Re: Receiving and transmitting audio/video streams

Btw, i just want to ask, how can you transfer from one computer to another computer? using what? pls tell me. thanks a lot

hey every body i got a bit similar problem regarding ports,
thats is i am unable to send and receive audio at the same time using RTPManager is it JMF restriction i.e transmission is half duplex or what is it possible cause if u receive i cant send and viceversa :(
any help will be higly appreciated.
Thanks

Similar Messages

  • Audio/Video stream  &   MulticastSocket

    Hello to everybody!
    I want to send to many clients an audio/video stream (captured from mic/webcam) using MulticastSocket.
    I found in some code examples that MulticastSocket is used setting a byte array with a particular size for buffering data (sending and receiving phases).
    I want to ask you if you know what size I have to use for transmitting WELL audio/video stream captured from mic/cam. What is the best configuration?
    Thanks in advance!
    Best Regards.
    Luca___

    Hi,
    have you checked with your Internet Service Provider (ISP) yet ?
    Some ISPs make a disconnect at a specific time in order to prevent users from using it for purposes not allowed by the ISP.
    At least here in Germany this is common behaviour with most DSL provider.
    Regards
    Stefan

  • Clone DataSource for simultaneously  receiving and transmitting?

    Hi!
    I wrote an application that receives a video stream and transmits it to a client. The application works fine.
    But if I change it to a servlet I get a StreamCorruptedException ("type code out of range, is 0")
    The API sais: StreamCorruptedException is thrown when control information that was read from an object stream violates internal consistency checks.
    Why is this exception only thrown in the servlet?
    Might this be because I use this datasource for receiving and transmitting data?
    Do I have to use a cloned datasource?
    Help please...
    Deike

    Hi
    can u please send me ur code. it is very urgent requirement
    in our application. thanks in adavance
    sent it to this mail id : [email protected]
    regards
    Narendra

  • P2p audio video streaming throws permission error.

    hi,
    i am trying to do p2p audio video streaming using latest api & palyer version. But for guests, although the room has auto-promote=true, it throws permission error .
    Error: You need to have owner permissions for changing Multicast property
        atcom.adobe.rtc.sharedManagers::StreamManager/set streamMulticast()
        attraineravc/onSessionCreation()
        attraineravc/__cSession_creationComplete()
        atflash.events::EventDispatcher/dispatchEventFunction()
        atflash.events::EventDispatcher/dispatchEvent()
        atmx.core::UIComponent/dispatchEvent()
        atmx.core::UIComponent/set initialized()
        atmx.managers::LayoutManager/doPhasedInstantiation()
        atmx.managers::LayoutManager/validateNow()
        atmx.core::Application/resizeHandler()
    But when I login using my adobe developer account it seems to be working fine. (at least the above error is not show).
    What am I missing?

    Hi,
    You are trying to set streamMulticast property, and as it is a room level property you need to be a host to do that. Only users with owner role can set/unset multicast in a room.
    Its a one time setting and need not be set by each user. So removing the code that sets the streamMulticast by all guests would fix your issue.
    Thanks
    Arun

  • One RTPManager for both, receiving and transmitting

    Can I use one RTPManager for both, receiving and transmitting media data?
    I would create send stream and imlement appropriate update+ methods.
    Will it work?
    Regards!

    Ummm, you don't have to implement any methods if you don't want. The default RTPManager does it all for you. I think you may want to override some trigger functions, but...
    [http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/AVTransmit.html]
    [http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/AVReceive.html]

  • Is there an add-on to clearly show that data is being received and transmitted from my PC plus the rate of transfer ?

    Is there an add-on to clearly show that data is being received and transmitted from my PC plus the rate of transfer ?

    I take it you are referring to a alternative to Net Usage Extension which is still being maintained and is current for Firefox 3.6.*
    See https://support.mozilla.com/en-US/questions/750519
    mozillaZine/Sumo mod.

