Re: RLC
Hi frnds,
I designed RLC circuit using labview. Everything is working fine but still I couldn't see any waveform in the XY graph.
kindly help m to fix this issue.
For your reference i attach my RLC vi. please have a look and let me you if there is any correction
Solved!
Go to Solution.
Attachments:
RLC.vi 43 KB
You forget to make 'RESET' false (which is by default TRUE).
Also there is direct function available for 'Square'... by mistake I mentioned it as 'Use SQUARE ROOT function'... just ignore it...
Also find attached edited VI.
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT.
Attachments:
RLC_EDITED.vi 44 KB
Similar Messages
-
RLC circuit AC simulation result does not match transient analysis result at resonant frequency!
Hi,
It is a very basic series RLC circuit. (R=0.1 Ohm, L=10mH, C=100nF) which is excited by a sine wave voltage source (100mV peak, 5032 Hz).
AC analysis is in-line with hand calculations and shows a peak current of 1A at 5032.9 Hz. Once we do a transient analysis at this frequency, the current is way lower; instead if we change the frequency down to 4968 Hz, it gives the maximum current (appx. 1A). Note that all the components are ideal and both amplitudes of the voltage source set at 100mV. I must be missing something very basic.
The attached file shows it clearer.
Thanks,
Attachments:
AC_vs_Transient_at_res.png 63 KBIt is basically caused by numerical error in high-Q circuits around resonance.
Here it is the link to similar discussion that I just found.
Click here to open the related post. -
Transient Analysis RLC circuit problem?
I am conducting a transient analysis of a series RLC circuit in multisim.
Using a 10VDC power supply, a switch, a 10 Henry inductor, a 10 Ohm resistor, and a 5 nF capacitor.
My calculations show that ILmax is 223uA at 700uS.
When I perform the transient analysis I am having the following problems:
If I choose "Automatically determine input conditions" then IL peaks at 700uS, but it peaks at 35pA instead of 223uA?
If I choose "User defined" as the initial condition then IL peaks at 223uA, but it occurs at 250uS instead of 700uS?
What am I doing wrong here?
I should be getting 223uA at 700uS???
Attachments:
transient analysis.png 5 KB
Transient RLC multisim.png 31 KBHi there,
How did you calculate ILmax (time and current)? What's your Multisim version?
Regards,
Fernando D.
National Instruments -
tested multisim for Parallel RLC Circuit with voltage source as in
http://www.electronics-tutorials.ws/accircuits/parallel-circuit.html
But the current flows through the inductance L has DC component as in the picture attached (the red sine wave). Is it a bug ?, please tell me how to correct it.
Attachments:
phasor.jpg 183 KBHi there,
As strange as this may sound, this is not a bug. OK, this sounds really funny, but I am totally serious, and I am going to explain why:
In a circuit energy must be conserved.
An inductor is a purely reactive component, that is, it does not dissipate any power.
When simulation starts, Multisim assumes the inductor current to be 0, which may seem reasonable. The voltage across the inductor is also 0 at this point. This is the initial condition.
The voltage across the inductor increases, and thus, the current increases. The current keeps increasing during the first 2 quadrants of the sinusoidal phase output.
The current never decreases until the voltage drop is negative.
But by the time an entire cycle is over, the current is back to 0. This makes sense as energy is conserved and the inductor is not absorbing any energy.
OK. Now look at what happened. During the whole cycle, the current was positive only! The current increased during the first half of the cycle and returned to 0 during the second half. This is because of the fluke of initial conditions! In fact, a good circuit simulator will maintain the DC offset for a long duration. The DC offset may drift because of rounding errors and the like.
This will never be observed in real life as real inductors have winding resistance and other problems.
OK, so, if you would like to see no DC offset, do the following:
Run your simulation
Record the DC offset that you want to eliminate
Stop your simulation
Double click the offending inductor in the Multisim schematic
Click on the Value tab
Check the Initial conditions box under Additional SPICE simulation parameters
Enter the negative of the DC offset that you recorded in step 2 into the box right next to it
Start your simulation. Did your offset go away? Or did it double?
If your offset doubled, take away the sign from the DC offset that you entered in step 7. I bet you know why.
It took me a while to figure this one out. Hope that helps!
Yi
Software Developer
National Instruments - Electronics Workbench Group -
Hi All,
I have a problem to see the details of the transaction data deleted when i run this program in background.
in Foreground i can see the details however the unable to see the details after running this in background mode.
any thing i need to set or check.
-ShriHi Shridhar,
In the RLC delete screen, if you press Ctrl + F1, it will show the detailed log of the transactional data deleted.
Hope this will solve your query.
Please confirm.
Regards
R. Senthil Mareeswaran. -
Calculate Impedance, Power Factor & Type Of Power In RLC Circuit
Good Evening
No suprises to what im looking to investigate today.
I have a initial circuit which contains a AC supply, Resistor and Inductor only, I must calculate the impedance, supply current, power factor & angle, and type of power that is consumed in the circuit.
I must then create a modified circuit in which i must improve the power factor to 0.95 and specify the value of capacitance required!
I must then calculate the impedance, supply current, power factor & angle and the type of power consumed in the circuit.
I have never really used multisim before, just want to make sure my calculations are correct as the values I have been given to work with are producing tedious amounts of impedance. My XL=24kOhm
I have tried to use the impedometer but not quiet sure how to wire it correctly. Same goes for the watt meter not sure how to wire the terminals for V and I.
Appreciate any help and advice I have provided some images of my initial circuit I have not specified the value of C as im not sure what it must be to give me a PF of 0.95.
Regards
Ps pardon the amatuer mistake forgot to add a ground (fool)
Carl
Attachments:
INITIAL.png 44 KB
MOD.png 44 KBHi Hass,
Here is an article on Calculating the Impedance in Multisim.
http://digital.ni.com/public.nsf/allkb/9F8D30235DE3EC0186257592006B23A2
Similarly, you can add Expression to Calculate the Power Factor or other circuit parameters.
Hope this helps!
Regards,
Chen_T
National Instruments -
Problem With httpd.conf and mod_rewrite rules Apache 2.2
I have some RewriteRules that are working on my Leopard Client Apache 2.2 machine - but when I try to implement them on Leopard Server Apache 2.2, they don't work. I don't get any errors, they just won't execute.
Could somebody with Leopard Server help me out using the below info?
Here are the rules I am trying to add: (below is the httpd.conf file)
======RULES========
RewriteEngine On
Options +FollowSymLinks
RewriteRule ^(.+)/$ http://%{HTTP_HOST}$1 [R=301, L]
# Remove ".php"
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.php(.*)\ HTTP
RewriteRule (.+)\.php(.*)$ $1$2 [R, L]
# Remove ".asp"
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.asp(.*)\ HTTP
RewriteRule (.+)\.asp(.*)$ $1$2 [R, L]
# Remove ".aspx"
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.aspx(.*)\ HTTP
RewriteRule (.+)\.aspx(.*)$ $1$2 [R, L]
# Remove ".htm" and ".html"
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.htm.(.)\ HTTP
RewriteRule (.+)\.htm.(.)$ $1$2 [R, L]
# Remove ".cfm"
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.cfm(.*)\ HTTP
RewriteRule (.+)\.cfm(.*)$ $1$2 [R, L]
# Remove ".bak"
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.bak(.*)\ HTTP
RewriteRule (.+)\.bak(.*)$ $1$2 [R, L]
# Remove ".inc"
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.inc(.*)\ HTTP
RewriteRule (.+)\.inc(.*)$ $1$2 [R, L]
# Remove ".*"
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\..(.)\ HTTP
RewriteRule (.+)\..(.)$ $1$2 [R, L]
=====RULES============
=========HTTPD.CONF=============
#### Default httpd.conf for Mac OS X Server, Apache 2.2
#### This httpd.conf differs from the httpd.conf distributed
#### with Apache and the httpd.conf present on Mac OS X.
#### Feel free to edit this; the Server Admin app also edits this file but will
#### respect your changes unless noted below. See also ReadMe.txt.
## ServerRoot: The top of the directory tree under which the server's
## configuration, error, and log files are kept.
## NOTE! If you intend to place this on an NFS (or otherwise network)
## mounted filesystem then please read the LockFile documentation
## (available at <URL:<a class="jive-link-external-small" href="http://">http://www.apache.org/docs/mod/core.html#lockfile>);
## you will save yourself a lot of trouble.
## Do NOT add a slash at the end of the directory path.
ServerRoot "/usr"
## PidFile: The file in which the server should record its process
## identification number when it starts.
PidFile /var/run/httpd.pid
## ScoreBoardFile: File used to store internal server process information.
## Not all architectures require this. But if yours does (you'll know because
## this file will be created when you run Apache) then you must ensure that
## no two invocations of Apache share the same scoreboard file.
#ScoreBoardFile "/var/run/apache2runtimestatus"
