Re:Rebate Agreement Setup for CRM 2007

Hello Friends,
Essentially, when we are setting up Rebate agreement types in ECC in customizing, We need to specify a Settlement document type.
Given that with CRM 2007, the rebate agreement will not be used for settlement is there any thing that they can do to not specify the Settlement document type. Since we have to specify a Settlement document type, can anyone one give  guidance regarding customizing/configuring the Settlement Document Type?. Also that it should not create the Accounting document.
Thanks,
Julie

check the number range in ECC for this Reabte.
Can you give me the BDOC error which is triggered and The out bound queue also sholud be in error.
Check the out bound queue and try and reprocess that i think it wll have the dump in ECC system.
please check that dump and take corrective actions.
thanks
Kumar

Similar Messages

  • Error while building B2B for CRM 2007

    Hi All
    I am trying to make few changes in B2B application for CRM 2007.
    I have created projects for crmisawebb2bsap.com and  crmhomeshrextsap.com
    But whenever I try to build anyone of them.
    There is a error.
    Build log -
    Development Component Build (2009-07-28 12:14:18)
      Component name: crm/b2b_2
      Component vendor: sap.com
      SC compartment: sap.com_SAP-CRMAPP_1
        Source code location: http://xxx/sap.com_SAP-CRMAPP/dev/inactive/DCs/sap.com/crm/b2b_2/_comp/
      DC root folder: C:\Documents and Settings\.dtc\4\DCs\sap.com\crm\b2b_2\_comp\
      DC type: J2EE
      DC subtype: Enterprise Application
    DC Model check:
              [dcmake] All used DCs are available locally
              [dcmake] ERROR: Check for used DCs failed: Cannot build because used component is broken: sap.com/crm/isa/web/b2b( sap.com_SAP-SHRWEB_1)
              [dcmake] Build failed with errors.
    Please advice me how to proceed.
    Thanks
    Pratyush

    Did you find the issue? I'm trying to install binutils and the gcc toolchain on my laptop.  I was able to get it to work (randomly) on my desktop a year ago (http://nakedproof.blogspot.com/2012/09/ … linux.html), but the same steps aren't working anymore.

