Re: removing deletion flag

Hi guru's.
The material is flag for deletion at client level, but unfortunately its stock is not removed,in one plant now this stock is to be removed from that plant & then marked for deletion, what to do.
its urgent
thanks
tuljasingh.

I am currently a student at RSU learning SAP and in trying to delete a material that had incorrect data I tried flagging the item for immediate deletion. Well I found out how to fix the standard price and when I went on to create the bill of materials is wouldn't let me because the material was flagged for deletion. After searching for this issue and solution I was able to remove the flag and finish the assignment. Thank you for having this trouble shooting information available to us.
Marcus

Similar Messages

  • Remove Deletion flag on storage location

    Dear all,
    Kindly find below image
    i want to remove the  deletion flag on storage location and plant.
    Kindly let me know how to process it
    Regards
    Rajasekaran

    Hi Raja,
    Just un-tick at plant level and press enter. Storage Location tick will be cleared automatically. Then SAVE. And later if you want to maintain only for storage location, then enter material/plant/storage location in intial screen of MM06 and tick only storage location
    Thanks & Regards,
    Ramagiri

  • Remove deletion flag

    Hi Gurus,
    How to remove the deletion flag for the material master?
    Regards,
    Narendra

    Hi,
    Follow path Production- Master Data- Material Master- Flag for Deletion- Immediately MM06.
    Give input for the material & execute.
    Remove the deletion flag & save.
    SmanS

  • Remove Deletion Flag from WBS Element

    Hi,
    Can anyone please tell me how cancel deletion flag from a WBS Element ? I set Deletion Flag on WBS Element by fault.
    BR//
    Rofique
    Edited by: akash2010 on Feb 18, 2011 6:57 AM
    Edited by: Virendra Pal on Feb 18, 2011 2:59 PM
    Basic Question

    The same way as you set it.
    Select the WBS Edit>Status>DeletionFlag-->Undo

  • Remove PO deletion flag

    hi...
    i deleted some PO by Mass Transaction...by mistake some processing PO is also deleted...how i can remove the delete flag...???
    Thanks & Regards
    Rekha Sharma

    hi all,
    to remove deletion flag from your PO you can use both the transactions ME22N and and MEMASSPO.
    choose the line items that you want to undelete and press the undelete button.
    NOTE-PO at line items will be successfully deleted if only-No MIGO and MIRO has been done.
    OR both MIGO and MIRO has been done.
    If only MIGO has been done No MIRO at that moment You will not be able to undelete the PO.In this case you will obtain a error message shown below.
    "Quantity delivered differs from qty ordered(Function not possible)".

  • SET DELETION FLAG FOR ORDER

    Dear friends,
    once maintenance order has been released,I am unable to put deletation flag for that order.
    is there any option to put deletion flag after releasing maint order other than locking
    your response is highly appriciated.
    Regards,
    K.Sunil

    Hi Sunil,
                It can allow you to delet, might be an Authorization Issue
    for your Maintenence Order Creation Role, Just check for the Object:  I_VORG_ORD
    Field: BETRVORG
    Field Value: LVMS  Mark for deletion
                        LVMZ  Remove deletion flag
    Hope it helps you.
    Regards,
    Yawar Khan

  • Removal of customer master master deletion flag.

    Hi gurus,
    My client set deletion flags for some customer and now they want those customer to be active.  Is it possible to remove the deletion flag? can anyone help?  quick response is highly appreciated.
    thanks & regards,
    anand

    Hi,
    By using the T.Code "XD06",you can unmark the deletion flags for your customers.
    Goto the T.Code "XD06".
    Enter the customer number.
    Enter the Company code and Sales area.
    Enter.
    Uncheck the tick boxes.
    Save.
    Regards,
    Krishna.

  • Customer Deletion flag

    Hi Gurus,
    How to delete multiple customers (its not specified from 1 to 10 like, its like customer no: 2, 4,8,10,13,17,89,99,110 like)in one go, In XD06 we can enter only one customer number. I tried T. Code: MASS also, but could not find the solution.
    please help me ASAP.
    Thanks in advance.
    Regards,
    Vamsi P.

