Re: Qosmio F20-137 - After I installed Windows 7 I got no sound
I have Installed Windows 7 on my Qosmio F20 and all drivers were installed by windows update after I connected to Internet.
I can play musik and videon files in Windows Media player but there is no sound in the inbuilt speakers or if I connect headphones.
If I look on the driver for the sound in devicemanager it says everything is OK. Does anyone know what the problem is?
I have also reinstalled Windows 7 but still same problem.
Regards,
Henrik
> I remeber that I muted/disabled the sound in Windows XP before I isntalled Windows 7
This could be a problem!
I think you would need to install the Win XP and would need enable the sound again (unmute). After that you could install the Win 7 again.
I found also this Toshiba document:
http://aps2.toshiba-tro.de/kb0/TSB7C021B0001R01.htm
Maybe it will work for you if not follow the advice above.
Similar Messages
-
My ipod nano is no longer recognized by itunes after I installed windows 8.1. The ipod nano still is recognized and works with a Windows 7 computer
Hello, Pete.
Here is an article I would recommend going through when an iPod is not recognized by iTunes or the computer.
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Usually the resolution is updating the Apple Mobile Device Driver. See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H. -
How can I set to boot from MAC OS by default after I installed Windows?
How can I choose to boot from MAC OS by default after I installed Windows? I have a MacBook Pro Leo 10.6.8. I used bootcamp to install Windows XP SP2, but now if I don't press the option key it will start up with Windows, and I don't want that. Thanks for any help.
Select it in the Startup Disk pane of System Preferences.
(61137) -
After i install window 8.1, i can't see window icon in my start up disk, i see only mac icon 10.10, but i can see both mac and win icon in my window boot camp control. i want to see window icon in my mac Yosemite 10.10.2,system preference, start up disk.
Third-party NTFS software interferes with the Apple NTFS drivers, which control whether you can see the Bootcamp partition in the Startup Disk option. As a test, can you uninstall all third-party NTFS software and check System Preferences -> Startup Disk?
-
On my iMAC using Mountain Lion v. 10.8.3, is there a way to increase the size of my Boot Camp Partition after I installed Windows 8? Thanks.
Yes, purchase Paragon Camp Tune for the job.
-
Mac OS X Leopard installation disc after I install Windows Vista
Hi everyone! Do I need to put my Mac OS X Leopard installation disc after I install Windows Vista? I try to run the windows without install Mac-specific driver for windows but it restarted and back to Mac OS. The frustrated thing is I did not bring my Mac OS with me. Anyone has any solution? Or how can i request a installation disk from Apple? Thank you!
Hi everyone! Do I need to put my Mac OS X Leopard installation disc after I install Windows Vista? I try to run the windows without install Mac-specific driver for windows but it restarted and back to Mac OS. The frustrated thing is I did not bring my Mac OS with me. Anyone has any solution? Or how can i request a installation disk from Apple? Thank you!
Yes you will need to install the apple drivers for win vista. When you boot from a cold start, have you tried holding down the option key to choose which OS to boot from? If you have then, you could try going into startup options from the mac side and choose win vista if it appears. That could be risky though, as you mentioned you do not have the mac install disk. If problems arise you may need the mac install disk to undo the changes. -
Beats audio software missing after I installed windows 8.1
Beats audio software missing after I installed windows 8.1
my laptop: HP pavilion p011svHi @Boukou ,
Thank you for your inquiry.
I understand that after updating to Windows 8.1 you no longer have the Beats Audio software.
You should be able to download an updated audio driver from HP Pavilion 15-p011sv Software & Drivers page .
This should reinstall your Beats software.
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
After re installing OS x I got following information as I want install IPhoto. These apps cannot be accepted on this computer.
The answer was authorization codes. It took three phone calls, several emails to Apple Tech support (after I purchased the $160 applecare plan) to get them. Note, I had to call back after four days, the first Senior Advisor simply disappeared and refused to respond to emails or phone calls. The next Senior advisor spent the weekend looking for the first advisor, then scheduled a phone call to tell me he would begin looking at the issue. When I asked he specficially discounted the authorization codes:
"I don't know if issuing a redeem code for iPhoto is an appropriate resolution for your issue. Since, I don't have the ability to issue any redeem codes for the Mac App Store, I am still waiting to hear back from Sean, the previous agent you were working with, regarding any status he has about your issue."
Three days after that...here are your codes. Note a restart is necessary to properly get the iLife apps to update, now through the App Store.
Also, this is the second issue where I have lost contact with a Senior Advisor and had to restart the process. Standard procedure? -
Satellite A200-137 - Can not install windows after hard disk crash
last week my a200-137 crashed and now i have new hitachi 500 gb hdd on it, same as before the crash.
