Re: Qosmio X - Turn off the sound when usin the EasyControl buttons?

Hi,
Is it possible to switch off the bleeping sound when using the EasyControl buttons?
I don't want the computer to bleep every time I increase (or decrease) the volume.
Can I turn it off?
Message was edited by: regent8

ya...you can do that...from the bios setup before the OS loads.

Similar Messages

  • I have read the thread about turning off dialpad sounds when calling a number. I used to always be able to do this on my 4S but not so since the latest software on the 5. Keyboard clicks are turned off and still have dialpad sound. I've NEVER had to mute.

    I have read the thread about turning off dialpad sounds when calling a number. I used to always be able to do this on my 4S but not so since the latest software on the 5. Keyboard clicks are turned off and still have dialpad sound. I've NEVER had to mute to dial before.

    I really do not think it is the iPad or your network connection. Other users have reported this very same issue. Try this and see if it works for you - it may not work - but it's easy to try - harmless - and it has worked in the past for others.
    Try signing out of your account and restart your iPad.
    Go to Settings>Store>Apple ID and tap the ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. Go back to Settings>Store> Apple ID and sign in again.

  • How do you reduce/turn off keypad sound when making a phone call

    How do you reduce/turn off keypad sound when making a phone call?

    If I understand the question correctly, it is not about turning off keyboard clicks, it's about silencing the beeps made when manually keying in a  phone number. With keyboard clicks turned off, the beeps still sound when keying in a phone number. If I'm reading the iPhone User Guide correctly, it explains how to turn off keyboard clicks but not how to silence the   beeps when keying in a phone number. The only way I have found to silence the beeps is to put the phone into silent mode.

  • Iphone 4 plays email tone in ear speaker while on phone.  How do I turn off alert sounds when on phone?

    When I am on a phone call and I receive a new email it plays the email alert through the ear piece and it is very loud and I am unable to hear the person I am speaking with.  I NEED to be able to turn off this notification when I am on a call only.
    How is this done?
    thanks

    I could, but that would defeat the purpose of what I am trying to accomplish.  The point is to set it one time and forget it.  Also, with my email tone going off I have turned the phone to silent and the email tone blares out until it is done.  ***, shouldn't turning it to silent turn it to silent? 
    What I want to accomplish is when I am on my phone the only noise out of my phone I want to hear is the other caller!

  • Help: How Can I turn off a sound bound to the CTRL key?

    Hi, I made a small Unity3D game using the CTRL key as the fire button. There I added a sound to the CTRL key. Now all of a sudden that key always makes that sound "on mouse release". No help even after deleting the sound file, clearing the PR Ram, making restarts. OS X Yosemite on my iMac 5k will always make that sound initially only active during the game. Any help appreciated. Thanks Rolf

    Problem found - there was a hidden web page open with a similar game that accepted the CTRL key. :-)

  • How to turn off number sounds when dialing out?

    ?  I have the keyboard sound off already, but, when I dial out the numbers are not silent.

    The keyboard is just that, ...the keyboard, ....used only for text, email and web.  The phone dialing screen is totally different and is uneffected by any changes you make to the keyboard settings.  The only way to silence the phone when dialing out is to either turn the volume all the way down (not logical) or to engage the mute slide on the side of the phone.  **Warning, ...both options also turn the ringer off or down.  I would like to see apple address this in the next update.  Users don't need to hear these loud numbers.

  • Is there any way to turn off keypad sounds when making a phone call?

    I am a new user to iphone....is there any way to turn off sounds of keypad when making a manual phone call of someone not in address book?
    Thanks

    If I understand the question correctly, it is not about turning off keyboard clicks, it's about silencing the beeps made when manually keying in a  phone number. With keyboard clicks turned off, the beeps still sound when keying in a phone number. If I'm reading the iPhone User Guide correctly, it explains how to turn off keyboard clicks but not how to silence the   beeps when keying in a phone number. The only way I have found to silence the beeps is to put the phone into silent mode.

  • How do you turn off beeping sound when you put a call on hold

    I spend a lot of time on conference calls and get calls coming in on the other line which I want to switch over to. The iPhone's hold feature is great for just popping over quickly to the other call and then coming back to the first call, the problem is that there is a beeping sound to the audience on the fist call while they are on hold. Is there anyway to turn this beeping feature off, I don't want to disrupt the conference call while I flip over to the second call? Does anyone know if you are on mute, does it still beep for the party on the first call?