## Server-pool size regulation. Rather than making you guess how many
## server processes you need, Apache dynamically adapts to the load it
## sees --- that is, it tries to maintain enough server processes to
## handle the current load, plus a few spare servers to handle transient
## load spikes (e.g., multiple simultaneous requests from a single
## Netscape browser).
## It does this by periodically checking how many servers are waiting
## for a request. If there are fewer than MinSpareServers, it creates
## a new spare. If there are more than MaxSpareServers, some of the
## spares die off. The default values are probably OK for most sites.
MinSpareServers 1
MaxSpareServers 1
## Number of servers to start initially --- should be a reasonable ballpark
## figure.
StartServers 1
## MaxRequestsPerChild: the number of requests each child process is
## allowed to process before the child dies. The child will exit so
## as to avoid problems after prolonged use when Apache (and maybe the
## libraries it uses) leak memory or other resources. On most systems, this
## isn't really needed, but a few (such as Solaris) do have notable leaks
## in the libraries. For these platforms, set to something like 10000
## or so; a setting of 0 means unlimited.
## NOTE: This value does not include keepalive requests after the initial
## request per connection. For example, if a child process handles
## an initial request and 10 subsequent "keptalive" requests, it
## would only count as 1 request towards this limit.
MaxRequestsPerChild 100000
## Dynamic Shared Object (DSO) Support
## To be able to use the functionality of a module which was built as a DSO you
## have to place corresponding `LoadModule' lines at this location so the
## directives contained in it are actually available before they are used.
## Please read the file http://httpd.apache.org/docs/dso.html for more
## details about the DSO mechanism and run `httpd -l' for the list of already
## built-in (statically linked and thus always available) modules in your httpd
## binary.
## Note: The order in which modules are loaded is important. Don't change
## the order below without expert advice.
## Example:
## LoadModule foo_module libexec/mod_foo.so
#### For Mac OS X Server: Note that the Server Admin application
#### and the apxs utility enable and disable modules
#### by removing and adding a comment character.
LoadModule authnfilemodule libexec/apache2/modauthnfile.so
#LoadModule authndbmmodule libexec/apache2/modauthndbm.so
#LoadModule authnanonmodule libexec/apache2/modauthnanon.so
#LoadModule authndbdmodule libexec/apache2/modauthndbd.so
#LoadModule authndefaultmodule libexec/apache2/modauthndefault.so
LoadModule authzhostmodule libexec/apache2/modauthzhost.so
#LoadModule authzgroupfilemodule libexec/apache2/modauthzgroupfile.so
#LoadModule authzusermodule libexec/apache2/modauthzuser.so
#LoadModule authzdbmmodule libexec/apache2/modauthzdbm.so
#LoadModule authzownermodule libexec/apache2/modauthzowner.so
#LoadModule authzdefaultmodule libexec/apache2/modauthzdefault.so
#LoadModule authbasicmodule libexec/apache2/modauthbasic.so
#LoadModule authdigest_applemodule libexec/apache2/modauth_digestapple.so
LoadModule cache_module libexec/apache2/mod_cache.so
LoadModule memcachemodule libexec/apache2/modmemcache.so
LoadModule diskcachemodule libexec/apache2/moddiskcache.so
#LoadModule dbd_module libexec/apache2/mod_dbd.so
LoadModule dumpio_module libexec/apache2/mod_dumpio.so
LoadModule extfiltermodule libexec/apache2/modextfilter.so
LoadModule include_module libexec/apache2/mod_include.so
LoadModule filter_module libexec/apache2/mod_filter.so
LoadModule deflate_module libexec/apache2/mod_deflate.so
LoadModule logconfigmodule libexec/apache2/modlogconfig.so
LoadModule logio_module libexec/apache2/mod_logio.so
LoadModule env_module libexec/apache2/mod_env.so
LoadModule expires_module libexec/apache2/mod_expires.so
LoadModule headers_module libexec/apache2/mod_headers.so
LoadModule ident_module libexec/apache2/mod_ident.so
LoadModule setenvif_module libexec/apache2/mod_setenvif.so
LoadModule proxy_module libexec/apache2/mod_proxy.so
#LoadModule proxyconnectmodule libexec/apache2/modproxyconnect.so
#LoadModule proxyftpmodule libexec/apache2/modproxyftp.so
LoadModule proxyhttpmodule libexec/apache2/modproxyhttp.so
#LoadModule proxyajpmodule libexec/apache2/modproxyajp.so
LoadModule proxybalancermodule libexec/apache2/modproxybalancer.so
LoadModule ssl_module libexec/apache2/mod_ssl.so
LoadModule mime_module libexec/apache2/mod_mime.so
#LoadModule mimemagicmodule libexec/apache2/modmimemagic.so
#LoadModule dav_module libexec/apache2/mod_dav.so
LoadModule status_module libexec/apache2/mod_status.so
LoadModule autoindex_module libexec/apache2/mod_autoindex.so
LoadModule asis_module libexec/apache2/mod_asis.so
LoadModule info_module libexec/apache2/mod_info.so
LoadModule cgi_module libexec/apache2/mod_cgi.so
#LoadModule davfsmodule libexec/apache2/moddavfs.so
LoadModule vhostaliasmodule libexec/apache2/modvhostalias.so
LoadModule negotiation_module libexec/apache2/mod_negotiation.so
LoadModule dir_module libexec/apache2/mod_dir.so
LoadModule imagemap_module libexec/apache2/mod_imagemap.so
LoadModule actions_module libexec/apache2/mod_actions.so
LoadModule speling_module libexec/apache2/mod_speling.so
LoadModule userdir_module libexec/apache2/mod_userdir.so
LoadModule alias_module libexec/apache2/mod_alias.so
LoadModule rewrite_module libexec/apache2/mod_rewrite.so
#LoadModule php5_module libexec/apache2/libphp5.so
#LoadModule encoding_module libexec/apache2/mod_encoding.so
#LoadModule jk_module libexec/apache2/mod_jk.so
#LoadModule applespotlightmodule libexec/apache2/modspotlightapple.so
#LoadModule bonjour_module libexec/apache2/mod_bonjour.so
LoadModule appleauthmodule libexec/apache2/modauthapple.so
LoadModule spnegoauthmodule libexec/apache2/modspnegoapple.so
LoadModule appledigestmodule libexec/apache2/moddigestapple.so
LoadModule hfsapplemodule libexec/apache2/modhfsapple.so
#LoadModule fastcgi_module libexec/apache2/mod_fastcgi.so
#LoadModule scgipubsubmodule libexec/apache2/modscgipubsub.so
#LoadModule davsvnmodule libexec/apache2/moddavsvn.so
#LoadModule authzsvnmodule libexec/apache2/modauthzsvn.so
## If you wish httpd to run as a different user or group, you must run
## httpd as root initially and it will switch.
## User/Group: The name (or #number) of the user/group to run httpd as.
## It is usually good practice to create a dedicated user and group for
## running httpd, as with most system services.
User www
Group www
## Each directory to which Apache has access, can be configured with respect
## to which services and features are allowed and/or disabled in that
## directory (and its subdirectories).
## First, we configure the "default" to be a very restrictive set of
## features.
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
## UserDir: The name of the directory which is appended onto a user's home
## directory if a ~user request is received.
#### For Mac OS X Server: Note that
#### personal websharing is not supported on Mac OS X Server.
<IfModule mod_userdir.c>
UserDir Sites
</IfModule>
## AccessFileName: The name of the file to look for in each directory
## for access control information.
AccessFileName .htaccess
## The following lines prevent .htaccess files from being viewed by
## Web clients.
#### For Mac OS X Server: Note the case-insensitive pattern, which protects
#### .htaccess fils on HFS volumes.
#### (Note: Denying .DS_S* may interfere with Finder WebDAV operation)
<Files ~ "^\.([Hh][Tt]|[Dd][Ss]_[Ss])">
Order allow,deny
Deny from all
Satisfy All
</Files>
#### Block attempts to circumvent access controls by requesting forks.
<Files "rsrc">
Order allow,deny
Deny from all
Satisfy All
</Files>
<DirectoryMatch ".*\.\.namedfork">
Order allow,deny
Deny from all
Satisfy All
</DirectoryMatch>
## DefaultType is the default MIME type the server will use for a document
## if it cannot otherwise determine one, such as from filename extensions.
## If your server contains mostly text or HTML documents, "text/plain" is
## a good value. If most of your content is binary, such as applications
## or images, you may want to use "application/octet-stream" instead to
## keep browsers from trying to display binary files as though they are
## text.
DefaultType text/plain
<IfModule mod_mime.c>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig /dev/null
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddOutputFilter INCLUDES .shtml
## Although mod_mime may support several extensions following a single
## mime type (ex: "AddType video/quicktime qt mov"), the parser used
## by the Server Admin application expects only one extension per line.
AddHandler send-as-is asis
AddHandler cgi-script cgi
AddHandler fastcgi-script fcgi
AddHandler imap-file map
AddHandler server-parsed shtml
AddHandler type-map var
AddHandler spotlight-search spotlight
AddType application/andrew-inset ez
AddType application/atom+xml atom
AddType application/atomcat+xml atomcat
AddType application/atomsvc+xml atomsvc
AddType application/ccxml+xml ccxml
AddType application/davmount+xml davmount
AddType application/ecmascript ecma
AddType application/font-tdpfr pfr
AddType application/hyperstudio stk
AddType application/javascript js
AddType application/json json
AddType application/mac-binhex40 hqx
AddType application/mac-compactpro cpt
AddType application/marc mrc
AddType application/mathematica ma
AddType application/mathematica mb
AddType application/mathematica nb
AddType application/mathml+xml mathml
AddType application/mbox mbox
AddType application/mediaservercontrol+xml mscml
AddType application/mp4 mp4s
AddType application/msword doc
AddType application/msword dot
AddType application/mxf mxf
AddType application/octet-stream bin
AddType application/octet-stream bpk
AddType application/octet-stream class
AddType application/octet-stream dist
AddType application/octet-stream distz
AddType application/octet-stream dmg
AddType application/octet-stream dms
AddType application/octet-stream dump
AddType application/octet-stream elc
AddType application/octet-stream iso
AddType application/octet-stream lha
AddType application/octet-stream lzh
AddType application/octet-stream scpt
AddType application/octet-stream so
AddType application/oda oda
AddType application/ogg ogg
AddType application/pdf pdf
AddType application/pgp-encrypted pgp
AddType application/pgp-signature asc
AddType application/pgp-signature sig
AddType application/pics-rules prf
AddType application/pkcs10 p10
AddType application/pkcs7-mime p7c
AddType application/pkcs7-mime p7m
AddType application/pkcs7-signature p7s
AddType application/pkix-cert cer
AddType application/pkix-crl crl
AddType application/pkix-pkipath pkipath
AddType application/pkixcmp pki
AddType application/pls+xml pls
AddType application/postscript ai
AddType application/postscript eps
AddType application/postscript ps
AddType application/prs.cww cww
AddType application/rdf+xml rdf
AddType application/reginfo+xml rif
AddType application/relax-ng-compact-syntax rnc
AddType application/resource-lists+xml rl
AddType application/rls-services+xml rs
AddType application/rsd+xml rsd
AddType application/rss+xml rss
AddType application/rtf rtf
AddType application/sbml+xml sbml
AddType application/sdp sdp
AddType application/set-payment-initiation setpay
AddType application/set-registration-initiation setreg
AddType application/shf+xml shf
AddType application/smil+xml smi
AddType application/smil+xml smil
AddType application/srgs gram
AddType application/srgs+xml grxml
AddType application/ssml+xml ssml
AddType application/vnd.3gpp.pic-bw-large plb
AddType application/vnd.3gpp.pic-bw-small psb
AddType application/vnd.3gpp.pic-bw-var pvb
AddType application/vnd.3m.post-it-notes pwn
AddType application/vnd.accpac.simply.aso aso
AddType application/vnd.accpac.simply.imp imp
AddType application/vnd.acucobol acu
AddType application/vnd.acucorp acutc
AddType application/vnd.acucorp atc
AddType application/vnd.adobe.xdp+xml xdp
AddType application/vnd.adobe.xfdf xfdf
AddType application/vnd.amiga.ami ami
AddType application/vnd.anser-web-certificate-issue-initiation cii
AddType application/vnd.anser-web-funds-transfer-initiation fti
AddType application/vnd.antix.game-component atx
AddType application/vnd.apple.installer+xml mpkg
AddType application/vnd.apple.installer+xml pkg
AddType application/vnd.audiograph aep
AddType application/vnd.blueice.multipass mpm
AddType application/vnd.bmi bmi
AddType application/vnd.businessobjects rep
AddType application/vnd.chemdraw+xml cdxml
AddType application/vnd.chipnuts.karaoke-mmd mmd
AddType application/vnd.cinderella cdy
AddType application/vnd.claymore cla
AddType application/vnd.clonk.c4group c4d
AddType application/vnd.clonk.c4group c4f
AddType application/vnd.clonk.c4group c4g
AddType application/vnd.clonk.c4group c4p
AddType application/vnd.clonk.c4group c4u
AddType application/vnd.commonspace csp
AddType application/vnd.commonspace cst
AddType application/vnd.contact.cmsg cdbcmsg
AddType application/vnd.cosmocaller cmc
AddType application/vnd.crick.clicker clkx
AddType application/vnd.crick.clicker.keyboard clkk
AddType application/vnd.crick.clicker.palette clkp
AddType application/vnd.crick.clicker.template clkt
AddType application/vnd.crick.clicker.wordbank clkw
AddType application/vnd.criticaltools.wbs+xml wbs
AddType application/vnd.ctc-posml pml
AddType application/vnd.cups-ppd ppd
AddType application/vnd.curl curl
AddType application/vnd.data-vision.rdz rdz
AddType application/vnd.denovo.fcselayout-link fe_launch
AddType application/vnd.dna dna
AddType application/vnd.dolby.mlp mlp
AddType application/vnd.dpgraph dpg
AddType application/vnd.dreamfactory dfac
AddType application/vnd.ecowin.chart mag
AddType application/vnd.enliven nml
AddType application/vnd.epson.esf esf
AddType application/vnd.epson.msf msf
AddType application/vnd.epson.quickanime qam
AddType application/vnd.epson.salt slt
AddType application/vnd.epson.ssf ssf
AddType application/vnd.eszigno3+xml es3 et3
AddType application/vnd.ezpix-album ez2
AddType application/vnd.ezpix-package ez3
AddType application/vnd.fdf fdf
AddType application/vnd.flographit gph
AddType application/vnd.fluxtime.clip ftc
AddType application/vnd.framemaker fm
AddType application/vnd.framemaker frame
AddType application/vnd.framemaker maker
AddType application/vnd.frogans.fnc fnc
AddType application/vnd.frogans.ltf ltf
AddType application/vnd.fsc.weblaunch fsc
AddType application/vnd.fujitsu.oasys oas
AddType application/vnd.fujitsu.oasys2 oa2
AddType application/vnd.fujitsu.oasys3 oa3
AddType application/vnd.fujitsu.oasysgp fg5
AddType application/vnd.fujitsu.oasysprs bh2
AddType application/vnd.fujixerox.ddd ddd
AddType application/vnd.fujixerox.docuworks xdw
AddType application/vnd.fujixerox.docuworks.binder xbd
AddType application/vnd.fuzzysheet fzs
AddType application/vnd.genomatix.tuxedo txd
AddType application/vnd.google-earth.kml+xml kml
AddType application/vnd.google-earth.kmz kmz
AddType application/vnd.grafeq gqf
AddType application/vnd.grafeq gqs
AddType application/vnd.groove-account gac
AddType application/vnd.groove-help ghf
AddType application/vnd.groove-identity-message gim
AddType application/vnd.groove-injector grv
AddType application/vnd.groove-tool-message gtm
AddType application/vnd.groove-tool-template tpl
AddType application/vnd.groove-vcard vcg
AddType application/vnd.handheld-entertainment+xml zmm
AddType application/vnd.hbci hbci
AddType application/vnd.hhe.lesson-player les
AddType application/vnd.hp-hpgl hpgl
AddType application/vnd.hp-hpid hpid
AddType application/vnd.hp-hps hps
AddType application/vnd.hp-jlyt jlt
AddType application/vnd.hp-pcl pcl
AddType application/vnd.hp-pclxl pclxl
AddType application/vnd.hzn-3d-crossword x3d
AddType application/vnd.ibm.minipay mpy
AddType application/vnd.ibm.modcap afp
AddType application/vnd.ibm.modcap list3820
AddType application/vnd.ibm.modcap listafp
AddType application/vnd.ibm.rights-management irm
AddType application/vnd.ibm.secure-container sc
AddType application/vnd.igloader igl
AddType application/vnd.immervision-ivp ivp
AddType application/vnd.immervision-ivu ivu
AddType application/vnd.intercon.formnet xpw
AddType application/vnd.intercon.formnet xpx
AddType application/vnd.intu.qbo qbo
AddType application/vnd.intu.qfx qfx
AddType application/vnd.ipunplugged.rcprofile rcprofile
AddType application/vnd.irepository.package+xml irp
AddType application/vnd.is-xpr xpr
AddType application/vnd.jam jam
AddType application/vnd.jcp.javame.midlet-rms rms
AddType application/vnd.jisp jisp
AddType application/vnd.kahootz ktr
AddType application/vnd.kahootz ktz
AddType application/vnd.kde.karbon karbon
AddType application/vnd.kde.kchart chrt
AddType application/vnd.kde.kformula kfo
AddType application/vnd.kde.kivio flw
AddType application/vnd.kde.kontour kon
AddType application/vnd.kde.kpresenter kpr
AddType application/vnd.kde.kpresenter kpt
AddType application/vnd.kde.kspread ksp
AddType application/vnd.kde.kword kwd
AddType application/vnd.kde.kword kwt
AddType application/vnd.kenameaapp htke
AddType application/vnd.kidspiration kia
AddType application/vnd.kinar kne
AddType application/vnd.kinar knp
AddType application/vnd.koan skd
AddType application/vnd.koan skm
AddType application/vnd.koan skp
AddType application/vnd.koan skt
AddType application/vnd.llamagraphics.life-balance.desktop lbd
AddType application/vnd.llamagraphics.life-balance.exchange+xml lbe
AddType application/vnd.lotus-1-2-3 123
AddType application/vnd.lotus-approach apr
AddType application/vnd.lotus-freelance pre
AddType application/vnd.lotus-notes nsf
AddType application/vnd.lotus-organizer org
AddType application/vnd.lotus-screencam scm
AddType application/vnd.lotus-wordpro lwp
AddType application/vnd.macports.portpkg portpkg
AddType application/vnd.mcd mcd
AddType application/vnd.medcalcdata mc1
AddType application/vnd.mediastation.cdkey cdkey
AddType application/vnd.mfer mwf
AddType application/vnd.mfmp mfm
AddType application/vnd.micrografx.flo flo
AddType application/vnd.micrografx.igx igx
AddType application/vnd.mif mif
AddType application/vnd.mobius.daf daf
AddType application/vnd.mobius.dis dis
AddType application/vnd.mobius.mbk mbk
AddType application/vnd.mobius.mqy mqy
AddType application/vnd.mobius.msl msl
AddType application/vnd.mobius.plc plc
AddType application/vnd.mobius.txf txf
AddType application/vnd.mophun.application mpn
AddType application/vnd.mophun.certificate mpc
AddType application/vnd.mozilla.xul+xml xul
AddType application/vnd.ms-artgalry cil
AddType application/vnd.ms-asf asf
AddType application/vnd.ms-cab-compressed cab
AddType application/vnd.ms-excel xla
AddType application/vnd.ms-excel xlc
AddType application/vnd.ms-excel xlm
AddType application/vnd.ms-excel xls
AddType application/vnd.ms-excel xlt
AddType application/vnd.ms-excel xlw
