Hi.
    When i´m publishing my workflow, sharepoint designer rises the following exception:
    "Error were found when compiling the workflow. The workflow files were saved but cannot be run." - "Unexpected error on server associating the workflow."
    The workflow is really simple; i used some custom activities (to read details from an attached excel document) and then i have to do many checks and about 12 approvals.
    I have recreated the workflow and it seems that adding the 7th approval creates this error; when publishing with 6 approvals everything is fine.
    My Question: What is the error, where can i find more information regarding this issue, maybe it´s a bug in designer? Are there any known workarounds that can help? I really need so many approvals :-)
    Is there a way to split the workflow in 2 or 3 parts, that can do the "job" of the big one?
    I´m using Sharepoint Server 2010 with the current SPD (-> Microsoft Information Worker VM).
    Thx for help

    I finally found a solution how to solve this issue:
    In the web.config file of the current site collection (where i was publishing my workflow) i have appended a timeoutvalue for my requests:
    Old entry: <httpRuntime maxRequestLength="51200"/>
    New entry: <httpRuntime
    maxRequestLength="51200"
    executionTimeout="300"
    />
    This will give my workflow some more time to publish!
    Source: http://www.manjuke.com/2011/05/fixed-sharepoint-designer-error.html

  • TS1702 I have installed "Runkeeper" on my iPhone 5. when it starts, it says "connect to iTunes to use push notifications". When I push  "OK" the notification returns immediately and locks the phone. Help

    I have installed "Runkeeper" on my iPhone 5. when it opens "connect to itunes to use push notifications" appears. when "OK" is pressed the notification returns immediately and keeps reappearing. the phone at this point is locked and only a reboot will close the app.

    I think software on the unit has likely been damaged and needs to be reinstalled, so restore as new will be needed.

  • 404 error when publishing to FTP server.

    I'm getting the 404 error when publishing my iWeb site to my FTP server.  Please help.
    It says I have a good connection and publishes but then I get the error when I "Click to go to the site."  I've read where I have to upload the file to my server but with the file index_html.  Do I rename my iWeb file, domain, to index_html?

    I'm getting the 404 error when publishing my iWeb site to my FTP server.  Please help.
    It says I have a good connection and publishes but then I get the error when I "Click to go to the site."
    A 404 errors means the file is not on the server.
    Checking the connection is just testing the FTP connection.
    I've read where I have to upload the file to my server but with the file index_html.  Do I rename my iWeb file, domain, to index_html?
    Do I rename my iWeb file, domain, to index_html?
    No, you don't. The domain file is where iWeb  stores its assets. It stays on your computer. It has no meaning outside it. iWeb publishes the index.html file and all the other files.
    Read this : The concept of iWeb Sites
    So if your pages do not load, check for their presence on the server.

  • Runtime Error when creating a new group

    I'm getting a runtime error when creating a new group on a site collection? 
    Thanks in advance

    The most possible reason is if your site collection is reached the maximum site quota limit,then there is chance to get the run time error while creating a new group.
    In this case,you will get the error while creating/updating the group or while adding the new user/uploading any content.
    Also Ensure the group name is not having any special/unsupported characters.
    Feel free to share the error screenshot/entry in the ULS logs.
    Please remember to click 'Mark as Answer' on the answer if it helps you
    Best Regards,
    Pavan Kumar Sapara
    s p kumar

  • Java Error When Publishing

    So I have an applicational prototype that I need to have out by the end of the day today, and all of a sudden Flash Catalyst states that the project cannot be published due to an error. It also said to check the Code view to see what's wrong. Yesterday it did say that the error was a "Java Heap Space" error, but today there is absolutely nothing in the problems listing even though it still outputs that there's an error when publishing the project.
    The prototype builds and runs in the browser just fine, but it's publishing that becomes the problem. I am not a Flex developer by any means, but as a user experience designer, I understand how to edit some of the coding, so if anyone could shed some light on this, I will do my best to fix the problem with any solutions that will work.
    I appreciate the help guys!
    -- Rick

    To the original poster, Rick:
    If you're seeing a "Java Heap Space" error message, this is a (not very user-friendly) way of the program telling you it's running out of memory.  Catalyst tries to detect and warn you when your project is getting too large, but it's not always perfect.
    Did you see any warnings about the size of the images you've imported into your project?  Very large images can certianly be one source of problems.
    Here are a few tips for dealing with large images:
    Resize them to be smaller using a another app like Photoshop, before you import into Catalyst.  Shoot for a file size of 100-300 KB at the most, for very large "gallery"-style photos.  Other images should be < 100 KB (remember, people viewing your site will have to download all this).
    In Catalyst, when you're done shrinking down an image to the right size, choose Optimize Artwork > Rasterize in the heads-up display to "lock in" the smaller size.
    In Catalyst, choose Optimize Artwork > Convert to Linked Image for any especially large photos.  This can speed up the initial load time of your site, and it will also help avoid memory problems when publishing.
    Hope that helps!
    - Peter

