Re: Qosmio G - Hidden files and folders not showing

Hi folks, I have some hidden files and folders, which I was able to access before, and I used to click on the 'organise tab', view, Advanced Settings, show hidden files and folders, in order to hide or show the files.
Unfortunately there seems to be a problem, I just can't access my hidden files and folders any more, even when I go through this method.
someone help me out please, ASAP....
THANKS

Hi aaz911,
First of all it would be nice from you if you post more informations about your notebook model and operating system. This should be done always to get a detailed answer.
Anyway, I never heard about such a problem but make sure that every files will be displayed:
Start Windows Explorer > Tools > Folder Options > View and enable the following options:
-Hidden files and folders: Show hidden files and folders
-Hide protected operating system files (this should be disabled > without mark).
Furthermore can you find these missing files using Windows search?
If not I assume the files are deleted from somebody or due a virus. :(

Similar Messages

How do I get Firefox to show hidden files and folders. It should be available under help but help only gets as far as Open Containing folder and doesn't go on to show hidden files and folders

I am trying to find the status of Adobe Flash Player on my computer. I am advised that it exists in Firefox's hidden files and folders but I cannot find such a folder

You have an older version of Flash installed - Shockwave Flash 10.0 r45
You can see that for yourself in Tools > Addons > Plugins
"Show hidden files and folders" is a function of the Operating System, not an application such as Firefox. Windows Control Panel > Folder Options > View - Advanced Settings

How do I stop Windows 7 from searching hidden files and folders

In XP it was simple with the intuitive Advanced Search Options.
Even if you enable "Don't show Hidden Files and Folders" in Windows 7, they still show up in the search menu. A similar post included a suggestion by a support dude to post a question here. I've searched for every possible solution and yet something so simple appears to be non existent. Has Microsoft just lost its mind with omitting this feature? Is this something that will never be solved? Indexed or not, hidden files and folders still appear in Search.
Thanks

what have you setup in Explorer->Organize->Folder & Search Options?
Don't show hidden and Hide: Empty, Protected, etc. all ticked
if you have at some stage indexed all those system folders, and subsquently removed those from the index scope, then you may need to rebuild the index so those results are not presented by searches?
i've assumed that you are getting things like \windows included, and this seems to be typical. perhaps because some common tools like notepad, wordpad etc reside in those folders.
have you checked out the Indexing Options?
from memory, "don't show hidden & system" really only obscures the stuff when you're browsing in explorer. the indexing engine doesn't respect that kind of setting. you'll need to get your indexing scope worked out to affect the search results presented.
I'm not concerned much with indexing, it's just amazing that there is no option to stop "Search" from searching hidden files and folders when "Don't show hidden" is checked - the way it was with XP, etc. As I understand it whether folder is indexed or not, will not stop "SEARCH" from searching them. It was quite simple in XP but in Windows 7 it seems it is impossible.

How to recover hidden files and folders from memor...

When you connect your memory card to a PC or connect your phone as a mass storage device to a PC which is infected by a virus, the virus may hide all your files and folders.
The virus also changes their attributes to "hidden" and "read only" and may move all memory card content to another hidden folder, though the size of the disk looks unchanged, files are still invisible.
Steps to recover hidden files and folders:
First, change the settings in "folder options" so that we can see all hidden files and folders,
Open any folder > select organise > folder and search options, select view tab and under hidden files and folders setting, select "show hidden files, folders and drives", and uncheck the option "Hide protected operating system files" and click ok, click yes if a prompt appears for confirmation, now you should be able to see all hidden files and folders.
Second, connect your memory card to PC using a card reader or you can connect your phone as a mass storage device and note down its drive letter. (L) is the drive in my case as shown
1. If you have autorun.info file, you can manually delete it or use tools like autorun eater(or any other you like).
If all the folders are moved inside a hidden folder, select all the items inside that folder, cut them and paste them to root directory of your memory card.
If you select properties of any folder on your memory card, the hidden attribute might be locked as shown:
To solve these issues, type cmd in the start menu, right click on it and click run as administrator.
2. In the command prompt window, type the following:
L: [Press Enter]
Here, I assume L as your drive letter.
3. Type the following code to reset the attributes of all the files and folders to their default:
Attrib *.* -r -h -s /s /d [Press Enter]
After few seconds, all the files and folders will be reset to their normal attributes settings.
Hope you enjoyed reading the post and was helpful.
-------------------If this post helped you, click on accept as solution.------------------
-----------------------------Appreciate by clicking on white star.----------------------------