AddType application/vnd.ms-fontobject eot
AddType application/vnd.ms-htmlhelp chm
AddType application/vnd.ms-ims ims
AddType application/vnd.ms-lrm lrm
AddType application/vnd.ms-powerpoint pot
AddType application/vnd.ms-powerpoint pps
AddType application/vnd.ms-powerpoint ppt
AddType application/vnd.ms-project mpp
AddType application/vnd.ms-project mpt
AddType application/vnd.ms-works wcm
AddType application/vnd.ms-works wdb
AddType application/vnd.ms-works wks
AddType application/vnd.ms-works wps
AddType application/vnd.ms-wpl wpl
AddType application/vnd.ms-xpsdocument xps
AddType application/vnd.mseq mseq
AddType application/vnd.musician mus
AddType application/vnd.neurolanguage.nlu nlu
AddType application/vnd.noblenet-directory nnd
AddType application/vnd.noblenet-sealer nns
AddType application/vnd.noblenet-web nnw
AddType application/vnd.nokia.n-gage.data ngdat
AddType application/vnd.nokia.n-gage.symbian.install n-gage
AddType application/vnd.nokia.radio-preset rpst
AddType application/vnd.nokia.radio-presets rpss
AddType application/vnd.novadigm.edm edm
AddType application/vnd.novadigm.edx edx
AddType application/vnd.novadigm.ext ext
AddType application/vnd.oasis.opendocument.chart odc
AddType application/vnd.oasis.opendocument.chart-template otc
AddType application/vnd.oasis.opendocument.formula odf
AddType application/vnd.oasis.opendocument.formula-template otf
AddType application/vnd.oasis.opendocument.graphics odg
AddType application/vnd.oasis.opendocument.graphics-template otg
AddType application/vnd.oasis.opendocument.image odi
AddType application/vnd.oasis.opendocument.image-template oti
AddType application/vnd.oasis.opendocument.presentation odp
AddType application/vnd.oasis.opendocument.presentation-template otp
AddType application/vnd.oasis.opendocument.spreadsheet ods
AddType application/vnd.oasis.opendocument.spreadsheet-template ots
AddType application/vnd.oasis.opendocument.text odt
AddType application/vnd.oasis.opendocument.text-master otm
AddType application/vnd.oasis.opendocument.text-template ott
AddType application/vnd.oasis.opendocument.text-web oth
AddType application/vnd.olpc-sugar xo
AddType application/vnd.oma.dd2+xml dd2
AddType application/vnd.openofficeorg.extension oxt
AddType application/vnd.osgi.dp dp
AddType application/vnd.palm oprc
AddType application/vnd.palm pdb
AddType application/vnd.palm pqa
AddType application/vnd.palm prc
AddType application/vnd.pg.format str
AddType application/vnd.pg.osasli ei6
AddType application/vnd.picsel efif
AddType application/vnd.pocketlearn plf
AddType application/vnd.powerbuilder6 pbd
AddType application/vnd.previewsystems.box box
AddType application/vnd.proteus.magazine mgz
AddType application/vnd.publishare-delta-tree qps
AddType application/vnd.pvi.ptid1 ptid
AddType application/vnd.quark.quarkxpress qwd
AddType application/vnd.quark.quarkxpress qwt
AddType application/vnd.quark.quarkxpress qxb
AddType application/vnd.quark.quarkxpress qxd
AddType application/vnd.quark.quarkxpress qxl
AddType application/vnd.quark.quarkxpress qxt
AddType application/vnd.recordare.musicxml mxl
# AddType application/vnd.rn-realmedia rm
AddType application/vnd.seemail see
AddType application/vnd.sema sema
AddType application/vnd.semd semd
AddType application/vnd.semf semf
AddType application/vnd.shana.informed.formdata ifm
AddType application/vnd.shana.informed.formtemplate itp
AddType application/vnd.shana.informed.interchange iif
AddType application/vnd.shana.informed.package ipk
AddType application/vnd.simtech-mindmapper twd
AddType application/vnd.simtech-mindmapper twds
AddType application/vnd.smaf mmf
AddType application/vnd.solent.sdkm+xml sdkd
AddType application/vnd.solent.sdkm+xml sdkm
AddType application/vnd.spotfire.dxp dxp
AddType application/vnd.spotfire.sfs sfs
AddType application/vnd.sus-calendar sus
AddType application/vnd.sus-calendar susp
AddType application/vnd.svd svd
AddType application/vnd.syncml+xml xsm
AddType application/vnd.syncml.dm+wbxml bdm
AddType application/vnd.syncml.dm+xml xdm
AddType application/vnd.tao.intent-module-archive tao
AddType application/vnd.tmobile-livetv tmo
AddType application/vnd.trid.tpt tpt
AddType application/vnd.triscape.mxs mxs
AddType application/vnd.trueapp tra
AddType application/vnd.ufdl ufd
AddType application/vnd.ufdl ufdl
AddType application/vnd.uiq.theme utz
AddType application/vnd.umajin umj
AddType application/vnd.unity unityweb
AddType application/vnd.uoml+xml uoml
AddType application/vnd.vcx vcx
AddType application/vnd.visio vsd
AddType application/vnd.visio vss
AddType application/vnd.visio vst
AddType application/vnd.visio vsw
AddType application/vnd.visionary vis
AddType application/vnd.vsf vsf
AddType application/vnd.wap.wbxml wbxml
AddType application/vnd.wap.wmlc wmlc
AddType application/vnd.wap.wmlscriptc wmlsc
AddType application/vnd.webturbo wtb
AddType application/vnd.wordperfect wpd
AddType application/vnd.wqd wqd
AddType application/vnd.wt.stf stf
AddType application/vnd.xara xar
AddType application/vnd.xfdl xfdl
AddType application/vnd.yamaha.hv-dic hvd
AddType application/vnd.yamaha.hv-script hvs
AddType application/vnd.yamaha.hv-voice hvp
AddType application/vnd.yamaha.smaf-audio saf
AddType application/vnd.yamaha.smaf-phrase spf
AddType application/vnd.yellowriver-custom-menu cmp
AddType application/vnd.zzazz.deck+xml zaz
AddType application/voicexml+xml vxml
AddType application/winhlp hlp
AddType application/wsdl+xml wsdl
AddType application/wspolicy+xml wspolicy
AddType application/x-ace-compressed ace
AddType application/x-bcpio bcpio
AddType application/x-bittorrent torrent
AddType application/x-bzip bz
AddType application/x-bzip2 boz
AddType application/x-bzip2 bz2
AddType application/x-cdlink vcd
AddType application/x-chat chat
AddType application/x-chess-pgn pgn
AddType application/x-cpio cpio
AddType application/x-csh csh
AddType application/x-director dcr
AddType application/x-director dir
AddType application/x-director dxr
AddType application/x-director fgd
AddType application/x-dvi dvi
AddType application/x-futuresplash spl
AddType application/x-gtar gtar
AddType application/x-hdf hdf
AddType application/x-httpd-php php
AddType application/x-httpd-php-source phps
AddType application/x-httpd-php3 php3
AddType application/x-java-jnlp-file jnlp
AddType application/x-latex latex
AddType application/x-ms-wmd wmd
AddType application/x-ms-wmz wmz
AddType application/x-msaccess mdb
AddType application/x-msbinder obd
AddType application/x-mscardfile crd
AddType application/x-msclip clp
AddType application/x-msdownload bat
AddType application/x-msdownload com
AddType application/x-msdownload dll
AddType application/x-msdownload exe
AddType application/x-msdownload msi
AddType application/x-msmediaview m13
AddType application/x-msmediaview m14
AddType application/x-msmediaview mvb
AddType application/x-msmetafile wmf
AddType application/x-msmoney mny
AddType application/x-mspublisher pub
AddType application/x-msschedule scd
AddType application/x-msterminal trm
AddType application/x-mswrite wri
AddType application/x-netcdf cdf
AddType application/x-netcdf nc
AddType application/x-pkcs12 p12
AddType application/x-pkcs12 pfx
AddType application/x-pkcs7-certificates p7b
AddType application/x-pkcs7-certificates spc
AddType application/x-pkcs7-certreqresp p7r
AddType application/x-quicktimeplayer qtl
AddType application/x-rar-compressed rar
AddType application/x-sh sh
AddType application/x-shar shar
AddType application/x-shockwave-flash swf
AddType application/x-stuffit sit
AddType application/x-stuffitx sitx
AddType application/x-sv4cpio sv4cpio
AddType application/x-sv4crc sv4crc
AddType application/x-tar tar
AddType application/x-tar tgz
AddType application/x-tcl tcl
AddType application/x-tex tex
AddType application/x-texinfo texi
AddType application/x-texinfo texinfo
AddType application/x-ustar ustar
AddType application/x-wais-source src
AddType application/x-x509-ca-cert crt
AddType application/x-x509-ca-cert der
AddType application/xenc+xml xenc
AddType application/xhtml+xml xht
AddType application/xhtml+xml xhtm
AddType application/xhtml+xml xhtml
AddType application/xml xml
AddType application/xml xsl
AddType application/xml-dtd dtd
AddType application/xop+xml xop
AddType application/xslt+xml xslt
AddType application/xspf+xml xspf
AddType application/xv+xml mxml
AddType application/xv+xml xhvml
AddType application/xv+xml xvm
AddType application/xv+xml xvml
AddType application/zip zip
AddType audio/basic au
AddType audio/basic snd
AddType audio/midi kar
AddType audio/midi mid
AddType audio/midi midi
AddType audio/midi rmi
AddType audio/mp4 mp4a
AddType audio/mp4a-latm m4a
AddType audio/mp4a-latm m4p
AddType audio/mpeg m2a
AddType audio/mpeg m3a
AddType audio/mpeg mp2
AddType audio/mpeg mp2a
AddType audio/mpeg mp3
AddType audio/mpeg mpga
AddType audio/vnd.digital-winds eol
AddType audio/vnd.lucent.voice lvp
AddType audio/vnd.nuera.ecelp4800 ecelp4800
AddType audio/vnd.nuera.ecelp7470 ecelp7470
AddType audio/vnd.nuera.ecelp9600 ecelp9600
AddType audio/wav wav
AddType audio/x-aiff aif
AddType audio/x-aiff aifc
AddType audio/x-aiff aiff
AddType audio/x-m4a m4a
AddType audio/x-mpegurl m3u
AddType audio/x-ms-wax wax
AddType audio/x-ms-wma wma
AddType audio/x-pn-realaudio ra
AddType audio/x-pn-realaudio ram
AddType audio/x-pn-realaudio rm
AddType audio/x-pn-realaudio-plugin rmp
AddType audio/x-scpls pls
AddType audio/x-wav wav
AddType chemical/x-cdx cdx
AddType chemical/x-cif cif
AddType chemical/x-cmdf cmdf
AddType chemical/x-cml cml
AddType chemical/x-csml csml
AddType chemical/x-pdb pdb
AddType chemical/x-xyz xyz
AddType image/bmp bmp
AddType image/cgm cgm
AddType image/g3fax g3
AddType image/gif gif
AddType image/ief ief
AddType image/jp2 jp2
AddType image/jpeg jpe
AddType image/jpeg jpeg
AddType image/jpeg jpg
AddType image/pict pct
AddType image/pict pic
AddType image/pict pict
AddType image/png png
AddType image/prs.btif btif
AddType image/svg+xml svg
AddType image/svg+xml svgz
AddType image/tiff tif
AddType image/tiff tiff
AddType image/vnd.adobe.photoshop psd
AddType image/vnd.djvu djv
AddType image/vnd.djvu djvu
AddType image/vnd.dwg dwg
AddType image/vnd.dxf dxf
AddType image/vnd.fastbidsheet fbs
AddType image/vnd.fpx fpx
AddType image/vnd.fst fst
AddType image/vnd.fujixerox.edmics-mmr mmr
AddType image/vnd.fujixerox.edmics-rlc rlc
AddType image/vnd.microsoft.icon ico
AddType image/vnd.ms-modi mdi
AddType image/vnd.net-fpx npx
AddType image/vnd.wap.wbmp wbmp
AddType image/vnd.xiff xif
AddType image/x-cmu-raster ras
AddType image/x-cmx cmx
AddType image/x-macpaint mac
AddType image/x-macpaint pnt
AddType image/x-macpaint pntg
AddType image/x-pcx pcx
AddType image/x-pict pct
AddType image/x-pict pic
AddType image/x-portable-anymap pnm
AddType image/x-portable-bitmap pbm
AddType image/x-portable-graymap pgm
AddType image/x-portable-pixmap ppm
AddType image/x-quicktime qti
AddType image/x-quicktime qtif
AddType image/x-rgb rgb
AddType image/x-xbitmap xbm
AddType image/x-xpixmap xpm
AddType image/x-xwindowdump xwd
AddType message/rfc822 eml
AddType message/rfc822 mime
AddType model/iges iges
AddType model/iges igs
AddType model/mesh mesh
AddType model/mesh msh
AddType model/mesh silo
AddType model/vnd.dwf dwf
AddType model/vnd.gdl gdl
AddType model/vnd.gtw gtw
AddType model/vnd.mts mts
AddType model/vnd.vtu vtu
AddType model/vrml vrml
AddType model/vrml wrl
AddType text/calendar ics
AddType text/calendar ifb
AddType text/css css
AddType text/csv csv
AddType text/html htm
AddType text/html html
AddType text/html shtml
AddType text/plain asc
AddType text/plain conf
AddType text/plain def
AddType text/plain in
AddType text/plain list
AddType text/plain log
AddType text/plain text
AddType text/plain txt
AddType text/prs.lines.tag dsc
AddType text/richtext rtx
AddType text/rtf rtf
AddType text/sgml sgm
AddType text/sgml sgml
AddType text/tab-separated-values tsv
AddType text/troff man
AddType text/troff me
AddType text/troff ms
AddType text/troff roff
AddType text/troff t
AddType text/troff tr
AddType text/uri-list uri
AddType text/uri-list uris
AddType text/uri-list urls
AddType text/vnd.fly fly
AddType text/vnd.fmi.flexstor flx
AddType text/vnd.in3d.3dml 3dml
AddType text/vnd.in3d.spot spot
AddType text/vnd.sun.j2me.app-descriptor jad
AddType text/vnd.wap.wml wml
AddType text/vnd.wap.wmlscript wmls
AddType text/x-asm s
AddType text/x-asm sm
AddType text/x-c c
AddType text/x-c cc
AddType text/x-c cpp
AddType text/x-c cxx
AddType text/x-c dic
AddType text/x-c h
AddType text/x-c hh
AddType text/x-fortran f
AddType text/x-fortran f77
AddType text/x-fortran f90
AddType text/x-fortran for
AddType text/x-java-source java
AddType text/x-pascal p
AddType text/x-pascal pas
AddType text/x-setext etx
AddType text/x-uuencode uu
AddType text/x-vcalendar vcs
AddType text/x-vcard vcf
AddType video/3gp2 3gp2
AddType video/3gpp 3gp
AddType video/3gpp 3gpp
AddType video/3gpp2 3g2
AddType video/h261 h261
AddType video/h263 h263
AddType video/h264 h264
AddType video/jpeg jpgv
AddType video/jpm jpgm
AddType video/jpm jpm
AddType video/mj2 mj2
AddType video/mj2 mjp2
AddType video/mp4 m4v
AddType video/mp4 mp4
AddType video/mp4 mp4v
AddType video/mp4 mpg4
AddType video/mpeg m1v
AddType video/mpeg m2v
AddType video/mpeg mpe
AddType video/mpeg mpeg
AddType video/mpeg mpg
AddType video/quicktime mov
AddType video/quicktime qt
AddType video/vnd.fvt fvt
AddType video/vnd.mpegurl m4u
AddType video/vnd.mpegurl mxu
AddType video/vnd.vivo viv
AddType video/x-dv dif
AddType video/x-dv dv
AddType video/x-fli fli
AddType video/x-ms-asf asf
AddType video/x-ms-asf asx
AddType video/x-ms-wm wm
AddType video/x-ms-wmv wmv
AddType video/x-ms-wmx wmx
AddType video/x-ms-wvx wvx
AddType video/x-msvideo avi
AddType video/x-sgi-movie movie
AddType x-conference/x-cooltalk ice
# Settings for hosting different languages.
# Required modules: mod_mime, mod_negotiation
# DefaultLanguage and AddLanguage allows you to specify the language of
# a document. You can then use content negotiation to give a browser a
# file in a language the user can understand.
# Specify a default language. This means that all data
# going out without a specific language tag (see below) will
# be marked with this one. You probably do NOT want to set
# this unless you are sure it is correct for all cases.
# * It is generally better to not mark a page as
# * being a certain language than marking it with the wrong
# * language!
# DefaultLanguage nl
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
# Note 2: The example entries below illustrate that in some cases
# the two character 'Language' abbreviation is not identical to
# the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. There is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
# English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
# Norwegian (no) - Polish (pl) - Portugese (pt)
# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
# Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
AddLanguage ca .ca
AddLanguage cs .cz .cs
AddLanguage da .dk
AddLanguage de .de
AddLanguage el .el
AddLanguage en .en
AddLanguage eo .eo
AddLanguage es .es
AddLanguage et .et
AddLanguage fr .fr
AddLanguage he .he
AddLanguage hr .hr
AddLanguage it .it
AddLanguage ja .ja
AddLanguage ko .ko
AddLanguage ltz .ltz
AddLanguage nl .nl
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddLanguage pt .pt
AddLanguage pt-BR .pt-br
AddLanguage ru .ru
AddLanguage sv .sv
AddLanguage zh-CN .zh-cn
AddLanguage zh-TW .zh-tw
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW
# ForceLanguagePriority allows you to serve a result page rather than
# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
# [in case no accepted languages matched the available variants]
ForceLanguagePriority Prefer Fallback
# Commonly used filename extensions to character sets. You probably
# want to avoid clashes with the language extensions, unless you
# are good at carefully testing your setup after each change.
# See http://www.iana.org/assignments/character-sets for the
# official list of charset names and their respective RFCs.
AddCharset us-ascii.ascii .us-ascii
AddCharset ISO-8859-1 .iso8859-1 .latin1
AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen
AddCharset ISO-8859-3 .iso8859-3 .latin3
AddCharset ISO-8859-4 .iso8859-4 .latin4
AddCharset ISO-8859-5 .iso8859-5 .cyr .iso-ru
AddCharset ISO-8859-6 .iso8859-6 .arb .arabic
AddCharset ISO-8859-7 .iso8859-7 .grk .greek
AddCharset ISO-8859-8 .iso8859-8 .heb .hebrew
AddCharset ISO-8859-9 .iso8859-9 .latin5 .trk
AddCharset ISO-8859-10 .iso8859-10 .latin6
AddCharset ISO-8859-13 .iso8859-13
AddCharset ISO-8859-14 .iso8859-14 .latin8
AddCharset ISO-8859-15 .iso8859-15 .latin9
AddCharset ISO-8859-16 .iso8859-16 .latin10
AddCharset ISO-2022-JP .iso2022-jp .jis
AddCharset ISO-2022-KR .iso2022-kr .kis
AddCharset ISO-2022-CN .iso2022-cn .cis
AddCharset Big5.Big5 .big5 .b5
AddCharset cn-Big5 .cn-big5
# For russian, more than one charset is used (depends on client, mostly):
AddCharset WINDOWS-1251 .cp-1251 .win-1251
AddCharset CP866 .cp866
AddCharset KOI8 .koi8
AddCharset KOI8-E .koi8-e
AddCharset KOI8-r .koi8-r .koi8-ru
AddCharset KOI8-U .koi8-u
AddCharset KOI8-ru .koi8-uk .ua
AddCharset ISO-10646-UCS-2 .ucs2
AddCharset ISO-10646-UCS-4 .ucs4
AddCharset UTF-7 .utf7
AddCharset UTF-8 .utf8
AddCharset UTF-16 .utf16
AddCharset UTF-16BE .utf16be
AddCharset UTF-16LE .utf16le
AddCharset UTF-32 .utf32
AddCharset UTF-32BE .utf32be
AddCharset UTF-32LE .utf32le
AddCharset euc-cn .euc-cn
AddCharset euc-gb .euc-gb
AddCharset euc-jp .euc-jp
AddCharset euc-kr .euc-kr
#Not sure how euc-tw got in - IANA doesn't list it???
AddCharset EUC-TW .euc-tw
AddCharset gb2312 .gb2312 .gb
AddCharset iso-10646-ucs-2 .ucs-2 .iso-10646-ucs-2
AddCharset iso-10646-ucs-4 .ucs-4 .iso-10646-ucs-4
AddCharset shift_jis .shift_jis .sjis
</IfModule>
## The modmimemagic module allows the server to use various hints from the
## contents of the file itself to determine its type. The MIMEMagicFile
## directive tells the module where the hint definitions are located.
<IfModule modmimemagic.c>
MIMEMagicFile /etc/apache2/magic
</IfModule>
## HostnameLookups: Log the names of clients or just their IP addresses
## e.g., www.apache.org (on) or 204.62.129.132 (off).
## The default is off because it'd be overall better for the net if people
## had to knowingly turn this feature on, since enabling it means that
## each client request will result in AT LEAST one lookup request to the
## nameserver.
HostnameLookups Off
## LogLevel: Control the number of messages logged to the error_log.
## Possible values include: debug, info, notice, warn, error, crit,
## alert, emerg.
LogLevel warn
<IfModule modlogconfig.c>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
<IfModule mod_logio.c>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you do
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and not in this file.