    Hi Vamsi,
    The CATT is primarly a testing tool and can also be used for mass upload of data. The CATT works as if an user is updating the values one by one.
    The procedure to upload the data using CATT is done in four steps
    a) Creating the CATT Test Case & Recording the sample data input
    b) Download of source data file
    c) Modify the source data file
    d) Upload the data from source file
    I have explained the procedure step by step and do note the following explanation is specific to your problem
    Creation of CATT Test Case:
    1)Go to TCODE [SCAT]
    2)Create a Test Case by entering a name and clicking the TCD button in application tool bar
    3)Enter the TCODE you want to execute [XD06]
    4)Enter the customer number, company code and sales area data.
    5) Select the required deletion flag and/or deletion blocks
    6)Click on Save
    7)End Recording
    8)Click on Save and save as local object
    9)Press Exit button and save changes while exiting.
    Now we have created a recording for deleting a customer with a sample data.
    Ensure while recording the transaction you do not get an warning or error messages else you might have to redo the recordng.
    Download of source data file
    1)In the [SCAT] screen select your test case and click on change
    2)Click on choose button in the application tool bar
    3)Click on field list in the application tool bar
    4)Double click on the customer number and change the parameter name as &CUSTNO. Any field starting with & would be treated as an input field from a file. If you have to execute the customer deletion across multiple Sales Area you need to do the same for the Sales Area fields too
    5)Remove the default value
    6)Press Exit and save the test case
    7)In the SCAT screen select your test case and in the menu bar Goto -> Variant -> Export Default
    8)You would get a text file.
    Now you have downloaded a source data file
    Modify the source data file
    1)Open the text file in Excel and load the remaining data
    2)Remove the fourth line which starts with three asterisks
    3)Below the customer number heading (&CUSTNO) load all the customers for which the deletion flag has to be set
    4)Save the file as Text Delimiter
    Now the data to be uploaded as been prepared.
    Upload the data from source file
    1)Go to [SCAT], select the test case and press F8
    2)Select the processing mode as background
    3)Chose variant as external from file
    4)Click on choose and select the path of the text file
    5)Press F8 for the remaing records to be updated
    After execution press Enter to see the log. Any line highlighted in Red is an Error for which you need to do further analysis to find out the error reason.
    Hope this helps.
    Regards
    Nadarajah Pratheb

  • Deletion flags for equipment BOM

    Hi,
    In equipment BOM header , there are 2 fields for deletion flag :
    -one is set manually (the one on the right)
    -the other set by the system (the one on the left).
    Can someone explain to me how deletion flag indicator (on the left) work?
    Thanks,
    P.

    Hi,
    To explain this i must say first there is a difference in the Deletion Flag (Right in Header) and Deletion Indicator(Left in Header).
    In SAP term The deletion Indicator shows the item which has already been Deleted from the System and Deletion flag shows that the record has been flagged for deletion and will hence be Archieve (when, depends on the Archieving strategy followed in the company).
    To explain the affect these will have is the Deletion Indicator will not allow you to use the and will show the error as the object has been deleted and is not in the system.
    Deletion flag for BOMs
    Indicator: this BOM will be archived during the next archiving run and, if necessary, deleted from the data base.
    Where as the Deletion Flag will show that the object is ready to be archieved and is set to be deleted.
    Deletion Indicator
    Indicator showing that the BOM header or the BOM item has been deleted with reference to the change number.
    Now there is another difference in the way we can amke the objects active from deletion flag anf the deletion indicator.
    For Deletion flag you have to go to change mode and just remove or untick the deletion flag.
    For Deletion indicator you have to go to Archieve table and pull the object back in to SAP system and it will then show only the deletion flag, which can be removed by the way explained above.
    I hope this was helpful, if yes then please award points.
    Regards
    Anoop

  • Impact deletion flag set process order

    If i have "Set deletion flag for old process order" after the same any impact in Finance or production side.
    Chintan

    Hi,
    You should set the deletion flag only for orders:
    which are delivered or technically completed
    for which variances have been calculated
    for which you do not anticipate any further follow-up costs
    If follow-up costs must be charged to the object, you can remove the deletion flag (DLFL).  Deletion indicators (DLT), however, cannot be withdrawn.
    As long as the accounting period is not yet closed, data (such as from results analysis) can still be transferred to Financial Accounting (FI). The FI period should be closed before you can set the deletion indicator (DLT), since no more costs can be settled to FI after that point.
    When the orders are deleted, the quantity information on the routing operations is also deleted.
    Regards,
    Antje

  • Deletion flag on process orders - HELP!!