Check the formatting of the external hard drive. To do that, right click on the drive icon and select Get Info. (Or click once on the drive and type command +i ) The pane includes information about the drive format.
The drive should be formatted as Mac OS Extended. If it is not, run Disk Utility (App;ications / Utilities) and format the drive.

Folder Options - View Hidden Files and Folders

Hello,
On this same laptop, there seems to be an issue with *Folder Options - View Hidden Files and Folders.*
Each time i "check" that option to View - then i go back to verify/confirm the changes done - but the checkbox is "unchecked" again. Despite clicking on Apply and Ok to save the changes! The changes are never saved..
I have used other laptops for this same option and it all worked fine.
Please advise whether i need to apply or amend other settings for this to work?
Regards.

Hi
> Therefore, i doubt the antivirus program is the causal factor here..
I wouldnt say so.
I mean normally Bitdefender shouldnt cause such a problem thats right but theoretically its possible. Such security software programs are really good and necessary on every computer with internet connection but due the high security it could maybe blocks some changes from Windows.
In my opinion its worth a try to test it without Bitdefender. Alternative you can use AntiVir (freeware) and the Windows firewall. In my opinion a really good freeware solution.

Show hidden files and folders

Is there a way to show all the hidden files and folders in Finder? Thanks in advance.

Hi, Jon.
The freeware application TinkerTool will permit you to enable or disable the display of hidden or invisible files.
Be careful when working with hidden and invisible files: they are hidden and invisible for a reason!
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

Problems opening files in DW CS4 - not all files and folders are showing

Hi!
I'm trying to change some already existing files on the homepage but when I click the Open button, it doesn't show all the files and folders, even if I ask it to show all files. When I open the ftp folder in Explorer, I can see everything. I'm using Vista and Dreamweaver is version 10.0 Build 4117.
Most of the unaccessible files and folders were created using Frontpage a long time ago but this also happens when I create new files, although the new ones I created used one of the old ones as a template. Any help would be appreciated! It's rather annoying not to be able to access all the files.
Thanks a lot!
Mathias.

Not sure if that was meant for me
You can tell who was the intended recipient by looking at the header of the message -
6. Sep 10, 2010 6:50 AM in response to: FordGuy48 <<----
Re: Problems with embedding .flv files in DW CS4....
A link to the page would help us diagnose your problem.
Safari tells me that this file -
FLVPlayer_Progressive.swf
is not where you have told the page to expect it. Did you upload it?

HIDDEN files and folders

What is the purpose of hiding files or folders in your applications or downloads folders??? This may seem to be a really dumb question but I would really appreciate some sort of understanding for hidings applications or downloads. Thanks
Solved!
Go to Solution.

Hi there,
This is useful to hide icons you don't want to see (e.g. icons that were pushed to your phone by your carrier but that you can't delete). It can also be useful to hide certain applications that you don't want others to have easy access to. For example, I have hidden the BlackBerry Protect icon to make it that much harder for someone to find and play with (or accidentally delete). If I actually need to go into the app, I can simply unhide it while I need it, then re-hide it after.
The big reason for doing this is that it simply makes it harder for someone to delete an app on your phone or to access an app on your phone that you don't want them to have access to. And of course, it certainly helps that you can hide icons that are pushed from your carrier.
I hope this is the info you're looking for, but if you meant something else, let us know!
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution!

Artwork Import Corrupts File and Does Not Show in iTunes

I recently loaded some files into iTunes that I received as MP3s. After importing them, I attempted to add artwork. The artwork showed up originally, but everytime I went back to play the song, the artwork would disappear. And, each time I attempted to add the artwork, it caused the song to loop at the beginning. In other words, a 20 second or so snippet would play multiple times before the song would play. This appeared to corrupt the file in that the same thing would occur no matter what file I used. I thenreimported the raw files again, did not add artwork, and they played fine. As soon as I attempted to add the artwork again, the looping problem occurred again. I have used iTunes for a long time, and have never had a problem adding photos to my iTunes or my iPod.

