RE resetting problems

i reset my ipod after resetting, i have a picture of the usb to connect to itunes, but nothing happens when i go to itunes, itines does not regognise my ipod?

Try this:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
You also might want to try placing the iPod in recovery mode tsee if iTunes will see it. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
You said you reset your iPod. The following is resetting. Is this what you did? If not what did you do?
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.

Similar Messages

Automatic reset problem (Palm Centro)

Recently, my phone begins to have a new problem.
When I use the phone, it automatically resets if I touch the screen during the conversation.
It disrupt my conversation.
I had done hard reset; but, the problem came up again.
What can I do?

Did the problem immediately return when you finished the Hard Reset, or after doing a HotSync? If the latter, then the problem is software-related and saved on your computer.
Did the phone get damaged in any way? Get wet?
Here's my normal help file for clearing out reset problems:
As with most problems that occur on a Palm phone or PDA, it is either software or hardware related and we have to determine which one.
Best method is to first make a complete backup of your unit to your SD card using the free "NVBackup" (available from http://www.freewarepalm.com) After the backup is complete, Hard Reset the unit, then test to see if full functionality returns.
Perform a Hard Reset as described in this Palm KB article: http://kb.palm.com/wps/portal/kb/common/article/45050_en.html
DO NOT HOTSYNC YET! Test the unit before reinstalling any software. If the unit works correctly, your problem is being caused by a "drug interaction" of software - maybe one rogue program, or a combination of several. You'll have to reinstall the third-party programs one or a few at a time to find the problem one. To avoid re-installing a software issue, rename your /Backup directory in your Palm folder (on a PC it's found here: C/Program Files/Palm(One)/"your HotSync ID name truncated"/Backup) to something like "/BackupOLD". Now perform the HotSync, choose your HotSync name you've been using, and all your PIM data will return, but not the third-party programs. Test for functionality again. If all is good, start installing the old programs from your /BackupOLD directory one (or a few if brave) at a time.
If the unit does not work after a Hard Reset is performed correctly, then it may be Hardware-related. (If it's a connection problem via either BlueTooth or Wifi, be sure nothing has changed on the unit you're trying to connect to!)
Hope this has helped,
Wyrenut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

RE: freezing and resetting problems when syncing a large music library

Hi there,
I got a new ipod classic 160gb for christmas. I updated the firmware to 1.0.3 and synced it for the first time. When I tried to play any music it locked up and went into a loop of resetting itself which I could only break by forcing the ipod into disk mode.
I restored the ipod and tried again syncing the music in chunks. This worked until the ipod was about 50% full then it started to freeze and reset again. I took this ipod back to the store but the new one had the exact same problem!
Through a lot of trial and error I have managed to get the ipod working with only part of my library synced. By syncing music a few albums at a time I have managed to get about 86gb (of 120gb) onto it, but surely this is not how it is supposed to be! I have a dual boot system and have the same problems using windows XP or vista.
I know that I'm not the only person experiencing resetting problems with the ipod classic. Are the users who are experiencing these endless resetting problems with the ipod classic those who have large music libraries (i.e over 80gb)? Can the ipod classic simply not handle the large volumes of music it was designed to hold?
The only features I was looking forward to in the new ipod were a) larger capacity hard drive and b) the ability to organise playlists into folders on the ipod for easier browsing. As it stands I cannot sync my full library and navigating through my playlists is so slow it is hardly worth bothering. I never had a minutes trouble with my 5th gen.
Have I been unlucky and the ipod classics I have recieved have been duds? In which case should I arrange another replacement? Or is this typical of the ipod classic user experience when the user has a large music library and many playlists? Should I await a firmware update that might remedy my problems?
Lastly am I doing something wrong? Any help or workarounds would be gratefully appreciated.

best thing to do is use Playlist and Smart Playliss to fill your iPod. Just so you know, since your post seemed to indicate you thought the playlists have to be tailored to what is already on the iPod, when you sync to playlists, any songs needed for those playlists are automatically moved onto the iPod. And any songs NOT in the playlists get removed.
Patrick

