Re: Query Mode Sys Admin?
Can you tell me why the responsibility we created for System Administrator (RO) would be having issues allowing access to functions that have the QUERY_ONLY=YES parameter completed? This Responsibility was created in 2010 and worked fine; however, in our R12 world, we are now noticing that there is bleed thru access to functions that are clearly query only. Menus have been recreated completely for this responsibility.
Hi,
As satya said, it is possible to create readonly system administrator responsbility. I have tested it, it is working fine.
(a) Find out the functions which are attached to system administrator responsbility
(b) Create new functions based on the functions listed above and add the parameter QUERY_ONLY=YES to these functions
(c) Create new custom sub menu's and add these readonly functions to respective custom sub menu's
(d) create custom top menu and add the custom sub menu's created above to this menu
(e) Add this custom top menu to read only system administrator responsbility
Similar Messages
-
Screen Pop a View in New Query Mode
I am doing a Siebel screen pop customization and am having trouble figuring out how to open my desired view in query mode when the call comes in. I have specified my BusComp and BusObj as well as my SingleView in the custom EventResponse but am not sure where and how to specify the mode which I want the view to open in.
Anyone know how to do this?
Thanks in advance!Thank you Fuzii,
I am a Siebel newbie and am trying to figure out how to do a few things with custom screen pops.
My EventResponse looks like this:
[EventResponse:AnsweredInboundCall]
QueryBusComp = "<busComp>"
QueryBusObj = "<busObj>"
QuerySpec = "[<fieldName>] = '{<variableName>}'"
SingleView = "<viewName>"
So the specified view will show when there is a match on the variableName. In case that variable is empty or a match is not found, then I would like to have the view open in query mode. I am doing this directly in the Siebel Admin Configuration but it doesn't seem that there is a way to tell the applet which mode to open in here.
If I set the Auto Query Mode to 'New Query' in Siebel Tools, will my specification for SingleView in EventResponse override it and show the view with that record found?
Thank you for the help :) -
Cannot View SQL button in XI 3.1 edit query mode
Hi All,
I am using Webi XI 3.1.
I dragged the objects into results pane and want to view the SQL for the query. But I don't find the SQL button at all.
Please help me where to get that!Hi George Pertea,
Thanks for the reply.
I am in the edit query mode and also the query tool bar is enabled.
But my "view sql" button is disabled,I cannot click on it.
I am logged in as "Admin" , so what is the problem.
I was able to do that in XI R2 before.
Please help me!
Thanks -
[Solved] Problem with LOV and 'enter query' mode
Hi all,
I'm kind of new to Forms and I'm having some problems that I'm not being able to resolve. I already search it on the net, but nothing relevant came up. If anyone could help me I appreciated it.
In my form I have some fields, and in one of them I have a LOV, and almost everything works fine. I inserted data, changed it, deleted it and all it's ok.
But when I change to 'enter query' mode, when I try to search for data on the LOV field it ignores what I write.
That is, for it, it's the same if I make F11 -> write 'aaaa' -> ctrl + F11 or if I make F11 -> '%' -> ctrl + F11.
It behaves the same way, shows me all the records.
Probably I'm missing something basic, but I'm not getting it...
Thanks,
Anawhen you create a lov by wizard the lov and record group have always the same name..
the problem is that the item is NOT based in the tabe.
what kind of query do you execute if you choose something from a love which is not based on the db?
i mean, this item has no influence on the query of the table, so whatever you choose it's like a "select * from table"
i hope i was clear -
File Upload applet not opening in Query Mode
File Upload Applet is opening in Query Mode in Siebel 7.5, where as in Siebel 7.8 its not opening in Query Mode.
Should anything be changed in CFG? or siebel restricted this?Hi,
There is a property called "Auto Query Mode" in the applet. Check whether this has been set to "New Query" in 7.5. If so the applet will be opening in Query Mode automatically. If this property is blank, in 7.8, the applet will not be opening in Query mode. Check and let me know.
Regards,
Joseph -
How to put the form in Query mode
Hello
Please let me know how to put the form or block in Query mode , so that when i run the form it should be in Query mode . I have seen properties of SET_FORM_PROPERTY and SET_BLOCK_PROPERTY but cannot find one
ThanksQUERY mode? Did you mean, that you can only QUERY without changing data.
