RE-REGISTERING A 7290

Hi - I have bought a second hand 'unlocked' blackberry (cheap-skate, i know..) and was trying to regrister it with my phone company (T-Mobile..) aftering entering the pin and imei - i was informed the device was already registered with another provider. Does anyone know is this information is held by blackberry or is it all which the mobile company, in which case do i literally have to ring around each one until i find the original one and de-register?
Thanks, Lloyd

you either call the original owner and call the service provider, if its TMO they can release it from old BIS account and set you up with new or you can call TMO and they will pass you on to RIM and they will release your PIN and you can set up new BIS account with TMO bis site.
Click on KUDOS to appreciate our efforts and mark the thread RESOLVED if your issue is resolved.

Similar Messages

7290 registration problem

I bought my 7290 - Unlocked GSM from ebay, then I put my SIM Card with BIS-enabled.
When the phone finished loading, the gprs remain small. It should change to GPRS, but it is not.
I tried to register to blackberry network thru HRT, no change.
What happend to my device? Is it suspended? Since I tried to put my SIM Card on 8700, works fine.
The BIS service no problem at all. but when I put it on my 7290, it failed.
Any suggestion would be really appreciate .....

Do you have the PIN of the 7290 registered with your carrier?
Once you do that, you should be ok.
Call your carrier and put the PIN on your BIS account, or do it yourself at your carrier BIS login site:
http://www.blackberryfaq.com/index.php/Where_can_I_log_into_my_BIS_account%3F
Look at the "Change device" link.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

KABA connection issue - program not registered

I am trying to troubleshoot a connection error between SAP and KABA. I have the RFC created in SAP and when I test the connection I get a program not registered. The KABA "amsproc" service on the KABA side has been restarted, we have occasionally received a password locked message in the SAP system log after restarting the KABA service (I believe this means SAP and KABA are communicating). We have since reset the password, but we can not successfully test the RFC and when attempting to send IDOC's out we get the program not registered error. Is there something on the SAP side that needs to be done to register the program or is starting the service on the KABA side going to register the program with SAP? Any assistance would be appreciated.

Hi,
In Central Management Console ie, Admin application of BOE, you need to configure the BW system. Use the below URL,
http://<serverhostname>:<port>/CmcApp
After logging in Select the Authentication and SAP as authentication type. Regarding how to configure, follow the configuration steps mentioned in the below article:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a00ee3b2-5283-2b10-f1bf-8c6413e0898f
Once you import the roles with the above configuration, the user with which you are validating the RFC connection will be imported in the BOE.
Now, verify the RFC in the BW system.
Regards,
Noor.

Register the partner application through SSO Administer Partner Application

When should I use the "Administer Partner Applications" link on the SSO Server Administration page to register the application among the following cases?
1. sign-on SDK integrated application
2. mod_osso integrated application

Were you able to resolve the issue???
Can you pls try Rerunning ssodatan/x with the correct data. The ssodatan script is located in the directory ORACLE_HOME/portal30/admin/plsql/ssodatan.
Refer following link for more info on SSODATAN , SSODATAX and DIAGNOSTICS scripts in Portal 3.0.x:
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=136138.1

Apex application registered with sso as partner application

We have 1 apex app registered with sso and working properly.
I just registered a new apex application with sso. when i authenticate through sso, it directs me to the originally registered application.
I went in through the portal administrator app and verified my settings all pointed to the new application. I verified that my dad is set up correctly.
Any ideas?
APEX 2.0

i did register and obtain the keys through portal admin.
to ensure i used the proper keys (i guess there is a possibility i used the keys from db1 registration) i re-ran regapp with the right keys but recieved the following output:
SQL> @regapp
Partner Application Configuration
Enter value for listener_token: HTML_DB:050iasphttp.xxx.na.xxx.com:7777
Enter value for site_id: EFBE3E14
Enter value for site_token: MSMXURH1EFBE3E14
Enter value for login_url: https://050iaspdb.xxx.na.xxx.com:4443/pls/orasso/orasso.wwsso_app_admin.ls_login
Enter value for encryption_key: 2EBDD126A3A40606
Enter value for ip_check: N
ERROR: Error in registration. Please try again
User-Defined Exception
Registration successful.
Listener token: HTML_DB:050iasphttp.xxx.na.xxx.com:7777
Site id : EFBE3E14
Site token : MSMXURH1EFBE3E14
Encryption key: 2EBDD126A3A40606
Login URL :
https://050iaspdb.xxx.na.xxx.com:4443/pls/orasso/orasso.wwsso_app_admi
n.ls_login
Logout URL :
https://050iaspdb.xxx.na.xxx.com:4443/pls/orasso/orasso.wwsso_app_admi
n.ls_logout
IP check : N
PL/SQL procedure successfully completed.
Commit complete.
No errors.
SQL>
...in spite of the error, i aske the app developer to try and use sso for db2. he now recieves:
User-Defined Exception
Error Error in wwv_flow_custom_auth_sso.process_success:l_sso_user_name:l_sess_id:: Please contact administrator.
OK
any ideas?

