Re-Register Quicktime Pro on New hard drive???

I've put a new, larger hard drive in my G4. I've gone the manual route in re-installing many of my programs.
Can anyone tell me how to re-register my $30 Quicktime Pro on my new hard drive?
Thanks,
dalano

To Apple Discussions!
Open QuickTime>QuickTime Preferences>Register

Similar Messages

I just replaced the hard drive on my macbook pro, reformatted new hard drive and copied over a backup from time machine now I have a kernel panic message (you must restart) - what do I do now?

i just replaced the hard drive on my macbook pro, reformatted new hard drive, installed a back up from time machine and now have kernel panic ( you must restart your computer) what do I need to do?

If you're able to boot, launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents – the text, please, not a screenshot. For privacy’s sake, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post "shutdownStall" or "hang" reports.
If you can't boot in the usual way, try a safe boot. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is slower than normal, and some things won’t work at all.

MacBook Pro 2009 new hard drive install results in very slow function and freezing

I just wanted to post my resolution to a problem that I had trouble finding an answer to on these forums.
Short version:
I replaced the hard drive in my 2009 MacBook Pro because the computer froze and upon reboot the Disk Utility said it was corrupted, but with the new hard drive the computer ran very slowly and often showed the spinning rainbow wheel. I replaced the SATA cable that connects the hard drive to the motherboard and it works perfectly once again.
Long version:
Recently my MacBook Pro (2009 running Snow Leopard) froze up and I performed a hard reset by holding down the power button. When I turned the computer back on it would not boot OS so I ran disk utility from the Snow Leopard install DVD. The test said the hard drive was corrupted, and since the computer is way past warranty I decided to change the drive out myself. I bought a 500GB Seagate Momentus 5400 Drive from Amazon, opened the computer and replaced the existing hard drive with the new one. When I first booted from the OS install DVD, my computer was not recognizing that any hard drive was present. I read somewhere on these forums that sometimes the formatting on new Seagate drives can't be read by MacBooks and they need to be reformatted using another computer, but I tried simply taking the hard drive out and putting it back in a couple of times thinking maybe I had just not plugged it in correctly. After the 4th attempt the hard drive magically showed up, and I was able to reformat the drive and install OS and even Windows XP on bootcamp.
Everything seemed to be okay but applications were running slowly considering this was a fresh drive and OS install. Over time, the computer started to hang more and more. In OS I would get the spinning rainbow wheel even when doing something as simple as opening a browser window in Chrome or trying to type into a text field. When I tried to use Windows it would simply freeze after only a short time and I'd have to do a hard reset.
I went to the Genius Bar at the Apple store which was unhelpful, so I continued searching through these forums to try to figure out the problem. I noticed a lot of people had trouble with the SATA cable that came with the computer because it's quite thin and delicate, and would get damaged when changing out the hard drive. However most of these people seemed to experience a question mark when starting up the computer, whereas mine would fully boot and be functional for a time. I thought it unlikely that a damaged cable could possibly leave the computer partially functional. Finally though I gave in a dropped the $26 for a new SATA cable on Amazon. As soon as I installed it the problem was fixed, and the computer runs as fast as when I first bought it. I don't know if I damaged the cable changing the hard drive (I was extremely careful) or if my original hard drive was not actually corrupted and the cable was already damaged. I mentioned the possibility of the cable being damaged at the Apple store and the representative said that often times they fail because people carry the laptop with one hand, and because of the way this model was designed this puts a lot of pressure right on that thin cable. Regardless, if you do plan on changing out your hard drive in your MacBook keep in mind that the SATA cable is sensitive, and that if you experience problems with a fresh hard drive and OS install the SATA cable is a likely culprit.

If you think you have either a hard drive or a cable problem, to the best of my knowledge the only product that can help isolate both of them is Scannerz. You can check it out at:
http://scsc-online.com/Scannerz.html
I think that's the correct link. If it isn't and you're interested and that's wrong, just google it. I'd also check out their downloads section, especially the sort of short document on using path isolation to detect and isolate problems.
Scannerz can detect both errors and irregularities. It uses the surface scan progress as a reference. Cable problems never show up at the same location because they're typically intermittent. Surface problems always show up at the exact same place. That's the only product (at least commercially available) that can do that.
I don't know if this information is of any value to you because it sort of sounds like you've already solved the problem, but it might be of use if you have problems in the future.
In any case, I've seen several posts on several different sites where people were reporting insulation break down on some of the SATA cables. Apparently the insulation breaks down and the cable starts shorting to the case.

