Re-Release of PO in case of any changes

All SAP Gurus,
We have a release strategy for PO.
Our requirment is 'if we do any changes in the released PO (may it be the text or any thing)' the released PO should go for re-release.
How it can be done?
Regards,

Hello Rajan,
If you want to have control based on change in any value release st. should re trigger you will have to go for some enhancement, but for any Value change release st will re trigger if you use the changeability (which determines how a Purchase document react to change in value) as 4 set under release indicators set in the release strategy design. this will solve your problem.
Also release strategy is determined based upon the Characteristic Values maintained under classification data for release strategy.
So in this case if you want to have a design like new rel st should trigger for any changes done to PR/PO then you should ask for some enhancement, but other way control, based upon change in value can be done by solution mentioned above.
regards,
Prashant Rathore.

Similar Messages

  • Release Strategy to be reset for any change in purchase order

    Hi Experts,
    At present the release strategy configured is for any change in the value of the purchase order, the release strategy is reset. Now the the client wants that for even any text change of a word, text, quantity, value, addition, deletion the release strategy should be reset.
    Can any one guide to configure the release strategy for any change. Also please provide the list of standard parameters/scenario (E.g. change of price, change of quantity etc) for which the release strategy can be configured to be reset.
    Thanks in advance.
    AJ

    Hi Diwakar,
    I too have the same problem. I tried with Changeable indicator "1". The system does not allow to make any change to the Purchase Order even after the first level of Release. But the requirement is that the system should Reset the Release Strategy for even minor Change in the PO.
    Regards,
    S.Raghavan

  • Re-trigger PO release on any change in PO

    hi,
    I have set a release strategy for PO.
    Now, the requirement is to re-trigger the release in case of any change in PO.  I searched the forum and found a reply regarding setting the release indicator accordingly i.e. to 3.
    But, my question here is can we set only 2 release indicators i.e. one when PO is not released and another when PO is released --> can't we have more than 2 release indicators ??
    Secondly, i also tried changing the release indicator - changeable code to 3 but still on changing the PO value - release is not re-triggred.
    Do i need to do any other setting or what is right process for this.
    Awaiting the reply.
    Thanks to all in advance.
    Regards,
    Laxmi

    Hi,
    Go for  changeable indicator 6 in release indicator
    OR
    Go for User exit EXIT_SAPLEBND_002 or check to modify function module ME_REL_STRATEGIE_EKKO for to reset existing release strategy for reduced quantity and/or values.
    Regards,
    Biju K

  • Release strategy retrigger for all non significant changes

    HI,
    My client has the below requirement:
    The Purchase requsitions and Purchase orders are released by different approval authorities. Any change made to any field like material short text, cost centre, payment terms, material long text, etc. the sytem has to cancel all the previous releases and release strategy need to be retriggred from the beginning.
    I request all to provide me with an user exit or badi if any available in the system to achieve this.
    Regards,
    Rayeesuddin

    Dear Ray,
    First discuss this with your functional consultant (MM) from functional point is there is any setting.
    Regards,
    D.Srinivas.

  • I have a domain with 2 DCs (both virtual machines) in different Hyper-V Hosts. Dose this case make any influence on the time sync?

    As title,
    I have a domain with 2 DCs (both virtual machines) in 2 different Hyper-V Hosts, and one of the perform as a PDC Emulator.
    Dose this case make any influence on the time sync?
    i.e. Both of the VMs sync with Hyper-V host, instead the other host should sync with the PDC Emulator?
    I run w32tm command and get the following result:
    C:\Users\Administrator.DOMAIN8>w32tm /query /computer:dc8.domain8.local /source
    VM IC Time Synchronization Provider
    C:\Users\Administrator.DOMAIN8>w32tm /query /computer:hpvzh05.domain8.local /source
    VM IC Time Synchronization Provider
    HPVZH05.domain8.local works as PDC server.
    How can I make DC8 sync with HPVZH05?

    Awesome!
    It looks like your PDC is successfully pulling time from an external source.  DC8 is not longer pulling from Hyper-V so that is good.
    When you set a client to pull from a source ( and in this case DC8 is pulling from NT5DS, which tells it to pull from the PDC), and it CAN'T pull from that source, it will default to Local CMOS Clock.  This is likely an easy fix.
    First, check connectivity:
    - Method one- Download Portqry and run this command: portqry -n HPVZH05 -p both -e 123 and see if the results say listening, or
    - Method two- Run this command from DC8: w32tm /stripchart /computer:HPVZH05
    If you get any kind of error using method two, it's a connectivity issue.  (Maybe you have a firewall that's blocking access?)
    The other cause of this, and probably more likely in your case, is that your PDC isn't properly advertising as a reliable time source, so DC8 isn't 'allowed' to pull from it.
    Try running this command on your PDC: w32tm /config /reliable:yes
    Then go restart time on your PDC, THEN DC8 again.  (net stop w32time & net start w32time)
    Here's an article you can reference: http://technet.microsoft.com/en-us/library/cc794937(v=WS.10).aspx
    - As always, if you find my posts to be helpful, please mark it appropriately.  Thank you :)
    Chris Ream

  • I have had to replace a faulty hard-drive on my imac. Some applications (incl iphoto) are telling me that my OSX (10.82?) isnt recent enough to use the application. I need 10.9. I have upgraded to Maverick but this remains the case. Any help?