#### For Mac OS X Server: Server Admin manages CustomLog directives
#### on a virtual host basis.
#CustomLog /var/log/apache2/access_log common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog /var/log/apache2/access_log combined
</IfModule>
## Optionally add a line containing the server version and virtual host
## name to server-generated pages (error documents, FTP directory listings,
## mod_status and mod_info output etc., but not CGI generated documents).
## Set to "EMail" to also include a mailto: link to the ServerAdmin.
## Set to one of: On | Off | EMail
ServerSignature On
UseCanonicalName Off
## Aliases: Add here as many aliases as you need (with no limit). The format is
## Alias fakename realname
<IfModule mod_alias.c>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAliasMatch ^/cgi-bin/((?!(?i:webobjects)).*$) "/Library/WebServer/CGI-Executables/$1"
#### For Mac OS X Server: Uncomment this line to enable web-based
#### configuration of mailman:
#Include /etc/apache2/httpd_mailman.conf
<IfModule mod_setenvif.c>
<IfModule mod_negotiation.c>
# Allow convenient access to Apache manual
AliasMatch ^/manual(?:/(?:de|en|es|fr|ja|ko|pt-br|ru))?(/.*)?$ "/Library/WebServer/share/httpd/manual$1"
<Directory "/Library/WebServer/share/httpd/manual">
Options Indexes
AllowOverride None
Order allow,deny
Allow from all
<Files *.html>
SetHandler type-map
</Files>
SetEnvIf Request_URI ^/manual/(de|en|es|fr|ja|ko|pt-br|ru)/ prefer-language=$1
RedirectMatch 301 ^/manual(?:/(de|en|es|fr|ja|ko|pt-br|ru)){2,}(/.*)?$ /manual/$1$2
LanguagePriority en de es fr ja ko pt-br ru ForceLanguagePriority Prefer Fallback
</Directory>
</IfModule>
</IfModule>
</IfModule>
## Directives controlling the display of server-generated directory listings.
#### For Mac OS X Server: Note that indexing is further controlled
#### by the Server Admin application, which adds "Options +/-Indexes
#### in the virtual host scope.
<IfModule mod_autoindex.c>
## FancyIndexing is whether you want fancy directory indexing or standard
IndexOptions FancyIndexing
## AddIcon* directives tell the server which icon to show for different
## files or filename extensions. These are only displayed for
## FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
## DefaultIcon is which icon to show for files which do not have an icon
## explicitly set.
DefaultIcon /icons/unknown.gif
## AddDescription allows you to place a short description after a file in
## server-generated indexes. These are only displayed for FancyIndexed
## directories.
## Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
#AddDescription "Mac OS Disk Image file" .dmg
## ReadmeName is the name of the README file the server will look for by
## default, and append to directory listings.
## HeaderName is the name of a file which should be prepended to
## directory indexes.
## If MultiViews are amongst the Options in effect, the server will
## first look for name.html and include it if found. If name.html
## doesn't exist, the server will then look for name.txt and include
## it as plaintext if found.
ReadmeName README
HeaderName HEADER
## IndexIgnore is a set of filenames which directory indexing should ignore
## and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
</IfModule>
## MetaDir: specifies the name of the directory in which Apache can find
## meta information files. These files contain additional HTTP headers
## to include when sending the document
#MetaDir .web
## MetaSuffix: specifies the file name suffix for the file containing the
## meta information.
#MetaSuffix .meta
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# The configuration below implements multi-language error documents through
# content-negotiation, and via the default Alias for /error in the vhost config file.
<Directory "/usr/share/httpd/error">
AllowOverride None
Options IncludesNoExec
AddOutputFilter Includes html
AddHandler type-map var
Order allow,deny
Allow from all
LanguagePriority en cs de es fr it ja ko nl pl pt-br ro sv tr
ForceLanguagePriority Prefer Fallback
</Directory>
ErrorDocument 400 /error/HTTPBADREQUEST.html.var
ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
ErrorDocument 404 /error/HTTPNOTFOUND.html.var
ErrorDocument 405 /error/HTTPMETHOD_NOTALLOWED.html.var
ErrorDocument 408 /error/HTTPREQUEST_TIMEOUT.html.var
ErrorDocument 410 /error/HTTP_GONE.html.var
ErrorDocument 411 /error/HTTPLENGTHREQUIRED.html.var
ErrorDocument 412 /error/HTTPPRECONDITIONFAILED.html.var
ErrorDocument 413 /error/HTTPREQUEST_ENTITY_TOOLARGE.html.var
ErrorDocument 414 /error/HTTPREQUEST_URI_TOOLARGE.html.var
ErrorDocument 415 /error/HTTPUNSUPPORTED_MEDIATYPE.html.var
ErrorDocument 500 /error/HTTPINTERNAL_SERVERERROR.html.var
ErrorDocument 501 /error/HTTPNOTIMPLEMENTED.html.var
ErrorDocument 502 /error/HTTPBADGATEWAY.html.var
ErrorDocument 503 /error/HTTPSERVICEUNAVAILABLE.html.var
ErrorDocument 506 /error/HTTPVARIANT_ALSOVARIES.html.var
# Allow server status reports generated by mod_status,
# with the URL of http://servername/server-status
<IfModule mod_status.c>
<Location /server-status>
SetHandler server-status
Order deny,allow
Deny from all
Allow from 127.0.0.1
</Location>
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
ExtendedStatus On
</IfModule>
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
#<IfModule mod_info.c>
# <Location /server-info>
# SetHandler server-info
# Order deny,allow
# Deny from all
# Allow from .your-domain.com
# </Location>
#</IfModule>
## Proxy Server directives.
<IfModule mod_proxy.c>
ProxyRequests Off
<IfModule moddiskcache.c>
CacheEnable disk /
CacheRoot "/var/run/proxy"
</IfModule>
</IfModule>
## SSL stuff
<IfModule mod_ssl.c>
SetEnvIf User-Agent ".MSIE." nokeepalive ssl-unclean-shutdown
SSLPassPhraseDialog exec:/etc/apache2/getsslpassphrase
SSLSessionCache shmcb:/var/run/ssl_scache(512000)
SSLSessionCacheTimeout 300
SSLMutex file:/var/log/apache2/ssl_mutex
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
AddType application/x-x509-ca-cert crt
AddType application/x-pkcs7-crl crl
</IfModule>
<IfModule mod_jk.c>
JkWorkersFile /etc/apache2/workers.properties
JkLogFile /var/log/apache2/mod_jk.log
JkLogLevel error
JkMount /*.jsp JBoss1
JkMount /servlet/* JBoss1
JkMount /examples/* JBoss1
</IfModule>
## The default server is used for status on a special port
#ServerName www.example.com
Listen 127.0.0.1:9010
DocumentRoot "/var/empty"
ErrorLog "/var/log/apache2/error_log"
<Directory /var/empty>
Order Deny,Allow
Deny from All
</Directory>
<IfModule modspotlightapple2.c>
Spotlight On
</IfModule>
<IfModule modauth_digestapple.c>
BrowserMatch "MSIE" AuthDigestEnableQueryStringHack=On
</IfModule>
<IfModule mod_rewrite.c>
RewriteEngine On
RewriteCond %{REQUEST_METHOD} ^TRACE
RewriteRule .* - [F]
</IfModule>
<IfModule mod_headers.c>
Header add MS-Author-Via "DAV"
RequestHeader set XFORWARDEDPROTO 'https' env=https
</IfModule>
<IfModule mod_encoding.c>
EncodingEngine on
NormalizeUsername on
DefaultClientEncoding UTF-8
# Windows XP?
AddClientEncoding "Microsoft-WebDAV-MiniRedir/" MSUTF-8
# Windows 2K SP2 with .NET
AddClientEncoding "(Microsoft .* DAV\$)" MSUTF-8
# Windows 2K SP2/Windows XP
AddClientEncoding "(Microsoft .* DAV 1.1)" CP932
# Windows XP?
AddClientEncoding "Microsoft-WebDAV*" CP932
# RealPlayer
AddClientEncoding "RMA/*" CP932
# MacOS X webdavfs
AddClientEncoding "WebDAVFS" UTF-8
# cadaver
AddClientEncoding "cadaver/" EUC-JP
</IfModule>
RLimitNPROC max max
ExtendedStatus On
Timeout 300
KeepAlive On
MaxKeepAliveRequests 500
KeepAliveTimeout 15
# As of Mac OS X Server 10.5, the compiled-in server limit is 2048
ServerLimit 2048
# Server Admin manages ListenBackLog as a function of MaxClients: min(511, MaxClients/2)
MaxClients 1024
ListenBackLog 512
# Including WebObjects Configs
Include /System/Library/WebObjects/Adaptors/Apache2.2/apache.conf
#### The following Include directive is essential for the virtual hosts to be usable.
Include "/etc/apache2/sites/*.conf"
========HTTPD.CONF==========I am modifying the correct httpd.conf file on the server, it just doesn't seem to work. - If I put the rewrite rules in the <Directory /> the rewrite works but it adds /Library/WebServer/Documents to the URL.
I also tried putting the rewrite rules in <IfModule mod_rewrite.c> but that did not work either.
mod_rewrite is enabled and running on the server.
I will post the rewrite rules again in the code brackets. Sorry for the long post. - If some one can try them out on their Leopard Server to see if they can get them to work, it would be much appreciated. Again, these work on my Leopard Client but I can't get them to work on Server.
-- The httpd.conf file posted above is just the default conf file found in /private/etc/apache2/
<code>
RewriteEngine On
Options +FollowSymLinks
RewriteRule ^(.+)/$ http://%{HTTP_HOST}$1 [R=301, L]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.php(.*)\ HTTP
RewriteRule (.+)\.php(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.asp(.*)\ HTTP
RewriteRule (.+)\.asp(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.aspx(.*)\ HTTP
RewriteRule (.+)\.aspx(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.htm.(.)\ HTTP
RewriteRule (.+)\.htm.(.)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.cfm(.*)\ HTTP
RewriteRule (.+)\.cfm(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.bak(.*)\ HTTP
RewriteRule (.+)\.bak(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.inc(.*)\ HTTP
RewriteRule (.+)\.inc(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\..(.)\ HTTP
RewriteRule (.+)\..(.)$ $1$2 [R, L]]
<code> -
Performance of query in report..
Hi All,
We have the below SQL which is taking 6-8 hrs to execute. Of which 'analysis_results_details' is huge table with 329 million records, its "IOT - TOP" [index oraganised] table.
Can you please suggest some idea how to improve the performance of the query... Apologies if the format is correct tried my best
DB details :- 10g (10.1.0.5.0) - 64 bit.
SELECT CASE
WHEN UPPER (a.NAME) LIKE 'PCSUM%UK%RUNOFF%'
THEN 'UK/Ireland'
ELSE ctr.region
END AS region_name,
t.reinsurance_treatment_desc AS reinsurance_treatment,
CASE
WHEN UPPER (a.NAME) LIKE 'PCSUM%UK%RUNOFF%'
THEN 'UK Runoff'
ELSE rlc.country_code
END AS country_code,
ars.currency_code, rln.management_line_of_business AS aog_line,
rln.reserving_class, rln.reserving_line, rln.reserving_line_id,
CASE
WHEN UPPER (a.NAME) NOT LIKE 'PCSUMM%'
THEN ''
ELSE CASE
WHEN UPPER (a.NAME) LIKE 'PCSUMM1 %'
THEN 'Attritional'
WHEN UPPER (a.NAME) LIKE 'PCSUMM2 %'
THEN 'Large Loss'
WHEN UPPER (a.NAME) LIKE 'PCSUMM4 %'
THEN 'Total'
ELSE 'Cat'
END
END AS claim_type,
CASE
WHEN MOD (ard.exposure_period, 100) IN (1, 2, 3)
THEN TO_DATE
(TO_CHAR (TRUNC (ard.exposure_period / 100)) || '0101',
'yyyymmdd'
WHEN MOD (ard.exposure_period, 100) IN (4, 5, 6)
THEN TO_DATE ( TO_CHAR (TRUNC (ard.exposure_period / 100))
|| '0401',
'yyyymmdd'
WHEN MOD (ard.exposure_period, 100) IN (7, 8, 9)