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Deselecting hidden files and folders in 'Backup'

Hi,
I still use backup against my .mac account, and back up my home directory with a few folders deselected. How can I not back up hidden folders such as .Trash? When I searched for 'trash' in Spotlight (under the backup selection window) in Tiger, the .Trash folder appeared for me to deselect; however, it no longer appears in Leopard?
Many thanks,
Matt

Hi there,
This is useful to hide icons you don't want to see (e.g. icons that were pushed to your phone by your carrier but that you can't delete). It can also be useful to hide certain applications that you don't want others to have easy access to. For example, I have hidden the BlackBerry Protect icon to make it that much harder for someone to find and play with (or accidentally delete). If I actually need to go into the app, I can simply unhide it while I need it, then re-hide it after.
The big reason for doing this is that it simply makes it harder for someone to delete an app on your phone or to access an app on your phone that you don't want them to have access to. And of course, it certainly helps that you can hide icons that are pushed from your carrier.
I hope this is the info you're looking for, but if you meant something else, let us know!
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution!

Cannot see file and folders copied from other windows 8

Hi everyone,
The problem is the next:
I have new PC for that i was asked to setup and install software, i perform on it clean windows 8 install, it have single HDD 1TB that was partitioned by regular windows setup option to system drive C: 100GB and all left space was partitioned as drive D:
After setup finish i only boot to system to check that everything is OK and without to make ANY change to windows shut it down.
I physically disconnect HDD from new PC and connect it via standard USB 3 docking device to my own PC that also run windows 8 i can see the new connected HDD with all partitions without any problem! Than i create on second partition on new drive folder and
copy there some files, after copy finished i disconnect the drive in safe way by performing "eject" option in windows.
i connect new drive back to new pc, boot to windows and access the second partition and it ... empty, no folder or files on drive, it also show like no space was used !!!
MOST IMPORTANT ! - Why it don't looks like security or permission or even hardware problem - NO any major security changes was performed on my own (old) PC, but most important fact when i connect other hdd to same dock station and create folder and copy some
files and then connect it to NEW PC - problem does not exist !!! i can see and access without any problem the folder and files on both PC's !
I also tried:
to reinstall windows on new pc
to create or delete partition after setup in both PC's
to check folder and drive permissions and adding "everyone" with "full control"
to turn on "show hidden files and folders" and "system files" too
to copy or create new different type files
Interesting - if i create a folder in NEW PC i can see this folder on OLD PC and copy files to it, but whet i connect drive back to NEW PC it sometimes show the folder have those files and even use the appropriate space and programs even try to open those files
without any security warnings but it cannot be open properly because files looks corrupted !
Thanks for any help !

Hi,
According to your description, I don't think this is system problem. More like HDD or its interface problem.
Have you tried to reconnect your new HDD to your own computer again after you copy some file to it but couldn't find anything on new computer. If there is problem in new PC, how about your own PC?
Please have a try, If there was any progress, feel free let us know.
Roger Lu
TechNet Community Support

Hidden and hiding files and folders

how do I hide or unhide hidden files or folders??
I have a directory that I want to hide so that other people can't see it or get access to it. (or at least limit the people who can see it and get access to it.) How do I set it up to protect that directory and any file that goes into it?
cuz...I have two separate accounts (lets say....x and y) and I want only x and y and root to be able to have access to (e.g.) /home/directory
What command do I use to make it a "hidden file/folder"? (well..the Solaris equilvalent to a Windows hidden file or folder)

The option of changing the permisions is a better solution for what you want to do.
For completeness sake, the way to hide/unhide directories,files etc. in UNIX is by starting the name with a ".".
This does however not restrict access to the resource in any way , it just hides it from directory listings etc. Most tools/file managers etc. have an option to "show hidden files/directories" which negates its use as a security mechanism.
You will find that a lot of applications store their configuration information in directories starting with "." as is the case with netscape which has a ".netscape" directory off your home directory. It does serve the purpose of keeping it out of the way as it is not generally visible while still easily accesable.
The same holds true for WinTel "hidden" directories/files, in explorer they just show up as a lighter shade ( grayed out) but are still accessable like any other directory.
Hein