    I have had to replace a faulty hard-drive on my imac. Some applications (incl iphoto) are telling me that my OSX (10.82?) isnt recent enough to use the application. I need 10.9. I have upgraded to Maverick but this remains the case. Any help?

    If your Mac is from the age of Mac OS X 10.8.2:
    How to find your Mac's model and age?
    Contact AppleCare to request the prebundled iPhoto be uploaded to the Mac App Store, or the Mac App Store support.
    This is just a user to user forum.  This link goes direct to the Apple Store support:
    http://www.apple.com/support/mac/app-store/contact.html?form=account&topic=MacAp pStoreAccountandBilling

  • Reset Release Strategy for any change in the Purchase Order

    Hi,
    Is it possible in SAP standards to reset release strategy for even minor changes in the Purchase Order irrespective of whether it is value change or any change in the text or Purchasing group change or whatever it is?
    If so, where do we need to make the configurations.
    I have seen in some thread about resetting the release strategy for decrease in Purchase Order value.Even that was possible through some BAPI.
    Thanks in Advance.
    S.Raghavan

    hi sandesh,
    sorry, i know it's too late.
    i tried your suggestion, it works blocking the purchase order after release strategies are setted.
    sandesh, raghavan:
    i need to reset the strategies after to make any change in the po. i'll appreciate your help if you can give it.
    regards
    f

  • I need to be able to print or export some photos from iPhoto with the date the photos were taken.  Need this for a legal case.  Any suggestions?

    I need to be able to print or export some photos from iPhoto with the date the photos were taken.  Need this for a legal case.  Any suggestions?

    The date they were taken us in the EXIF data and is included in the export
    However it is trivial to modify it so I doubt that it would hold water in court
    LN

  • IPad: Launch YouTube, click Add a comment. Google sign-in box cannot be dismissed by pressing the X. This was not the case in any of the four iPads in earlier OS versions. Only occasionally it is possible to press the X and close the sign-in box.

    iPad: Launch YouTube, click Add a comment. Google sign-in box cannot be dismissed by pressing the X.
    This was not the case in any of the four iPads in earlier OS versions. Only occasionally it is possible to press the X and close the sign-in box.

    if this is the first time to happen in this version of the app. then it may just be a flaw with that version, if you have already un-installed and re-installed the app then it will just be a waiting game at this point until youtube hears and it and fixes it

  • PR Old Release Strategy - triggering NEW Release strategy any change OLD PR

    Dear Gurus,
    We have implement item level PR release strategy,
    characteristic used:  1. Document type, 2. PR item Value, 3. Material Group, 4. Change date & 5. Account Assignment Category.
    BEfore the above implementation, there is a OLD PR release Strategy existing in the system at one level release.
    Now the issue, the OLD release Strategy status is release completed, now the user goes and change the PURCHASING GROUP in old PR, new release gets triggered. How to Stop this, system should not trigger NEW STRATEGY,
    Please advice
    REgards
    RS

    HI,
    If i use date created as a characteristic, then Old release strategy get reset and the no release strategy will be trigger henceforth, the status of the PR will be INACTIVE.
    ANy charateristic we use, there will be only 2 options for old released PRs, 1) It will reset the strategy to new one or 2) the old strategy will be reset and make the PR status as INACTIVE.
    Is this is standard behaviour? pleae advice
    Regards
    RS

  • Any changes to BI for procument and Inventory in Delta Fun & release notes

    Hello Guru's
    Are they any changes to BI for Procurement and Inventory, in the DELTA Functionality and release notes.  Will anyone reply me any link that will be of great help.
    Full points to the link / oss