THEN TO_DATE ( TO_CHAR (TRUNC (ard.exposure_period / 100))
|| '0701',
'yyyymmdd'
WHEN MOD (ard.exposure_period, 100) IN (10, 11, 12)
THEN TO_DATE ( TO_CHAR (TRUNC (ard.exposure_period / 100))
|| '1001',
'yyyymmdd'
END AS origin_date,
CASE
WHEN MOD (ard.evaluation_period, 100) IN
(1, 2, 3)
THEN TO_DATE
(TO_CHAR (TRUNC (ard.evaluation_period / 100)) || '0331',
'yyyymmdd'
WHEN MOD (ard.evaluation_period, 100) IN (4, 5, 6)
THEN TO_DATE ( TO_CHAR (TRUNC (ard.evaluation_period / 100))
|| '0630',
'yyyymmdd'
WHEN MOD (ard.evaluation_period, 100) IN (7, 8, 9)
THEN TO_DATE ( TO_CHAR (TRUNC (ard.evaluation_period / 100))
|| '0930',
'yyyymmdd'
WHEN MOD (ard.evaluation_period, 100) IN (10, 11, 12)
THEN TO_DATE ( TO_CHAR (TRUNC (ard.evaluation_period / 100))
|| '1231',
'yyyymmdd'
END AS development_date,
SUM (DECODE (ars.data_type_id, 1, NVL (ard.VALUE, 0), 0)
) AS earned_premium,
SUM (DECODE (ars.data_type_id, 12, NVL (ard.VALUE, 0), 0)
) AS paid_losses_and_alae,
SUM (DECODE (ars.data_type_id, 27, NVL (ard.VALUE, 0), 0)
) AS total_incurred_losses_inc_alae,
SUM (DECODE (ars.data_type_id, 6, NVL (ard.VALUE, 0), 0)
) AS paid_loss_total,
SUM (DECODE (ars.data_type_id, 9, NVL (ard.VALUE, 0), 0)
) AS alae_total,
SUM (DECODE (ars.data_type_id, 13, NVL (ard.VALUE, 0), 0)
) AS case_os_total,
SUM (DECODE (ars.data_type_id, 3, NVL (ard.VALUE, 0), 0)
) AS written_premium,
SUM (DECODE (ars.data_type_id, 33, NVL (ard.VALUE, 0), 0)
) AS total_claim_counts,
SUM (DECODE (ars.data_type_id, 31, NVL (ard.VALUE, 0), 0)
) AS open_claim_counts,
SUM (DECODE (ars.data_type_id, 32, NVL (ard.VALUE, 0), 0)
) AS closed_claim_counts,
SUM (DECODE (ars.data_type_id, 21, NVL (ard.VALUE, 0), 0)
) AS total_case_inc_loss,
SYSDATE AS export_date
FROM res_line_country rlc,
res_line_names rln,
risk_history.analysis_results_criteria arc,
(SELECT al.analysis_id,
MAX (al.lob_type_id) AS lob_type_id
FROM analysis_lobs al
GROUP BY analysis_id) al_types,
analyses a,
treatments t,
risk_history.analysis_lobs al,
analysis_results_summary ars,
analysis_results_details ard,
countries_to_regions ctr,
--Created Seperate Table to materialize the inline view - VM
country_to_bu_map ctbm
WHERE rlc.lob_value = rln.lob_value
AND rlc.lob_value = arc.lob_value
AND al_types.lob_type_id = rln.lob_type_id
AND a.analysis_id = al_types.analysis_id
AND a.analysis_id = arc.analysis_id
AND a.analysis_id = t.analysis_id
AND al.analysis_id = arc.analysis_id
AND arc.lob_value = al.lob_value
AND arc.analysis_criteria_id = ars.analysis_criteria_id
AND ars.analysis_results_id = ard.analysis_results_id
AND ctr.country_code = rlc.country_code
AND ctbm.business_unit = arc.business_unit
AND rlc.country_code = ctbm.country_code
AND a.run_frequency !=2
AND ars.is_non_zero_triangle = 'Y'
AND ars.data_type_id IN (1, 12, 27, 6, 9, 13, 3, 33, 31, 32, 21)
AND NOT UPPER (a.NAME) LIKE 'PCSUMM88%'
AND arc.lob_value NOT IN ('ALL', 'SEL') -- get data only for the actual reserving lines
AND al_types.lob_type_id IN (2, 4)
AND arc.management_unit != 'SEL'
AND arc.business_unit NOT IN ('ALL', 'SEL')
AND arc.rcc = 'ALL'
GROUP BY CASE
WHEN UPPER (a.NAME) LIKE 'PCSUM%UK%RUNOFF%'
THEN 'UK/Ireland'
ELSE ctr.region
END,
t.reinsurance_treatment_desc,
CASE
WHEN UPPER (a.NAME) LIKE 'PCSUM%UK%RUNOFF%'
THEN 'UK Runoff'
ELSE rlc.country_code
END,
ars.currency_code,
rln.management_line_of_business,
rln.reserving_class,
rln.reserving_line,
rln.reserving_line_id,
CASE
WHEN UPPER (a.NAME) NOT LIKE 'PCSUMM%'
THEN ''
ELSE CASE
WHEN UPPER (a.NAME) LIKE 'PCSUMM1 %'
THEN 'Attritional'
WHEN UPPER (a.NAME) LIKE 'PCSUMM2 %'
THEN 'Large Loss'
WHEN UPPER (a.NAME) LIKE 'PCSUMM4 %'
THEN 'Total'
ELSE 'Cat'
END
END,
CASE
WHEN MOD (ard.exposure_period, 100) IN (1, 2, 3)
THEN TO_DATE ( TO_CHAR (TRUNC (ard.exposure_period / 100))
|| '0101',
'yyyymmdd'
WHEN MOD (ard.exposure_period, 100) IN (4, 5, 6)
THEN TO_DATE ( TO_CHAR (TRUNC (ard.exposure_period / 100))
|| '0401',
'yyyymmdd'
WHEN MOD (ard.exposure_period, 100) IN (7, 8, 9)
THEN TO_DATE ( TO_CHAR (TRUNC (ard.exposure_period / 100))
|| '0701',
'yyyymmdd'
WHEN MOD (ard.exposure_period, 100) IN (10, 11, 12)
THEN TO_DATE ( TO_CHAR (TRUNC (ard.exposure_period / 100))
|| '1001',
'yyyymmdd'
END,
CASE
WHEN MOD (ard.evaluation_period, 100) IN (1, 2, 3)
THEN TO_DATE ( TO_CHAR (TRUNC (ard.evaluation_period / 100))
|| '0331',
'yyyymmdd'
WHEN MOD (ard.evaluation_period, 100) IN (4, 5, 6)
THEN TO_DATE ( TO_CHAR (TRUNC (ard.evaluation_period / 100))
|| '0630',
'yyyymmdd'
WHEN MOD (ard.evaluation_period, 100) IN (7, 8, 9)
THEN TO_DATE ( TO_CHAR (TRUNC (ard.evaluation_period / 100))
|| '0930',
'yyyymmdd'
WHEN MOD (ard.evaluation_period, 100) IN (10, 11, 12)
THEN TO_DATE ( TO_CHAR (TRUNC (ard.evaluation_period / 100))
|| '1231',
'yyyymmdd') END,SYSDATE
HAVING ( SUM (DECODE (ars.data_type_id, 1, NVL (ard.VALUE, 0), 0)) <> 0
OR SUM (DECODE (ars.data_type_id, 12, NVL (ard.VALUE, 0), 0)) <>0
OR SUM (DECODE (ars.data_type_id, 27, NVL (ard.VALUE, 0), 0)) <>0
OR SUM (DECODE (ars.data_type_id, 6, NVL (ard.VALUE, 0), 0)) <> 0
OR SUM (DECODE (ars.data_type_id, 9, NVL (ard.VALUE, 0), 0)) <> 0
OR SUM (DECODE (ars.data_type_id, 13, NVL (ard.VALUE, 0), 0)) <> 0
OR SUM (DECODE (ars.data_type_id, 3, NVL (ard.VALUE, 0), 0)) <>0
OR SUM (DECODE (ars.data_type_id, 33, NVL (ard.VALUE, 0), 0)) <>0
OR SUM (DECODE (ars.data_type_id, 31, NVL (ard.VALUE, 0), 0)) <>0
OR SUM (DECODE (ars.data_type_id, 32, NVL (ard.VALUE, 0), 0)) <>0
OR SUM (DECODE (ars.data_type_id, 21, NVL (ard.VALUE, 0), 0)) <> 0 )
Below is the EXPLAIN PLAN for it
PLAN_TABLE_OUTPUT
Plan hash value: 771711397
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 256 | 356 (5)| 00:00:03 |
|* 1 | FILTER | | | | | |
| 2 | SORT GROUP BY | | 1 | 256 | 356 (5)| 00:00:03 |
| 3 | NESTED LOOPS | | 1 | 256 | 355 (4)| 00:00:03 |
| 4 | NESTED LOOPS | | 1 | 234 | 355 (4)| 00:00:03 |
| 5 | NESTED LOOPS | | 1 | 217 | 355 (4)| 00:00:03 |
| 6 | NESTED LOOPS | | 2 | 318 | 355 (5)| 00:00:03 |
| 7 | NESTED LOOPS | | 1 | 139 | 142 (10)| 00:00:02 |
| 8 | NESTED LOOPS | | 1 | 131 | 142 (10)| 00:00:02 |
| 9 | NESTED LOOPS | | 1 | 121 | 141 (10)| 00:00:02 |
|* 10 | HASH JOIN | | 1 | 111 | 140 (10)| 00:00:02 |
|* 11 | TABLE ACCESS BY INDEX ROWID | ANALYSES | 1 | 43 | 0 (0)| 00:00:01 |
| 12 | NESTED LOOPS | | 1 | 94 | 115 (8)| 00:00:01 |
| 13 | NESTED LOOPS | | 1 | 51 | 115 (8)| 00:00:01 |
|* 14 | TABLE ACCESS FULL | ANALYSIS_RESULTS_SUMMARY | 1 | 22 | 114 (8)| 00:00:01 |
|* 15 | TABLE ACCESS BY INDEX ROWID| ANALYSIS_RESULTS_CRITERIA | 1 | 29 | 1 (0)| 00:00:01 |
|* 16 | INDEX UNIQUE SCAN | ANALYSIS_RESULTS_CRITERIA_PK | 1 | | 0 (0)| 00:00:01 |
|* 17 | INDEX RANGE SCAN | ANALYSES_PK | 1 | | 0 (0)| 00:00:01 |
| 18 | VIEW | | 14 | 238 | 24 (13)| 00:00:01 |
|* 19 | FILTER | | | | | |
| 20 | SORT GROUP BY | | 14 | 98 | 24 (13)| 00:00:01 |
| 21 | TABLE ACCESS FULL | ANALYSIS_LOBS | 22909 | 156K| 21 (0)| 00:00:01 |
|* 22 | INDEX RANGE SCAN | ANALYSIS_LOBS_PK | 1 | 10 | 1 (0)| 00:00:01 |
|* 23 | INDEX FULL SCAN | COUNTRY_TO_BU_MAP_PK | 1 | 10 | 1 (0)| 00:00:01 |
|* 24 | INDEX UNIQUE SCAN | RES_LINE_COUNTRY_PK | 1 | 8 | 0 (0)| 00:00:01 |
|* 25 | INDEX RANGE SCAN | ANALYSIS_RESULTS_DETAILS_PK | 59280 | 1157K| 213 (1)| 00:00:02 |
|* 26 | TABLE ACCESS BY INDEX ROWID | RES_LINE_NAMES | 1 | 58 | 1 (0)| 00:00:01 |
|* 27 | INDEX UNIQUE SCAN | RES_LINE_NAME_PK | 1 | | 0 (0)| 00:00:01 |
| 28 | TABLE ACCESS BY INDEX ROWID | COUNTRIES_TO_REGIONS | 1 | 17 | 0 (0)| 00:00:01 |
|* 29 | INDEX UNIQUE SCAN | COUNTRIES_TO_REG_PK | 1 | | 0 (0)| 00:00:01 |
| 30 | TABLE ACCESS BY INDEX ROWID | TREATMENTS | 1 | 22 | 0 (0)| 00:00:01 |
|* 31 | INDEX UNIQUE SCAN | PK_ANALYSIS_ID | 1 | | 0 (0)| 00:00:01 |
Predicate Information (identified by operation id):
1 - filter(SUM(DECODE("ARS"."DATA_TYPE_ID",1,NVL("ARD"."VALUE",0),0))<>0 OR
SUM(DECODE("ARS"."DATA_TYPE_ID",12,NVL("ARD"."VALUE",0),0))<>0 OR
SUM(DECODE("ARS"."DATA_TYPE_ID",27,NVL("ARD"."VALUE",0),0))<>0 OR
SUM(DECODE("ARS"."DATA_TYPE_ID",6,NVL("ARD"."VALUE",0),0))<>0 OR
SUM(DECODE("ARS"."DATA_TYPE_ID",9,NVL("ARD"."VALUE",0),0))<>0 OR
SUM(DECODE("ARS"."DATA_TYPE_ID",13,NVL("ARD"."VALUE",0),0))<>0 OR
SUM(DECODE("ARS"."DATA_TYPE_ID",3,NVL("ARD"."VALUE",0),0))<>0 OR
SUM(DECODE("ARS"."DATA_TYPE_ID",33,NVL("ARD"."VALUE",0),0))<>0 OR
SUM(DECODE("ARS"."DATA_TYPE_ID",31,NVL("ARD"."VALUE",0),0))<>0 OR
SUM(DECODE("ARS"."DATA_TYPE_ID",32,NVL("ARD"."VALUE",0),0))<>0 OR
SUM(DECODE("ARS"."DATA_TYPE_ID",21,NVL("ARD"."VALUE",0),0))<>0)
10 - access("A"."ANALYSIS_ID"="AL_TYPES"."ANALYSIS_ID")
11 - filter("A"."RUN_FREQUENCY"<>2 AND UPPER("A"."NAME") NOT LIKE 'PCSUMM88%')
14 - filter("ARS"."IS_NON_ZERO_TRIANGLE"='Y' AND ("ARS"."DATA_TYPE_ID"=1 OR "ARS"."DATA_TYPE_ID"=3 OR
"ARS"."DATA_TYPE_ID"=6 OR "ARS"."DATA_TYPE_ID"=9 OR "ARS"."DATA_TYPE_ID"=12 OR "ARS"."DATA_TYPE_ID"=13 OR
"ARS"."DATA_TYPE_ID"=21 OR "ARS"."DATA_TYPE_ID"=27 OR "ARS"."DATA_TYPE_ID"=31 OR "ARS"."DATA_TYPE_ID"=32 OR
"ARS"."DATA_TYPE_ID"=33))
15 - filter("ARC"."BUSINESS_UNIT"<>'ALL' AND "ARC"."BUSINESS_UNIT"<>'SEL' AND "ARC"."LOB_VALUE"<>'SEL' AND
"ARC"."MANAGEMENT_UNIT"<>'SEL' AND "ARC"."LOB_VALUE"<>'ALL' AND "ARC"."RCC"='ALL')
16 - access("ARC"."ANALYSIS_CRITERIA_ID"="ARS"."ANALYSIS_CRITERIA_ID")
17 - access("A"."ANALYSIS_ID"="ARC"."ANALYSIS_ID")
19 - filter(MAX("AL"."LOB_TYPE_ID")=2 OR MAX("AL"."LOB_TYPE_ID")=4)
22 - access("AL"."ANALYSIS_ID"="ARC"."ANALYSIS_ID" AND "ARC"."LOB_VALUE"="AL"."LOB_VALUE")
filter("AL"."LOB_VALUE"<>'ALL' AND "AL"."LOB_VALUE"<>'SEL' AND "ARC"."LOB_VALUE"="AL"."LOB_VALUE")
23 - access("CTBM"."BUSINESS_UNIT"="ARC"."BUSINESS_UNIT")
filter("CTBM"."BUSINESS_UNIT"<>'ALL' AND "CTBM"."BUSINESS_UNIT"<>'SEL' AND
"CTBM"."BUSINESS_UNIT"="ARC"."BUSINESS_UNIT")
24 - access("RLC"."LOB_VALUE"="ARC"."LOB_VALUE" AND "RLC"."COUNTRY_CODE"="CTBM"."COUNTRY_CODE")
filter("RLC"."LOB_VALUE"<>'ALL' AND "RLC"."LOB_VALUE"<>'SEL')
25 - access("ARS"."ANALYSIS_RESULTS_ID"="ARD"."ANALYSIS_RESULTS_ID")
26 - filter((TO_NUMBER("RLN"."LOB_TYPE_ID")=4 OR TO_NUMBER("RLN"."LOB_TYPE_ID")=2) AND
"AL_TYPES"."LOB_TYPE_ID"=TO_NUMBER("RLN"."LOB_TYPE_ID"))
27 - access("RLN"."LOB_VALUE"=TO_NUMBER("RLC"."LOB_VALUE"))
29 - access("CTR"."COUNTRY_CODE"="RLC"."COUNTRY_CODE")
31 - access("A"."ANALYSIS_ID"="T"."ANALYSIS_ID")Regards,
Sundeep K
Edited by: kangula on Jan 21, 2011 4:34 PM
Edited by: kangula on Jan 21, 2011 4:36 PMHi Boneist,
I have checked query and it doesnt change much... execution time is same.
Hi Charles,
I have tried using the hint /*+ GATHER_PLAN_STATISTICS */ as below, the query is still executing. Its taking more than 4 hrs... Is there any other way i can get these..
set serveroutput off
SELECT /*+ GATHER_PLAN_STATISTICS */ CASE
WHEN UPPER (a.NAME) LIKE 'PCSUM%UK%RUNOFF%'
THEN 'UK/Ireland'
ELSE ctr.region
END AS region_name,
t.reinsurance_treatment_desc AS reinsurance_treatment,
CASE
WHEN UPPER (a.NAME) LIKE 'PCSUM%UK%RUNOFF%'Will let u know if i get these. In mean time have added new where clause [highlighted below] in query and it took 35 mins to execute. Please find it below along with plan.