K8NGM2-FID warm reboot/reset problems

Hi everybody:
The system:
MSI K8NGM2-FID Bios V 3.4
RAM - G.SKILL 2GB F1-3200PHU2
Processor Athlon X2 3800+
Drive WD2500YD 250GB 7200 RPM SATA150
DVD R/W Pioneer DVR-111D
DVD-R ASUS DVD-E616AG
Case Antec Sonata II w/ Antec 450 W PSU 3.3 V/32A 12V1/15A 12V2/17A
OS WinXP SP2 w/auto update set
The Problem:
When the system runs for more than 1-2 minutes and I do a restart under Windows OR hit the reset button it hangs with the HDD light on steady and no video output.
If I try a warm restart or reset button push immediately (10-30 seconds) after windows comes up the system restarts OK.
When the system is 'hung' repeated hits (short or 5-10 seconds) on the Reset button have no effect besides causing the DVD lights to blink (i.e., they seem to be getting a reset signal) but HDD light is still steady.
If I power the system down and restart it reboots OK - this means power down from the 'hung' state OR power down from Windows via 'Start' --> 'Turn off computer' or momentary push of power switch.
Looking at the Windows system log I see that warm boots done before many system processes load are successful, those afterwards are not. I have tried disabling these processes (i.e., App layer gateway, SSDP discovery, Norton protected storage) w/o any change in behavior.
This looks like a hardware problem to me, but I want to be sure it's one before I R&R the mobo w/ a spare.
Has anybody else seen this problem?
Thanks,
ss

Update:
It was the mobo - R&R w/new one: warm boot/reset problem gone. Plugged in drives w/o doing any software reinstall and unit came right up (and down and up and down....).
This is the second K8NGM2-FID that has gone south on me since March.
Both have been Ver 2.0 builds; the other one has a problem with onboard video but continues to function with an add-in video card (yah, it's better video too, but that's not the point). The warm boot problem described in the original post isn't a show stopper, either, but I can't use these boards in a system for sale (unless I sell it to my brother-in-law).
I have built eight systems since March using the K8NGM2-FID. Six were for customers and are still under my personal six month no-questions-asked warranty (the extended 12 month lots-of-questions-asked starts after six months). I have had to eat two at this point and am not too happy with the board. Since MSI no longer makes this board I am having to use another vendor's mATX-6150 unit, perhaps for the better, I don't know.
IMHO MSI is the best board maker in the consumer/office sector. I hope they can stay that way.
ss

IPod mini Battery & Reset Problems - So Annoying!

Hi Everyone!
My first post and it's a problem!
I bought the second generation iPod mini back at the very end of February this year. I love it to bits and i've used it every single day since i got it! I charge it whenever i need to (mostly every other day!).
But recently in the last 3/4 weeks its started to play up. It now resets itself at least 2/3 times a day and has started to become really annoying. The iPod will now no-longer charge fully at all, and it's says the battery's dead, and then it'll grow again! The battery symbol and the battery text will also come up frequently!
This is really starting to get on my nerves!
What can i do, i've only had it for nearly 8 months!
Please help and offer any suggestions!
Rich!

Hi Richard,
Sounds like you're having the same problem as me (I posted in a seperate post same time as you!!)
Hope someone can help us out, can't face having to send mine to Apple to be fixed and be without it for a week or two!!!
Jordan

Major 30G Photo Skipping/Stopping/Reset Problems

*I originally posted this under "5th Generation" which I think was a mistake, so I'm posting it here.*
Hi all. I'll try to give the short version of my major iPod problems I've been having. It's been going on for a couple months straight now.
The first thing that started happening was, in the middle of playing a song, it would freeze, and then start skipping through of the rest of the tracks on that playlist or album. It would sometimes make a "whirring" sound when going from track to track without playing them. Sometimes, this process would start instead when trying to manually skip from one song to another...it would just start to skip through tracks. It had to be restarted a bunch of times, and none of these problems had been present in the 2 or so years previous I owned it. Eventually, it showed an "unhappy face" and nothing else could be done.
I brought it back to Best Buy, where I bought it, as it was still under warranty for another year. They sent the iPod back to Apple for repairs. The "repaired" iPod was back in my hands in about 3 weeks, and for a week or so worked perfectly. Then, it started having the skipping tracks problem again.
Not long there after, it started having more serious problems. It needed to be resetted very frequently. The skipping of tracks, the first warning sign, became the least of it's problems. It needed to be completely restored. The first time it was restored, it got through about 600-1000 of the 5800 songs on it, then stopped and said the restore failed.
Other times, it showed the dreaded "1418" message. Other times it had messages like these:
Attempting to copy to the disk “Andrew’s iPod” failed. An unknown error occurred (-69).
The iPod “Andrew’s iPod” cannot be synced. The disk could not be read from or written to.
The iPod “Andrew’s iPod” cannot be synced. The required file cannot be found.
Eventually, it synced correctly. But the problems continued, and over the course of two weeks it had to be completely restored about 3 or 4 times, although it would then work again perfectly fine for, like, an hour.
So I took it back in again. This time, Best Buy told me that I would be quickly sent back a "Refurb" unit (a refurbished iPod that someone else had returned, I guess and had then been fixed or what have you.)
After a few days, I got the refurb unit. It's not my old iPod, I could tell just by looking at the front and back. And, for about 2 weeks, it worked absolutely perfectly. It reloaded like a charm, and played completely fine. The battery life seemed a little iffy, but nothing crazy.
Then, yesterday, this iPod that *is not* the same iPod I returned as far as I can tell, is having THE EXACT SAME PROBLEM. Yesterday, in the middle of a song that I had played many times before, it froze, stopped, and started skipping songs. It needed to be reset, what else is new. So, I did, and got the "unhappy face" with the address of iPod support once again.
I'm really confused. What is the problem here? When I had my first unit returned, I figured perhaps the problem hadn't been addressed. But this doesn't even appear to be the same unit.
Could there be a problem with iTunes 7.1.1 with my iPod? For what it's worth, I followed the advice found online to try to find corrupted music files, and can't find any. When it had restore problems with the last unit, I checked to see if it was stopping on any particular song, and it was different every time. Even so, I erased those songs just in case.
Also, when it freezes and stops now (and with the old unit, for that matter) it was never the same song. And it was almost always on a song that had already been played many times, perfectly fine, many times before, and recently to boot. I've also played through almost every song through iTunes over the last couple months to check for any obvious problems, and never found any.
With over 5750 songs on my iPod, I don't know how I can possibly know with complete certainty if there's anything with a problem amongst them, although completely erasing my iPod library that until 2 months ago never had a problem is kind of a worst case scenario.
What on earth could be wrong with my iPod? It's currently plugged into an outlet, vacillating between the Apple symbol and the "unhappy face." Anyone have ANY ideas?!?!?