I install with Toshiba recovery DVD windows Vista on it and after succesfull install i have to start windows, it says preparing windows for first use then i have to wait a moment and then i get the message that windows installation is not completed. But it is complete!
After trying for 3 times installing with recovert I tried to install windows xp.
After a couple of minutes and transering files, I get the message no disk found! It says that there is no hard disk on the laptop!
But when I start up the boot menu or the setup menu I can see the 500 gb Hitachi hard disk!
So why can windows not find the hard disk and why can I not start windowds visat after installing with the recovery dvd?> So why can windows not find the hard disk and why can I not start windowds visat after installing with the recovery dvd?
On this virtual way it is not easy to say why you cannot install recovery image. It would be interesting to know if the same will happen when you replace HDD with the same or identical one.
Which capacity has had original HDD?
If possible try to obtain original Microsoft installation disc and check if HDD will be recognized by Vista or Win7 and of course if you will be able to install and start preinstalled OS.
About WXP installation: it is well known that WXP installation will not starts properly due to missing SATA driver that must be loaded before WXP installation starts.
Check this forum and you will find hundreds of threads with detailed explanation why this happen and what can you do about it. -
Some issues after clean installing windows 7 pro 64bit
Hi,
I have a couple of issues, I clean installed windows 7 pro, 64bit, (vanilla) restored my license with ABR and used system update to download all the drivers. (no issues until here) But after restarting the system, I found this issues:
1. I have to put the bios in legacy mode for system to boot. Otherwise it gives me a "no operating system found" message. Is there any way to make a proper installation for the system to boot in UEFI and LEGACY?
2. System update didn't install thinkvantage center. (the program that stays in the taskbar). Should this be installed manually? Or system update should have installed it?
3*. I can not use lenovo driver page of my x120e. In IE it shows me repeatedly the wizard to choose my model, although I enter the correct info there. It starts all over again and again. Tried opera, I can see the drivers page, but I can't browse, or expand none of the sections. (all I can think of this, do I need java for the page to work?)
3*. UPDATE: After installing IE 9, java and flash player, still not working. Opera too. Google Chrome works fine. What's the matter with IE and OPERA? What component do I need to make IE work with lenovo drivers download page?
Can anyone help me? Never had to deal with these issues.
Thanks in advance
I'm just a volunteer. I like to help others where I can. Do my ideas work? I hope so. o_O
Who helped you today? Do not forget to thank him.
My hardware: TP x120e 0596-2ru. Windows 7, sp1, 64Bit, English, installed in UEFI mode.Hello,
Have you tried wiping the hard disk drive and reinstalling Windows 7 Professional x64 from the factory recovery discs while the BIOS is set to UEFI? If so, did that work?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество -
HT1349 After installing windows 8, I have no sound on my mac desktop. Need help?
Hi,
I recently installed Windows 8 and after the installation there is no audio (sound) in my iMac. I can't hear youtube videos, mp3 files, no nothing.
Suggestions to solves this problem?As you sure that you don't have system sounds muted? If you have sound in the music app, then system sounds are muted.
If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085 -
After I installed windows 8.1 on mac
hi guys. I just installed windows 8.1 professional on my macbook pro mid 2012. after I installed it and i run windows 8, when Im trying to install the drivers that I've already downloaded on my flash memory from bootcamp, yet I could not find it I just found the folders and it is empty. I did download it again and I made sure they are fully completed before I switch to windows 8. Also i got the same thing
Did you allow Bootcamp Assistant to download the drivers or did you download them manually?
For Mid 2012 MBPs the drivers are Boot Camp Support Software 5.1.5621. These can be directly downloaded to a USB, unzipped and installed using the setup.exe file in the Bootcamp folder.
System Requirements
MacBook Air (11-inch & 13-inch, Mid 2011)
MacBook Air (11-inch & 13-inch, Mid 2012)
MacBook Pro (15-inch & 17-inch, Mid 2010)
MacBook Pro (13-inch, & 15-inch, Early 2011)
MacBook Pro (17-inch, Early 2011)
MacBook Pro (13-inch,15-inch & 17-inch Late 2011)
MacBook Pro (13-inch & 15-inch, Mid 2012)
MacBook Pro (Retina, Mid 2012)
MacBook Pro (Retina, 13-inch, Late 2012)
MacBook Pro (Retina, 13-inch and 15-inch, Early 2013)
Mac Pro (Early 2009)
Mac Pro (Mid 2010)
Mac Pro (Mid 2012)
Mac mini (Mid 2011)
Mac mini (Late 2012)
iMac (27-inch, Mid 2010)
iMac (21.5-inch & 27-inch, Mid 2011)
iMac (21.5-inch & 27-inch, Late 2012)
iMac (21.5-inch) Early 2013
Windows 7, Windows 8, and Windows 8.1, 64 bit -
My wireless card does not work after re installing windows 8 !!