explain plan for
SELECT CASE
WHEN UPPER (a.NAME) LIKE 'PCSUM%UK%RUNOFF%'
THEN 'UK/Ireland'
ELSE ctr.region
END AS region_name,
t.reinsurance_treatment_desc AS reinsurance_treatment,
CASE
WHEN UPPER (a.NAME) LIKE 'PCSUM%UK%RUNOFF%'
THEN 'UK Runoff'
ELSE rlc.country_code
END AS country_code,
ars.currency_code, rln.management_line_of_business AS aog_line,
rln.reserving_class, rln.reserving_line, rln.reserving_line_id,
CASE
WHEN UPPER (a.NAME) NOT LIKE 'PCSUMM%'
THEN ''
ELSE CASE
WHEN UPPER (a.NAME) LIKE 'PCSUMM1 %'
THEN 'Attritional'
WHEN UPPER (a.NAME) LIKE 'PCSUMM2 %'
THEN 'Large Loss'
WHEN UPPER (a.NAME) LIKE 'PCSUMM4 %'
THEN 'Total'
ELSE 'Cat'
END
END AS claim_type,
CASE
WHEN MOD (ard.exposure_period, 100) IN (1, 2, 3)
THEN TO_DATE
(TO_CHAR (TRUNC (ard.exposure_period / 100)) || '0101',
'yyyymmdd'
WHEN MOD (ard.exposure_period, 100) IN (4, 5, 6)
THEN TO_DATE ( TO_CHAR (TRUNC (ard.exposure_period / 100))
|| '0401',
'yyyymmdd'
WHEN MOD (ard.exposure_period, 100) IN (7, 8, 9)
THEN TO_DATE ( TO_CHAR (TRUNC (ard.exposure_period / 100))
|| '0701',
'yyyymmdd'
WHEN MOD (ard.exposure_period, 100) IN (10, 11, 12)
THEN TO_DATE ( TO_CHAR (TRUNC (ard.exposure_period / 100))
|| '1001',
'yyyymmdd'
END AS origin_date,
CASE
WHEN MOD (ard.evaluation_period, 100) IN
(1, 2, 3)
THEN TO_DATE
(TO_CHAR (TRUNC (ard.evaluation_period / 100)) || '0331',
'yyyymmdd'
WHEN MOD (ard.evaluation_period, 100) IN (4, 5, 6)
THEN TO_DATE ( TO_CHAR (TRUNC (ard.evaluation_period / 100))
|| '0630',
'yyyymmdd'
WHEN MOD (ard.evaluation_period, 100) IN (7, 8, 9)
THEN TO_DATE ( TO_CHAR (TRUNC (ard.evaluation_period / 100))
|| '0930',
'yyyymmdd'
WHEN MOD (ard.evaluation_period, 100) IN (10, 11, 12)
THEN TO_DATE ( TO_CHAR (TRUNC (ard.evaluation_period / 100))
|| '1231',
'yyyymmdd'
END AS development_date,
SUM (DECODE (ars.data_type_id, 1, NVL (ard.VALUE, 0), 0)
) AS earned_premium,
SUM (DECODE (ars.data_type_id, 12, NVL (ard.VALUE, 0), 0)
) AS paid_losses_and_alae,
SUM (DECODE (ars.data_type_id, 27, NVL (ard.VALUE, 0), 0)
) AS total_incurred_losses_inc_alae,
SUM (DECODE (ars.data_type_id, 6, NVL (ard.VALUE, 0), 0)
) AS paid_loss_total,
SUM (DECODE (ars.data_type_id, 9, NVL (ard.VALUE, 0), 0)
) AS alae_total,
SUM (DECODE (ars.data_type_id, 13, NVL (ard.VALUE, 0), 0)
) AS case_os_total,
SUM (DECODE (ars.data_type_id, 3, NVL (ard.VALUE, 0), 0)
) AS written_premium,
SUM (DECODE (ars.data_type_id, 33, NVL (ard.VALUE, 0), 0)
) AS total_claim_counts,
SUM (DECODE (ars.data_type_id, 31, NVL (ard.VALUE, 0), 0)
) AS open_claim_counts,
SUM (DECODE (ars.data_type_id, 32, NVL (ard.VALUE, 0), 0)
) AS closed_claim_counts,
SUM (DECODE (ars.data_type_id, 21, NVL (ard.VALUE, 0), 0)
) AS total_case_inc_loss,
SYSDATE AS export_date
FROM res_line_country rlc,
res_line_names rln,
risk_history.analysis_results_criteria arc,
(SELECT al.analysis_id,
MAX (al.lob_type_id) AS lob_type_id
FROM analysis_lobs al
GROUP BY analysis_id) al_types,
analyses a,
treatments t,
risk_history.analysis_lobs al,
analysis_results_summary ars,
analysis_results_details ard,
countries_to_regions ctr,
--Created Seperate Table to materialize the inline view - VM
country_to_bu_map ctbm
WHERE rlc.lob_value = rln.lob_value
AND rlc.lob_value = arc.lob_value
AND al_types.lob_type_id = rln.lob_type_id
AND a.analysis_id = al_types.analysis_id
AND a.analysis_id = arc.analysis_id
AND a.analysis_id = t.analysis_id
AND al.analysis_id = arc.analysis_id
AND arc.lob_value = al.lob_value
AND arc.analysis_criteria_id = ars.analysis_criteria_id
AND ars.analysis_results_id = ard.analysis_results_id
AND ctr.country_code = rlc.country_code
AND ctbm.business_unit = arc.business_unit
AND rlc.country_code = ctbm.country_code
AND a.run_frequency !=2
AND ars.is_non_zero_triangle = 'Y'
AND ars.data_type_id IN (1, 12, 27, 6, 9, 13, 3, 33, 31, 32, 21)
AND NOT UPPER (a.NAME) LIKE 'PCSUMM88%'
AND arc.lob_value NOT IN ('ALL', 'SEL') -- get data only for the actual reserving lines
AND al_types.lob_type_id IN (2, 4)
AND arc.management_unit != 'SEL'
AND arc.business_unit NOT IN ('ALL', 'SEL')
AND arc.rcc = 'ALL'
+*AND ard.VALUE <>0*+
GROUP BY CASE
WHEN UPPER (a.NAME) LIKE 'PCSUM%UK%RUNOFF%'
THEN 'UK/Ireland'
ELSE ctr.region
END,
t.reinsurance_treatment_desc,
CASE
WHEN UPPER (a.NAME) LIKE 'PCSUM%UK%RUNOFF%'
THEN 'UK Runoff'
ELSE rlc.country_code
END,
ars.currency_code,
rln.management_line_of_business,
rln.reserving_class,
rln.reserving_line,
rln.reserving_line_id,
CASE
WHEN UPPER (a.NAME) NOT LIKE 'PCSUMM%'
THEN ''
ELSE CASE
WHEN UPPER (a.NAME) LIKE 'PCSUMM1 %'
THEN 'Attritional'
WHEN UPPER (a.NAME) LIKE 'PCSUMM2 %'
THEN 'Large Loss'
WHEN UPPER (a.NAME) LIKE 'PCSUMM4 %'
THEN 'Total'
ELSE 'Cat'
END
END,
CASE
WHEN MOD (ard.exposure_period, 100) IN (1, 2, 3)
THEN TO_DATE ( TO_CHAR (TRUNC (ard.exposure_period / 100))
|| '0101',
'yyyymmdd'
WHEN MOD (ard.exposure_period, 100) IN (4, 5, 6)
THEN TO_DATE ( TO_CHAR (TRUNC (ard.exposure_period / 100))
|| '0401',
'yyyymmdd'
WHEN MOD (ard.exposure_period, 100) IN (7, 8, 9)
THEN TO_DATE ( TO_CHAR (TRUNC (ard.exposure_period / 100))
|| '0701',
'yyyymmdd'
WHEN MOD (ard.exposure_period, 100) IN (10, 11, 12)
THEN TO_DATE ( TO_CHAR (TRUNC (ard.exposure_period / 100))
|| '1001',
'yyyymmdd'
END,
CASE
WHEN MOD (ard.evaluation_period, 100) IN (1, 2, 3)
THEN TO_DATE ( TO_CHAR (TRUNC (ard.evaluation_period / 100))
|| '0331',
'yyyymmdd'
WHEN MOD (ard.evaluation_period, 100) IN (4, 5, 6)
THEN TO_DATE ( TO_CHAR (TRUNC (ard.evaluation_period / 100))
|| '0630',
'yyyymmdd'
WHEN MOD (ard.evaluation_period, 100) IN (7, 8, 9)
THEN TO_DATE ( TO_CHAR (TRUNC (ard.evaluation_period / 100))
|| '0930',
'yyyymmdd'
WHEN MOD (ard.evaluation_period, 100) IN (10, 11, 12)
THEN TO_DATE ( TO_CHAR (TRUNC (ard.evaluation_period / 100))
|| '1231',
'yyyymmdd') END,SYSDATE
HAVING (SUM (DECODE (ars.data_type_id, 1, NVL (ard.VALUE, 0),
12, NVL (ard.VALUE, 0),
27, NVL (ard.VALUE, 0),
6, NVL (ard.VALUE, 0),
9, NVL (ard.VALUE, 0),
13, NVL (ard.VALUE, 0),
3, NVL (ard.VALUE, 0),
33, NVL (ard.VALUE, 0),
31, NVL (ard.VALUE, 0),
32, NVL (ard.VALUE, 0),
21, NVL (ard.VALUE, 0), 0)) != 0 );
select * from table (dbms_xplan.DISPLAY)
PLAN_TABLE_OUTPUT
Plan hash value: 2043043506
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 256 | 355 (5)| 00:00:03 |
|* 1 | FILTER | | | | | |
| 2 | SORT GROUP BY | | 1 | 256 | 355 (5)| 00:00:03 |
| 3 | NESTED LOOPS | | 1 | 256 | 354 (4)| 00:00:03 |
| 4 | NESTED LOOPS | | 1 | 198 | 354 (5)| 00:00:03 |
| 5 | NESTED LOOPS | | 1 | 188 | 354 (5)| 00:00:03 |
| 6 | NESTED LOOPS | | 1 | 166 | 354 (5)| 00:00:03 |
| 7 | NESTED LOOPS | | 1 | 149 | 354 (5)| 00:00:03 |
| 8 | NESTED LOOPS | | 1 | 129 | 141 (10)| 00:00:02 |
| 9 | NESTED LOOPS | | 1 | 121 | 141 (10)| 00:00:02 |
|* 10 | HASH JOIN | | 1 | 111 | 140 (10)| 00:00:02 |
|* 11 | TABLE ACCESS BY INDEX ROWID | ANALYSES | 1 | 43 | 0 (0)| 00:00:01 |
| 12 | NESTED LOOPS | | 1 | 94 | 115 (8)| 00:00:01 |
| 13 | NESTED LOOPS | | 1 | 51 | 115 (8)| 00:00:01 |
|* 14 | TABLE ACCESS FULL | ANALYSIS_RESULTS_SUMMARY | 1 | 22 | 114 (8)| 00:00:01 |
|* 15 | TABLE ACCESS BY INDEX ROWID| ANALYSIS_RESULTS_CRITERIA | 1 | 29 | 1 (0)| 00:00:01 |
|* 16 | INDEX UNIQUE SCAN | ANALYSIS_RESULTS_CRITERIA_PK | 1 | | 0 (0)| 00:00:01 |
|* 17 | INDEX RANGE SCAN | ANALYSES_PK | 1 | | 0 (0)| 00:00:01 |
| 18 | VIEW | | 14 | 238 | 24 (13)| 00:00:01 |
|* 19 | FILTER | | | | | |
| 20 | SORT GROUP BY | | 14 | 98 | 24 (13)| 00:00:01 |
| 21 | TABLE ACCESS FULL | ANALYSIS_LOBS | 22909 | 156K| 21 (0)| 00:00:01 |
|* 22 | INDEX FULL SCAN | COUNTRY_TO_BU_MAP_PK | 1 | 10 | 1 (0)| 00:00:01 |
|* 23 | INDEX UNIQUE SCAN | RES_LINE_COUNTRY_PK | 1 | 8 | 0 (0)| 00:00:01 |
|* 24 | INDEX RANGE SCAN | ANALYSIS_RESULTS_DETAILS_PK | 2964 | 59280 | 213 (1)| 00:00:02 |
| 25 | TABLE ACCESS BY INDEX ROWID | COUNTRIES_TO_REGIONS | 1 | 17 | 0 (0)| 00:00:01 |
|* 26 | INDEX UNIQUE SCAN | COUNTRIES_TO_REG_PK | 1 | | 0 (0)| 00:00:01 |
| 27 | TABLE ACCESS BY INDEX ROWID | TREATMENTS | 1 | 22 | 0 (0)| 00:00:01 |
|* 28 | INDEX UNIQUE SCAN | PK_ANALYSIS_ID | 1 | | 0 (0)| 00:00:01 |
|* 29 | INDEX RANGE SCAN | ANALYSIS_LOBS_PK | 1 | 10 | 1 (0)| 00:00:01 |
|* 30 | TABLE ACCESS BY INDEX ROWID | RES_LINE_NAMES | 1 | 58 | 1 (0)| 00:00:01 |
|* 31 | INDEX UNIQUE SCAN | RES_LINE_NAME_PK | 1 | | 0 (0)| 00:00:01 |
Predicate Information (identified by operation id):
1 - filter(SUM(DECODE("ARS"."DATA_TYPE_ID",1,NVL("ARD"."VALUE",0),12,NVL("ARD"."VALUE",0),27,NVL("ARD"."VALUE"
,0),6,NVL("ARD"."VALUE",0),9,NVL("ARD"."VALUE",0),13,NVL("ARD"."VALUE",0),3,NVL("ARD"."VALUE",0),33,NVL("ARD"."VA
LUE",0),31,NVL("ARD"."VALUE",0),32,NVL("ARD"."VALUE",0),21,NVL("ARD"."VALUE",0),0))<>0)
10 - access("A"."ANALYSIS_ID"="AL_TYPES"."ANALYSIS_ID")
11 - filter("A"."RUN_FREQUENCY"<>2 AND UPPER("A"."NAME") NOT LIKE 'PCSUMM88%')
14 - filter("ARS"."IS_NON_ZERO_TRIANGLE"='Y' AND ("ARS"."DATA_TYPE_ID"=1 OR "ARS"."DATA_TYPE_ID"=3 OR
"ARS"."DATA_TYPE_ID"=6 OR "ARS"."DATA_TYPE_ID"=9 OR "ARS"."DATA_TYPE_ID"=12 OR "ARS"."DATA_TYPE_ID"=13 OR
"ARS"."DATA_TYPE_ID"=21 OR "ARS"."DATA_TYPE_ID"=27 OR "ARS"."DATA_TYPE_ID"=31 OR "ARS"."DATA_TYPE_ID"=32 OR
"ARS"."DATA_TYPE_ID"=33))
15 - filter("ARC"."BUSINESS_UNIT"<>'ALL' AND "ARC"."BUSINESS_UNIT"<>'SEL' AND "ARC"."LOB_VALUE"<>'SEL' AND
"ARC"."MANAGEMENT_UNIT"<>'SEL' AND "ARC"."LOB_VALUE"<>'ALL' AND "ARC"."RCC"='ALL')
16 - access("ARC"."ANALYSIS_CRITERIA_ID"="ARS"."ANALYSIS_CRITERIA_ID")
17 - access("A"."ANALYSIS_ID"="ARC"."ANALYSIS_ID")
19 - filter(MAX("AL"."LOB_TYPE_ID")=2 OR MAX("AL"."LOB_TYPE_ID")=4)
22 - access("CTBM"."BUSINESS_UNIT"="ARC"."BUSINESS_UNIT")
filter("CTBM"."BUSINESS_UNIT"<>'ALL' AND "CTBM"."BUSINESS_UNIT"<>'SEL' AND
"CTBM"."BUSINESS_UNIT"="ARC"."BUSINESS_UNIT")
23 - access("RLC"."LOB_VALUE"="ARC"."LOB_VALUE" AND "RLC"."COUNTRY_CODE"="CTBM"."COUNTRY_CODE")
filter("RLC"."LOB_VALUE"<>'ALL' AND "RLC"."LOB_VALUE"<>'SEL')
24 - access("ARS"."ANALYSIS_RESULTS_ID"="ARD"."ANALYSIS_RESULTS_ID")
filter("ARD"."VALUE"<>0)
26 - access("CTR"."COUNTRY_CODE"="RLC"."COUNTRY_CODE")
28 - access("A"."ANALYSIS_ID"="T"."ANALYSIS_ID")
29 - access("AL"."ANALYSIS_ID"="ARC"."ANALYSIS_ID" AND "ARC"."LOB_VALUE"="AL"."LOB_VALUE")
filter("AL"."LOB_VALUE"<>'ALL' AND "AL"."LOB_VALUE"<>'SEL' AND "ARC"."LOB_VALUE"="AL"."LOB_VALUE")
30 - filter((TO_NUMBER("RLN"."LOB_TYPE_ID")=4 OR TO_NUMBER("RLN"."LOB_TYPE_ID")=2) AND
"AL_TYPES"."LOB_TYPE_ID"=TO_NUMBER("RLN"."LOB_TYPE_ID"))
31 - access("RLN"."LOB_VALUE"=TO_NUMBER("RLC"."LOB_VALUE"))Kindly let me know how to go forward with this.
Regards,
Sunny -
How to measure the phase shift using AC analysis?
Hi,
I have a simple RLC circuit consisting of no more than 4 components. If i hook up the network analyser function to the circuit and read the S11 values, i can see a change in the input impedance and a phase shift when i run it across a range of frequencies.
I am trying to do the same with the AC analysis tool. I've placed a probe on the positive input line. Using the AC analysis i've obtained the input impedance by using the expression mag(V(Probe1))/mag(I(Probe1)). Everything looks fine but i just can't seem to obtain the correct expression to gain the phase shift. All of the values i get out seem to flat line.
It would be great help if someone could point me in the right direction, as i'm running out of ideas.
Thanks for the help.
Attachments:
M1.png 3155 KB
m2.png 618 KBHi 08Ultrasound,
You need to measure the voltage phase difference over a load as the voltage source is ideal so will always be in phase.
Regards,
Adam Brown
Applications Engineer
National Instruments UK -
Switchover problem after upgrade from 11.2.0.1 to 11.2.0.2
Hello
I succesfull upgraded my database from 11.2.0.1 to 11.2.0.2 on my test enviroment.
My enviroment works with dataguard configuration.
Data Guard management is dgmgrl.
OS is Linux Redhat x86_64
I have problem with switchover operation:
During switchover operation (with dgmgrl) new primary database is switched succesfull but problem is with new standby database, I have message:
ORA-10458: standby database requires recovery
ORA-01194: datafile 1, needs more recovery to be consistent
ORA-01110: datafile 1: '/u01/app/oracle/oradata/DB1/system01.dbf'
To end switchover operation I should start new standby instance. But if i try startup It i have:
ORA-00845: MEMORY_TARGET not supported on this system
In alert log new standby database I have:
Completed: ALTER DATABASE COMMIT TO SWITCHOVER TO PHYSICAL STANDBY WITH SESSION SHUTDOWN
Wed Jan 19 08:15:00 2011
Performing implicit shutdown abort due to switchover to physical standby
Shutting down instance (abort)
License high water mark = 20
USER (ospid: 13290): terminating the instance
Instance terminated by USER, pid = 13290
Wed Jan 19 08:15:02 2011
Instance shutdown complete
ORA-1092 : opitsk aborting process
Wed Jan 19 08:15:06 2011
Starting ORACLE instance (normal)
WARNING! Recovering data file 1 from a fuzzy file. If not the current file
it might be an online backup taken without entering the begin backup command.
WARNING! Recovering data file 2 from a fuzzy file. If not the current file
it might be an online backup taken without entering the begin backup command.
WARNING! Recovering data file 3 from a fuzzy file. If not the current file
it might be an online backup taken without entering the begin backup command.
WARNING! Recovering data file 4 from a fuzzy file. If not the current file
it might be an online backup taken without entering the begin backup command..
ARC9: Archival started
ARC0: STARTING ARCH PROCESSES COMPLETE
Media Recovery Log /u01/app/oracle/redologs2/archiveredolog/DB1/1_194_739556401.dbf
Identified End-Of-Redo for thread 1 sequence 194
Wed Jan 19 08:15:20 2011
Using STANDBY_ARCHIVE_DEST parameter default value as /u01/app/oracle/oradata/DB1/archivelog/
RFS[1]: Assigned to RFS process 13553
RFS[1]: Identified database type as 'physical standby': Client is ARCH pid 3536
Starting Data Guard Broker (DMON)
Wed Jan 19 08:15:21 2011
INSV started with pid=32, OS id=13555
RFS[1]: Selected log 4 for thread 1 sequence 197 dbid 1279411810 branch 739556401
Archived Log entry 44349 added for thread 1 sequence 197 ID 0x4f8d3d29 dest 1:
Archived Log entry 44350 added for thread 1 sequence 197 ID 0x4f8d3d29 dest 2:
Archived Log entry 44351 added for thread 1 sequence 197 ID 0x4f8d3d29 dest 3:
Wed Jan 19 08:15:24 2011
Resetting standby activation ID 0 (0x0)
Media Recovery End-Of-Redo indicator encountered
Media Recovery Applied until change 972405267
Completed standby crash recovery.