I have downloaded Instagram through iTunes, but have no way to register. When I login, it doesn't recognize me.

Please help me to use Instagram. I downloaded it through iTunes, but am unable to Login. Somewhere I missed the opportunity to register. I'm too old to know these things.

Copy the ENTIRE iTunes folder from the old computer to the new computer.

I am trying to use eprint and when I login it says my email address isnt registered

i am trying to use eprint, it says login, login says I am not registered, so I use create function, it says my email address in already in use, so I try retrieving password, then it says email address doesnt exist. so I can not use eprint.

Hi,
I would guess this is an AIM valid Screen Name such as an Apple issued @mac.com account.
I would also guess you travel to other countries.
There have been several posts about @mac.com names and people who travel and use their Screen Name elsewhere having the name Suspended.
Can you Log in here https://settings.aim.com/ ?
Is this where you saw the Suspended message ?
For AIM issued name the answer is to change your Password as this tends to prove you own the account.
This does not work for Apple IDs used as AIM Valid Screen Names as AIM can't tell when the password is changed (They can only see it when you log in)
AIM's Suspended Account page has an email ([email protected]) on it to contact if your account remains Suspended.
However you need to be very clear that you have an Apple Issued Name and that you know that resetting the password that works for AIM Names and that you would like them to reset the account.
More recently this has been a sticking point. It seems the Contact you get does not always know about the agreement that AIM recognises Apple Issued IDs as Valid Screen Names and that the AIM servers can only view the passwords at specific times (or at least confirm them) so you changing it will make no difference and that they have to step in manually.
10:39 PM Saturday; October 20, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

J1IG Excise invoice is not capturing in RG23D Register

Dear Experts,
while making GR for the materiel,Excise tab is updating in MIGO header level.but user select no excise entry here.while
excise capturing with J1IG,its not updating RG23D Register.a internalnumber is generating while capturing J1Ig,but its not
updating in RG23D Register,please sugest me,we are mainating J1ID and Excise data in vendor master.please suggest what might be wrong?
Regards,
Varun

Hi,
In SPRO-Log Gen- Tx on goods movement- India-Business Transactions-Incoming Invoice- Specify which movements involves excise invoice.
Assign 101- No excise entry(Also 105 if you are using 103,105)
Now in J1ID, material & chapter ID combination- maintain it as a 'N-Noncenvatable'.
Regards,
Piyush

How to register the recipient when create job by function

I am now use JOB_OPEN , JOB_SUBMIT and JOB_CLOSE to create a job in the program. And need to post the result of the report to the person by email.
Can you tell me how to register the recipient when create the job.
( in sm36, it is easily to do but how to do in coding? )
regards,
slam

Hi
I think in Back ground using the above fun modules you can't send a mail to the receipient.
see the use of the above fun modules;
IF p_bjob = 'X'.
    CONCATENATE sy-cprog sy-datum sy-uzeit
                INTO jobname SEPARATED BY '_'.
    CALL FUNCTION 'JOB_OPEN'
      EXPORTING
        jobname          = jobname
      IMPORTING
        jobcount         = jobcount
      EXCEPTIONS
        cant_create_job = 1
        invalid_job_data = 2
        jobname_missing = 3
        OTHERS           = 4.
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
      IMPORTING
        out_archive_parameters = arc_params
        out_parameters         = print_params
        valid                  = valid
      EXCEPTIONS
        archive_info_not_found = 1
        invalid_print_params   = 2
        invalid_archive_params = 3
        OTHERS                 = 4.
    IF valid = chk.
      SUBMIT ybrep
                      WITH < sel Screen>
                      AND RETURN
                      USER               sy-uname
                      VIA JOB            jobname
                      NUMBER             jobcount
                      TO SAP-SPOOL
                      SPOOL PARAMETERS   print_params
                      ARCHIVE PARAMETERS arc_params
                      WITHOUT SPOOL DYNPRO.
      CALL FUNCTION 'JOB_CLOSE'
        EXPORTING
          jobcount             = jobcount
          jobname              = jobname
          strtimmed            = 'X'
        EXCEPTIONS
          cant_start_immediate = 1
          invalid_startdate    = 2
          jobname_missing      = 3
          job_close_failed     = 4
          job_nosteps          = 5
          job_notex            = 6
          lock_failed          = 7
          invalid_target       = 8
          OTHERS               = 9.
      IF sy-subrc <> 0.
       MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
               WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ELSE.
        MESSAGE i029 WITH jobname.
      ENDIF.
    ELSE.
      MESSAGE s000 WITH text-003.
      STOP.
    ENDIF.
ENDIF.
Reward points if useful
Regards
Anji