I suppose my card manufacturer is realtek and my card driver is gemtek my network adapter driver I've downloaded and installed it my nothing happens. In my device manager there is no wireless card please help me!!!!!!
My system says no wireless card detected my PC was dos based and when I installed windows 7 everything just went fine. After some days it was formatted and again I installed windows 7 ultimate but my wifi adapter and card was not in the device manager. Please help me!!my pc is lenovo c320 aio
intel g630, 2gb ram, dvd r/w, realtek gbe ethernet controller, usb 2.0x5 ports, keyboard and mouse -
Howdy,
I installed Windows 10 Technical Preview with original language settings for the US region.
No that I need my Windows localized to Espanol - Spanish.
I type "language' in Cortana, select Add language to this device and click Add a language on the Region & language.
Then I select added language and click Set as primary.
After the restart I see that while Windows Explorer is displayed in Spanish, Start menu is displayed in English (including app sections such as Explore Windows), as well as Modern apps that have retained their English names (such as Mail).
I even set the location to Spain in regional settings (although I didn't like the idea, as I want to browse the US market). To no avail.
How do I change the language of the Start menu and modern apps?
Thank you.
Well this is the world we live in And these are the hands we're given...Okay, I ran the in-place upgrade and it worked!
What I did:
1. Downloaded and attached Espanol edition of Windows Setup ISO.
2. Started setup.exe from that ISO.
TIP: If need be, you can downgrade your installation of Windows 10 Enterprise Technical Preview to Windows 10 Pro Technical Preview by changing two registry values, EditionID and ProductName. You may use the following registry file on Windows 10 Enterprise
Technical Preview:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion]
"EditionID"="Professional"
"ProductName"="Windows 10 Pro Technical Preview"
Import these settings into registry and start setup wizard from the Windows 10 Pro Technical Preview setup CD. Voila! Windows will offer upgrade of your current setup of Windows 10 Enterprise Technical Preview to Windows 10 Pro Technical Preview with
saving all your settings and applications!
The only thing that wasn't localized are the new app sections. I still see Explore Windows and Everyday apps. Probably, these UI strings haven't yet been translated.
Well this is the world we live in And these are the hands we're given... -
Iphone sync after re-installing windows XP
Hello and thank you in advance for any help. I've searched the community and found similar questions but not exactly what I'm looking for.
My only computer is an old Dell that runs windows XP SP2. I am planning on reformatting the hard drive and re-installing windows once I get this question resolved, ideally today.
I have backed up all of the "my documents" folder to my external drive. That includes the iTunes folder, but I also permanently keep a lot of my iTunes library on the external because my PC's hard drive is very small
I have the new iOS and regularly back up to iCloud
I understand the advice is generally to back up your itunes library.
-How much of the iPhone's data is backed up in that process?
-How do I retrieve that data once I've reformatted?
-What steps do I need to take to make sure that data is retrievable via the external hard drive?
I'm most concerned about all the apps, bookmarks, settings, application data, text messages, etc.
I just want my phone to be normal and able to sync with as little headache as possible.
Thanks so much!Being a little more specific and succinct I suppose I could have just said:
What do I need to do before and after a windows reinstall so that I can be able to sync my iPhone again without losing any data or after to reinstall apps, etc?
Thanks
Maybe you are looking for
-
Where can I download Adobe acrobat 9 startdard? My Adobe Acrobat 9 stardard Cd is not reading.
Where can I download Adobe acrobat 9 startdard? My Adobe Acrobat 9 stardard Cd is not reading.
-
Initial password change requested with SSO
Hi all, we have well working SSO with EP6 SP2 and standalone ITS. SSO is based on SAP logon ticket. Only one annoying thing appears. If a new user is created in SAP R/3, ITS asks for changing of password. Does it mean that the user must initially (an
-
COMPLAINT: Nonexistent customer service for hacked iTunes account!
Since I couldn't find a "Customer Service" forum, and there is no useful email address, support form or phone number to address this issue, I'm posting this here where I hope someone can actually help. My wife's iTunes account was compromised within
-
I'm fairly new, so please forgive me if there is a simple answer to my question. I converted the files from my camcorder to edit them in FCE. While I had seamless recording, the camcorder split my footage up into two files. When I put the two files t
-
I purchased Adobe Photoshop Lightroom5 at Best Buy when I try to register I cannot
II purchased from Best Buy Photoshop Lightroom 5 and when I try to install the redemption doce i am told is invalid but it is the code on the box