  • Nodata in the [DiskRead and Write]&[Network Received and Transmitted] of the reports

    Hello everyone!
    I'm a newbie.
    The problem is the column of [DiskRead and Write]&[Network Received and Transmitted] has nodata.The others are OK(CPU,Memory etc.).  I already set the base rate for [DiskRead and Write]&[Network Received and Transmitted]  and I do some operations like copy files from one to another VM in the VM. But it still 0.00 in the report .
    Can anybody tell me why? Is anything wrong in my vCenter Database?
    Thank you very much!

    Hello,
    Thanks for sending the data.
    The query that we asked you to run gives the values of network transmit-receive and disk read-write that CBM data collector has collected from VC.
    A closer look at the output of the query shows that CBM has been able to collect data for network received and transmit (resource_id=6) from VC. The attached report contains costs for network received and transmit.
    But there is no data for disk read and write (resource_id=2). So the report shows 0 costs for disk read and write.
    Now we need to know the cause of  absence of this data from CBM DB. As a first step, we will like to see if VC DB contains disk read-write related data. Can you please attach the output of following steps?
    1)  Please run following query on CBM DB
    select entity_moid from cb_vc_entity where vc_entity_id=(select vc_entity_id from cb_vc_entity_mapping where cb_entity_id=(select entity_id from cb_entity where entity_name='work_GJL'))
    This will give 'moid'. This moid should be used in the next query.
    2) Please run following queries on VC DB.
    We need outputs from 4 tables namely:
    i) VPXV_HIST_STAT_YEARLY
    ii) VPXV_HIST_STAT_MONTHLY
    iii) VPXV_HIST_STAT_WEEKLY
    iv) VPXV_HIST_STAT_DAILY
    Substitute <table name> in the following query with each one of these and store the outputs of different queries independently and attach here.
    select SAMPLE_TIME, SAMPLE_INTERVAL, STAT_VALUE from <table name> where ENTITY LIKE 'moid from above query' AND STAT_NAME = 'usage' and STAT_GROUP = 'disk' and STAT_ROLLUP_TYPE = 'average' order by SAMPLE_TIME
    Thanks,
    Mugdha

  • I downloaded Itunes 10.7 and my audio/video does't work know does anyone knows how to fix this problem, I downloaded Itunes 10.7 and my audio/video does't work know does anyone knows how to fix this problem

    I downloaded Itunes 10.7 and my audio/video does't work can anybody help me

    Could you walk us through the problem in some more detail, please?

  • No audio video streams upon import of .mov files?

    Hi... recently upgraded OS onto Intel 240 GB SSD. Running Widows 7 64 bit, clean re-install, 24 GB RAM, NIVIDIA Quadro FX 4800. I have been trying to optimize the system for maximum GPU accelerated effects while also taking advantage of the high speed read and write of my disk. OS runs on SSD, Adobe media cache on separate 2 TB eSATA connection, Media stored on external drive USB 3.0. Without getting into the fine details this is a snapshot of my workflow.
    The few problems I am encountering are some .mov files cannot be imported to PP. Error reads no audio or video stream in the files. I suspected metadata issues so tried to import with media browser and still no luck. These files worked perfectly before I began surgery 2 days ago on my computer. I have installed the latest version of quicktime and yet to no avail. Any recommendations here regarding my issue with imports or suggestions to benefit from my hardware would be appreciated.

    MOV is a wrapper, what is inside YOUR wrapper - Exactly what is INSIDE the video you are editing?
    Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    https://forums.adobe.com/thread/1070933 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

  • Audio/Video Stream Disconnects

    I have a problem with audio and video streams disconnecting. If I am listing to a audio stream or viewing a video stream it will disconnect everyday at the same time. I've had this problem for quite awhile now and have not been able to figure out what is causing the disconnect. Does anyone out there have a similar problem or any solutions to this problem.
    Thanks in advance...

    Hi,
    have you checked with your Internet Service Provider (ISP) yet ?
    Some ISPs make a disconnect at a specific time in order to prevent users from using it for purposes not allowed by the ISP.
    At least here in Germany this is common behaviour with most DSL provider.
    Regards
    Stefan

  • One way live audio-video streaming

    Hi
    First of all I want to be honest that I am a beginner with
    FMS2, actually I must have missed much not using it so far. So,
    excuse me, I am sure you will find my problem very easy to solve.
    Having a little experience with Flash I tried to do the
    following: I have 2 PC's in LAN. One of them has camera and
    microphone. I want to stream audio and video to the other computer
    - I only need 1-way live streaming audio-video connection.
    I have read some docs about streaming with FMS2 but I
    couldn't find out which of the PC's should have FMS2 (and Web
    server) - the one with camera and microphone or the other. And if
    the camera and microphone are on the server how audio and viveo
    should be captured and streamed to the client?
    I really need your help. Any idea would be appreciated.
    Thanks in advance!