How can I renew /upgrade in a country different to one where my account originally registered?

Thank you for advice on how to resolve this.
I registered and originally bought my product in Ireland. I now live in Netherlands, am trying to renew/upgrade my Adobe products, and at checkout keeps telling me - in dutch that I can't complete my purchase, as my account associated in another country and to register an account in this country.
When I try to register an account in NL, it says my email address already associated with an adobe account!!
Catch 22?
Please advise what I need to do.
Thank you.

Hi Michael ,
You can log in to Adobe.com with your credentials and you can change your region or country from the option "Change Region" at the bottom left of the page .
From there you can change your region and select the preferred one and make the payments.
Hope this will work .
Regards
Sukrit Dhingra

I'm having trouble downloading an update to my MacBook Pro. It comes up with my husband's name even though the MacBook is registered under my name and I have my own ITunes acct. how do I get his name off the ITunes update on my Mac

I'm trying to download an automatic update from ITunes but when I click on "Update" it comes up with the message, "You have updates available for other accounts" an tells me to sign in to my husband's account, even though the MacBook is registered in my name and I have my own ITunes account. My husband has his own MacBook and ITunes acct. How do I fix?

Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID.
Apple ID FAQs
http://support.apple.com/kb/HE37

Registering multiple iPods on same computer

I currently have a 4G 2nd generation iPod that is registered to our computer. My husband just received a 4th generation iPod. Can you register multiple iPods onto the same computer?
My other question is if you purchase a used iPod, how do you register that and is there anything else we should consider when looking at purchasing a used iPod?
Thanks for any help.

Can you register multiple iPods onto the same computer?
Yes. Register each iPod as if it was the only iPod being used on that computer.
My other question is if you purchase a used iPod, how do you register that
If iTunes doesn't give you the option of registering it, click here and fill out the forms.
and is there anything else we should consider when looking at purchasing a used iPod?
Restore it when you connect it to the computer.
(37330)

How to register multiple ipods on same email account

how do register multiple ipods using the same email account?

Maybe here
How to use multiple iPods, iPads, or iPhones with one computer
You can have an unlimited number of devices that you own or control for private use tied to one iTunes account. But you have only have five tied to one iCloud account.
To alllow FT and Messagibng between them see:
MacMost Now 653: Setting Up Multiple iOS Devices For Messages and FaceTime

How many devices can you register with a personal dev account

can anyone tell me how many udids can i register with a personal account as i have a team of testers i would like to add , would i need a company dev account for this thanks or will my personal one be ok for this

Still the same. Maximum 100 per year for testing. Individual Developer Account, person or company.
Enterprise Account is for distribution to employees, not via the App Store.

"Error while registering the Java 2 Runtime Environment registry keys"

"Error while registering the Java 2 Runtime Environment registry keys"
I am getting the above error when trying to install the 1.3 JRE (installed with the 1.3 plug in which I need). As part of my development I have been installing and uninstalling the JRE multiple times. Then, I got the above error when trying to install it, and now it appears to be installed but I cannot uninstall it. When I try to uninstall it, it just remains, and when I try to install it again I get the above error. I have tried cleaning up all javasoft registry entries, but it doesnt seem to have helped. Can anyone help me either completely uninstall the JRE so I can do a clean install or help me get rid of the error above when I install. Is there some registry entries I should be looking at? Anything else? this is quite urgent as I need to test my applet with the plugin installed and not installed - and I currently cant uninstall it. Any ideas?
Thanks for your help
Aaron

I am getting this same error message when trying to upgrade from 1.3.1_03 to 1.3.1_19.
I have multiple versions of jre's and jdks on my machine.
Anyone else seen this problem or know how to resolve it.

RE-REGISTERING A 7290

Similar Messages

Maybe you are looking for