    There is no beep on the line when I place a call on hold, whether the iPhone is on mute or not (just tried this by calling my desk phone then placing the call on hold). It may be generated by the carrier, instead of the phone.
    A workaround may depend on your t/c system - for example, dialing *5 on ours places you on mute in the t/c system, not locally.

  • Turn off iChat sounds when busy?

    I can't quite believe this isn't a feature as it is in every other IM program, but...
    Say I'm on a Gmail phone call.  I set iChat to 'Busy'.  But still people typing messages make the popup sound.  I can find no way to mute iChat sounds when I'm Busy.  As a result, the caller hears all these weird sound effects as the MacBook Pro speaker is right by the mic!
    My only option is to quit iChat and appear offline to the person who was mid-conversation with me.  Not very friendly, not very 'Apple'.
    Surely there is an easier way to 'mute sounds when busy'?

    Hi,
    As Video and Audio Chats are Peer-to-Peer you can in fact log the Buddy List Off Line so it cannot make a noise.
    Unfortunately this does not allow you to keep Text or sending Files to the Buddy you are chatting with.
    You can also set System Preferences > Sound > Sound Effects to a lower volume as this is the Volume the Alerts sounds are played at.  (It will also reduce the sound of " New Mail" if you have one set).
    I tend to balance the Sound Effects Volume against the Master/output Volume so that they don't interrupt/distract from any conversation
    They can be Turned Off In iChat Preferences > Alerts (Albeit one by one)
    There is no Mute Alert Sounds button or setting in any of the menus.
    11:01 PM      Tuesday; August 9, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • How do I turn off message sound when I'm on a phone call

    I am going to go deaf if I don't put my phone on silent before taking a phone call, for fear of receiving a text message!!! How do I stop this?

    This is only a work around and not a solution to the problem. Apple needs to add an option to be notified during the call or play another, lower and softer, tone while a call is in progress. With a mailbox that blows up all day long and a phone I live on, mind you with a headset in my ear, this is a horrible problem for me. A simple change in the sound profile for this would make me happy. When will we see this? Maybe when IOS 9 since apple is always behind the curve when it comes to enhancements.

  • Battery turns off suddenly and when restarted the date comes up as 1969

    My PowerbookG4 will shut down suddenly saying there is no more battery left when it really has around 30% left.
    When restarted it comes up with an error message saying that some programs may run erratically and the date and time are set at Wed. December 31st, 1969 at 4:00pm. Most times when it connects to the internet it goes to the normal day and time, however some times it has to be corrected manually.
    Why is the battery shutting off and the time going crazy?
    Powerbook G4   Mac OS X (10.4)  

    The battery might be in not good condition.
    about the date comes up as 1969 may be happened if the backup battery (another battery inside PBG4 17"). the backup battery is for save PMU setting & date time

  • HT204368 Why does connection to a bluetooth device turn off all sounds but the ring tone?

    I have a Bernafon bluetooth device that connects via bluetooth to my iPhone 4 running iOS6 and routes the telephone through my hearing aids however, it appears that connecting via bluetooth turns off all sounds other than the incoming call ring tone.  This has caused me to miss several time sensitive text messages and emails.  Does anyone have a solution? 

    Without knowing what DAQ Hardware you have and what version of NI-DAQ you are using, it's hard to say exactly how to resolve this. However, I would suggest using the Intermediate and Advanced Digital VIs rather than the Easy VI because you have more control. There are examples that ship with LabVIEW and examples online that should assist you. There is also a KnowledgeBase 24BECT4U that may be helpful.
    Regards,
    Molly K.
    National Instruments
    Molly K.
    Web Support & Operations Manager
    National Instruments

  • Is it possible to switch off the sound when typing

    Hello folks. I am new member. I purchased the 64g unit. It's a great piece of kit.
    Question. Is it possible to turn off the annoying 'beep' sounds when using the keyboard? I know I could just turn down the sound on the top but that defeats the obtject. 
    Thank  you
    Ross
    Regards to all (except BB)
    Solved!
    Go to Solution.