    Thank you friends!
    Actually I managed to sort out the problem. And the problem
    was that I had not used before FMS at all. After I have read more
    documentation I established the connection using 2 PC-s (one to
    publish and one to plaY) and the 3-rd for FMServer and Web Server.
    By the way there was a little confusion about local and
    network access of .swf files, but now it is okay.
    Now I have a new challenge - to record published stream to
    files, for example about 30 minutes long. I want to record and
    store all them continuously - having all the records for 3 days for
    example. I am not sure now how to do that but I am working on it.
    Anyway, thank you for your assistance!

  • Flex Mobile iOS app, and http live video streaming Question.

    I have subbmitted our app (which is mostly a video playing app) to apple only to have it rejected because of the" 9.4: Video streaming content over a cellular network longer than 10 minutes must use HTTP Live and include a baseline 64 kbps audio-only HTTP Live stream" reason.  I was doing progressive download of the files, but now it looks like we will need to re-encode all of our media, which will probably take months and months. 
    My question is this:  We currently use Akamai as our current CDN, with thier HD Flash delivery system.  Their HD Flash is built to do dynamic bitrate streaming simmilar to Apple's HTTP Live.  If we re-encode our video to milti-bitrate and use the Akamai technology to do the adaptive streaming will this be good enough for Apple, or will we infact need to use their HTTP Live protocol.  Has anyone encountered this problem, or have any experience?  I would like to know before we re-encode all of our media only to find out that we will be forced to use Apples stuff instead.  Any help is much appreciated!

    Unless I am mistaken here, you must implement Apple's HTTP Live protocol for streams over ten minutes in length. There is a few options you can take:
    1. Split your streams into 9 minute segments and feed them consecutively in groups. (Apple actually offers a segmenting tool that even generates an index file via there Developer tools)
    2. Only enable full length streaming over WiFi
    3. Fully implement HTTP Live....
    Also, do not forgot that not only are you going to have to implement HTTP Live but you are going to have to ALSO include an audio only stream.

  • Audio/Video Streaming

    How do I stream live audio/video on my nokia N70 Music edition?

    I can't give you some code, but you should take a look at the java media framework
    http://java.sun.com/products/java-media/jmf/index.html
    Canbe interesting for you.

  • Mplayer and multiptle simultaneous video streams through xv

    While I was using nvidia drivers a while back, I could playback multiple simultaneous video streams through xv in mplayer without any problem. After recent change of video card and consequential move to open source radeon drivers, I've observed that I can play upmost one stream with gmplayer (it spits out an error about problems with opening the selected video out device - I can playback more files simultaneously using basic mplayer, although it spits the same error in console with every successive instance). Could someone enlighten me whether it's a standard behaviour of xv with radeon driver or maybe the problem lies elsewhere and it's omittable somehow?

    Tried it, but to the same result
    What I found out is that the user can play videos from console with framebuffer at least. Not that it helps..

  • Capturing, timestamping and saving a video stream from a webcam ?

    Hello everybody,
    Glad to be in this forum.
    I got to do a program in java doing :
    - a capture of a video stream from a webcam
    - adding time and date on it
    - saving the video stream in a video format compatible with linux and windows
    Is it possible to do that in java (using JMF I guess) ?
    Could anyone help me to progress on my project ?
    thx a lot
    agussi

    Hi agussi, yes, it's possible to do that in Java using JMF.
    I'm not a JMF expert, but I've found this code very useful: http://forum.java.sun.com/thread.jspa?threadID=570463&tstart=50
    This piece of code shows the webcam stream and you can take snapshots with it. With a little tweak you can do what you are expecting.
    I hope this helps.
    Ivan

Maybe you are looking for