Errors in file /u01/app/oracle/diag/rdbms/tdb1nod1/DB1/trace/DB1_ora_13451.trc:
ORA-10458: standby database requires recovery
ORA-01194: plik 1, aby byl spojny, wymaga dalszego przywracania
ORA-01110: plik danych 1: '/u01/app/oracle/oradata/DB1/system01.dbf'
ORA-10458 signalled during: alter database open...
Wed Jan 19 08:15:25 2011
RFS[2]: Assigned to RFS process 13603
RFS[2]: Identified database type as 'physical standby': Client is ARCH pid 3532
Wed Jan 19 08:15:26 2011
RFS[3]: Assigned to RFS process 13619
RFS[3]: Identified database type as 'physical standby': Client is ARCH pid 3536
RFS[3]: Opened log for thread 1 sequence 196 dbid 1279411810 branch 739556401
Wed Jan 19 08:15:26 2011
RFS[4]: Assigned to RFS process 13617
RFS[4]: Identified database type as 'physical standby': Client is ARCH pid 3534
Archived Log entry 44352 added for thread 1 sequence 196 rlc 739556401 ID 0x4f8d3d29 dest 4:
RFS[4]: Opened log for thread 1 sequence 195 dbid 1279411810 branch 739556401
Archived Log entry 44353 added for thread 1 sequence 195 rlc 739556401 ID 0x4f8d3d29 dest 4:
Wed Jan 19 08:15:29 2011
RFS[5]: Assigned to RFS process 13643
RFS[5]: Identified database type as 'physical standby': Client is LGWR ASYNC pid 7251
Primary database is in MAXIMUM PERFORMANCE mode
RFS[5]: Selected log 4 for thread 1 sequence 199 dbid 1279411810 branch 739556401
Wed Jan 19 08:15:30 2011
RFS[6]: Assigned to RFS process 13645
RFS[6]: Identified database type as 'physical standby': Client is ARCH pid 3536
RFS[6]: Selected log 5 for thread 1 sequence 198 dbid 1279411810 branch 739556401
Wed Jan 19 08:15:31 2011
Archived Log entry 44354 added for thread 1 sequence 198 ID 0x4f8d3d29 dest 1:
Archived Log entry 44355 added for thread 1 sequence 198 ID 0x4f8d3d29 dest 2:
Archived Log entry 44356 added for thread 1 sequence 198 ID 0x4f8d3d29 dest 3:
Wed Jan 19 08:15:45 2011
RFS[7]: Assigned to RFS process 13699
RFS[7]: Identified database type as 'physical standby': Client is ARCH pid 3532
Wed Jan 19 08:16:47 2011
RFS[7]: Assigned to RFS process 13699
RFS[7]: Identified database type as 'physical standby': Client is ARCH pid 3532
Wed Jan 19 08:16:47 2011
Starting ORACLE instance (normal)
WARNING: You are trying to use the MEMORY_TARGET feature. This feature requires the /dev/shm file system to be mounted for at least 2147483648 bytes. /dev/shm is either not mounted or is mounted with available space less than this size. Please fix this so that MEMORY_TARGET can work as expected. Current available is 1586806784 and used is 3781902336 bytes. Ensure that the mount point is /dev/shm for this directory.
memory_target needs larger /dev/shm
Wed Jan 19 08:30:17 2011
db_recovery_file_dest_size of 102400 MB is 0.00% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
It is look like the instance proseses was not shutdown during operation shutdown abort.
If I connect to instance with sqlplus i have message:
Connected with idle instance
Proceses are still active.
Output linux statement ps -aux | grep oracle:
root 13032 0.0 0.0 88060 3248 ? Ss 08:13 0:00 sshd: oracle [priv]
oracle 13039 0.0 0.0 88060 1860 ? S 08:13 0:00 sshd: oracle@pts/1
oracle 13040 0.0 0.0 68248 1676 pts/1 Ss 08:13 0:00 -bash
oracle 13402 0.0 0.3 2328080 22220 ? Ss 08:15 0:00 ora_pmon_DB1
oracle 13404 0.0 0.2 2325832 15536 ? Ss 08:15 0:00 ora_vktm_DB1
oracle 13408 0.0 0.2 2325832 15584 ? Ss 08:15 0:00 ora_gen0_DB1
oracle 13412 0.0 0.2 2325832 15468 ? Ss 08:15 0:00 ora_diag_DB1
oracle 13414 0.0 0.2 2325832 15584 ? Ss 08:15 0:00 ora_dbrm_DB1
oracle 13416 0.0 0.2 2325832 15680 ? Ss 08:15 0:00 ora_psp0_DB1
oracle 13419 0.1 0.4 2327368 25688 ? Ss 08:15 0:08 ora_dia0_DB1
oracle 13422 0.0 0.8 2325832 49152 ? Ss 08:15 0:02 ora_mman_DB1
oracle 13425 0.0 0.4 2332100 27344 ? Ss 08:15 0:00 ora_dbw0_DB1
oracle 13427 0.0 0.2 2325832 16648 ? Ss 08:15 0:00 ora_lgwr_DB1
oracle 13432 0.0 0.3 2325832 21524 ? Ss 08:15 0:00 ora_ckpt_DB1
oracle 13434 0.0 0.2 2325832 17600 ? Ss 08:15 0:00 ora_smon_DB1
oracle 13436 0.0 0.2 2325832 15604 ? Ss 08:15 0:00 ora_reco_DB1
oracle 13438 0.0 0.4 2326468 27976 ? Ss 08:15 0:00 ora_mmon_DB1
oracle 13440 0.0 0.3 2325832 22120 ? Ss 08:15 0:00 ora_mmnl_DB1
oracle 13442 0.0 0.2 2331932 15764 ? Ss 08:15 0:00 ora_d000_DB1
oracle 13444 0.0 0.2 2326896 14784 ? Ss 08:15 0:00 ora_s000_DB1
oracle 13447 0.0 0.2 2325852 16628 ? Ss 08:15 0:00 ora_dmon_DB1
oracle 13527 0.0 0.8 2357896 48984 ? Ss 08:15 0:00 ora_arc0_DB1
oracle 13530 0.0 0.5 2341496 31832 ? Ss 08:15 0:00 ora_arc1_DB1
oracle 13532 0.0 0.8 2359596 50968 ? Ss 08:15 0:00 ora_arc2_DB1
oracle 13534 0.0 0.7 2357896 48844 ? Ss 08:15 0:00 ora_arc3_DB1
oracle 13536 0.0 0.8 2357896 48860 ? Ss 08:15 0:00 ora_arc4_DB1
oracle 13538 0.0 0.5 2341384 31524 ? Ss 08:15 0:00 ora_arc5_DB1
oracle 13540 0.0 0.5 2341384 31536 ? Ss 08:15 0:00 ora_arc6_DB1
oracle 13542 0.0 0.5 2341384 31536 ? Ss 08:15 0:00 ora_arc7_DB1
oracle 13545 0.0 0.5 2341384 31536 ? Ss 08:15 0:00 ora_arc8_DB1
oracle 13547 0.0 0.5 2341384 31536 ? Ss 08:15 0:00 ora_arc9_DB1
oracle 13555 0.0 0.2 2325852 16168 ? Ss 08:15 0:00 ora_insv_DB1
root 18288 0.0 0.0 88060 3240 ? Ss 08:30 0:00 sshd: oracle [priv]
oracle 18290 0.0 0.0 88200 2012 ? S 08:30 0:00 sshd: oracle@notty
oracle 18291 0.0 0.0 54004 2232 ? Ss 08:30 0:00 /usr/libexec/openssh/sftp-server
oracle 18336 0.0 0.2 87132 13336 ? Ssl 08:41 0:00 /u01/app/oracle/product/11.2.0/db_2/bin/tnslsnr LISTENER -inherit
oracle 18607 0.1 0.6 2350168 39972 ? Ss 09:37 0:00 oracleDB1 (LOCAL=NO)
oracle 18609 0.1 1.4 2395944 85880 ? Ss 09:37 0:00 oracleDB1 (LOCAL=NO)
oracle 18611 0.0 0.5 2346216 36100 ? Ss 09:37 0:00 oracleDB1 (LOCAL=NO)
oracle 18615 0.1 0.2 2331228 18136 ? Ss 09:38 0:00 oracleDB1 (LOCAL=NO)
oracle 18617 0.1 0.3 2332184 21508 ? Ss 09:38 0:00 oracleDB1 (LOCAL=NO)
oracle 18619 0.0 0.0 65556 940 pts/1 R+ 09:38 0:00 ps -aux
oracle 18620 0.0 0.0 61160 736 pts/1 S+ 09:38 0:00 grep oracle
Shared memory is still allocated for instance:
df -h /dev/shm
System plików rozm. użyte dost. %uż. zamont. na
tmpfs 5,0G 2,0G 3,1G 39% /dev/shm
Please for help.
Regards
KarolIt is lool like the new standby database is started from old home:
alert log:
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options.
Using parameter settings in server-side spfile /u01/app/oracle/product/11.2.0/db_1/dbs/spfileDB1.ora
System parameters with non-default values:
My old home (11.2.0.1) u01/app/oracle/product/11.2.0/db_1
My new home (11.2.0.2) u01/app/oracle/product/11.2.0/db_2
previous start this database:
alert log:
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options.
Using parameter settings in server-side spfile /u01/app/oracle/product/11.2.0/db_2/dbs/spfileDB1.ora
System parameters with non-default values:
Why database is starting from old home?
I Changed directories in .bash_profile oracle OS user. -
ORA-00349: failure obtaining block size for '+Z' in Oracle XE
Hello,
I am attempting to move the online redo log files to a new flash recovery area location created on network drive "Z" ( Oracle Database 10g Express Edition Release 10.2.0.1.0).
When I run @?/sqlplus/admin/movelogs; in SQL*Plus as a local sysdba, I get the following errors:
ERROR at line 1:
ORA-00349: failure obtaining block size for '+Z'
ORA-06512: at line 14
Please let me know how to go about resolving this issue.
Thank you.
See below for detail:
Connected.
SQL> @?/sqlplus/admin/movelogs;
SQL> Rem
SQL> Rem $Header: movelogs.sql 19-jan-2006.00:23:11 banand Exp $
SQL> Rem
SQL> Rem movelogs.sql
SQL> Rem
SQL> Rem Copyright (c) 2006, Oracle. All rights reserved.
SQL> Rem
SQL> Rem NAME
SQL> Rem movelogs.sql - move online logs to new Flash Recovery Area
SQL> Rem
SQL> Rem DESCRIPTION
SQL> Rem This script can be used to move online logs from old online
log
SQL> Rem location to Flash Recovery Area. It assumes that the database
SQL> Rem instance is started with new Flash Recovery Area location.
SQL> Rem
SQL> Rem NOTES
SQL> Rem For use to rename online logs after moving Flash Recovery
Area.
SQL> Rem The script can be executed using following command
SQL> Rem sqlplus '/ as sysdba' @movelogs.sql
SQL> Rem
SQL> Rem MODIFIED (MM/DD/YY)
SQL> Rem banand 01/19/06 - Created
SQL> Rem
SQL>
SQL> SET ECHO ON
SQL> SET FEEDBACK 1
SQL> SET NUMWIDTH 10
SQL> SET LINESIZE 80
SQL> SET TRIMSPOOL ON
SQL> SET TAB OFF
SQL> SET PAGESIZE 100
SQL> declare
2 cursor rlc is
3 select group# grp, thread# thr, bytes/1024 bytes_k
4 from v$log
5 order by 1;
6 stmt varchar2(2048);
7 swtstmt varchar2(1024) := 'alter system switch logfile';
8 ckpstmt varchar2(1024) := 'alter system checkpoint global';
9 begin
10 for rlcRec in rlc loop
11 stmt := 'alter database add logfile thread ' ||
12 rlcRec.thr || ' size ' ||
13 rlcRec.bytes_k || 'K';
14 execute immediate stmt;
15 begin
16 stmt := 'alter database drop logfile group ' || rlcRec.grp;
17 execute immediate stmt;
18 exception
19 when others then
20 execute immediate swtstmt;
21 execute immediate ckpstmt;
22 execute immediate stmt;
23 end;
24 execute immediate swtstmt;
25 end loop;
26 end;
27 /
declare
ERROR at line 1:
ORA-00349: failure obtaining block size for '+Z'
ORA-06512: at line 14
Can someone point me in the right direction as to what I may be doing wrong here - Thank you!888442 wrote:
I am trying to drop and recreate ONLINE redo logs on my STANDB DATABASE (11.1.0.7)., but i am getting the below error.
On primary, we have done the changes., ie we added new logfile with bigger size and 3 members. When trying to do the same on Standby we are getting this error.
Our database is in Active DG Read only mode and the oracle version is 11.1.0.7.
I have deffered the log apply and cancelled the managed recovery, and dg is in manual mode.
SQL> alter database Add LOGFILE GROUP 4 ('+DT_DG1','+DT_DG2','+DT_DG3') SIZE 1024M;
alter database Add LOGFILE GROUP 4 ('+DT_DG1','+DT_DG2','+DT_DG3') SIZE 1024M
ERROR at line 1:
ORA-00349: failure obtaining block size for '+DT_DG1'First why you are dropping & recreating online redo log files on standby.
On standby only standby redo log files will be used. Not sure what you are trying to do.
here is example how to create online redo log files, Check that diskgroup is mounted and have sufficient space to create.
sys@ORCL> select member from v$logfile;
MEMBER
C:\ORACLE\ORADATA\ORCL\REDO03.LOG
C:\ORACLE\ORADATA\ORCL\REDO02.LOG
C:\ORACLE\ORADATA\ORCL\REDO01.LOG
sys@ORCL> alter database add logfile group 4 (
2 'C:\ORACLE\ORADATA\ORCL\redo_g01a.log',
3 'C:\ORACLE\ORADATA\ORCL\redo_g01b.log',
4 'C:\ORACLE\ORADATA\ORCL\redo_g01c.log') size 10m;
Database altered.
sys@ORCL> select member from v$logfile;
MEMBER
C:\ORACLE\ORADATA\ORCL\REDO03.LOG
C:\ORACLE\ORADATA\ORCL\REDO02.LOG
C:\ORACLE\ORADATA\ORCL\REDO01.LOG
C:\ORACLE\ORADATA\ORCL\REDO_G01A.LOG
C:\ORACLE\ORADATA\ORCL\REDO_G01B.LOG
C:\ORACLE\ORADATA\ORCL\REDO_G01C.LOG
6 rows selected.
sys@ORCL>
Your profile:-
888442
Newbie
Handle: 888442
Status Level: Newbie
Registered: Sep 29, 2011
Total Posts: 12
Total Questions: 8 (7 unresolved)
Close the threads if answered, Keep the forum clean. -
My Active dataguard is not applying archives.
Dears,
Following is my setup
=====================
Primary:
prod on RAC with 2 nodes
Database : Oracle 11.2.0.3
OS OEL 5.7
storage : ASM
+DATADG
+FLASHDG
Standby:
sync on single node
Database : Oracle 11.2.0.3
storage : ASM
+DATADG
+FLASHDG
I've configured Active dataguard successfully and was able to apply archivelogs successfully instantly.
Archive log locations are +FLASHDG/prod/ARCHIVELOG/ AND /u02/arch --- on primary
Archive log locations are +FLASHDG/stby/ARCHIVELOG/ AND /u02/arch --- on standby
On Standby
===========
SQL> select 'Using Active Data Guard' ADG from v$managed_standby m,v$database d where m.process like 'MRP%' ;
ADG
Using Active Data Guard
SQL> select open_mode,database_role,PROTECTION_MODE,PROTECTION_LEVEL from v$database;
OPEN_MODE DATABASE_ROLE PROTECTION_MODE PROTECTION_LEVEL
READ ONLY WITH APPLY PHYSICAL STANDBY MAXIMUM PERFORMANCE MAXIMUM PERFORMANCE
SQL>
Upto now everything is ok, means same data is sync on primary and standby. As my archive location was getting full, i've used this SQL query to clean them
SELECT 'alter diskgroup '||dg.name||' drop file
''+'||dg.name||''||SYS_CONNECT_BY_PATH(al.name,'/')||''';'
FROM v$asm_alias al, v$asm_file fi, v$asm_diskgroup dg
WHERE al.file_number = fi.file_number(+)
AND al.group_number = dg.group_number
AND fi.type = 'ARCHIVELOG'
START WITH alias_index = 0
CONNECT BY PRIOR al.reference_index = al.parent_index;
SELECT 'alter diskgroup '||dg.name||' drop file
''+'||dg.name||''||SYS_CONNECT_BY_PATH(al.name,'/')||''';'
FROM v$asm_alias al, v$asm_file fi, v$asm_diskgroup dg
WHERE al.file_number = fi.file_number(+)
AND al.group_number = dg.group_number
AND fi.type = 'BACKUPSET'
START WITH alias_index = 0
CONNECT BY PRIOR al.reference_index = al.parent_index;
In order to delete ARCHIVE logs which are stored in ASM FLASHDG, which will have a type of "ARCHIVELOG" and "BACKUPSET" i've used this above two queries.