  • Disp+work.EXE stopped when installing NW07 for CRM 2007 on Maxdb Windows

    Hi,
    I am installing NW07 for CRM 2007 on Maxdb 7.7 and Windows 2004 64bit.
    The installer cannot start the dispatcher on step 32. The dispatcher starts with green and is running  a while but Dialog queue is standstill. After few secodes the dispatcher changes to yellow as become disp+work.EXE stopped.
    Any advice? I have checked the RAM and log sizes etc and they seem to be ok. Database is running ok.
    System cannot connect the database?
    Here is dev_w0 file contets:
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      01
    sid        XCR
    systemid   562 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    144
    intno      20050900
    make:      multithreaded, Unicode, 64 bit, optimized
    pid        2260
    Sun Nov 16 16:56:01 2008
    kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
    length of sys_adm_ext is 576 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (01 2260) [dpxxdisp.c   1243]
         shared lib "dw_xml.dll" version 144 successfully loaded
         shared lib "dw_xtc.dll" version 144 successfully loaded
         shared lib "dw_stl.dll" version 144 successfully loaded
         shared lib "dw_gui.dll" version 144 successfully loaded
         shared lib "dw_mdm.dll" version 144 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3901
    Sun Nov 16 16:56:06 2008
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5371]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >ESITV016LAB_XCR_01                      <
    DpShMCreate: sizeof(wp_adm)          25168     (1480)
    DpShMCreate: sizeof(tm_adm)          5652128     (28120)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
    DpShMCreate: sizeof(comm_adm)          552080     (1088)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (104)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1864)
    DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000EE70050, size: 6348592)
    DpShMCreate: allocated sys_adm at 000000000EE70050
    DpShMCreate: allocated wp_adm at 000000000EE72150
    DpShMCreate: allocated tm_adm_list at 000000000EE783A0
    DpShMCreate: allocated tm_adm at 000000000EE78400
    DpShMCreate: allocated wp_ca_adm at 000000000F3DC2A0
    DpShMCreate: allocated appc_ca_adm at 000000000F3E2060
    DpShMCreate: allocated comm_adm at 000000000F3E3FA0
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 000000000F46AC30
    DpShMCreate: allocated gw_adm at 000000000F46ACB0
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 000000000F46ACE0
    DpShMCreate: allocated wall_adm at 000000000F46ACF0
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    ThTaskStatus: rdisp/reset_online_during_debug 0
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 4096 kByte.
    Using implementation view
    <EsNT> Using memory model view.
    <EsNT> Memory Reset disabled as NT default
    <ES> 127 blocks reserved for free list.
    ES initialized.
    Sun Nov 16 16:56:07 2008
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1633]
    ***LOG Q0K=> DpMsAttach, mscon ( ESITV016LAB) [dpxxdisp.c   11822]
    DpStartStopMsg: send start message (myname is >ESITV016LAB_XCR_01                      <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 144
    Release check o.K.
    Sun Nov 16 16:56:47 2008
    ERROR => DpHdlDeadWp: W0 (pid 1608) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W1 (pid 3940) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W2 (pid 636) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W3 (pid 3484) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W4 (pid 3504) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W5 (pid 1108) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W6 (pid 3512) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W7 (pid 3592) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W8 (pid 3616) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W9 (pid 3608) died [dpxxdisp.c   14532]
    my types changed after wp death/restart 0xbf --> 0xbe
    ERROR => DpHdlDeadWp: W10 (pid 3368) died [dpxxdisp.c   14532]
    my types changed after wp death/restart 0xbe --> 0xbc
    ERROR => DpHdlDeadWp: W11 (pid 1388) died [dpxxdisp.c   14532]
    my types changed after wp death/restart 0xbc --> 0xb8
    ERROR => DpHdlDeadWp: W12 (pid 3276) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W13 (pid 1256) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W14 (pid 3400) died [dpxxdisp.c   14532]
    my types changed after wp death/restart 0xb8 --> 0xb0
    ERROR => DpHdlDeadWp: W15 (pid 2376) died [dpxxdisp.c   14532]
    my types changed after wp death/restart 0xb0 --> 0xa0
    ERROR => DpHdlDeadWp: W16 (pid 3032) died [dpxxdisp.c   14532]
    my types changed after wp death/restart 0xa0 --> 0x80
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:56:57 2008
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)               Sun Nov 16 14:56:57 2008
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program          Cl  User         Action                    Table
    0 DIA     1608 Ended         no      1   0        0                                                                         
    1 DIA     3940 Ended         no      1   0        0                                                                         
    2 DIA      636 Ended         no      1   0        0                                                                         
    3 DIA     3484 Ended         no      1   0        0                                                                         
    4 DIA     3504 Ended         no      1   0        0                                                                         
    5 DIA     1108 Ended         no      1   0        0                                                                         
    6 DIA     3512 Ended         no      1   0        0                                                                         
    7 DIA     3592 Ended         no      1   0        0                                                                         
    8 DIA     3616 Ended         no      1   0        0                                                                         
    9 DIA     3608 Ended         no      1   0        0                                                                         
    10 UPD     3368 Ended         no      1   0        0                                                                         
    11 ENQ     1388 Ended         no      1   0        0                                                                         
    12 BTC     3276 Ended         no      1   0        0                                                                         
    13 BTC     1256 Ended         no      1   0        0                                                                         
    14 BTC     3400 Ended         no      1   0        0                                                                         
    15 SPO     2376 Ended         no      1   0        0                                                                         
    16 UP2     3032 Ended         no      1   0        0                                                                         
    Dispatcher Queue Statistics               Sun Nov 16 14:56:57 2008
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    2
    2000
    6
    6
    --------++++--
    +
    DIA
    5
    5
    2000
    5
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          12
    wake_evt_udp_now     0
    wake events           total     8,  udp     7 ( 87%),  shm     1 ( 12%)
    since last update     total     8,  udp     7 ( 87%),  shm     1 ( 12%)
    Dump of tm_adm structure:               Sun Nov 16 14:56:57 2008
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Sun Nov 16 14:56:57 2008
    =============================
    Slots: 300, Used: 1, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    0
    DISPATCHER
    -1
    WPCAAD000
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:02 2008
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >ESITV016LAB_XCR_01                      < (normal)
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes
    Stop gateway
    killing process (4076) (SOFT_KILL)
    Stop icman
    killing process (3800) (SOFT_KILL)
    Terminate gui connections
    wait for end of work processes
    wait for end of gateway
    [DpProcDied] Process lives  (PID:4076  HANDLE:388)
    waiting for termination of gateway ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:03 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:4076  HANDLE:388)
    wait for end of icman
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:04 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:05 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:06 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:07 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:08 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:09 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:10 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:11 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:12 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:13 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:14 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:3800  HANDLE:396)
    DpStartStopMsg: send stop message (myname is >ESITV016LAB_XCR_01                      <)
    NiIMyHostName: hostname = 'ESITV016LAB'
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
    DpConvertRequest: net size = 189 bytes
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
    MsINiWrite: sent 562 bytes
    send msg (len 110+452) to name                    -, type 4, key -
    DpStartStopMsg: stop msg sent
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    NiIRead: read for hdl 2 timed out (0ms)
    DpHalt: no more messages from the message server
    DpHalt: send keepalive to synchronize with the message server
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
    MsINiWrite: sent 114 bytes
    send msg (len 110+4) to name           MSG_SERVER, type 0, key -
    MsSndName: MS_NOOP ok
    Send 4 bytes to MSG_SERVER
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    NiIPeek: peek successful for hdl 2 (r)
    NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=114
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 114 bytes
    MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
    Received 4 bytes from MSG_SERVER                             
    Received opcode MS_NOOP from msg_server, reply MSOP_OK
    MsOpReceive: ok
    MsSendKeepalive : keepalive sent to message server
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    Sun Nov 16 16:57:15 2008
    NiIPeek: peek for hdl 2 timed out (r; 1000ms)
    NiIRead: read for hdl 2 timed out (1000ms)
    DpHalt: no more messages from the message server
    DpHalt: sync with message server o.k.
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   12168]
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
    SiSelNSet: set events of sock 312 to: ---
    NiBufISelRemove: remove hdl 2 from set0
    SiSelNRemove: removed sock 312 (pos=2)
    SiSelNRemove: removed sock 312
    NiSelIRemove: removed hdl 2
    MBUF state OFF
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/17
    LOCK WP ca_blk 1
    make DISP owner of wp_ca_blk 1
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
    MBUF component DOWN
    NiICloseHandle: shutdown and close hdl 2 / sock 312
    NiBufIClose: clear extension for hdl 2
    MsIDetach: detach MS-system
    cleanup EM
    EsCleanup ....
    EmCleanup() -> 0
    Es2Cleanup: Cleanup ES2
    ***LOG Q05=> DpHalt, DPStop ( 2260) [dpxxdisp.c   10421]
    Good Bye .....
    BR,
    Kari