Okay, my last word on the subject:
Please do not take this as any sort of real advice or a long term solution, as it almost certainly will not be based on my past experiences with this thing.
But, as I was preparing to go to bed and head out the door to Best Buy tomorrow, so that they could for the 3rd time in a month and a half "fix" my iPod or give me a "refurb unit," I tried one last terrible thing.
As I said above, it vacillated between the apple icon (unlit) and the sad-faced iPod when plugged into the wall, and the old fashioned lightning/battery when plugged into the computer. The computer didn't recognize it, iPod didn't recognizing it. Resetting did nothing. Restore was impossible. The original problem was, as had kept happening throughout this process, it would play some random song and then stop and start skipping through tracks, or it would simply skip through tracks when I tried to move manually from one song to another.
I'm so fed up with this thing after having it "fixed" several times in the last month, and even sort-of replaced, I did the thing some people suggest for you to do as a last resort.
I picked up the iPod, turned it over in my hand so the metallic side was facing out, and gave it one good, hard slap.
And now it works. I plugged it back into the computer, and it was fine and raring to go. All my files were there like nothing ever happened. It's playing right now.
What in the world is wrong with this thing when a SLAP "fixes" it, and absolutely nothing else will.
I don't get this thing, I tell ya.

IPod and JVC Car Stereo random resetting problem

Hey all,
I recently bought my first iPod (yay!), a 30gig 5th generation. I also had a JVC KD-PDR30 cd player installed in my car so that I could hook up the iPod to it and eliminate all the random cds cluttering up my vehicle. It works great -- most of the time... the last few days I've my iPod has been randomly resetting itself while connected to the car stereo -- it's connected through the dock port (not the headphone jack) and works 90% of the time. Even still, this is frustrating. I almost want to just connect it from the headphone jack to the aux in on the car stereo. Anyway, it only seems to do this while it is connected to the car stereo. I've never had a problem with the iPod resetting while using it outside of the car. Anyone have any suggestions? Thanks Apple community!!!
Theo

I had the JVC radio with iPod connector which worked just fine for my old iPod. When I upgraded to the iTouch I had to put in a new JVC stereo. The old version does not work with the iTouch (the same issues prev. stated). The new stereo has an USB hookup on the front. It plays the iTouch, but occas. the song or book will skip. At first I thought it was when I turned corners, but realized it was just random. A bit annoying. I looked at other stereos, but I could not get the iTouch and Sirus in the same unit, except for the JVC. If you can live without your iTouch I would wait until JVC or Apple address this issue. I could not live without either (I hate commercials!), so I made the jump to the first generation. I know better.