  • WorkFlow Error when publishing

    Hello, 
    I am having errors publishing workflows. This was working and all of a sudden stopped. From the error message I am taking it as a permissions issue? 
    Here is the code it spits out: 
    System.InvalidOperationException: Operation failed with error System.UnauthorizedAccessException: Attempted to perform an unauthorized operation.
    at Microsoft.SharePoint.SPAppPrincipalManager.GetManager(SPWeb web)
    at Microsoft.SharePoint.WorkflowServices.SPWebWorkflowSecurityContext.EnsureAppPrincipal(SPWeb elevatedWeb)
    at Microsoft.SharePoint.WorkflowServices.SPWebWorkflowSecurityContext.<SetupApplicationEcosystem>b__3()
    at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<Run
    Anyone have any thoughts? This happens with all sorts of workflows, even basic ones as shown in the above example!
    Thanks,
    Will 

    Hi,
    For your issue, Re-register the workflow service using command:
    Register-SPWorkflowService -SPSite 'https://myhost/mysite' -WorkflowHostUri 'https://workflowhost' -AllowOAuthHttp -Force
    Reopened SharePoint Designer again and test again.
    Here are similar posts, you can use as a reference:
    https://social.technet.microsoft.com/Forums/en-US/61b2cfad-355d-4a43-8dd6-7d6813cd1b2f/sharepointdesigner-error-when-publishing-a-workflow?forum=sharepointcustomizationprevious
    http://sp2013.pro/2013/04/solution-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run-cannot-set-unknown-member/
    Best Regards,
    Lisa Chen
    Lisa Chen
    TechNet Community Support

  • I getting error when connecting my new iPod in my car. Getting error that usb is not recognized.

    I getting error when connecting my new iPod in my car. Getting error that usb is not recognized.

    Not all car systems are compatible with the iPod touch.  Does the documentation/website for the car system say it is compatible with an iPod with iOS 5?

  • ADF Mobile: Push Notifications error

    Hello All,
    JDeveloper: 11.1.2.4.0
    Build JDEVADF_11.1.2.4.0_GENERIC_130421.1600.6436.1
    I am attempting to run a simple ADF Mobile app that uses push notifications. I used the Project ID from the Google APIs dashboard as the return from LifeCycleListenerImpl.getSourceAuthorizationId(). Firstly, the JavaDoc at http://docs.oracle.com/cd/E37975_01/apirefs.111240/e27204/toc.htm doesn't list the PushNotificationConfig interface (or other push related classes). 
    Testing this on an Android 4.2 device, I see an INVALID_SENDER error logged by the GCM service. Further down I also see the following:
    "06-12 16:16:02.425: D/CVM(8635): [SEVERE - oracle.adfmf.framework - GenericInvokeRequestHandler - invoke] Unresolved class / method: oracle.adfmf.framework.pushnotification.internal.NativePushNotificationEventInterceptor / receivedToken"
    Any ideas if I am doing something wrong here?
    Regards,
    Bijesh

    HI, the JavaDoc did not get into the release unfortunately.   It is being added to the next Patch release.  In the mean time, you can find a copy of the JavaDoc in the latest article on http://blogs.oracle.com/mobile, which covers Push Notification. 
    Thanks,
    Joe Huang

  • Adobe Captivate 6 Error when publishing

    Help!  I having trouble publishing a training that my employees can view.  When they open the project they are getting the first image here that is essentially blank.  I have attempted to reduce the size and save to different folders etc. but nothing seems to work. 

    Hi there,
    Could you tell me the complete version of Captivate (Help > About Adobe Captivate).  6.0.1.240
    Which version of Adobe Reader or Acrobat are they using?  Adobe Reader XI
    Can you publish this locally on your system (not to network drive directly), check force republish option also, and are you able to view it on your end?  I can pull up the file from my computer that is saved in the same drive that the agents are attempting to pull up.  But, I am not sure if it is viewing for me because I have it on my system.
    Re: Adobe Captivate 6 Error when publishing
    created by Varun Kalra<http://forums.adobe.com/people/Varun+Kalra> in Adobe Captivate - View the full discussion<http://forums.adobe.com/message/5855412#5855412

  • My phone keeps getting an error when downloading the new ios

    Even when i connect to itunes i keep getting an error when downloading the new os.  I have made 11 attempts.

    download is corrupt.  I finally solved it.  I had changed my password on my appleid and had not updated it in my phone.  After i got the same error on 3 different desktops i decided the error was in my phone and updated all my settings and the update worked the first time. 
    Thanks for your interest

Maybe you are looking for