This is the QUERY-ONLY-mode, which can be started e.g. call_form
this is the help for that topic:
PROCEDURE CALL_FORM
(formmodule_name VARCHAR2,
display NUMBER,
switch_menu NUMBER,
query_mode NUMBER,
data_mode NUMBER,
paramlist_name VARCHAR2);
query_mode
NO_QUERY_ONLY (The default.) Form Builder will run the indicated form in normal mode, allowing the end user to perform inserts, updates, and deletes from within the called form.
QUERY_ONLY Form Builder will run the indicated form in query-only mode, allowing the end user to query, but not to insert, update, or delete records. -
When attempting install of iTunes 10.5 for Windows 7 on Parallels 7, I get a message saying, "A program required to install cannot be run. Contact the package vendor or sys admin" (that's me). I completely uninstalled the previous iTunes prior to this. Any thoughts?
Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
What is the differences between viewCriteria query modes?
Hello all,
recently we faced a performance issue in a production application. after tracing we found that the issue was caused by setting the query mode of the view criteria to in memory.
bussiness case description:
when creating a new record for table A, I want to populate one field depending on records in another table B, so I used model driven LOV.
The problem was that new records were created for both tables in the same ADF train i.e. the data for both tables were not posted or committed yet.
so by using a query based ViewObject + viewCriteria with query mode set to memory for viewCriteria I managed to populate the LOV with the correct data,
in another page I will show database records for table A with LOV to show meaningful messages to users , but I can as well create new records for table A ,but the loading of this page is very slow.
tracing:
using alter session set sql_trace=true; I found that table B is fully scanned and all rows are fetched-180000+ record-.
Problem description:
from the trace file generated found that the query issued did not have a where clause.
also found that the viewObject fetched the entire table into memory- 180000+ record,- then searched them in memory.
Solution:
changing the query mode of the viewCriteria seems to solve the issue
so in order to avoid such issues in the future ,I wanted to make sure I understand the differences between the query modes of view criteria and their impact on the performance and if there are any differences if the viewObject is based on an entity or a sql dml.
this is what I know so far -please correct me if I am mistaken-:
1)database: search the database appending the conditions of the viewCriteria to whatever the query is
2)memory: search the rows that are already in the memory.
3)both: search both database and memory.
also, in case I updated one of the records in the memory but did not yet post or commit will the fetched rows have the updated values? and if these changes fails the condition from the viewCriteria , will the rows be shown?.The camera roll contains all the photos and videos taken on your device, as well as any saved on your device from the internet, emails, text messages, etc. The photo library contains photos synced to your device from your computer.
Only camera roll photos are synced using iCloud with photo stream. And photo stream only syncs photos, not videos. -
Hi All,
Can anyone tell me where can we get Export in Query mode(Used to export grids to Excel sheet) settings?
One more problem with this is that the Excel that is exported on clicking on "Export on Query mode" button overwrites the current Excel working file that we are working upon. How can this be solved?It is the behavior, Query ready mode will only pulls the members which are in Essbase (no FR calculated fields)
Regards
Celvin
http://www.orahyplabs.com -
FRM-41361 Cannot navigate out of current form in Enter-Query Mode
Hi All,
I am getting the FRM-41361 error in the bottom message area when opening a form from the function navigator. The issue does not exist when opening the form from the application homepage. The form is loaded in enter-query mode, and the enter_query command is in the WHEN-NEW-FORM-INSTANCE trigger. I have checked all triggers that fire after this point for any type of navigation but do not see any. The interesting thing is, if I put a fnd_message.set_string and fnd_message.show just before the enter_query call to debug, the issue goes away entirely.
Is it possible there are security triggers firing after the form is loaded into enter-query mode that could be causing this and that the fnd_message calls are indeed buying time for those triggers to complete before the enter_query call?
Any help/advice is appreciated. Thanks!
DanYes, when I looked through the triggers I made sure to look for go_block and go_item calls as well as any calls to leave the form.
-
I want to be able to open a form in query mode - is there any way to set this?
I am using Designer and Headstart.
ThanksHi Cathy,
You can do this. See the help topic: About the startup query mode of generated forms.
Rgds
Susan
Oracle Designer Product Management -
Change background color in enter-query mode
Hi everyone,
I am trying to Change background color in enter-query mode in forms10g. I am using this
Set_Item_property('org.branch_code', BACKGROUND_COLOR, 'Green' );
ThanksThis is the code that allows to colorise items in enter_query mode, then de-colorize them after execute_query.
Assume that you have created a VA_QUERY visual atribute in your module.