    Hi,
    See
    Treatment of historical full loads with Inventory cube
    Setting up material movement/inventory with limit locking time
    The steps in BI 7.
    In R3
    0. Delete previous data: TC lbwg, application 03.
    1. Delete Queue in LBWQ/SMQ1 related to 03.
    2. Lock the system, don't allow any transactions from Users.
    3. Stock initialization: TC MCNB, structure 2lis_03_bx. (Here Select All Stocks(Including Non-Valuated)).
    4. Statistical setup of mat movements: TC OLI1BW or sbiw path
    5. Statistical setup of mat movements: TC OLIZBW or sbiw path for 2LIS_03_UM load.
    In BI
    0. Load initial stock: datasource 2lis_03_bx using InfoPackage and then Run DTP with the following options.
        In DTP: Extraction Tab--->Extraction Mode = Initial Non-Cumulative for Non-Cumulative..select this and then Execute.
    1. Cube>Manage>Collaps-->Don't select "No Marker Updating indicator" and then compress.
    2. Load 2LIS_03_BF and 2LIS_03_UM Initial runs using InfoPackages and then Cube>Manage>Collaps-->Select "No Marker Updating indicator" and then compress.
    Now check the data with MB5B In ECC and recon data with Report on 0IC_C03 Cube.
    Thanks
    Reddy

  • Will apple be releasing a bumper type case for the iPhone 5, like the one that was available for the iPhone 4?

    Will apple be releasing a bumper type case for the iPhone 5, like the one that was available for the iPhone 4?

    Sorry, but we are not Apple so we don't know what Apple will do.

  • Capitalization doesn't work as described. One can start with lower case and change to upper, but changing from upper case to any of the other options doesn't work. Is there a way around this or is this just a glitch that needs fixing?

    In Pages capitalization doesn't work as described. One can start with lower case and change to upper, but changing from upper case to any of the other options doesn't work. Is there a way around this or is this just a glitch that needs fixing?

    I think it does work as described, but the description is not very complete. Capitalization does not change any of the characters that you type; what it does is allow some of the lower case characters to display as capitals. If you copy the result and paste it as plain text, you'll see that the lower case characters are still there. It doesn't actually say anywhere that it can make capitals display as lower case, and it can't.
    The obvious way around this is to actually type what you want.
    The more powerful way is to install WordService from Devon Technologies which adds the functionality of Pages' capitalization menu as well a lot of other ones. WordService actually changes the character to the one displayed, and it works in most of the applications on your Mac.

  • Disallow any change in material through CJ20N IF PR is release and PO Exist

    Requirement is as follows.
    1. No change in PR material through CJ20N if related PR status is released.
    2. No change in PR material through CJ20N if related PO is exist for the same.
    3. Not allow to add new material through CJ20N if PR status is released.
    4. Not allow to add new material through CJ20N if PO is existing against any of the line item even if PR
        is unreleased.
    5. Not allow to delete the material through CJ20N if PR status is released
    6. Not allow to delete the material through CJ20N if PR is unreleased and against all line items deletion
        indicator is not present in PO
    to resolve this i tried enhancement is COZF0002 - Change purchase req. for externally procured component but behavior of this exit is not consistant.
    anyone have full proof solution for this ?

    Sorry for late update.
    enhancement CNEX0009 given by you is not getting triggerd.
    we tried enhancement COZF0002, but in this i am facing 1 problem
    When adding new network system seting NTUP status to WBS. And when WBS is having NTUP status system is not allowing to make any change.
    eg. IN WBS 1 alredy 5 PR created having PR release status. And WBS having NTUP status.
    when adding new network in this WBS, system is checking with old PR,  while saving against them if REL status is there exiting the transction w/o saving. As per the condition set for checking PR release status.
    for that we tried to schedule WBS internaly through the same exit, but when ading new network while saving it is scheduling as per the written code but exiting the transtion checking with opd PR.
    But NTUP is getting removed without saving the data. After that i have to add again the same data and at this time it is saving as WBS status is not NTUP.
    how to overcome this problem please suggest.

  • Release PO after any change in PO

    Dear Experts,
                         I have change the standard PO workflow WS20000075 to 3 levels and only using the RELEASESTEPCREATED. when user reject the PO in any level, "OTHER THAN 1st LEVEL" it reset the release strategy using BAPI_PO_RESET_RELEASE; after that PO becomes ready for approval again, as required.
    My problem is that, when the 1st approver rejects the PO, it should be ready again for approvals after user do any change in the PO. Can I achieve this using RELEASESTEPCREATED event only.
    Regards,
    Sohail

    Thank you very much Rick,
                                              Yes I am getting duplicate events as well. I am using standard workflow WS20000075. But you can see in SWEC entries that my workflow has single entries for both releasestepcreated and changed. And It may be also seen in SWE2 entries my workflow WS20000075 has one entry each for changed and
    releasestepcreated. Is there need to remove any entry from these (highlighted) or not. SWEL also have multiple entries for releasestepcreated and changed event as well for workflow WS20000075 Please suggest me in this regards.
    -- SWEL --
    -- SWEC --
    -- SWE2 --
    Waiting for kind replies,
    Regards,
    Sohail

Maybe you are looking for