    In order to speed up the CO Closing (WIP, variances, settlement) we want to activate the deletion flag on all the old process orders with the COAC transaction but it says that the ORRQ status is active.
    In order to remove this status we mark in the COR4 the "No process data documentation required"  for every plant and order type.
    We run the transaction COPA to archive the corresponding logs for the corresponding orders but when we mark all the orders that we want to archive the system says " Total Process orders archived: 0"
    How can we mark the deletion flag on all these orders???
    PLease we need to reduce the time of some process urgently.
    Message was edited by: Corrections
            Eugenia Zuniga Perezbolde

    Hi,
    We are facing the same problems here. We tried to complete the inspection lot, but this has no effect on status ORRQ.
    The transaction COPA is not working on it...
    Regards,
    Pérsio

  • Reset the Service entry sheet deletion flag.

    Dear all,
    How to Reset the Deletion flag for the service entry sheet.(To remove the deletion flag)
    Thanks,
    Cherry

    Dear Cherry,
    I am afraid I must confirm that the system is working as designed in
    this case.
    It is not possible to cancel the deletion indicator once it has been
    set in a Service Entry Sheet. None of the two currently available
    transactions to maintain Service Entry Sheets support this functionality
    (this is, the deletion indicator cannot be reset via ML81 or ML81N: None
    of the two transactions allow this).
    We had got the similar issue from the other customers and developers replied that:
        "The service entry sheet is an accounting document, and once you
         delete it, can no be undelete it."
    Best Regards,
    Arminda Jack

  • Purchase contract item deletion flag

    Hi SAP experts.
    By mistake an item line of a purchase contract was flagged for deletion in transaction ME32K, is there a way to remove the flag?
    I hope someone can help me.

    Hi
    Go into Contract in change mode (ME32K)
    Select the line item,
    Edit--> Reset deletion indicator  and SAVE.
    Thanks
    Sasi

  • RPRAPA00 program deletion flag update issue

    Hi,
    I am stuck up with a specific company code whose deletion flag is updated for UPDATE variant(05001UDEMPVEN) when I execute PRAA tcode (or program RPRAPA00 ) and program writes to a file with the following contents:
    2BLFB1                         0002422000/  /         / /LISI03VEXT/   / /       / /       / /         /       V00A/   /  XA         A/              //               // /           /              /                             XX/  /         / / / / //  //
    Marked in red , XX represents "Posting block for company code" and "Deletion Flag for Master Record (Company Code Level)" respectively.
    Please advise from where deletion flag is updated and written to the file.
    NOTE : Flag is not coming from LFB1 as I tried to remove the flag from table but still flags are written to the file.
    Thanks,
    Manzoor.

    Flags are not coming FROM LFA1/LFB1 but are going INTO LFA1/LFB1 from personal Infotypes : from HR Master Record: Infotype 0000 (Actions) to HR Master Record: Infotype 0009 (Bank Details) and reference vendor master record.
    Regards,
    Raymond

  • Filtering records with deletion flag in Query report

    Dear Friends,
    We are using ECC6.00 (EHP4) for one of our QM requirement, i have created a query in SQ01 with the tables QMEL,AUFK,AFKO,QMFE etc., to get the details of production order and notification.
    The report will list out the production scheduler wise, order wise, defect wise quantity with the notification number also in the display.
    For notifications which are created wrongly, the users set deletion flag. The same i.e., notifications with deletion flag should not appear in the report and hence i have called the field and filtered the value in the output (i.e., field value not equal to X where X is for deletion flag set records).
    Everything works fine upto this, but when users (to carry out analysis) send the data to the spread sheet, the filter values are removed and all records are populated in the excel sheet (even records with deletion flag).
    To select and display only records without deletion flag, i want to introduce coding in the query. Kindly tell me whether this is possible, if so where and what code should be written to meet my requirement.
    The records with the deletion flag (notifications) should be eliminated from the selection and display.
    Experts help required.
    Regards,
    M.M

    Dear Raymond Giuseppi,
    Thank you for your reply. The code syntax had been corrected based on your information. Unfortunately the code doesn't filter the records. On further investigation , it was observed that the field KZLOESCH doesn't get updated and hence a field had been created in the infoset wherein the following  coding is written
    clear : w_dlfl.
    data : w_inact type char1.
    select single inact into w_inact from jest
    where objnr = qmel-objnr
       and stat = 'I0076'
       and inact ne 'X'.
    if sy-subrc = 0 .
      w_dlfl = 'X'.
    else.
      w_dlfl = ''.
    endif.
    The field name is W_dlfl.
    In the above condition how and where should i include the code given by you. Since the field KZLOESCH is not updated how should we get the data from the field w_dlfl be exempted from selection?
    Kindly provide solution.
    Regards,
    M.M

Maybe you are looking for