Re: Qosmio F750 EasyControl Volume bar - illuminated or not?

On the EasyControl panel between the two volume adjustment buttons (+ and -) is a strip of the volume level. It is illuminated, glowing or it is just a innactive figure? What is it for?
On promo pictures i saw it glowing
For example [here|http://imageshack.us/photo/my-images/534/g2qosmiof750.jpg/] or [here|http://imageshack.us/photo/my-images/571/siqosmiof750completecon.jpg/]
But on my Qosmio it is dark, no action or light - [picture|http://imageshack.us/photo/my-images/846/toshiba3dnotebookqosimo.jpg/]
How does it really should work?
P.S. The same question is about the Mic logo, on the front near Card and battery lights.
Is it just a logo?
Thnx to all

As far as I know just or + will illuminate.
T is OK how it works on your Qosmio.
The same principle is on all other notebooks including my P500.

Similar Messages

Pavillion DV9005US missing green volume bar

Running XP. I can't get my green volume slide bar to appear on the screen. I have verified all my keyboard drivers are current using HP on-line support. I verified my display settings are enabled in startup--maybe I missed one? I desire not to install a third party volume control if I can avoid it. Can someone help me re-establish the slide volume that came with the HP laptop?
v/r JR
v/r JR

In some models HP QuickLaunch button can also displayed the volume bar, I'm not sure if it was working for your model.Have you install HP Quick Launch Buttons?
Install Microsoft .NET Framework, here before HP QuickLaunch Buttons.
I used a third party one, very nice software and its a freeware.
here
3RVX, QuickTouch equivalent, (download 3RVX_2.5.msi) freeware from Matthew Malensek
Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

Sometimes the volume bar doesn't show up on the ipad

Hello,
I was wondering if anyone could help me with a problem I am having. One day out of the blue the sound on my wife's iPad stoped working for music or videos. The speakers still worked for ringers but not anything else, so I know that the speakers still work. Also I have noticed that the sound only works for the videos and music when you plug in headphones. Also for some reason if you go to raise or lower the volume the volume bar isn't present, I can't do anything with sound aside from hear my ringer. So I wanted to know if anyone knew what was wrong with it. I am thinking there might be a short because sometimes it will work again but only for about 3 seconds and then it doesn't work any more.
Also please don't give me the link of trouble shooting steps because I have already done them all, and I have also reset the iPad back to the original factory settings and nothing fixed the problem. I even went as far as going to geek squad since I had free tech support from them for the moment and they just told me that according to all the test/trouble shooting procedure that there is nothing wrong with the iPad hardware or software wise and since the speaker works with the ringer, it is obviously working. However for some reason it does not work with videos, music, or anything else for that matter without the headphones being plugged in.
If anyone has experience this problem please tell me what you had to do to get it fixed, and if repair was necessary how much did it cost?
P.S. I am sure that the mute is not on.

It is likely that you need a change a setting on your email server. See here -
http://support.tigertech.net/outlook-2007-lmos
http://email.about.com/od/outlookexpressbackuphelp/qt/et_server_copy.htm

Qosmio F750 - How to change dedicated graphics memory to 2GB...

In order to get my Qosmio F750 ready to run some games, I have updated all of the drivers on via the toshiba website and NVIDIA website while also downloading the relevant software. This includes updating the BIOS to version 2.00.
According to the [laptop specifications given on the Toshiba website|http://www.mytoshiba.com.au/products/computers/qosmio/f750/pqf75a-02y00q/specifications],
I should have the following allocation of memory to the graphics:
"4095MB Total: 2048MB dedicated memory + 2047MB shared memory"
When I go to check the Performance Information and Tools window, I get shown the following information:
Graphics
Display adapter type Intel(R) HD Graphics 3000
Total available graphics memory: 1696 MB
Dedicated graphics memory: 64 MB
Dedicated system memory: 0 MB
Shared system memory: 1632 MB
Display adapter driver version: 9.18.13.1422
Primary monitor resolution: 1366x768
DirectX version: DirectX 10
Of course, when I look carefully at the laptop specifications, I realize that the current graphics memory allocation corresponds to the Power Saving Mode i.e. graphics allocation when running on battery power
Normally this would be fine, however, I do not see any change in the info displayed even when I am running on AC power.
I have checked all of my power settings but even when everything is set to 'performance mode', the information displayed stays the same.
I try to look in the system bios to manually change the graphics allocation but no such option exists. Rather all options are set to performance mode...
So my ultimate question is, *How can I change the graphics memory allocation to performance mode as indicated in the system specifications?*
Is this something that occurs automatically without changing the displayed info?
Is there a driver that I have forgotten to update? Has a driver update caused this?
Has a BIOS update caused this?
On a side note, when checking the DirectX Diagnostic Tool, I the directx version is displayed as version 11. So I thought the issue was with the displayed information. But even on the Diagnostic Tool gives me the same info.
I would be very grateful if someone could help me out with this.
Thanks,
Omair