Who can help me :)--a problem with java program(reset problem in java )

I do not know how to make the button reset,my program only could reset diagram but button.If any one who could help me to solve this problem.The problem is When the reset button is pressed, the image should immediately revert to the black square, and the 4 widgets listed above should show values that
correspond to the black square.The code like this,first one is shapes:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
public class shapes extends JFrame {
     private JPanel buttonPanel; // panel for buttons
     private DrawPanel myPanel; // panel for shapes
     private JButton resetButton;
    private JComboBox colorComboBox;
     private JRadioButton circleButton, squareButton;
     private ButtonGroup radioGroup;
     private JCheckBox filledButton;
    private JSlider sizeSlider;
     private boolean isShow;
     private int shape;
     private boolean isFill=true;
    private String colorNames[] = {"black", "blue", "cyan", "darkGray", "gray",
                               "green", "lightgray", "magenta", "orange",
                               "pink", "red", "white", "yellow"};   // color names list in ComboBox
    private Color colors[] = {Color.black, Color.blue, Color.cyan, Color.darkGray,
                          Color.gray, Color.green, Color.lightGray, Color.magenta,
                          Color.orange, Color.pink, Color.red, Color.white, Color.yellow};
     public shapes() {
         super("Draw Shapes");
         // creat custom drawing panel
        myPanel = new DrawPanel(); // instantiate a DrawPanel object
        myPanel.setBackground(Color.white);
         // set up resetButton
        // register an event handler for resetButton's ActionEvent
        resetButton = new JButton ("reset");
         resetButton.addActionListener(
          // anonymous inner class to handle resetButton events
             new ActionListener() {
                   // draw a black filled square shape after clicking resetButton
                 public void actionPerformed (ActionEvent event) {
                         // call DrawPanel method setShowStatus and pass an parameter
                      // to decide if show the shape
                     myPanel.setShowStatus(true);
                         isShow = myPanel.getShowStatus();
                         shape = DrawPanel.SQUARE;
                     // call DrawPanel method setShape to indicate shape to draw
                         myPanel.setShape(shape);
                     // call DrawPanel method setFill to indicate to draw a filled shape
                         myPanel.setFill(true);
                     // call DrawPanel method draw
                         myPanel.draw();
                         myPanel.setFill(true);
                         myPanel.setForeground(Color.black);
               }// end anonymous inner class
         );// end call to addActionListener
        // set up colorComboBox
        // register event handlers for colorComboBox's ItemEvent
        colorComboBox = new JComboBox(colorNames);
        colorComboBox.setMaximumRowCount(5);
        colorComboBox.addItemListener(
             // anonymous inner class to handle colorComboBox events
             new ItemListener() {
                 // select shape's color
                 public void itemStateChanged(ItemEvent event) {
                     if(event.getStateChange() == ItemEvent.SELECTED)
                         // call DrawPanel method setForeground
                         // and pass an element value of colors array
                         myPanel.setForeground(colors[colorComboBox.getSelectedIndex()]);
                    myPanel.draw();
            }// end anonymous inner class
        ); // end call to addItemListener
        // set up a pair of RadioButtons
        // register an event handler for RadioButtons' ItemEvent
         squareButton = new JRadioButton ("Square", true);
         circleButton = new JRadioButton ("Circle", false);
         radioGroup = new ButtonGroup();
         radioGroup.add(squareButton);
         radioGroup.add(circleButton);
        squareButton.addItemListener(
            // anonymous inner class to handle squareButton events
            new ItemListener() {
                   public void itemStateChanged (ItemEvent event) {
                       if (isShow==true) {
                             shape = DrawPanel.SQUARE;
                             myPanel.setShape(shape);
                             myPanel.draw();
               }// end anonymous inner class
         );// end call to addItemListener
         circleButton.addItemListener(
               // anonymous inner class to handle circleButton events
            new ItemListener() {
                   public void itemStateChanged (ItemEvent event) {
                         if (isShow==true) {
                             shape = DrawPanel.CIRCLE;
                             myPanel.setShape(shape);
                             myPanel.draw();
                         else
                             System.out.println("Please click Reset button first");
               }// end anonymous inner class
         );// end call to addItemListener
         // set up filledButton
        // register an event handler for filledButton's ItemEvent
        filledButton = new JCheckBox("Filled", true);
         filledButton.addItemListener(
          // anonymous inner class to handle filledButton events
        new ItemListener() {
              public void itemStateChanged (ItemEvent event) {
                if (isShow==true) {
                        if (event.getStateChange() == ItemEvent.SELECTED) {
                              isFill=true;
                              myPanel.setFill(isFill);
                              myPanel.draw();
                        else {
                            isFill=false;
                              myPanel.setFill(isFill);
                              myPanel.draw();
                else
                    System.out.println("Please click Reset button first");
          }// end anonymous inner class
         );// end call to addItemListener
        // set up sizeSlider
        // register an event handler for sizeSlider's ChangeEvent
        sizeSlider = new JSlider(SwingConstants.HORIZONTAL, 0, 300, 100);
        sizeSlider.setMajorTickSpacing(10);
        sizeSlider.setPaintTicks(true);
        sizeSlider.addChangeListener(
             // anonymous inner class to handle sizeSlider events
             new ChangeListener() {
                  public void stateChanged(ChangeEvent event) {
                      myPanel.setShapeSize(sizeSlider.getValue());
                         myPanel.draw();
             }// end anonymous inner class
         );// end call to addChangeListener
        // set up panel containing buttons
         buttonPanel = new JPanel();
        buttonPanel.setLayout(new GridLayout(4, 1, 0, 50));
         buttonPanel.add(resetButton);
         buttonPanel.add(filledButton);
        buttonPanel.add(colorComboBox);
        JPanel radioButtonPanel = new JPanel();
        radioButtonPanel.setLayout(new GridLayout(2, 1, 0, 20));
        radioButtonPanel.add(squareButton);
        radioButtonPanel.add(circleButton);
        buttonPanel.add(radioButtonPanel);
        // attach button panel & draw panel to content panel
        Container container = getContentPane();
        container.setLayout(new BorderLayout(10,10));
        container.add(myPanel, BorderLayout.CENTER);
         container.add(buttonPanel, BorderLayout.EAST);
        container.add(sizeSlider, BorderLayout.SOUTH);
        setSize(500, 400);
         setVisible(true);
     public static void main(String args[]) {
         shapes application = new shapes();
         application.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
}second one is drawpanel:
import java.awt.*;
import javax.swing.*;
public class DrawPanel extends JPanel {
     public final static int CIRCLE = 1, SQUARE = 2;
     private int shape;
     private boolean fill;
     private boolean showStatus;
    private int shapeSize = 100;
    private Color foreground;
     // draw a specified shape
    public void paintComponent (Graphics g){
          super.paintComponent(g);
          // find center
        int x=(getSize().width-shapeSize)/2;
          int y=(getSize().height-shapeSize)/2;
          if (shape == CIRCLE) {
             if (fill == true){
                 g.setColor(foreground);
                  g.fillOval(x, y, shapeSize, shapeSize);
            else{
                   g.setColor(foreground);
                g.drawOval(x, y, shapeSize, shapeSize);
          else if (shape == SQUARE){
             if (fill == true){
                 g.setColor(foreground);
                    g.fillRect(x, y, shapeSize, shapeSize);
            else{
                    g.setColor(foreground);
                g.drawRect(x, y, shapeSize, shapeSize);
    // set showStatus value
    public void setShowStatus (boolean s) {
          showStatus = s;
     // return showstatus value
    public boolean getShowStatus () {
          return showStatus;
     // set fill value
    public void setFill(boolean isFill) {
          fill = isFill;
     // set shape value
    public void setShape(int shapeToDraw) {
          shape = shapeToDraw;
    // set shapeSize value
    public void setShapeSize(int newShapeSize) {
          shapeSize = newShapeSize;
    // set foreground value
    public void setForeground(Color newColor) {
          foreground = newColor;
     // repaint DrawPanel
    public void draw (){
          if(showStatus == true)
          repaint();
}If any kind people who can help me.
many thanks to you!

