Re:Regarding FTP
Hi,
I have developed one report but i need to place tht report in another server,
can any one tell me the FTP program logic , so tht i can place my report in their server.
Hi,
Check this link, It will help you.
https://forums.sdn.sap.com/click.jspa?searchID=3238753&messageID=2851734
Thanks,
Reward If Helpful.
Similar Messages
-
Hi
The below error i am getting using FTP adapter. After deploying the process only one time it is picking the file. But we are putting one more file in that directory it is not read the file.
Regarding this cause we are getting the below error. So,any one know this error pls help me.
<2010-08-16 16:34:19,523> <INFO> <default.collaxa.cube.activation>
<File Adapter::Inbound> Recovery still not possible after 20 attempts due to ORABPEL-11000
Invalid Activation parameter.
Activation parameter Physical/Logical Directory has invalid value {u02/test/FTPgetfile}.
Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable.
<2010-08-16 16:34:21,194> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> Managed Connection Created
<2010-08-16 16:34:21,194> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> Managed Connection Created
<2010-08-16 16:34:21,194> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> Connection Created
<2010-08-16 16:34:21,194> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> Connection Created
<2010-08-16 16:34:24,519> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> Managed Connection Created
<2010-08-16 16:34:24,519> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> Connection Created
<2010-08-16 16:34:34,418> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> Managed Connection Created
<2010-08-16 16:34:34,418> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> Connection Created
<2010-08-16 16:34:44,113> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> Managed Connection Created
<2010-08-16 16:34:44,113> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> Connection Created
<2010-08-16 16:34:45,175> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> Managed Connection Created
<2010-08-16 16:34:45,175> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> Connection Created
<2010-08-16 16:34:47,126> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> Managed Connection Created
<2010-08-16 16:34:47,126> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> Managed Connection Created
<2010-08-16 16:34:47,126> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> Connection Created
<2010-08-16 16:34:47,126> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> Connection Created
<2010-08-16 16:34:53,809> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> Managed Connection Created
<2010-08-16 16:34:53,809> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> Connection CreatedMaybe you know ftp error but i will post in here anyways.
The 550 error is a message from the server stating that the account you have currently logged in as does not have permission to perform the action you are attempting. You may be trying to upload to the wrong directory or trying to delete a file
I dont know exactly if it is a bug or a problem with permission on the ftp side. but i think that the folder that is containing the files, does not have permission to read (weird because you can retreive files). Also another problem is that the account does not have put priviliges and you are using it in another process to upload files. -
Need Information Regarding FTP Configurations
Hi Experts,
I have developed one scenario in that i will send the files through FTP poll.
I am using the File adapter as Receiver
I need some info regarding Comm Channel settings.
under FTP connection parameters what should i give for
server
port
username
password
who will provide the above information.
And do i need to have any details of legacy system.
please advise.
Thanks
BhaskarHi,
under FTP connection parameters what should i give for
server
port
username
password
who will provide the above information - The guys who are maintaining this FTP server or the application which is using this FTP server can provide you these details so that XI can connect to your this FTP server.....
And do i need to have any details of legacy system - See legacy system details as such are not required........but you need to know the FTP server details like the above information and directory information to put the files and the filename scheme which the legacy application is expecting for output files from XI system.
Regards,
Rajeev Gupta -
Blatant lie in Apple's tip regarding FTP in Finder
From this page:
http://www.apple.com/uk/pro/tips/ftp_files.html
"Once you’re “in”, you’ll see a folder — now you can just drag-and-drop the file you want to transfer into that folder and the transfer will begin."
You CANNOT do this in Finder under any version of OS X. You CANNOT upload a file by FTP using Finder.markmc78 wrote:
From this page:
http://www.apple.com/uk/pro/tips/ftp_files.html
"Once you’re “in”, you’ll see a folder — now you can just drag-and-drop the file you want to transfer into that folder and the transfer will begin."
You CANNOT do this in Finder under any version of OS X. You CANNOT upload a file by FTP using Finder.
Well spotted and I am sure that we will all sleep better knowing that this insignificant but critical to life issue has been found.