Okay I think I get it now.
The Performance Info and Tools Window only shows the information on the Intel HD Graphics 3000.
When the specs sheet says power saving mode it means graphics using only the Intel HD Graphics.
However because of Optimus, the notebook can use either the Intel GRaphics card or the nVidia GPU.
The performance mode in the specs sheet refers to when the notebook is using the nVidia GPU.
The integrated gpu and the dedicated gpu do not run at the same time but Optimus switched between the 2 of them whenever the situation requires it. Whatever it switches to decides which 'mode' the notebook is using. The memory allocations for these 'modes' will match those of the specs sheet.
But any information about the graphics memory will not change as it only displays the info on the integrated gpu.
Well, I can finally understand what the previous posts were referring to and why the posts themselves were pretty short (there wasn't any problem needing to be fixed!).
Thank you for all of your help Randy, Akuma and PauPau

I have my iPhone 4s plugged into a dock and the dock connected to an amplifier, the problem is that the amplifier doesn't have a volume changer and when i plug in the iPhone into the dock the iPhones volume bar disappears. how can i change the volume?app?

Hi
I have my iPhone 4s plugged into a dock and the dock connected to an amplifier with 2 speakers and a bass, the problem is that the amplifier doesn't have a volume changer and when i plug in the iPhone into the dock the iPhone´s volume bar disappears and im not allowed to change the volume and its very loud. how can i change the volume? is there an app? any ideas??(my dock doesnt have infrared remote controller )
TY!!!!

Kline25 wrote:
So even if I just ask to pay them to replace the lock button they won't because my screens are third-party?
Apple does not repair devices beyond replacing the screen on some models or a battery replacement. They replace the ENTIRE device.
For the Out of Warranty replacement cost, you could have gotten a fully functional replacement device. Instead you chose to spend less to get only the screen replaced and continue to live with additional issues.
Apple will not touch the device now. They will know that it was opened elsewhere and that the replacement screen is not original.

IPod Touch 3.1.3 1G no volume bar.

does anyone has this problem? i plugged in earpiece, reset everything,restore to factory setting,tried everything but still there is no volume bar appearing! There is a very very soft volume but its really depressing you can't adjust the volume!

Try the standard fixes to rule out a software problem:
- Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod
if still problem that indicates a hardware problem and an appointment at the genius Bar of an Apple store is in order.

Ipod Touch Version 3.1.3 volume bar disappeared and will not return

The volume bar on my 1st generation iOS 3.1.3 ipod touch started disappearing then would return with tweeking of the headphones and sometimes when resetting all settings. Now it is gone completely and won't come back.
I have tried resetting to factory settings.
Cleaning the jack with a clean dry toothbrush.
Any ideas???
I thought I would try getting help here before going to the apple store.

From your description it appears that the headphone jack is bad. You can make an appointment at the Genius Bar of an Apple store to hear what they have to say.
If Apple can't clean out the jack, they will exchange it for this price.
Apple - Support - iPod - Repair pricing
Likely not worth it for a 1G iPod. Thee a thrid-party place that is less expensive.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

My iPhone 4s no longer has sound for any of the applications but it does have sound for phone functions. Where is the setting for app sound? I have gone to the multitask screen and the volume bar is empty.

I recently found my phone outside in light rain (it had been there about 20 minutes). It had some glitches at first, however after letting it rest overnight it seemed to mostly recover. The one problem I am having is that I no longer have sound for any of my applications. I do have sound for phone fuctions, and I am able to use the speaker for phone functions.
When I am in my applications, including music/videos, the only way I can hear is if I use my earbuds. I am able to make a video and it will record sound just fine.
When I go to the multitask screen, the volume bar is empty and I cannot adjust it using the side buttons (even though in settings I have that feature activated). I completely reset all of my settings tonight and that did not make a difference.
Is there a setting I am missing, or am I just SOL? I am trying to avoid having to get a whole new phone but it is very frustrating to not have sound with my applications.