    Hi,
    here is the right log content:
    trc file: "dev_w0", trc level: 1, release: "700"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, MJ
    B 
    B Mon Nov 17 10:24:39 2008
    B  create_con (con_name=R/3)
    B  *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
    [dbcon.c      4537]
    M sysno      01
    M sid        XCR
    M systemid   562 (PC with Windows NT)
    M relno      7000
    M patchlevel 0
    M patchno    144
    M intno      20050900
    M make:      multithreaded, Unicode, 64 bit, optimized
    M pid        2184
    M
    M  kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
    M  length of sys_adm_ext is 576 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2184) [dpxxdisp.c   1305]
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M 
    M Mon Nov 17 10:24:40 2008
    M  DpShMCreate: sizeof(wp_adm)          25168     (1480)
    M  DpShMCreate: sizeof(tm_adm)          5652128     (28120)
    M  DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    M  DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
    M  DpShMCreate: sizeof(comm_adm)          552080     (1088)
    M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    M  DpShMCreate: sizeof(slock_adm)          0     (104)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)          0     (72)
    M  DpShMCreate: sizeof(vmc_adm)          0     (1864)
    M  DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
    M  DpShMCreate: sizeof(gw_adm)     48
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 0000000010E70050, size: 6348592)
    M  DpShMCreate: allocated sys_adm at 0000000010E70050
    M  DpShMCreate: allocated wp_adm at 0000000010E72150
    M  DpShMCreate: allocated tm_adm_list at 0000000010E783A0
    M  DpShMCreate: allocated tm_adm at 0000000010E78400
    M  DpShMCreate: allocated wp_ca_adm at 00000000113DC2A0
    M  DpShMCreate: allocated appc_ca_adm at 00000000113E2060
    M  DpShMCreate: allocated comm_adm at 00000000113E3FA0
    M  DpShMCreate: system runs without slock table
    M  DpShMCreate: system runs without file table
    M  DpShMCreate: allocated vmc_adm_list at 000000001146AC30
    M  DpShMCreate: allocated gw_adm at 000000001146ACB0
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 000000001146ACE0
    M  DpShMCreate: allocated wall_adm at 000000001146ACF0
    M  ThTaskStatus: rdisp/reset_online_during_debug 0
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation view
    X  <EsNT> Using memory model view.
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M 
    M Mon Nov 17 10:24:41 2008
    M  ThInit: running on host ESITV016LAB
    M  calling db_connect ...
    B  create_con (con_name=R/3)
    B  *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
    [dbcon.c      4537]
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 008192) [thxxhead.c   1440]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10468]
    M 
    M  Info for wp 0
    M 
    M    stat = WP_RUN
    M    waiting_for = NO_WAITING
    M    reqtype = DP_RQ_DIAWP
    M    act_reqtype = NO_REQTYPE
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source =
    M    last_tid = 0
    M    last_mode = 0
    M    semaphore = 0
    M    act_cs_count = 0
    M    csTrack = 0
    M    csTrackRwExcl = 0
    M    csTrackRwShrd = 0
    M    mode_cleaned_counter = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    attachedVm = no VM
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server ESITV016LAB_XCR_01 on host ESITV016LAB (wp 0)
    M  *  ERROR       ThInit: db_connect
    M  *
    M  *  TIME        Mon Nov 17 10:24:41 2008
    M  *  RELEASE     700
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          13
    M  *  MODULE      thxxhead.c
    M  *  LINE        10688
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************
    M 
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   724]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  261]
    M  Entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 2184) [dpnttool.c   327]
    BR,
    Kari