On the other hand, unless you can show that there was an intention to deceive your thread title could be taken as slander. Mistakes are permitted in the real world - particularly if you read the Terms of Use documentation more closely where you will most likely find it also says E&OE. -
hey guys,
Could somebody tell me whether below ftp command can be used in Solaris system also.
Currently used in UNIX system inside the ABAP program.
<b>ftp -nv</b>
need to know whether above ftp command can be used just like this in Solaris system.
Thanks.
BaashaHi Baasha
man ftp on Solaris (Solaris 9 in my case) gives you:
-n Does not attempt "auto-login" upon initial connection.
If auto-login is not disabled, ftp checks the .netrc
file in the user's home directory for an entry
describing an account on the remote machine. If no
entry exists, ftp will prompt for the login name of
the account on the remote machine (the default is the
login name on the local machine), and, if necessary,
prompts for a password and an account with which to
login.
-v Shows all responses from the remote server, as well as
report on data transfer statistics. This is turned on
by default if ftp is running interactively with its
input coming from the user's terminal.
Both switches are available and will do the same like on other Unix flavours. -
Path control regarding FTP-publishing
Hi,
I want to publish a website created with iWeb (version 3.0.4) and have some trouble eliminating the paths generated
by naming the website in iWeb.
Let's say my website is example.com and I have created 2 pages for this website called
page1.html and page2.html
I'd like the URLs for these pages to be example.com/page1.html and example.com/page2.html
but unfortunately iWeb inserts another path when publishing; the URLs come out as e.g.
example.com/file/page1.html or example.com/websitename/page1.hml (websitename depending
on how I call the website/project in the publication settings in iWeb)
Ist there a way to eliminate this additional path and hence to create the direct example.com/page1.html
that I'm looking for?
Thank you for your help.Discussed thousands of times in this forum. Here's my solution :
Avoiding the iWeb Sitename in the URL
Or search for it :
https://discussions.apple.com/search.jspa?resultTypes=&q=avoid+sitename&containe rName=iweb
http://www.google.com/search?q=avoid+iweb+sitename -
FTP Error in Internet sales during product catalogue replication
Hi all,
I am configuring the internet sales for demo purpose on CRM 2007-IDES system, when i am replicating the catalogue to isa it gives error regarding FTP.
Please give me the idea if iam using internal system not public ip at this time FTP server required or not.
If yes then how i can install this software and connect with crm system.
Please help
Regards
Apoorvahi,
during catalog replication the product pictures will be copied to the TREX server. The replication process uses ftp for copying the pictures. You can enable if you would like to replicate the pictures too. Try to disable this first and your replication should work fine.
Regards
Michael -
Hi!
I have some questions regarding FTP data transfer and programing message fields in SAP
1) How can I program the message fields in SAP?
How much effort do I invest on this issue?
2) We are about to replace our FTP-transfer in SAP-system from manuall to automatic (from location/city A --> to location/city B).
The current approach is/was to start batch-input manually.
How can we do this issue? Is there some ABAP-knowledge necessary or is that typical SAP-Basis (administrative) task?
Thank you very much
regards
AxelHi!
Are you saying that you want to upload text file using ftp, and run batch input automatically from executing ABAP program?
I would like to find the automatic way for FTP-data transfer frorm location 1 to location 2. My current solution based on manual execution of Batch-input, that transfers/pushes the data from location 1 to the location 2.
Thank you for your recommendation/information.
regards -
Windows 2012 FTPS erro 234 AUTH
Hi Everybody,
I used a Windows 2012 server with FTPS installed for a couple of weeks. My SSL certificate has expired and then I have replaced it.
I can connect internally with FileZilla or WinSCP but externally I get 234 AUTH command ok. Expecting TLS Negotiation.
I tried internally with CoreFTP and I get the same interesting message than when I connect externally with WinSCP or FileZilla.
234 AUTH command ok. Expecting TLS Negotiation.
Cert 'AF 27 9F 68 03 00 00 F5 F5 2E 5D FF FF FF CC E0 AA DD' specified...
Failed to find the certificate.
I spent a lot of time and tried to reinstall the old certificate but I have the same issue.
Please advise.
MrenbeHi Mrenbe,
Regarding FTP over SSL related issues, I suggest you refer to IIS experts for more professional support.
http://forums.iis.net/
In addition, here is a suggestion for you, please make sure that the new certificate is selected under the
FTP SSL Settings from IIS Manager.