Hi Baileyfour,
Welcome to the Support Communities!
The articles below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
There are two places where vibrations can be set.
One is the Settings > Sounds
The other area is Settings > Notifications
If you have an app set to Alert, it may have a vibration set for it.
iOS: Understanding Notifications
http://support.apple.com/kb/ht3576
Information about Notifications settings can also be found in the iPhone User Guide (pages 131, 132)
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
I hope this information helps ....
Have a great day!
- Judy

Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???

Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???

Have you tried the standard fixes:
- Reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backup via iTunes
- Restore the iPod to factory defaults/new iPod.
If still problem you likely have a hardware problem and an appointment at the Genus Bar of an Apple store is in order.

Qosmio F750 - Cannot get some functions to work after Win 8 uprgade

I own a Qosmio F750-125, PQF75E.
Since I upgraded to Win 8, utilizing Toshiba Upgrade Assistant I might add, I had some issues.
Most importantly not being able to get my Toshiba Blu-ray player to install.
Eventually I managed, still don't exactly how but anyway, to install the latest version 1.0.0.5.70A.
The problem now is that the 3D function still don't seem to work.
When I open a 3D movie I only get the picture to display side by side, despite clicking on the 3D button.
I tried to update the Nvidia driver (v290) to the latest version v314, available on Nvidia site, for for my GeForce GT540M graphics card but every time I get a message that the driver cannot find compatible driver hardware. Eventually from within the upgrade files downloaded by Toshiba Upgrade Assistant I managed to install the v306. I am still however unable to install v 314, after the "system check" I still get the message that the driver can find compatible driver hardware.
However, the 3D still does not work. I notice that the face detection (SuperD Xtune) does not automatically start with the Blu-ray player when I launch or open a 3D file to be played by the Toshiba Blu-ray player, as it used to.
How can I get my Blu-ray Player to play my 3D properly again.
If I open Xtune I am able to calibrate the 3D and then it closes.
I do not see a app under all apps which seem to have anything to do with the face detection function.
Is there a setting that need to be changed, an additional driver to be installed or what?
I am really disappointed with the support I have received from Toshiba themselves on this issue.
I also wanted to update the BIOS of my laptop.
My bios version is 2 dating December 2011 but I notice that a newer BIOS is available from Toshiba Website dating February 2012, if I am not mistaken.
I downloaded that but when I run it I receive a message that my computer is not compatible.
**bleep** this is frustrating.
I want to get my 3D function back and be sure to run the latest and most appropriate drivers, at all times.

Dear Tonny
Thank you for patiently answering to my posts.
You are right, despite extensive notes in the Toshiba Step-by-Step upgrade guide and specific mention that the Blu-ray player can only be installed by using the Upgrade Assistant, it is not installed by the Toshiba Upgrade Assistant.
I am not sure though whether it actually did form part of the downloaded files but never the less I installed it by some miracle manually.
It did not want to install at first. I received a message that the player could not be found. I noticed that the player is a sMedio Inc player and I then searched sMedio Inc and download their WinDVD Pro player. After that the Blu-ray driver from Toshiba installed.
I also have it that v1.0.0.5.70A is the latest driver but through my local Toshiba Agent (MUSTEK) I received a driver from Germany and it was 1.0.0.5.48. I have not installed that as yet.
I am convinced that the problem lies with the interaction between the Blu-ray Player, Nvidia driver and SuperD software.
I searched my installed files and saw that I have Super D spd2900g and Super D X-tune installed. I uninstalled both and tried to re-install it form the file included in the Toshiba Upgrade Assistant (Super D IC Driver).
However only the Super D spd2900g part installed and the Super D X-tune part is now missing.
NOW I am completely BUGGERED because I do not know where to find the X-tune program to reinstall it.
SuperD's website is very basic, in fact somewhat primitive.
Thanks you also for the links, I have seen them somewhere and have had regard thereto but they are outdated.
They relate to much older versions and windows 7 not 8.
I must be honest, the poor response and support from Toshiba will most definitely lead to me not buying their product again. None of the so called technicians have help me achieve anything. I struggled and figured out everything myself so far.
I still also have no answer in respect of the BIOS upgrade issue. Is there no one I can contact directly.

How do I get my volume bar back on iPhone 4?

My volume bar is missing from my iPhone 4 and this seems to be the reason the audio won't work when I try to play music. However, when I play a ringtone the audio is fine. I put my iPhone in the Bose speaker dock and the volume bar comes back, but only temporarily. I've already tried restoring it and it didn't fix the problem. Help?