New files and folders on a Linux client mounting a Windows 2012 Server for NFS share do not inherit Owner and Group when SetGID bit set

Problem statement
When I mount a Windows NFS service file share using UUUA and set the Owner and Group, and set the SetGID bit on the parent folder in a hierarchy. New Files and folders inside and underneath the parent folder do not inherit the Owner and Group permissions
of the parent.
I am given to understand from this Microsoft KnowledgeBase article (http://support.microsoft.com/kb/951716/en-gb) the problem is due to the Windows implmentation of NFS Services not supporting the Solaris SystemV or BSD grpid "Semantics"
However the article says the same functionality can acheived by using ACE Inheritance in conjunction with changing the Registry setting for "KeepInheritance" to enable Inheritance propagation of the Permissions by the Windows NFS Services.
1. The Precise location of the "KeepInheritance" DWORD key appears to have "moved" in Windows Server 2012 from a Services path to a Software path, is this documented somewhere? And after enabling it, (or creating it in the previous
location) the feature seems non-functional. Is there a method to file a Bug with Microsoft for this Feature?
2. All of the references on demonstrating how to set an ACE to achieve the same result "currently" either lead to broken links on Microsoft technical websites, or are not explicit they are vague or circumreferential. There are no plain Examples.
Can an Example be provided?
3. Is UUUA compatible with the method of setting ACE to acheive this result, or must the Linux client mount be "Mapped" using an Authentication source. And could that be with the new Flat File passwd and group files in c:\windows\system32\drivers\etc
and is there an Example available.
Scenario:
Windows Server 2012 Standard
File Server (Role)
+- Server for NFS (Role) << -- installed
General --
Folder path: F:\Shares\raid-6-array
Remote path: fs4:/raid-6-array
Protocol: NFS
Authentication --
No server authentication
+- No server authentication (AUTH_SYS)
++- Enable unmapped user access
+++- Allow unmapped user access by UID/GID
Share Permissions --
Name: linux_nfs_client.host.edu
Permissions: Read/Write
Root Access: Allowed
Encoding: ANSI
NTFS Permissions --
Type: Allow
Principal: BUILTIN\Administrators
Access: Full Control
Applies to: This folder only
Type: Allow
Principal: NT AUTHORITY\SYSTEM
Access: Full Control
Applies to: This folder only
-- John Willis, Facebook: John-Willis, Skype: john.willis7416