More information for you:
Select an SSL Certificate
http://technet.microsoft.com/en-us/library/dd464021(v=ws.10).aspx
Best Regards,
Amy -
Map a port through Airport Extreme to access my NAS remotely through FTP
Hello Everyone,
Was hoping someone might be able to enlighten me. I recently purchased a WD ShareSpace. It has the ability to setup FTP access to it. I am currently using an Airport Extreme and I seem to be having trouble finding information on how to setup my AE to allow my WD be accessed outside my router. I have looked at the settings for port mapping and assume I need to setup a Service in there for FTP Access, but regarding all the UTP ports and addresses, I am a little lost.
I cant seem to find a simple site that kind of goes into details on more or less what is what, how this and that work. I do well with networking but a lot of this port mapping and forwarding stuff is somewhat new to me.
Any help would be great, thank you!
TimThe WD ShareSpace has a bunch of ways (it seems) to connect to it remotely, but I know that I would still need to open access up through the router.
It probably is not worth it. WD makes it seem easy and tells how to access the NAS by typing in my ip and all, but I get the feeling it is not as easy nor secure as they make it sound.
There is a built in menu regarding FTP through WD web configuration, so I got the impression it might be easier.
Simply all I want to do is access my music and movies from the NAS elsewhere. I get the feeling this is not the best move in regards to security.
Thanks! -
AQ/FTP adapter not working
I am a newbie to oracle interconnect 9i and learning it from the oracle documentation.
I successfully created DB to DB publish/subscribe example and worked on cross referencing as well. Now I am working on AQ and FTP examples. I have following doubts
1. I created the aqapp application for AQ example given in oracle interconnect 9i documentation. My adapter service started successfully.
When I execute the procedure given in the example, to enqueue the xml_raw_q1 queue then the procedure completes successfully but the adapter reacts nothing. I am not sure whether my message is enqueued or not and if it does then why my adapter don’t pick up the message.
2. Regarding FTP, I tried to develop an example for it but was not able to do so. In oracle documentation for FTP adapters, there is no demo example given in oracle documentation as was given for DB adapters. So if someone can provide the same or similar then it will be quite helpful to me to understand FTP adapters as well.Hi Emile,
This could happen when AE cache is not getting updated.
Goto SXI_CACHE.
Click "Goto" -> AE Cache and check if you get a green symbol with a message saying " Cache contents are up-to-date".
Regards,
Anish -
Hi All,
I need a clarification regarding FTP. Is FTP must for an MDM server. Can I get some documents for enabling FTP.
Regards,
Pramod
Edited by: Pramod Govindan on Apr 25, 2008 4:02 PMHi Pramod,
FTP server is used with MDM to get data in to MDM or out from MDM to other systems.FTP server pings to a specified location and pics up the file and put it to the other specified location(at the time of syndication).
For example.
suppose you are sending data from MDM to R\3 using XI as a middleware then in XI sender communication channel you will use FTP , So that the FTP server will ping into the ready folder of the outbound port of the MDM repository and pick up the XML file.And at the reciver end in XI reciver channel will be IDOC type so that the data will be transfered to R\3 (as R\3 transferes data using IDOCS).
for furthere help please follow the links.
/people/shabarish.vijayakumar/blog/2006/08/01/along-came-a-file-adapter-mr-ftp-and-rest-of-the-gang
/people/balas.gorla/blog/2006/09/27/mdm-xi-r3-integration
I hope it will give you some idea hoe ftp works.
Reward if Helpfull.
Thanks and Regards,
Vinay Yadav -
Let's Revisit MacOS Server's Passive FTP Problem
Mac OS X Server's built-in FTP server can't be configured to determine which ports above 1024 will be used for Passive FTP connections. More often than not, this means that clients behind NAT routers (for a variety of complicated reasons) can't discover which of the "high ports" are being used in their passive connection. Furthermore the Mac OS X administrator would have to open every port above 1024 to anticipate connections, severly weakening the security of the system.
The effect for the user is that their FTP client can connect, but can't list the contents of a directory or upload/download anything.