  • Business pacakge for CRM 2007

    Hi,
    we just installed CRM 2007 system. Is there any business pacakge available for CRM 2007 (as in case of CRM 2005). If so, Could you please let me know.
    Thanks
    Sri

    Hi Hari,
    We are planning to upgrade from CRM 5.0 to CRM 2007. Currently we are using CRM for Leads, Opportunity and Account & Contact Management with PCUI front end. We do have some customized iViews for Sales People and Customers. Could you please mail me the step-by-step procedure to upgrade CRM 5.0 to CRM 2007 to [email protected]
    Please its urgent. Thanks a million....
    Cheers,
    Amit

  • Authorization restriction for CRM 2007

    Dear Experts,
    We are in process of defining the authorization matrix for CRM 2007 for end users who will be using Web UI.
    Here my requirement is the service orders created by USER1 should not be displayed by USER2 and vice-versa when they do a search in both Web UI and GUI in Tx CRMD_ORDER for service orders.
    Please let me know how can I acheive this and what is the auth. object for the same.
    Thanks & Regards,
    Sharath

    Dear babu,
    If I understood your request, you want that, only one user will be able to access the document. If you want to do that, this is the answer:
    At tcode PFCG you shoud set:
    First you must set what type of document will be avaible to the user, in this case Z020.
    CRM_ORD_PR: PR_TYPE 'Z020',ACTVT '*'
    Next you must set which activities they will be able to do (notice, you must set the same field in the previsou object(
    CRM_ACT: ACTVT u2018*u2019
    And then you set which partner function or partner category are able to access the document, here is the main point !
    In this example I set that only users who has Partner Category (not partner function) Employee Responsible (std partner category 0008) are able to access the document
    CRM_ORD_OP: ACTVT '', PARTN_FCT '', PARTN_FCTT '0008'
    Here you can notice again field ACTVT, here you will set what user are able to do, "*" means everything, "1" = create, "2" = modify, etc. (I can see the list at PFCG, adding the auth. object to the PFCG profile).
    I notice only std partner function or partner category works with this object. I sent a message to sap support, and they confirm that, so if your user has Z partner funcition or category it is not possible to do that.
    Summary, your user must be present in the partner list of the document, and they must have a partner function or partner category std. It is possible to set together both values PARTN_FCT  and PARTN_FCTT, but I think it is not necessary.
    The easy way to do that is, user who will be able to access the document, must be the employee responsible.
    This help is very usefull
    http://help.sap.com/saphelp_crm60/helpdata/en/4a/b9f63a8ab2c745e10000000a114084/frameset.htm
    Regards,
    Lalas
    ps.: As you should know, only one partner function must have partner category Employee Responsible, in the partner det. procedure, otherwise, you will get error message in your application.