4 widgets???
maybe this is what you mean.
add this inside your actionPerformed method for the reset action
squareButton.setSelected(true);
colorComboBox.setSelectedIndex(0);
if not be more clear in your post.

A problem with java program(reset problem in java GUY)

I do not know how to make the button reset,my program only could reset diagram but button.If any one who could help me to solve this problem.The problem is When the reset button is pressed, the image should immediately revert to the black square, and the 4 widgets listed above should show values that
correspond to the black square.
import java.awt.*;
import javax.swing.*;
public class DrawPanel extends JPanel {
     public final static int CIRCLE = 1, SQUARE = 2;
     private int shape;
     private boolean fill;
     private boolean showStatus;
    private int shapeSize = 100;
    private Color foreground;
     // draw a specified shape
    public void paintComponent (Graphics g){
          super.paintComponent(g);
          // find center
        int x=(getSize().width-shapeSize)/2;
          int y=(getSize().height-shapeSize)/2;
          if (shape == CIRCLE) {
             if (fill == true){
                 g.setColor(foreground);
                  g.fillOval(x, y, shapeSize, shapeSize);
            else{
                   g.setColor(foreground);
                g.drawOval(x, y, shapeSize, shapeSize);
          else if (shape == SQUARE){
             if (fill == true){
                 g.setColor(foreground);
                    g.fillRect(x, y, shapeSize, shapeSize);
            else{
                    g.setColor(foreground);
                g.drawRect(x, y, shapeSize, shapeSize);
    // set showStatus value
    public void setShowStatus (boolean s) {
          showStatus = s;
     // return showstatus value
    public boolean getShowStatus () {
          return showStatus;
     // set fill value
    public void setFill(boolean isFill) {
          fill = isFill;
     // set shape value
    public void setShape(int shapeToDraw) {
          shape = shapeToDraw;
    // set shapeSize value
    public void setShapeSize(int newShapeSize) {
          shapeSize = newShapeSize;
    // set foreground value
    public void setForeground(Color newColor) {
          foreground = newColor;
     // repaint DrawPanel
    public void draw (){
          if(showStatus == true)
          repaint();
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
public class shapes extends JFrame {
     private JPanel buttonPanel; // panel for buttons
     private DrawPanel myPanel; // panel for shapes
     private JButton resetButton;
    private JComboBox colorComboBox;
     private JRadioButton circleButton, squareButton;
     private ButtonGroup radioGroup;
     private JCheckBox filledButton;
    private JSlider sizeSlider;
     private boolean isShow;
     private int shape;
     private boolean isFill=true;
    private String colorNames[] = {"black", "blue", "cyan", "darkGray", "gray",
                               "green", "lightgray", "magenta", "orange",
                               "pink", "red", "white", "yellow"};   // color names list in ComboBox
    private Color colors[] = {Color.black, Color.blue, Color.cyan, Color.darkGray,
                          Color.gray, Color.green, Color.lightGray, Color.magenta,
                          Color.orange, Color.pink, Color.red, Color.white, Color.yellow};
     public shapes() {
         super("Draw Shapes");
         // creat custom drawing panel
        myPanel = new DrawPanel(); // instantiate a DrawPanel object
        myPanel.setBackground(Color.white);
         // set up resetButton
        // register an event handler for resetButton's ActionEvent
        resetButton = new JButton ("reset");
         resetButton.addActionListener(
          // anonymous inner class to handle resetButton events
             new ActionListener() {
                   // draw a black filled square shape after clicking resetButton
                 public void actionPerformed (ActionEvent event) {
                         // call DrawPanel method setShowStatus and pass an parameter
                      // to decide if show the shape
                     myPanel.setShowStatus(true);
                         isShow = myPanel.getShowStatus();
                         shape = DrawPanel.SQUARE;
                     // call DrawPanel method setShape to indicate shape to draw
                         myPanel.setShape(shape);
                     // call DrawPanel method setFill to indicate to draw a filled shape
                         myPanel.setFill(true);
                     // call DrawPanel method draw
                         myPanel.draw();
                         myPanel.setFill(true);
                         myPanel.setForeground(Color.black);
               }// end anonymous inner class
         );// end call to addActionListener
        // set up colorComboBox
