Re: Qosmio F60 - After sleep/locked computer, my Wi-Fi is not working anymore

Hey guys,
on my Qosmio F60, the wifi is making crazy stuff. After the PC is going to sleep, I shut the panel or make it hybernate, it is not anymore willing to connect to any network. I have to do one of the 2 things:
go to adapter settings, stop the adapter service and then restart it or
restart the PC
I have a realtek RTL 8191SE Wireless LAN 802.11 n PCI-E NIC, I have already updated the driver for windows 7 from the toshiba website and still this problem remains...
Any clues what to do?
Thanks,
Miroslav

No does not work, I have the latest updates of both now, Bios and also the wifi adapter from our toshiba support site and still does not re-connect after being down...So I have to sadly disable and then enable the adapter device to be able to work on the web :((
any more suggestions? It is still in warranty, but I need to work with it daily, so could be available for a part of the weekend only for maintenance :((
Need help here really badly!

Similar Messages

My ipad mini is totally drain and after plug it to regain the power its not working anymore.can somebody knows how to make my ipad work again

my ipad mini is totally drain and after plug it to regain the power its not working anymore.can somebody knows how to make my ipad work again

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

My 16 months old MacBook Pro just got out of battery and turned off in the normal way in this cases. After conecting it to the electricity, I turned it on again and then after restoring the sistem went off and its not working anymore!!!

I tried pressing at the same time ctrl shift comand keys to reset it and then when I try to turn it on again it just starts the screen blinks and the hard drive sounds briefly but then it dead, if you close the mac then the light that glows when is sleepeng turns on and the computer gets hot and the fans turns on and it´s stopped when the battery is dead again.
Please help its incredible, it´s my 3 mac and I never experienced this before.

Thanks Sig. The information is here: Anything useful stand out?
Battery Information:
Model Information:
Serial Number:    9G1130CJVD3MA
Manufacturer:    DP
Device Name:    bq20z451
Pack Lot Code:    0000
PCB Lot Code:    0000
Firmware Version:    0201
Hardware Revision:    0002
Cell Revision:    0158
Charge Information:
Charge Remaining (mAh):    5663
Fully Charged:    Yes
Charging:    No
Full Charge Capacity (mAh):    5663
Health Information:
Cycle Count:    59
Condition:    Normal
Battery Installed:    Yes
Amperage (mA):    261
Voltage (mV):    12574
System Power Settings:
AC Power:
System Sleep Timer (Minutes):    10
Disk Sleep Timer (Minutes):    10
Display Sleep Timer (Minutes):    10
Wake on AC Change:    No
Wake on Clamshell Open:    Yes
Wake on LAN:    Yes
Current Power Source:    Yes
Display Sleep Uses Dim:    Yes
Battery Power:
System Sleep Timer (Minutes):    10
Disk Sleep Timer (Minutes):    10
Display Sleep Timer (Minutes):    2
Wake on AC Change:    No
Wake on Clamshell Open:    Yes
Display Sleep Uses Dim:    Yes
Reduce Brightness:    Yes
Hardware Configuration:
UPS Installed:    No
AC Charger Information:
Connected:    Yes
ID:    0x0100
Wattage (W):    60
Revision:    0x0000
Family:    0x00ba
Serial Number:    0x00262704
Charging:    No

After sleep, retina MacBook Pro (Mid 2014) does not recognize usb connected mouse movement

After sleep, retina MacBook Pro (Mid 2014, on 10.9.4) does not recognize usb connected mouse movement. I have tried a generic usb mouse and my Razer Deathadder usb mouse. Both mice work before sleep; but after sleep, the computer no longer recognizes mouse movement while still recognizing the mouse buttons when pressed. Any idea why this is occurring?

Hello, chocotac0.
Thank you for visiting Apple Support Communities.
Here are some troubleshooting steps that I would recommend when experiencing this issue.
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
OS X Mavericks: If a USB device isn’t working
http://support.apple.com/kb/PH13876
Cheers,
Jason H.

IPAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore

PAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore. Just get an Apple Logo then a flashing blue screen as if it is caught booting up. This has happened twice before and iTunes restore fixed it. But this time device not appearing in iTunes.
Running iTunes for PC. But as stated restore has worked before! Any help greatly appreciated!!

Place the device in DFU mode and let iTunes restore the device to factory condition.

Why my iPad 4 become very lag after upgrade to iOS 8.0.2 and not sensitive anymore when press the keyboard and programs it didn't respond when I type the word using the keyboard fast it lag until I cannot locked or switch off the phone

Why my iPad 4 become very lag after upgrade to iOS 8.0.2 and not sensitive anymore when press the keyboard and programs it didn't respond when I type the word using the keyboard fast it lag until I cannot locked or switch off the phone

Same issue here both with my iphone 5S as well as my iPad2. THe sync to my macbook air does not complete and it shows a large overcapacity level when connected, but once I disconnect there is plenty of room (4 GB) available, not a 20 GB overage.

After last update the split keyboard option is not working and side switch button option works opposite for mute and rotation lock

After last update the split keyboard option is not working and side switch button option works opposite for mute and rotation lock.