  • Where can we get the media for CRM 2007?

    We want to get the media for CRM 2007 to begin our upgrade. My understanding is that it is now in general release.
    Where can we get the media? There are no links in the marketplace.
    Thanks

    I believe this is released for United States and Germany only.  I know you can order the physical media by submitting an OSS message under component: XX-SER-SWFL-SHIP.  You can also talk to your SAP account executive about getting the software.
    Take care,
    Stephen

  • ACE for CRM 2007-AFO method not getting called!

    Hi Experts,
    I am trying to implement ACE for CRM 2007.The only issue/concern is the Actor From Object(AFO) method is not being called even once.
    I was assuming that every method is called at the time of right's activation.
    I placed breakpoints in all the 5 methods, but only method Actor from User(AFU) and Object by Filter(OBF) were being called.
    Can anybody suggest at what point the method-Get Actors From Objects is called?
    Thanks and Regards,
    Rohit

    Hi Rohit,
    the method Actors-For-Object isnt used any more by SAP. Always use method Actors-For-Objects.
    This method should be called, when objects pass the method "object_by_filter" (runtime --> check_object..., activation --> get_object..).
    Perhaps there are no objects passing your OBF-methods? Can you check the output of your method?
    Regards,
    Mario

  • What are the steps for adding a new field to the ST for CRM 2007?.

    Yeah, I know it's a basic question. I'm fairly familiar with CRM 5.0 but 2007 is new to me and there a good few changes.
    If I need to add a new field (probably with some processing to set its value) to the Service ticket what would be the steps I need to take to achieve this in CRM  2007?.
    Your help would be much appreciated.
    Jas.

    Are we talking about the EEW Business objects displayed in the EEWB as there is no business object called 'CRM OPPORTUNITY', but there is one called 'OPPORTUNITY'. Just wanted to make sure I was on the right track.
    So, as I need to change the service ticket it would mean that my transaction type will be service request,or whatever the shorted value is, is that correct?.
    I can see the transaction types in table CRMC_PROC_TYPE_T, although it looks like I need to pick SRVO (Service order) at a guess, and if this is right I'm looking for the EEW Business object to match. But it feels like guesswork to me. For example, I could choose EEW Business object 'SERVICE_TRANSACTION' which has an Extension type of 'CUSTOMER_H', or I could choose EEW Business object 'SERVICE_CONTRACT' or 'SERVICE_CONFIRMATION', although the last is unlikely. But, my point is there is so much open to interpreatation, and I'm expecting it to be more exact. Perhaps I'm just missing something.
    Jas.
    Edited by: Jason Stratham on Sep 4, 2009 2:30 PM
    Edited by: Jason Stratham on Sep 4, 2009 2:39 PM

  • FAQ: User Interface Guidelines for CRM 2007 are now available

    The CRM UI Concept Team has made the UI Guidelines for CRM Web Client User Interface (CRM 2007 UI) available to the BPX community:
    This document provides an overview of the on-premise as well as the off-premise versions of the SAP CRM Web Client User Interface (UI). It contains the properties and principles of the SAP CRM Web Client UI that are already committed and available. For planned features, refer to the corresponding specification documents.
    The information in the guidelines starts with general topics, followed by details. The sections are organized with high-level topics like Page Types and Navigation Schema first, followed by the consecutive sections describing which building blocks and elements of the UI populate the various pages. A section typically starts with one or more screenshots of a central UI element with a generic explanation. The subsequent sections explain the detailed aspects of each element.
    We hope that you will find this information useful.
    Enjoy the new CRM UI! [UI Guidelines for CRM Web Client User Interface (CRM 2007 UI)_ |http://www.sapdesignguild.org/resources/CRM-UI-Guidelines-Customers.pdf]
    Edited by: Zhaojie Liu on Jun 10, 2009 10:08 AM