-- Colorise in enter-query mode --
PROCEDURE Start_query IS
LC$Block Varchar2(30) := Name_in('system.trigger_block') ;
LC$item varchar2(60);
LC$itemdeb varchar2(60);
LN$len pls_integer ;
BEGIN
lc$itemdeb := get_block_property(LC$BLOCK, FIRST_ITEM) ;
lc$item := LC$BLOCK || '.' || lc$itemdeb ;
while lc$itemdeb is not null Loop
IF GET_ITEM_PROPERTY(LC$Item , ITEM_TYPE) NOT IN ('BUTTON','RADIO GROUP','DISPLAY ITEM') Then
IF GET_ITEM_PROPERTY(LC$Item , QUERYABLE ) = 'TRUE' Then
set_item_property(LC$item, CURRENT_RECORD_ATTRIBUTE, 'VA_QUERY');
End if ;
End if ;
lc$itemdeb := get_item_property( lc$item, NEXT_NAVIGATION_ITEM );
lc$item := LC$BLOCK || '.' || lc$itemdeb ;
end loop ;
END;
-- Unclororize after execute_query --
PROCEDURE End_query IS
LC$Block Varchar2(30) := Name_in('system.trigger_block') ;
LC$item varchar2(60);
LC$itemdeb varchar2(60);
LN$len pls_integer ;
LN$Multi pls_integer ;
BEGIN
lc$itemdeb := get_block_property(LC$BLOCK, FIRST_ITEM) ;
lc$item := LC$BLOCK || '.' || lc$itemdeb ;
LN$Multi := GET_BLOCK_PROPERTY(LC$Block , RECORDS_DISPLAYED ) ;
while lc$itemdeb is not null Loop
IF GET_ITEM_PROPERTY(LC$Item , ITEM_TYPE) NOT IN ('BUTTON','RADIO GROUP','DISPLAY ITEM') Then
IF GET_ITEM_PROPERTY(LC$Item , QUERYABLE ) = 'TRUE' Then
If LN$Multi > 1 Then
set_item_property(LC$item, CURRENT_RECORD_ATTRIBUTE, 'VA_CURRENT_RECORD');
Else
set_item_property(LC$item, CURRENT_RECORD_ATTRIBUTE, '');
End if ;
End if ;
End if ;
lc$itemdeb := get_item_property( lc$item, NEXT_NAVIGATION_ITEM );
lc$item := LC$BLOCK || '.' || lc$itemdeb ;
end loop ;
END;Francois -
How to display LOV on web in ENTER-QUERY mode with form or block query only.
Hello all
How can I display lov automatic on the web in from enter-query
mode in form or block query only mode.
thankxIf I understand correctly your explanation, your called form
fails to activate the LOV in enter-query mode when it is deployed
and test on the browser.
So lets proceeed like this, to make it work in all environments,
let us programetically activate the LOV.
HOW?
In the called form, write in the WHEN-NEW-ITEM-INSTANCE TRIGGER
at block level (if have more than one LOV)
IF :SYSTEM.MODE = 'ENTER-QUERY' THEN
IF get_item_property(:system.cursor_item,lov_name) IN ('YOUR
LOV1', 'LOV2' etc) THEN
IF SHOW_LOV(get_item_property(:system.cursor_item,lov_name))
THEN
NULL;
END IF;
END IF;
END IF;
The above code maybe tweak to suite your need and condition.
This way, we explicitly make the LOV appear in ENTER-QUERY mode
whenever the user clicks on an item with an attached LOV.
Hope this helps.
Mohammed R.Qurashi -
Query mode of Master Detail Form
I have a master-detail form.
I'm passing parameters to that form to autoquery data.
Everything works fine but "Next" button in a detail block.
I'm getting:
An unexpected error occurred: ORA-06502: PL/SQL: numeric or value error: NULL
index table key value (WWV-16016).
After autoquery LASTIN_SET variable of DEFAULT block is set "5" (number of rows in detail block).
When I click on "Next" button LASTIN_SET variable is set to "0" instead of "5" and that causes a problem.
So, somehow LASTIN_SET is not preserved between clicks.