Just came home to find I have the same problem!! iPhone 4S, never jail broken,dropped or spilled anything on it! I have been using my original iPhone charger (when they came out with the new iPhone I just shaved my charging/docking station to fit) so it is a little on the dirty side!
This is the first post I read so I did the headphone thing, the docking undocking thing, restarted it and messed with all the volume setting and neither of them worked.
So finally taking "mike iPhone guys" post, I looked @ the 32 pin port at the bottem of the iPhone and I reminded me of a old Nintendo cartridge do untreated it as so.
*** THIS IS HOW I FIXED THIS ISSUE, I DO NOT RECOMMEND IT BEFORE CONSULTING APPLE, YOU MIGHT DAMAGE YOUR DEVICE*********
These are the exact steps I took ....
1. I blew into the port and it did absolutely nothing!
2. I took a vacuum ($200 Hoover windtunnel t series P.A.W.S pet approved vacuum, so it has some power behind it, not the most expensive but not the cheapest either) and used the smallest accessory, the long connection hose/tube with the smaller rectangle attachment and sucked the air out of the port.
This worked for 5 secs my volume bar appeard and then disappeared again.
3. I took a very thin butter knife, wrapped it with a paper towel that I sprayed windex with and stuck it in gently one both sides, tested and still didn't work.
4. Repeated the previous step but added a little pressure and shoved the blade in the upper part only closest to the screen, not the bottem side the knife didn't want to go in as easy so I didn't try, alot of dirt was on the rag, then I used a dry part of the towel and did the same again until there was no dirt on it!
Tested and still didn't work!
5. Blow in it once more, and vacuumed it once more but this time putting my finger in the area that the vacuum didn't reach on both ends an lightly tapping it, WORKS FINE NOW! Just needed some
Cleaning. I can only assume the dirt does make it
Think that it's still docked.

My volume bar isn't working,how do I fix it ?

How do I get a volume bar to work again?

Thanks for following up
Actually, I think my back up/sync is working. However I still see the sync/back up icon on some of my online albums in the right side of the organizer screen.
I can't figure out why some online albums have the icon and some don't. I've right clicked on each and choose "share" yet the albums situation stays the same with the same albums as before displaying the sync/back up icon.
I purchased an additional online storage, but after adding more photos and video, the amount of storage used hasn't increased.
Am I going crazy???
Thanks
Dave

After updating my iPhone 4S to iOS 7.0.6 my iPhone won't play sound. When I pull up on the screen where it shows volume bar, brightness bar, etc. The volume bar does not show up. Even muting and unmuting it didn't work. I reset my settings and nothing

No sound plays. Muting and unmuting doesn't work. Volume bar doesn't show up. Tried resetting my settings but nothin happened. Please help

Hello, lrc2.
Thank you for visiting Apple Support Communities.
Here is an article I would recommend taking a look at. Try all of the steps in this article and if you are still experiencing the issue, see step 9.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Cheers,
Jason H.

Image zone/Volume bar

HP Desktop M7240UK
Windows 7
Hi
I recently upgraded to Windows 7 from XP and I have lost the HP Image zone,how can I reinstall it?.
Also on my keyboard I have volume controls which when pressed would bring up a green volume bar on the monitor, this has also vanished and it was very handy.
Please can you help me retrieve these valuable items.
Regards

York, I don't believe that you will be able to reinstall HP Image Zone software. There is no way to install individual programs from the Recovery Discs. As for the volume bar, this is a special app. I have the same problem with my Logitech keyboard after installing Win7 Pro. So far I haven't found the solution for this either. I believe the Logitech software is not compatible with Win7.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Sound bar in programs not adjusting volume.

The issue:
Sound/volume bars in ANY program will not adjust "permanently" - but only momentarily before it jumps back to a louder setting (seems to be the max set for the system volume).
What I have attempted:
I recently purchased this unit (17-f020us) and updated, via HP's support website, all necessary drivers and programs - including the sp69164 for the audio driver (Realtek High Definition). I checked to see if there were any other updates to programs or drivers this morning (1-29-15) and none were listed. This unit does include Beats software.
I have also researched online for possible solutions - most being to just update the driver. Nothing is working to date (1-29-15).
I appreciate your assistance in correcting this very tiresome and annoying issue w/ the volume.
Thank you!

Hi @clrknt30
Welcome to the HP Support Forums!
I understand that your sound volume keeps automatically adjusting on you, normally upward. I am happy to help with this, and I did some digging looking for a possible cause.
A fix to try is, to go into the Control panel
then Hardware and Sound
then click on Sound and select the Communications tab
Select the option "Do nothing" then Apply
Let me know if this works for you.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Re: Qosmio F750 EasyControl Volume bar - illuminated or not?

Similar Messages

Maybe you are looking for