    rossjackson01 wrote:
    Hello folks. I am new member. I purchased the 64g unit. It's a great piece of kit.
    Question. Is it possible to turn off the annoying 'beep' sounds when using the keyboard? I know I could just turn down the sound on the top but that defeats the obtject. 
    Thank  you
    Ross
    In the options goto KEYBOARD and just lower the feedback control to what ever level make you confortable
    Using the Playbook and the Z10 and the Z30 and loving them
    Martin

  • HT201401 My iphone 4s turned off properly but when I went to put it back the apple icon came on and then an image I have never seen before of a ubs pointiing towards the word itunes in a circle.  And the phone no longer goes beyond this message.  meltdown

    My phone started acting up and I noticed my text messages were not being sent.  So I turned my iphone off.  My iphone 4s turned off properly but when I went to put it back the apple icon came on and then an image I have never seen before of a UBS pointiing towards the word itunes in a circle.  And the phone no longer goes beyond this message.  I try to turn it off and on again and same message over and over.  If I hit the any button on the phone nothing happens. Does anyone know what this means or seen this itunes messaging ?  meltdown? Please help.

    Hello Raja,
    Thank you so much for your response.  I had these photos backed up on iCloud but, had I not, its good to have an alternate solution as the one you suggested.  Actually, I went to the Apple store today and yes, you are absolutely correct Restoring in iTunes will result in permanent loss of photos unless backed up somewhere such as iCloud or other solution.  Well, what they did was restore the phone in itunes ( I did not have iTunes downloaded to my computer which is why it did not work when I went to do it myself, I needed to go to the iTunes site and go to the download iTunes button because my windows based HP laptop does not come with itunes already downloaded).  This retoration process took a while and I was forced to upgrade to the latest 7.1 iOS software which I was not too happy about -sometimes you like the way things work now :-)  Anyhow, they said this restoration request happens as a result of a software update (which I was NOT in progress of an update or doing an update) or sometimes when you remove the power cable too quickly from the iphone (which I do not recall doing this either but...). Since I had backed up on iCloud all of the photos were downloaded back on my iphone 4s.  Best of all was that my phone was back up and runnning and there was NO CHARGE at the apple store for this service of restoring my phone.  Well, I just wanted to share the results and I appreciate all the responses and support I received.  Thank you kindly.

  • My iphone 4 only turns on when its plugged into a wall and when it finally turns on it lasts for about a minute then it turns off and while its on the signal says searching, what should i do?

    my iphone 4 only turns on when its plugged into a wall and when it finally turns on it lasts for about a minute then it turns off and while its on the signal says searching, what should i do?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.      
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. You likely have a bad battery.
    Apple Retail Store - Genius Bar                       
    Apple will exchange your iPod for a refurbished one with a new battery for $79. They do not fix yours.
    Apple - iPod Repair price                       
    A third-party place like the following will replace yur battery for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the battery yourself if you are up to it. A replacement costs about $10
    iPod Touch Repair – iFixit

Maybe you are looking for

  • Video doesn't work on some Android devices

    Hello, I wrote a small app for Android and I'm trying to show a movie from the net. Everything works on the AIR simulator, the problem starts when I try to run it on my device. I have a Galaxy S4 with Android 4.2.2 and I'm using AIR 3.8 (captive with

  • Using a import statement conditionally

    How would I import a library statement based on a condition, in this example use the versioning of java JRE that the program needs is to run under the JRE? i.e: import javax.swing.*; //This is the final package name. //import com.sun.java.swing.*; //

  • Application Control Policies - Is that it?

    Restrictions based on executable name only seems very restrictive, maybe I came in with the wrong mindset. I was looking at this been an SRP like replacement but the inability to do path based rules or default deny all but allowed programs. Been exec

  • Installing photoshop elements 6

    Hi, totally new to all this, and in need of help!! Trying to install PSE6 and it is coming with "java Script Alert" Critical errors were found in set up. Incompatible payloads already installed. See set up log for details. (can't find set up log) I h

  • Oracle Servlet Engine - Oracle 9i

    How do I change the default port - 8080 for the Oracle Servlet Engine that seems to have been installed with Oracle 9i. Also, how do I disable it from starting at all or is that something that's necessary in order for 9i to run. cheers Aj