Hi
A long story about your issue... I think the reason of this is why you have deleted some registry keys. If you delete something in the Windows registry you should really know what you do. You can damage the complete Windows system!
So I think this is the reason why the keyboard doesnt anymore.
In the user manual I have founded that the CD-ROM booting option is only available with optional optical disk drive.
So for me it sounds like that your USB CD drive is not compatible to the notebook

After ram upgrade automatic sleep is not working anymore

Some days ago I installed a second 1GB ram module in my 20" Intel iMac. After this I noticed that the automatic sleep do not work anymore. The display turns off but the iMac not. The iMac makes sounds like he wants to do to sleep but could not.
I tried everything I could find... delete OS X powermanagement prefs, run Onyx, reset the SMC.
Do anyone have an solution for this?
Thanks

Does your iMac recognize the new memory module?
Yes.
You might try reseating the module in its slot, and it
would not be a bad idea to run Hardware Test from
your install/restore DVD, just to be sure there is
not an underlying hardware problem.
Already done - no problems reported
Is your new memory module of the same specifications as the
stock module?
Yes it is the same, I had a look on this before I bought it because I wanted to use the dual-channel mode.
Also, what are your settings for sleeping your iMac?
5 min to sleep display, 10 min to sleep the mac
One other thing you may wish to
try is updating your system of OS X 10.4.6 (your
profile indicates that your a running 10.4.5).
Was updated to 10.4.6. I just forget to change the forums pref
I more thing to mention when I start the sleep mode manually everything is fine. I also tried to disconnect all external USB/Firewire hardware and tried it with a fresh mac os install on my USB HDD.
Nothing helped.
Thanks

Anyone had issues with on/off sleep button not working anymore

Anyone had issues with on/off sleep button not working anymore?

If there is Warranty or AppleCare make Genius reservation or set up Service and take or send to Apple for resolution. If no coverage, use virtual Lock Button, tap Settings App > General > Accessibility > Assistive Touch > ON > tap new white screen button > Device > Lock Screen. This can even turn OFF iPhone. To turn ON, connect iPhone to power, charger or USB of computer.

My lock button on my ipod touch doesnt work anymore

My lock button on my ipod touch doesnt work anymore please help it works fine otherwise well and the battery is all the sudden dying really fast and these 2 problems started at the same time.

- When you depress the button does it feel like it is working? Could something gotten in the space and jammed the button?
- Can you reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Have you tried restoring the iPod from backup via iTunes on your computer.
- Next would be to restore the iPod to factory defaults/new iPod
- Last, make an appointment at the Genius Bar of an Apple store.

TV does not work anymore on Qosmio G10

Good morning,
TV does not work anymore, may be due to an update. It has been working OK before.
When selecting TV option 'TV direct ' with MCE menu, I get the following error message: "necessary files for video display are not installed or do not work properly, restart MCE or the computer". Restarting MCE and / or G10 does not solve the problem.
-Intervideo WinDVD creator is installed.
-TV PCI tuner seems to work properly (as per hardware status)
Which files can be missing? What needs to be done?
Any help, suggestions, well appreciated.
Thank you to anyone answering this message.

Hello Luciano
Like you know on this way it is not easy to give you precise answer because we dont know what did you done exactly with your Qosmio.
Please try to use System restore tool at first and roll back the operating system to earlier time. Maybe this will help you and the MCE configuration will be as before.
Try it at first.

HT5622 Why is my Apple ID or password not working anymore after I reset my password?

Why is my Apple ID or password not working anymore after I reset my password?
It keep asking my password... I have reset it, then, when I enter the new password, it's not accepted...

Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

After updating my iPhone 4 to iOS7, the controls on the headset are not working anymore. However, the controls are working on my friend's iPhone 5. Is this a common issue?

After updating my iPhone 4 to iOS7, the controls on the headset are not working anymore. However, the controls are working on my friend's iPhone 5. Is this a common issue?

ofel wrote:
After updating my iPhone 4 to iOS7, the controls on the headset are not working ..
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

After upgard to IOS7 mic of ipad2 is not working

after upgard to IOS7 mic of ipad2 is not working,

Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

HT201401 Hi.. My Iphone acts as if it is dead. Tried a lot with Sleep +home buttons as well, but did not worked. When it is plugged in, keeps on charging with a regular beep. Please advise.

Hi.. My Iphone acts as if it is dead. Tried a lot with Sleep +home buttons as well, but did not worked. When it is plugged in, keeps on charging with a regular beep. Please advise.

Yes, I understand that. But The screen issue is not a result of user damage. The phone was not dropped when the screen got cracked. My daughter was standing in a chair at the table and dropped one of her toys onto the bottom of the phone and cracked it right by the home button. (Nowhere near the LCD/digitizer flex cables, connections, or logic board components) then a few months later my phone had died, I plugged it in, it showed it was charging, then Apple logo disappeared and screen didn't work. AFTER contacting Apple about the issue and them telling me that it "is a result of the very minimal crack to the sheet of glass that has no relation to the LCD or Digitizer and that the warranty does not cover it I had taken it upon myself to change the LCD/digitizer to no avail, as well as backlight ic and backlight coil to no avail. But how do I go about letting Apple know that it is in fact NOT due to the cracked screen nor is it due to the flex cable connections? I can't. So the lady that works the call center phones trying to "convince" me that she knows what she is talking about and "convince" me that it is from the cracked screen I have to take her word because I can't show Apple that its not because of that without paying them $199 to fix the screen in which case they will just send me a new phone rather than fix the faulty hardware under warranty.

Re: Qosmio F60 - After sleep/locked computer, my Wi-Fi is not working anymore

Similar Messages

Maybe you are looking for