        // register event handlers for colorComboBox's ItemEvent
        colorComboBox = new JComboBox(colorNames);
        colorComboBox.setMaximumRowCount(5);
        colorComboBox.addItemListener(
             // anonymous inner class to handle colorComboBox events
             new ItemListener() {
                 // select shape's color
                 public void itemStateChanged(ItemEvent event) {
                     if(event.getStateChange() == ItemEvent.SELECTED)
                         // call DrawPanel method setForeground
                         // and pass an element value of colors array
                         myPanel.setForeground(colors[colorComboBox.getSelectedIndex()]);
                    myPanel.draw();
            }// end anonymous inner class
        ); // end call to addItemListener
        // set up a pair of RadioButtons
        // register an event handler for RadioButtons' ItemEvent
         squareButton = new JRadioButton ("Square", true);
         circleButton = new JRadioButton ("Circle", false);
         radioGroup = new ButtonGroup();
         radioGroup.add(squareButton);
         radioGroup.add(circleButton);
        squareButton.addItemListener(
            // anonymous inner class to handle squareButton events
            new ItemListener() {
                   public void itemStateChanged (ItemEvent event) {
                       if (isShow==true) {
                             shape = DrawPanel.SQUARE;
                             myPanel.setShape(shape);
                             myPanel.draw();
               }// end anonymous inner class
         );// end call to addItemListener
         circleButton.addItemListener(
               // anonymous inner class to handle circleButton events
            new ItemListener() {
                   public void itemStateChanged (ItemEvent event) {
                         if (isShow==true) {
                             shape = DrawPanel.CIRCLE;
                             myPanel.setShape(shape);
                             myPanel.draw();
                         else
                             System.out.println("Please click Reset button first");
               }// end anonymous inner class
         );// end call to addItemListener
         // set up filledButton
        // register an event handler for filledButton's ItemEvent
        filledButton = new JCheckBox("Filled", true);
         filledButton.addItemListener(
          // anonymous inner class to handle filledButton events
        new ItemListener() {
              public void itemStateChanged (ItemEvent event) {
                if (isShow==true) {
                        if (event.getStateChange() == ItemEvent.SELECTED) {
                              isFill=true;
                              myPanel.setFill(isFill);
                              myPanel.draw();
                        else {
                            isFill=false;
                              myPanel.setFill(isFill);
                              myPanel.draw();
                else
                    System.out.println("Please click Reset button first");
          }// end anonymous inner class
         );// end call to addItemListener
        // set up sizeSlider
        // register an event handler for sizeSlider's ChangeEvent
        sizeSlider = new JSlider(SwingConstants.HORIZONTAL, 0, 300, 100);
        sizeSlider.setMajorTickSpacing(10);
        sizeSlider.setPaintTicks(true);
        sizeSlider.addChangeListener(
             // anonymous inner class to handle sizeSlider events
             new ChangeListener() {
                  public void stateChanged(ChangeEvent event) {
                      myPanel.setShapeSize(sizeSlider.getValue());
                         myPanel.draw();
             }// end anonymous inner class
         );// end call to addChangeListener
        // set up panel containing buttons
         buttonPanel = new JPanel();
        buttonPanel.setLayout(new GridLayout(4, 1, 0, 50));
         buttonPanel.add(resetButton);
         buttonPanel.add(filledButton);
        buttonPanel.add(colorComboBox);
        JPanel radioButtonPanel = new JPanel();
        radioButtonPanel.setLayout(new GridLayout(2, 1, 0, 20));
        radioButtonPanel.add(squareButton);
        radioButtonPanel.add(circleButton);
        buttonPanel.add(radioButtonPanel);
        // attach button panel & draw panel to content panel
        Container container = getContentPane();
        container.setLayout(new BorderLayout(10,10));
        container.add(myPanel, BorderLayout.CENTER);
         container.add(buttonPanel, BorderLayout.EAST);
        container.add(sizeSlider, BorderLayout.SOUTH);
        setSize(500, 400);
         setVisible(true);
     public static void main(String args[]) {
         shapes application = new shapes();
         application.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
}Many thanks