Problem Installing XP Pro on New Hard Drive

Hi,
I 'm trying to install xp pro on a new Hard Drive and, following formatting, a RED slider went across the screen and a message; re-starting remove any disc from drive 'A' . At that point the screen went blank and hard drive light was lit. I took the xp disc out the CD drive and re-started I now get a screen asking me to shift-tab to display network boot option menu,at which point it is frozen ! Help please
Pete

Quote from: Fredrik Åsenius on 25-April-07, 01:09:49
It shuts down? Doesn't restart?
What is the difference in environment from the shop and your place?
Shutting down is normally - still - a sign of the processor turning itself off to protect itself. It's not alive long enough in BIOS, to make you see the temp?
I doubt you keep the computer in the cupboard, but it should anyway have about 50 cm free space in every direction (except downward of course).
Fredrik, The difference between home and shop, I keep the PC in a PC stand at ground level. I could improve its position slightly however, it has been sighted there for aroung eighteen months! The shop guy didn't seem overly concerned by the 49c temp, (he thought the fan was ok) which increased to around 56c with 1.5gb ram installed. When i tried to get into bios I was probably too late hitting delete key has it went to windows scan! After the problems I'd had last week with my original hard drive I didn't want to take any more risk's! Its seems obvious the cpu temp is affected with the extra ram, any ideas?
Thanks Pete

My Mac Pro had new hard drive installed. I downloaded the latest iPhoto application. All my photos have been restored to a folder which I dragged to the iPhoto icon. The photos are not down loading.

My Mac Pro had a new hard drive installed. Everything was restored by Carbonite except my photos. Carbonate restored them to a folder and the folder was dragged over the newly installed iPhoto app. The photos are not installing. What next?
Ron Rushford

What happens when you try File -> Add to Library?

Received macbook pro with new hard drive

I just got back my laptop today from a shop i had a warranty at and they installed a new hard drive and also a hard drive cable.
They gave me my old hard drive in a plastic bag and i was wondering if there was still anyway for me to get the stuff off of it because my latest backup was all the way in january which *****.
not sure if my old hard drive is suppose to have a cable connected because it doesnt. The problem with my macbook was i kept getting a white screen with a circle and dash going through it, during start up.
Is there anything i can buy to try and see if i can get the files off or what?
im not sure if the hard drive still works or what because they didnt tell me anything

Or something like this:
http://www.walmart.com/ip/40900062?wmlspartner=wlpa&adid=22222222227028516939&wl 0=&wl1=g&wl2=c&wl3=61188529929&wl4=&wl5=…
very cheap and versatile.

I had quicktime pro on crashed hard drive

Hi there,
How do I reinstall the quick time pro I had installed on the hard drive that crashed and was subsequently replaced.
Thanks.
rwa

Find the email or other place you got the QuickTime Pro key from, and put that key as well as the name you registered it to in the QuickTime pane of System Preferences.
(28638)

Recovering Quicktime Pro from a hard drive crash on a Windows based machine

How do I contact customer support for QuickTime Pro?
My registration code was activated. My computer crashed. I replaced the hard drive and upgraded the operating system from Windows Vista to Windows 7.
I need to have my registration code reset without spending more money!
Is that possible?
Thanks

Log in to the Apple Store using the same ID used in the purchase.
Click the "Downloadable Software" link to retrieve your serial number and name.
Open the QuickTime Control Panel and use copy/paste to enter that info and your current version of QuickTime will become "Pro".

Trouble upgrading to mountain loin after upgrading mac book pro with new hard drive and adding 8 megs ram

every time after I have upgraded my macbook pro I am unable to upgrade to mountion lion , it aways will either go blank and I have to start fresh from cd system going all the way till I get to last upgrade and then loss everything. any help or what is happening
<Edited by Host>

you are correct, I have had my mac at geek squad to correct this problem and they could not find the fix other thanit was a hard drive problem and they replaced the hard drive and that did not fix the problem, they said it could be the speed of the HD I used as a replacement ,which was 7200,o the nw one is 5800 yet I still or they could not upgrade . they were used a jump drive and they tried to down load from itunes no luck. I started out wth the install disk and stepped up ,what could be wrong?
Preferences
1
2
3
4
5
6
7
8
9
0
=
Backspace
Tab
q
w
e
r
t
y
u
i
o
p
Return
capslock
a
s
d
f
g
h
j
k
l
shift
`
z
x
c
v
b
n
m
shift
English
alt
alt
Preferences

I need to reactivate ACROBAT PRO on new hard drive

I've read all the similar questions and responses from users and ADOBE web responders and determined the agrivating circular nature of the adobe's direction. Why is this so hard and why is ADOBE so unhelpful. This should be so easy. Why agrivate customers and owners of these products ?
ADOBE, please just provide the contact infomration in your resposne to resolve the issue. Please do not direct me into the infernal loop.
Thanks