Here's a primer on the difference between Active and Passive FTP:
http://slacksite.com/other/ftp.html
Apple introduced a "solution" to the problem by making this addition to the Network Services manual sometime around 10.3 server:
"See if the client is using FTP passive mode, and turn it off. Passive mode causes the FTP server to open a connection on a dynamically determined port to the client, which could conflict with port filters set up in IP filter service. "
This was a tacit admission that MacOS's various FTP daemons over the years have unchangeable, precompiled configurations. The typical workaround was choppy, but workable: replace Apple's built-in FTP daemon with a fully configurable one like ProFTPd or PureFTPd, configure a narrow range of ports for your own security, and configure your firewall to match.
We're on Tiger server now and that's still in the Network Services manual. Leopard or whatever is looming. Will Apple ship an FTP server that works out-of-the-box with its own firewall this time? Any new thoughts or solutions?I think you need to do a little more research on FTP. Most of the actual problems you describe are inherent in FTP and nothing to do with any kind of Apple-inhibited FTP server.
For example, you say:
> Mac OS X Server's built-in FTP server can't be configured to determine which ports above 1024 will be used for Passive FTP connections
Not true. You can choose whatever port range you like using the portrange directive in /etc/ftpd.conf
By default this directive isn't set so the entire port range is used. Feel free to change that.
>The effect for the user is that their FTP client can connect, but can't list the contents of a directory or upload/download anything.
This is an inherent flaw in FTP, suffered by every FTP server on the market. Nothing to do with Apple.
> This was a tacit admission that MacOS's various FTP daemons over the years have unchangeable, precompiled configurations
Again, incorrect. The suggestion was a workaround for the FTP protocol restriction, not for Apple's implementation. I've been dealing with the exact same issues for years on various Sun servers I've run.
Most of the problems you describe regarding FTP and firewalls won't be solved at all in any future OS update - from any vendor. FTP was never designed with firewalls and security in mind. The only solution is to fix the underlying protocol, or use something different altogether. -
Ok so I got Muse working and I am trying out my first site. I insert a full screen video widget and the client uses Mac’s and they tell me it will not show in their browser. Which is Safari btw. I am a windows guy and it plays fine in IE 11. I have my own Linux web server and do not use Biz Cat. So in Muse I export as html to my local computer with all the files and assets etc. I use Muse to add files for upload and it generates the html with all the goodies. Why does it fail for Mac users? It is an mp4. Here is a test site I use until I get this fixed:http://baltimoregreenprint.com/ I tried to ftp publish in Muse but it fails. Any ideas? Thanks for help
Hi
I checked the site in safari/Mac and it works fine , I can see the video.
Please check if any plugin is installed in your clients browser which is preventing the video from playing.
If still same issue, please provide me the OS version with browser version details.
Regarding FTP issue, please check this thread :
http://forums.adobe.com/message/6132776#6132776
Thanks,
Sanjit -
Transformation activities in owb process flow
could someone tell me please about process flow in owb ( oracle warehouse builder) 10.2 . how we can associate a procedure name with transformation.
thanksrefer OWB10gR2 user's guide regarding FTP option.
http://download-uk.oracle.com/docs/cd/B31080_01/doc/nav/portal_booklist.htm
Maybe you are looking for
-
HOW DO I PRINT WITH CALENDARS IN ORDER?
help! i have multiple cals in my calendar. i would like them to print in the order i have them orgnized, when i print everything is not in the order they are in my cal. this is very frustraing, i need to see te same informatin in order every day acro
-
Will changes made to the white balance of my .mts files made in Lightroom
Will changes made to the white balance of my .mts files made in Lightroom be transferred with the file when I open in Premier Elements
-
hi does anyone have the configuration documents for ESS/MSS then pass it on to the following id [email protected] points would be rewarded Regards JM
-
Updated os now yahoo calendar doesn't appear/ need a fix!!
Turning iCloud on and off, resetting power, removing account and adding from scratch but yahoo calendar won't display??? Someone please help!!
-
Necesito ayuda, alguien habla español
Hola si alguien habla español me podría ayudar a bajar un wallpaper de una página que no se cómo hacerlo, la página de la cual quiero bajarlo es daily iPhone blog, gracias