Who is this Java guy anyway?

Getting My Password Reset Problems:

I tried to reset my security questions by clicking the button that makes apple send you an email with a link to reset your password. Yet I've never got it, its been a week that I've had this problem! please help!
Twitter @SnowHeroHD
Any help would be much appriciated here or on twitter,
thanks in advance.

(This is for itunes, I'm simply using a new device so its asking for all this)

Digital clock reset problem with 74193N

Hi, i'm designing a digital clock circuit.
However, i faced problems during reset part.
when i tried to reset on 3(U11) with 1 NAND gate and 2 NOR gates,
i think i don't make mistake to reset with 0011(U3),how come the 3 will also appear on the seven-segment display?
Well,i also wonder how can i reset the other seven-segment display(U9) to show the following sequences:
0,1,2,3,4,5,6,7,8,9,0,1,2,3,0,1,2,3,4,5,6,7,8,9,0,1,2,3,0..
Lastly, is that possible to configure the transmition speed in multisim 11.0?
Thanks..
Attachments:
NEW140712.ms11 ‏363 KB

Hi,
There were a few problems with the circuit which is why the clock was not reseting at 3. I have modified the file. Please take a look and see. You will need to add a buffer between the second input and the AND gate because otherwise, the gate will trigger before the output has actually reached the desired state.
I had to edit the delay time in the buffer to make it work of this circuit. To edit the delay time, double-click the Buffer and under the Value tab, click on Edit Model. You can change the rise time and fall time from this window.
Hope this helps.
Regards,
Tayyab R,
National Instruments.
Attachments:
NEW140712 mod.ms11 ‏545 KB

Form reset problem

Hi all,
I have a cfform containing 3 related cfselects (i.e. bind
parameters connecting them), and it all works fine. However, I just
noticed one problem: the form contains a Reset button to clear all
of the form fields, which it does, but when the first cfselect is
reset to it's first option, the bindings are not re-triggered so
the other two cfselects do not contain the correct options. I tried
adding an onreset="document.myform.firstselectid.onchange();" to
the cfform tag, but that didn't work (throws a js error). BTW, I'm
testing all of this in IE7 since that's what my client uses.
Anyone know how I can get the bindings to update when the
form is reset?
Thanks,
Russ

Clearly I have not explained the problem well enough, since
the fact that I'm binding to cfcs has nothing to do with the
problem. Here's a simplified version of the relevant code:
<cfselect name="Type" id="Type"
bind="cfc:MyCFC.GetTypes()" bindonload="yes" />
<cfselect name="Manu" id="Manu"
bind="cfc:MyCFC.GetManus({Type})" />
<cfselect name="Model" id="Model"
bind="cfc:MyCFC.GetModels({Type@none},{Manu})" />
When the user selects a Type from the first list, the Manu
list uses it's binding to get the associated manufacturers and then
the Model list uses it's binding to get the models for that type
and manufacturer. It works just fine (has for a long time).
The cfform has a reset button (<input name="Reset"
type="reset" value="Clear Form">), and when you click it to
reset the form, it does just that, setting each cfselect to it's
first option. However, the fact that the Type cfselect got reset to
it's first option does not cause the Manu and then Models cfselects
to refresh from their bindings like they would if the user had
selected the first Type option. That is the problem.
I had hoped that simply following the reset with a js call to
document.myform.Type.onchange(); would initiate the refresh, but
document.myform.Type.onchange turns out to be null, so no go.
I'm aware of an undocumented js function
ColdFusion.Bind.assignValue that I've seen used for refreshing a
cfselect that binds to a js function, but I have not seen any use
of it when binding to a cfc.
Your thoughts?
Thanks,
Russ