OK today, five days after this post;
Lot's of perseverance which included some pretty frustrating wait times and disconnects on the 1800 833-6687 support number over the last couple of days. Today I finally got to speak with an Indian Tech gentleman. He spent 20 minutes on the line with me and was able to reset my activation for both my ADOBE products (PSE 9 and ACROBAT Pro 9). Fantastic help and so cordial and respectful.
Thanks ADOBE. You could make this easier for customers and I filled out my tech experience feedback survey to let you know that. But your Tech was great !
CASE CLOSED !

Where can I buy a larger hard drive for my late 2008, 15" macbook pro? From reviewing questions and answers on the support community it would appear that having Apple remove the old and install the new hard drive is recommended. But how/where?

Where can I buy a larger hard drive for my late 2008, 15" macbook pro? From reviewing questions and answers on the support community it would appear that having Apple remove the old and install the new hard drive is recommended. But how/where?

Welcome to Apple Support Communities
You can install the new hard disk yourself if you want to. You just need a 2'5" SATA II hard drive, which is compatible with your MacBook Pro. You can buy one at OWC > http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/ You can filter hard drives by computer, so press a "Click to view all...", choose your computer in the sidebar and it will give you the compatible hard drives.
There are different brands for the MacBook Pro. The most recommended are HGST and Seagate, which have good reputation. A 7200 rpm hard drive will give you extra performance

Windows XP Pro doesn't recognize new hard drive on T61 thnkpad

Hard drive: 160GB 7200 RPM SATA
                    The Lenovo part number for the new hard drive on my invoice is: 41N5737
                    However, the sticker on the hard drive itself has this Lenovo part number: 42T1057
                    It is made by Hitachi.
Thinkpad: T61 (8891-CTO)
OS: Windows XP Pro SP2 (newly purchased, shrink-wrapped)
This thinkpad had Vista Home on it. I bought the new hard drive for the purpose of loading a just-purchased copy of Windows XP Pro SP2 on it (. After installing the new hard drive:
1. I turned on the machne and inserted the Windows XP CD.
2. Files from the CD (drivers, etc.) started being loaded (into memory, I guess).
3. Then got a prompt to select whether I'd like to install a new version of XP or restore an existing version.
4. I selected Install a new version.
5. Then I got a message saying Windows could not find a hard drive on my machine.
6. Then I restarted, and interrupted the restart to look at the BIOS config settings
7. I found the hard drive test function, and started the hard drive test.
8. It took a while, but the hard drive test was successful. So hard drive is OK, and the BIOS is aware of it.
How can I make Windows XP aware of my new hard drive?
Thanks for any help....
Solved!
Go to Solution.

Tdc3, welcome to the forum,
change the BIOS settings in Config > SATA to Compatibility Mode from AHCI.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you plea

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?

You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X. You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

TS1591 I have an iPod Nano generation six, and since I had a new hard drive installed in my Macbook Pro, iTunes does not recognize it. I have followed all the troubleshooting tips, many times, and nothing works. My other devices are recognized.

I have an iPod Nano generation six, and since I had to get a new hard drive on my Macbook pro, the nano no longer registers in iTunes. My other devices show up fine. I have followed all the trouble shooting advice,and nothing works.

This is the ipod touch forum

My hard drive crashed on my MacBook Pro crashed and I need to get my CS5 up and running on the new hard drive. I copied what I could onto an external hard drive but when I drag and drop I get directions to uninstall but the uninstall folder I have does sa

my hard drive crashed on my MacBook Pro crashed and I need to get my CS5 up and running on the new hard drive. I copied what I could onto an external hard drive but when I drag and drop I get directions to uninstall but the uninstall folder I have does says it is an alias that is no longer present. I get error 6. I would like to get my software up and running on the laptop again please

If you subscribed to iTunes match the songs are kept in icloud. If you didn't but you did save the actual iTunes library folder which should include the music, video, etc. you should be able to just drag this file back to your machine in the same place and when you open iTunes it will give you a chance to identify the iTunes library folder.
You can test this to find out if you saved the media files or not and don't need to attach your nano to do it.
You are correct that once you connect the nano it will clear the existing files from it and sync it with the new iTunes library.
If you don't have the media files i'm not sure if/how to get them back on a windows ipod. I have everything backed up regularly because of the horror stories I have seen & heard.

Re-Register Quicktime Pro on New hard drive???

Similar Messages

Maybe you are looking for