    Hi,
    not sure why your download stops.. you can also try to download via this link: [http://www.sapdesignguild.org/resources/CRM-UI-Guidelines-Customers.pdf|http://www.sapdesignguild.org/resources/CRM-UI-Guidelines-Customers.pdf] (Document is 17,4MB of size)
    Here the guidelines also have been posted together with an article about the CRM 2007 Web Client UI.
    Hope this helps
    Best regards
    Ingo

  • User Interface Guidelines for CRM 2007 are now available

    The CRM UI Concept Team has made the [UI Guidelines for CRM Web Client User Interface (CRM 2007 UI)|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/302d8152-002b-2b10-34bd-9ff3c712dd4b] available to the BPX community:
    This document provides an overview of the on-premise as well as the off-premise versions of the SAP CRM Web Client User Interface (UI). It contains the properties and principles of the SAP CRM Web Client UI that are already committed and available. For planned features, refer to the corresponding specification documents.
    The information in the guidelines starts with general topics, followed by details. The sections are organized with high-level topics like Page Types and Navigation Schema first, followed by the consecutive sections describing which building blocks and elements of the UI populate the various pages. A section typically starts with one or more screenshots of a central UI element with a generic explanation. The subsequent sections explain the detailed aspects of each element.
    We hope that you will find this information useful.
    Enjoy the new CRM UI!
    Feel free to provide your feedback.
    Edited by: Florian Weigmann  on Jul 17, 2008 9:14 PM

    Hi,
    not sure why your download stops.. you can also try to download via this link: [http://www.sapdesignguild.org/resources/CRM-UI-Guidelines-Customers.pdf|http://www.sapdesignguild.org/resources/CRM-UI-Guidelines-Customers.pdf] (Document is 17,4MB of size)
    Here the guidelines also have been posted together with an article about the CRM 2007 Web Client UI.
    Hope this helps
    Best regards
    Ingo

  • Configuring Fact sheet for CRM 2007

    Hi guys
    Went through best prcatice B08 and configured necessary steps for my factsheet
    Also checked previous topic discussions and found this subject header under this forum Configuring Fact sheet in IC CRM 2007 : Pls help
    I did exactly as said, factsheet shows under my nav bar, but when i confirm BP and navigate to factheet. It is not showing default view which inlcudes Ibase, Email, Lead and so on
    All I want to see is my master data marketing attributes, physical address and previous transactions of that BP
    Please advice what to do or what Im missing
    Thanks
    Jogi

    Hi,
    In component BSP_DLC_FS and View factsheetyou can select the page type and once the Layout type is chosen, you can select your Fact sheet views from available Fact Sheet Views and there you can assign your views.I think you must have activated the fact sheet button for your PFCG Role.
    I went to Component BSP_DLC_FS and clicked on display.
    Went to views and selected BSP_DLC_FS/factsheet. Where exactly do I select the page types and layouts and my factsheet views? Still fairly new to the the BSP_WD_CMPWB  so please excuse
    Thanks Jogi

  • Rebate agreements: Turnover for archived invoices cannot be displayed

    We have implemented a check routine in archiving which prevents rebate relevant invoices from being archived before the rebate agreement is settled.
    As soon as the rebate agreement is settled invoices may be archived. That means that the turnover display (verfication level ,All documents') of a settled rebate agreement does not necessarily show all invoices (if some of them are already archived).
    As a possible solution for that problem an enhancement can be implemented (as fas as i have investigated the coding) where you can read additional data from archived invoices and add them to to the verification list.
    Does anyone has had experience with that problem respectively implemented a solution for that ?
    Thanks a lot for your help,
    Michael

    Hello Michael
    We faced a lot of issue with rebates because of the archiving frequency of invoices.If you check the verifiction level
    it should still diplay the invoices.
    Why do they want to view the sales volume for the settled rebate agreement?
    After exploring all the alternatives we decided to reduce the validity periods within the archiving period of invoices (for example
    we had 3 years validity period whereas the archiving program archives invoices past 2 years).This resolved
    a lot of issues for us especially the entries in VBOX were reduced which had sometimes resulted in tbale overflows.
    I do not know if this will solve your problem but any how wanted to share our experience.
    Thanks
    Vikas