ICloud account password reset problems

Hello!
I registered an iCloud account for my iPad mini. My username is [email protected]
The problem is I forgot the password. I asked for a password reset at iforgot.apple.com.
I checked all of my e-mail accounts when I figured out the email adress for my iCloud account is the [email protected] As I told I don't know my password so I can't sign in to my iCloud email to reset the password.
Please help me, because I restored my iPad and I can't activate it without sing in to iCloud.
Thanks,
oliverus

Did you set security questions? If yes, this might help you get in.
Another place to look is in Keychain Access and in your Browser settings.
Open Keychain Access in Applications/Utilities.
Select Login keychain in the top right.
You can enter iCloud in the top search box but you can also scroll through the list looking for the entry.
If you see the blue circle with @, select. Double click to open
You'll see the actual account listed so you'll know if it's the correct one.
Check the box to show password.
Enter your Login password for your User.
You'll see the password.
You might need to check several entries.
In Safari, go to Preferences > Passwords.
Check box to Show passwords.
Select the icloud.com site
Click on the password to view after entering your Login password for User.
If you used FireFox or Chrome, you would need to look in their preferences for the password.
TIP: When you can get in, add multiple recovery emails to the account. Write down your password and recovery emails and keep in a safe place. I recommend 1Password http://agilewebsolutions.com/products/1Password
I use a lot of fake answers and it's hard to remember so I keep these in secure notes in 1Password.
Tip: when Yosemite is released you might see 1Password on sale. It's not cheap but worth every penny.

Password Reset problems

I tried to reset my password following these instructions
https://support.skype.com/en/faq/FA95/How-do-I-change-my-password/
But when I clicked on Change Password , It would only let me type in the Old Password. I was unable to click on the New Password boxes, unable to type anything in them. Couldnt even use TAB key to move to them. Im running Windows XP Pro in case its relevant. I've never ever had problems selecting and typing in a text window like that before.
I ended up having to submit a lost password email reset even though I still knew my old password. So that worked and I was able to reset my password and log in that way.
But I just thought I should post to let Skype know that their method for resetting new password didnt work.

Restart the computer with the Option key held down and see if a padlock appears on the screen; if so, you will need to provide the firmware password, an the C key shortcut is disabled. If not, insert the DVD, push the button with the curly arrow, click on the DVD, and then the button with the straight arrow.
(29168)

Default reset problem

My wrt120n router will not reset or if it dose the pw:admin is not valid.
I held down the reset botton for 5 sec., 10 sec., 30 sec., 1 min., & 2 min.
and powered down for same amount of time, still not able to use pw:admin
with username blank. So I'm thinking lets update firmware it said it fixes a
reset botton behavior problem great just what I believe I've got. Now to update
firmware it said you need to go to the 192.168.1.1 menu page, great now I'm
really _______ cause password don't work and can't reset the router to
allow me to get the main menu page, any ideas, oh I tryed the setup cd
too same results with the password.

How do they say it, you have one chance to make a first impress, you blew it linksys,
i've got a wired router that's linksys I've had for 8 years it great never had a
problem, oh the password and reset works fine on that, but it's the last item
with linksys name on it I'll have. I'm taking the wrt120n _ _ _ back were I brought it
get another brand wireless router.
Oh resetting for 10 sec. power down then power for 10 sec. before releasing reset
dose not work either.

WRTP54G Password reset problem

Hello, I recently plugged my wireless router back up from storage and I reset the router and try logging it the site (http://192.168.15.1/cgi-bin/webcm) to change my settings but I can not log in. I tried using admin as the password but an error message pops up stating "Error: User not allowed to login this user level." I cannot find the CD that came with this router. The internet LED light just blinks when I plug everything up. Any help will do please!!!!

I have a similAR PASSWORD PROBLEM WITH MY WRT54GS. I am switching from Hughes Satellite to DSL. I put in the username and password but when I continue, the router adds characters to the password. Is there a way to reset so it only takes the new password?

RE resetting problems

Similar Messages

Maybe you are looking for