In fish_size_form master-detail form
... before displaying the page
shrimp.p_set_parameter_fish_size(p_session,
p_block_name,
p_object_name,
p_instance,
p_event_type,
p_user_args
This is a code of shrimp.p_set_parameter_fish_size
p_session in out nocopy portal92.wwa_api_module_session,
p_block_name varchar2,
p_object_name varchar2,
p_instance varchar2,
p_event_type varchar2,
p_user_args varchar2
is
sess_store portal92.wwsto_api_session;
status varchar2(80);
station varchar2(80);
date_time varchar2(80);
sample varchar2(80);
species_code varchar2(80);
form_state varchar2(100);
begin
form_state := p_session.get_value_as_varchar2(
p_block_name => 'MASTER_BLOCK',
p_attribute_name => '_FORM_STATE');
if form_state = 'QUERY_AND_SAVE' then
sess_store := portal92.wwsto_api_session.load_session(
p_domain => 'sfnrc',
p_sub_domain => 'shrimp');
status := sess_store.get_attribute_as_varchar2(p_name => 'status');
if status = 'apply' then
station := sess_store.get_attribute_as_varchar2(p_name => 'station');
if station is not null then
p_session.set_shadow_value(
p_block_name => 'MASTER_BLOCK',
p_attribute_name => 'A_O_S_M_O_STATION__ID_K',
p_value => '='||station,
p_language => portal92.wwctx_api.get_nls_language );
end if;
date_time := sess_store.get_attribute_as_varchar2(p_name => 'date_time');
if date_time is not null then
p_session.set_shadow_value(
p_block_name => 'MASTER_BLOCK',
p_attribute_name => 'A_O_IN__SAMPLE_IN__DATE_TIME_K',
p_value => '='||to_char(to_date(date_time,'yyyy/mm/dd hh24mi'),'yyyy/mm/dd hh24:mi'),
p_language => portal92.wwctx_api.get_nls_language);
end if;
sample := sess_store.get_attribute_as_varchar2(p_name => 'sample');
if sample is not null then
p_session.set_shadow_value(
p_block_name => 'MASTER_BLOCK',
p_attribute_name => 'A_OBSERVED_IN__SAMPLE_NUMBER_K',
p_value => '='||sample,
p_language => portal92.wwctx_api.get_nls_language);
end if;
species_code := sess_store.get_attribute_as_varchar2(p_name => 'species_code');
p_session.set_shadow_value(
p_block_name => 'MASTER_BLOCK',
p_attribute_name => 'A_S_I_PROJECT_SPECIES_CODE_K',
p_value => '='||species_code,
p_language => portal92.wwctx_api.get_nls_language );
sess_store.set_attribute(p_name => 'status',p_value => 'done');
sess_store.save_session;
p_session.save_session;
fish_size_form.wwv_master_gensys_1(
p_block_name => p_block_name,
p_object_name => p_object_name,
p_instance => p_instance,
p_event_type => p_event_type,
p_user_args => p_user_args,
p_session => p_session );
end if;
end if;
end;
What I'm missing here.
Aantoliy.Say, I click on Update Push button. This will invoke a LOV that will occurs 5 times and then display the header and detail record.
Even if, I am able to get the records in the canvas, I am not able to update the records of the master. The record_status is in INSERT mode of the header block. Interestingly, if i click 2nd time on update button and then get the records after executing LOV, the query enters the query mode and I am able to update the records then.
Please suggest how to overcome the problem on a sigle click on UPDATE button. -
How do I get and pass Master-Detail rowid to another form in query mode?
I am trying to get the rowid of my master record passed to
another form in query mode. This is necessary because, I need to
have a way to show other detail tables for my master record. I
have been successful in calling the other forms, but only if I
hard code the rowid(or Primary Key).
Ultimately a "Tabbed" HTML table for each supporting detail
table that I have would be perfect. Any help would be greatly
appreciated. Thanks.correct me if I am wrong, is this a 9iAS (Application Server)
related question? This forum is for 9iAS only.
Regards,
--Tao
Maybe you are looking for
-
I do not have the Driver folder in this folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support like it says I should and my Apple Iphone appears in Portable Devices only, not in Universal devices. I tried uninstalling the driver and r
-
AlwaysOn: primary sync or async?
Hi, I succesfully setup an AlwaysOn between two sql2014 servers for development purposes. I configured both the primary and the secondary as synchronous. Now developers say that it is slower than one single server, and they are right because this con
-
Error when Importing EBIZ Application Templates
Hello I recently have set up a new single server 3.03 VM environment that uses local storage for the repository. I am trying to import the E Business Application layer templates from in VM manager and I am getting the following error. This is a multi
-
Trackpad click bar not working correctly after getting a keyboard replacement.
I just got my whole keyboard replaced two days ago due to a sticking "m" problem on my 2008 macbook pro. They didn't replace my trackpad, but now, it seems that my trackpad clicker will only respond if I apply a lot of pressure to the middle of the
-
Hi I am working on PO Requisitions. I have an attachment in header level and no attachment at line level but two line items are added to the requisition. When I tried to fetch attached document details from fnd_attached_documents, the results are sho