  • Creating a Rebate agreement doc for multiple co codes

    Hi,
    To enable settling one rebate agreement across multiple company codes.
    We have a scenario, to accomodate on Rebage agreement type for multiple company codes,
    and to do the settlement for the billing documents created in these multiple company codes.
    I think it is a standard processes, but how to execute this to get the results,pls suggest.
    Regards
    AK

    Hi Franck,
    Thanks for your prompt feedback,
    Further to the issue I would like to clarify couple of other issues related to
    the processing of one Rebate agreement for multiple company codes.
    1. This is a client requirement, which need to be addressed through
    enhancements since standard possibility is ruled out, we have tried with this scenario but sales area is a mandatory entry while creating the agreement type (Tcode-VBO1).
    2.  If it is feasible could you please provide the configuration steps for the scenario or any enhancements related to this scenario for implementing.
    Kindly explain what do you mean by IMHO?
    Regards
    AK

  • Rebate agreement setting for new customer

    I have a scenario, where business has a customer who had some sales and now that the cusotmer has changed his name and new customer is created for that. old customer has been set for deletion. now business wants to transfer the old customer sales data to new customer inorder to create the rebate agreements. as i understand rebate agrements are created based on customer and cannot be created for old customer and accru another customers sales. did any one came across such scenario, please give your suggestion.

    Hi
    No it is not, it is accrued into the accruals account based on the accruals value you have defined in the condition record of the agreement.
    Example scale :
    scale value            Amount             Accruals
           0,00 EUR         5,000- %          7,000-
      100,00                   8,000-                       
    1.000,00                12,000-     
    If you create a real invoice for less than 100 Euro according to your current understanding the 5% rate would apply and if the invoice value was over 100 Euro the 8% rate would apply. In both cases the 7% accrual rate would apply with no consideration of the scale.               
    When you create rebate condition with scales, for the individual customer billing document,the system will take the first scale level / the accruals amount. Only during the final settlement, will the detailed scales condition be taken into consideration for the real customer payment.
    Check this note: 392711 - Rebate conditions with scales
    Most customer's would maintain their accruals amount as an average based on the business reality when using rebate scales.
    Hope it helps
    Kind regards
    Brian

  • Rebate agreement setup in SAP based on quantity purchased

    Hi Experts,
    Question relating to rebates and commission.
    I have requirement to create rebate agreement on quantity purchased. If customer buys 1KG of material then the unit of measurment i.e., KG should be conveted to Pound and accrue $2.54 per pound.
    Please give some guidance on how to set this up in SAP.
    Thank you

    Hi Dayanand,
    There is a Rebate Condition Type available in standard, BO02-Material Rebate use that rebate condition type in your pricing procedure and try to create the condition record or rebate agreement with customer and material and in unit of measure you can give "pounds" and if in material master in additional data conversion factor is maintained i.e., 1 KG is equal how many pounds, system will not ask you in rebate agreement and if not maintained system will prompt a message as below
    mention the conversion factor how pounds equal to kg and request you to test the cycle throughly
    Hope this will help u

Maybe you are looking for

  • Issue with OLEDB Source in BIML

    Hi all, I am trying to automate a data flow with BIML. I am using an expression to build my SQL dynamically based on input parameter. Sparing details of the use case, I need this flexibility in my project. I am having 1 master table which consists of

  • Report a user!!

    I want to report a user, one more time then just blocking, because skype have to erase that account! She is a he and blackmail people!! Soo what to do?? Please help!! Solved! Go to Solution.

  • Diagram or vi for Sound Pressure Level Meter (SPL)

    Need help for implementing a Sound Pressure Level Meter (SPL) with LabVIEW 7.1 or 6.3....I must use a microfone and a laptop for my project.....Need diagram or ready vi ....!!! How can I make an A,B,C Weighting Filter vi for my Sound Pressure Level M

  • Should Solaris release 2 be used? (6isolaris2.tar)

    Solaris forms/reports release 2 contains forms 6.0.8.11.3 and reports 6.0.8.11.2. It is NOT a patch and contains later releases than 6i patch set one. Release 2 is also missing webDB. It also appears that the documentation has not been updated from t

  • How to use Time in Due Transition

    Hello All, I have a requirement when I have to fire a due transition based on time. lets say midnight of a certain date let assume the date is Jan 28, 2010 12:00:00 AM how can i do it since the due transition needs an interval and not time.