I'm making some "major" progress on this problem.
1. Apparently the "semantics" issue to honor SGID or grpid in NFS on the server side or the client side has been debated for some time. It also existed as of 2009 between Solaris nfs server and Linux nfs clients. The Linux community defaulted to declaring
it a "Server" side issue to avoid "Race" conditions between simultaneous access users and the local file system daemons. The client would have to "check" for the SGID and reformulate its CREATE request to specify the Secondary group it would have to "notice"
by which time it could have changed on the server. SUN declined to fix it.. even though there were reports it did not behave the same between nfs3 vs nfs4 daemons.. which might be because nfs4 servers have local ACL or ACE entries to process.. and a new local/nfs
"inheritance" scheme to worry about honoring.. that could place it in conflict with remote access.. and push the responsibility "outwards" to the nfs client.. introducing a race condition, necessitating "locking" semantics.
This article covers that discovery and no resolution - http://thr3ads.net/zfs-discuss/2009/10/569334-CR6894234-improved-sgid-directory-compatibility-with-non-Solaris-NFS-clients
2. A much Older Microsoft Knowledge Based article had explicit examples of using Windows ACEs and Inheritance to "mitigate" the issue.. basically the nfs client "cannot" update an ACE to make it "Inheritable" [-but-] a Windows side Admin or Windows User
[-can-] update or promote an existing ACE to "Inheritable"
Here are the pertinent statements -
"In Windows Services for UNIX 2.3, you can use the KeepInheritance registry value to set inheritable ACEs and to make sure that these ACEs apply to newly created files and folders on NFS shares."
"Note About the Permissions That Are Set by NFS Clients
The KeepInheritance option only applies ACEs that have inheritance enabled. Any permissions that are set by an NFS client will
only apply to that file or folder, so the resulting ACEs created by an NFS client will
not have inheritance set."
"So
If you want a folder's permissions to be inherited to new subfolders and files, you must set its permissions from the Windows NFS server because the permissions that are set by NFS clients only apply to the folder itself."
http://support.microsoft.com/default.aspx?scid=kb;en-us;321049
3. I have set up a Windows 2008r2 NFS server and mounted it with a Redhat Enteprise Linux 5 release 10 x86_64 server [Oct 31, 2013] and so far this does appear to be the case.
4. In order to mount and then switch user to a non-root user to create subdirectories and files, I had to mount the NFS share (after enabling Anonymous AUTH_SYS mapping) this is not a good thing, but it was because I have been using UUUA - Unmapped Unix
User Access Mapping, which makes no attempt to "map" a Unix UID/GID set by the NFS client to a Windows User account.
To verify the Inheritance of additional ACEs on new subdirectories and files created by a non-root Unix user, on the Windows NFS server I used the right click properties, security tab context menu, then Advanced to list all the ACEs and looked at the far
Column reflecting if it applied to [This folder only, or This folder and Subdirectories, or This folder and subdirectories and files]
5. All new Subdirectories and files createdby the non-root user had a [Non-Inheritance] ACE created for them.
6. I turned a [Non-Inheritance] ACE into an [Inheritance] ACE by selecting it then clicking [Edit] and using the Drop down to select [This folder, subdirs and files] then I went back to the NFS client and created more subdirs and files. Then back to the
Windows NFS server and checked the new subdirs and folders and they did Inherit the Windows NFS server ACE! - However the UID/GID of the subdirs and folders remained unchanged, they did not reflect the new "Effective" ownership or group membership.
7. I "believe" because I was using UUUA and working "behind" the UID/GID presentation layer for the NFS client, it did not update that presentation layer. It might do that "if" I were using a Mapping mechanism and mapped UID/GID to Windows User SIDs and
Group SIDs. Windows 2008r2 no longer has a "simple" Mapping server, it does not accept flat text files and requires a Schema extension to Active Directory just to MAP a windows account to a UID/GID.. a lot of overhead. Windows Server 2012 accepts flat text
files like /etc/passwd and /etc/group to perform this function and is next on my list of things to see if that will update the UID/GID based on the Windows ACE entries. Since the Local ACE take precedence "over" Inherited ACEs there could be a problem. The
Inheritance appears to be intended [only] to retain Administrative rights over user created subdirs and files by adding an additional ACE at the time of creation.
8. I did verify from the NFS client side in Linux that "Even though" the UID/GID seem to reflect the local non-root user should not have the ability to traverse or create new files, the "phantom" NFS Server ACEs are in place and do permit the function..
reconciling the "view" with "reality" appears problematic, unless the User Mapping will update "effective" rights and ownership in the "view"
-- John Willis, Facebook: John-Willis, Skype: john.willis7416

Browsing for file in icon mode does not show all files and folders.

When in Illustrator and I select open, the preview pane does not arrange the files to fit the window size. This does not happen in list mode but in icon mode. I can't see all the files and folders because they are outside of the window and I can't scroll to the right to see them.

Yosemite, right?
Don't use anything other than list view. It's all buggy.

How to view and manage hidden files in folders.

Hi all, my question is: How to view and manage hidden files in folders?. I see hidden files in other computer but no in my Mac.
Some of you can help me?
Thanks..

Most hidden files are hidden for a reason. Tampering with them can seriously affect the stability of the system.
The software Tinkertool can
http://www.bresink.com/osx/TinkerTool.html
Can manage the invisibility, which I would only do after backing up your system.

Re: Qosmio G - Hidden files and folders not showing

Similar Messages

Maybe you are looking for