After performing this steps , my Active dataguard is not applying archives.
On the primary server, check the latest archived redo log
SELECT sequence#, first_time, next_time
FROM v$archived_log
ORDER BY sequence#;
2809 16-APR-13 16-APR-13
2809 16-APR-13 16-APR-13
2809 16-APR-13 16-APR-13
2810 16-APR-13 16-APR-13
2810 16-APR-13 16-APR-13
2810 16-APR-13 16-APR-13
2811 16-APR-13 16-APR-13
2811 16-APR-13 16-APR-13
2811 16-APR-13 16-APR-13
2812 16-APR-13 16-APR-13
2812 16-APR-13 16-APR-13
2812 16-APR-13 16-APR-13
2813 16-APR-13 16-APR-13
2813 16-APR-13 16-APR-13
2814 16-APR-13 16-APR-13
2814 16-APR-13 16-APR-13
2815 16-APR-13 16-APR-13
2815 16-APR-13 16-APR-13
2816 16-APR-13 16-APR-13
2816 16-APR-13 16-APR-13
2817 16-APR-13 16-APR-13
2817 16-APR-13 16-APR-13
2818 16-APR-13 16-APR-13
2818 16-APR-13 16-APR-13
2819 16-APR-13 16-APR-13
2819 16-APR-13 16-APR-13
2820 16-APR-13 16-APR-13
2820 16-APR-13 16-APR-13
2821 16-APR-13 16-APR-13
2821 16-APR-13 16-APR-13
2822 16-APR-13 16-APR-13
2822 16-APR-13 16-APR-13
2823 16-APR-13 16-APR-13
2823 16-APR-13 16-APR-13
2824 16-APR-13 16-APR-13
2824 16-APR-13 16-APR-13
2825 16-APR-13 16-APR-13
2825 16-APR-13 16-APR-13
2826 16-APR-13 16-APR-13
2826 16-APR-13 16-APR-13
2827 16-APR-13 16-APR-13
2827 16-APR-13 16-APR-13
2828 16-APR-13 16-APR-13
2828 16-APR-13 16-APR-13
2829 16-APR-13 16-APR-13
2829 16-APR-13 16-APR-13
2830 16-APR-13 16-APR-13
2830 16-APR-13 16-APR-13
2831 16-APR-13 16-APR-13
2831 16-APR-13 16-APR-13
2832 16-APR-13 16-APR-13
2832 16-APR-13 16-APR-13
2833 16-APR-13 16-APR-13
2833 16-APR-13 16-APR-13
2834 16-APR-13 16-APR-13
2834 16-APR-13 16-APR-13
2835 16-APR-13 16-APR-13
2835 16-APR-13 16-APR-13
2836 16-APR-13 16-APR-13
2836 16-APR-13 16-APR-13
2837 16-APR-13 16-APR-13
2837 16-APR-13 16-APR-13
2838 16-APR-13 16-APR-13
2838 16-APR-13 16-APR-13
2839 16-APR-13 16-APR-13
2839 16-APR-13 16-APR-13
2840 16-APR-13 16-APR-13
2840 16-APR-13 16-APR-13
2841 16-APR-13 16-APR-13
2841 16-APR-13 16-APR-13
2842 16-APR-13 16-APR-13
2842 16-APR-13 16-APR-13
2843 16-APR-13 16-APR-13
2843 16-APR-13 16-APR-13
2844 16-APR-13 16-APR-13
2844 16-APR-13 16-APR-13
2845 16-APR-13 16-APR-13
2845 16-APR-13 16-APR-13
2846 16-APR-13 16-APR-13
2846 16-APR-13 16-APR-13
Check the new archived redo log has arrived at the standby server and been applied.
SELECT sequence#, first_time, next_time, applied
FROM v$archived_log
ORDER BY sequence#;
2801 15-APR-13 15-APR-13 YES
2801 15-APR-13 15-APR-13 YES
2802 15-APR-13 15-APR-13 YES
2802 15-APR-13 15-APR-13 YES
2803 15-APR-13 15-APR-13 YES
2803 15-APR-13 15-APR-13 YES
2804 15-APR-13 15-APR-13 YES
2804 15-APR-13 15-APR-13 YES
2805 15-APR-13 15-APR-13 YES
2805 15-APR-13 15-APR-13 YES
2806 15-APR-13 15-APR-13 YES
2806 15-APR-13 15-APR-13 YES
2807 15-APR-13 15-APR-13 YES
2807 15-APR-13 15-APR-13 YES
2808 15-APR-13 16-APR-13 YES
2808 15-APR-13 16-APR-13 YES
2809 16-APR-13 16-APR-13 YES
2809 16-APR-13 16-APR-13 YES
2810 16-APR-13 16-APR-13 YES
2810 16-APR-13 16-APR-13 YES
2811 16-APR-13 16-APR-13 YES
2811 16-APR-13 16-APR-13 YES
2812 16-APR-13 16-APR-13 IN-MEMORY
2812 16-APR-13 16-APR-13 YES
So could anyone help me to resolve this issue. Anticipating your response at the earliest.
Regards,
VIKHAR
Edited by: VIKHARAHMED on Apr 16, 2013 9:38 AMHere is the alert log file
Media Recovery Log +FLASHDG/stby/archivelog/2013_04_16/thread_2_seq_1476.1987.812900733
Tue Apr 16 18:56:42 2013
Primary database is in MAXIMUM PERFORMANCE mode
RFS[1]: Assigned to RFS process 16803
RFS[1]: Selected log 12 for thread 2 sequence 1485 dbid 220323208 branch 808484882
Tue Apr 16 18:56:42 2013
RFS[2]: Assigned to RFS process 16807
RFS[2]: Opened log for thread 2 sequence 1484 dbid 220323208 branch 808484882
Archived Log entry 6324 added for thread 2 sequence 1484 rlc 808484882 ID 0xd21a288 dest 10:
Tue Apr 16 19:09:02 2013
RFS[1]: Selected log 11 for thread 2 sequence 1486 dbid 220323208 branch 808484882
Tue Apr 16 19:09:02 2013
Archived Log entry 6325 added for thread 2 sequence 1485 ID 0xd21a288 dest 1:
Archived Log entry 6326 added for thread 2 sequence 1485 ID 0xd21a288 dest 2:
Tue Apr 16 19:12:23 2013
RFS[1]: Selected log 12 for thread 2 sequence 1487 dbid 220323208 branch 808484882
Tue Apr 16 19:12:23 2013
Archived Log entry 6327 added for thread 2 sequence 1486 ID 0xd21a288 dest 1:
Archived Log entry 6328 added for thread 2 sequence 1486 ID 0xd21a288 dest 2:
Tue Apr 16 19:14:41 2013
"alert_stby.log" 845L, 33990C 782,1 94%
Tue Apr 16 19:17:27 2013
Archived Log entry 6331 added for thread 2 sequence 1488 ID 0xd21a288 dest 1:
Archived Log entry 6332 added for thread 2 sequence 1488 ID 0xd21a288 dest 2:
Tue Apr 16 19:25:51 2013
RFS[1]: Selected log 11 for thread 2 sequence 1490 dbid 220323208 branch 808484882
Tue Apr 16 19:25:51 2013
Archived Log entry 6333 added for thread 2 sequence 1489 ID 0xd21a288 dest 1:
Archived Log entry 6334 added for thread 2 sequence 1489 ID 0xd21a288 dest 2:
Tue Apr 16 19:51:02 2013
RFS[1]: Selected log 12 for thread 2 sequence 1491 dbid 220323208 branch 808484882
Tue Apr 16 19:51:02 2013
Archived Log entry 6335 added for thread 2 sequence 1490 ID 0xd21a288 dest 1:
Archived Log entry 6336 added for thread 2 sequence 1490 ID 0xd21a288 dest 2:
Tue Apr 16 20:37:12 2013
RFS[1]: Selected log 11 for thread 2 sequence 1492 dbid 220323208 branch 808484882
Tue Apr 16 20:37:12 2013
Archived Log entry 6337 added for thread 2 sequence 1491 ID 0xd21a288 dest 1:
Archived Log entry 6338 added for thread 2 sequence 1491 ID 0xd21a288 dest 2:
Tue Apr 16 21:08:23 2013
RFS[1]: Selected log 12 for thread 2 sequence 1493 dbid 220323208 branch 808484882
Tue Apr 16 21:08:23 2013
Archived Log entry 6339 added for thread 2 sequence 1492 ID 0xd21a288 dest 1:
Archived Log entry 6340 added for thread 2 sequence 1492 ID 0xd21a288 dest 2:
Tue Apr 16 22:16:06 2013
RFS[1]: Selected log 11 for thread 2 sequence 1494 dbid 220323208 branch 808484882
Tue Apr 16 22:16:06 2013
Archived Log entry 6341 added for thread 2 sequence 1493 ID 0xd21a288 dest 1:
Archived Log entry 6342 added for thread 2 sequence 1493 ID 0xd21a288 dest 2:
Tue Apr 16 22:31:46 2013
RFS[1]: Selected log 12 for thread 2 sequence 1495 dbid 220323208 branch 808484882
Tue Apr 16 22:31:46 2013
Archived Log entry 6343 added for thread 2 sequence 1494 ID 0xd21a288 dest 1:
Archived Log entry 6344 added for thread 2 sequence 1494 ID 0xd21a288 dest 2:
Wed Apr 17 09:31:59 2013
RFS[1]: Selected log 11 for thread 2 sequence 1496 dbid 220323208 branch 808484882
Wed Apr 17 09:32:00 2013
Archived Log entry 6345 added for thread 2 sequence 1495 ID 0xd21a288 dest 1:
Archived Log entry 6346 added for thread 2 sequence 1495 ID 0xd21a288 dest 2: -
Help to troubleshoot a 3G connection.
Hello!
I need help to troubleshoot a 3G connection.
It's a CISCO2921/K9 with UC license and a 3G Interface.
I used the manual to make the configuration, step by step, I can send and receive SMS by 3G network, and connect, take a IP, DNS etc, but I don't able to ping or send and receive data with the 3G connection.
See the information:
show ip int br
Interface IP-Address OK? Method Status Protocol
Embedded-Service-Engine0/0 unassigned YES NVRAM administratively down down
GigabitEthernet0/0 192.168.50.1 YES NVRAM up up
GigabitEthernet0/1 192.168.6.253 YES DHCP up up
GigabitEthernet0/2 unassigned YES NVRAM administratively down down
Cellular0/0/0 unassigned YES NVRAM up up
Cellular0/0/1 unassigned YES unset down down
Dialer1 191.27.49.172 YES IPCP up up
NVI0 192.168.50.1 YES unset up up
I have a radio ISP connected on interface G0/1 and my internal network is connected in G0/0 on a Layer 3 Switch.
3G configuration:
chat-script hspa-R7 "" "AT!SCACT=1,1" TIMEOUT 60 "OK"
cellular 0/0/0 gsm profile create 1 zap.vivo.com.br PAP vivo vivo
interface Cellular0/0/0
ip address negotiated
ip nat outside
ip virtual-reassembly in
encapsulation slip
dialer persitent
dialer pool-member 1
async mode interactive
interface Dialer1
ip address negotiated
ip nat outside
ip virtual-reassembly in
encapsulation slip
dialer pool 1
dialer idle-timeout 0
dialer string hspa-R7
dialer persistent
dialer-group 99
ip nat inside source list 1 interface GigabitEthernet0/1 overload
ip nat inside source list 89 interface Cellular0/0/0 overload
ip nat inside source list 90 interface Dialer1 overload
access-list 1 permit any
access-list 89 permit any
access-list 90 permit any
ip route 0.0.0.0 0.0.0.0 Dialer1
ip route 0.0.0.0 0.0.0.0 192.168.6.1
access-list 1 permit any
access-list 89 permit any
access-list 90 permit any
line 0/0/0
exec-timeout 0 0
script dialer hspa-R7
modem InOut
no exec
transport input all
Dialer1 is up, line protocol is up (spoofing)
Hardware is Unknown
Internet address is 191.27.49.172/32
MTU 1500 bytes, BW 56 Kbit/sec, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation SLIP, loopback not set
Keepalive set (10 sec)
DTR is pulsed for 1 seconds on reset
Interface is bound to Ce0/0/0
Last input never, output never, output hang never
Last clearing of "show interface" counters 00:15:57
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes
508 packets output, 41923 bytes
Bound to:
Cellular0/0/0 is up, line protocol is up
Hardware is QuadBand HSPA+R7/HSPA/UMTS QuadBand EDGE/GPRS and GPS for AT&T
Description: PrimaryWANDesc_
Internet address will be assigned dynamically by the network
MTU 1500 bytes, BW 5760 Kbit/sec, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation SLIP, loopback not set
Keepalive not supported
Interface is bound to Di1 (Encapsulation SLIP)
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/10 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts (0 IP multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
508 packets output, 41923 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 unknown protocol drops
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
DCD=up DSR=up DTR=up RTS=up CTS=up
Profile Information
====================
Profile password Encryption level: 7
Profile 1 = ACTIVE* **
PDP Type = IPv4
PDP address = 191.27.49.172
Access Point Name (APN) = zap.vivo.com.br
Authentication = PAP
Username: vivo
Password: 0870191E5D495746335B2E
Primary DNS address = 187.100.246.254
Secondary DNS address = 187.100.246.251
Profile 2 = INACTIVE
PDP Type = IPv4
Access Point Name (APN) = wap.cingular
Authentication = None
Username:
Password: 03
* - Default profile
Data Connection Information
===========================
Data Transmitted = 41923 bytes, Received = 0 bytes
Profile 1, Packet Session Status = ACTIVE
IP address = 191.27.49.172
Primary DNS address = 187.100.246.254
Secondary DNS address = 187.100.246.251
Negotiated QOS Parameters:
Precedence = Normal Priority, Delay = Class 2
Reliability = Unack GTP, LLC, Ack RLC, Protected data
Peak = 256 kB/sec, Mean = 50000 kB/hr
Traffic Class = Interactive
Uplink Max = 11.5Mbps, Guaranteed = Subscribed
Downlink Max = 42Mbps, Guaranteed = Subscribed
Max SDU size = 1500 bytes
SDU error ratio = 1E-4, BER = 1E-5
Profile 2, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 3, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 4, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 5, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 6, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 7, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 8, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 9, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 10, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 11, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 12, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 13, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 14, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 15, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 16, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Network Information
===================
Current Service Status = Normal, Service Error = None
Current Service = Combined
Packet Service = HSPA+ (Attached)
Packet Session Status = Active
Current Roaming Status = Home
Network Selection Mode = Automatic
Country = BRA, Network = VIVO
Mobile Country Code (MCC) = 724
Mobile Network Code (MNC) = 23
Location Area Code (LAC) = 27135
Routing Area Code (RAC) = 4
Cell ID = 57743
Primary Scrambling Code = 115
PLMN Selection = Automatic
Registered PLMN = , Abbreviated =
Service Provider = VIVO
Radio Information
=================
Radio power mode = ON
Current Band = WCDMA 850, Channel Number = 4385
Current RSSI = -60 dBm
Band Selected = Auto
Number of nearby cells = 1
Cell 1
Primary Scrambling Code = 0x73
RSCP = -63 dBm, ECIO = -7 dBm
Modem Security Information
==========================
Card Holder Verification (CHV1) = Disabled
SIM Status = OK
SIM User Operation Required = None
Number of CHV1 Retries remaining = 3
Incoming Message Information
SMS stored in modem = 1
SMS archived since booting up = 0
Total SMS deleted since booting up = 0
Storage records allocated = 30
Storage records used = 1
Number of callbacks triggered by SMS = 0
Number of successful archive since booting up = 0
Number of failed archive since booting up = 0Refer this URL for how to configure the modem through serial port
http://docs.sun.com:80/ab2/coll.47.11/SYSADV2/@Ab2PageView/17395?DwebQuery=modem+configuration&Ab2Lang=C&Ab2Enc=iso-8859-1
Thanks,
Senthilkumar
Developer Technical Support
Sun Microsystems, Inc.
http://www.sun.com/developers/support -
Why can't I edit the Master Database
Can someone from NI please explain the reasoning behind not letting the user edit the master database? I want to do something simple like remove one of the redundant + and "dot" polarity indicators on some of the capacitor footprints without having to, one by one, change each capacitor to use my custom footprint.
I have found several errors in the master database yet I can't fix those parts or footprints or remove them, thus increasing the likely hood that they will get used by mistake/unknowingly again.
The only explanation that I can come up with is poor database design and fear of me "breaking" it. Something as simple as editing a part through the GUI should be simple enough to do to, please let me. No offense, but your master database is not good enough to warrant "no edits". Most parts I use are from the local database, but that is not an option for special case parts like resistors and capacitors.
Also, why I can't edit the database itself without using the GUI? (as is an option in all other CAD packages that I've used). The GUI entry point is extremely time consuming and error prone when a database script can often easily create error/typo free part numbers using existing symbols and footprints.
GregThere are several ways you can achieve the results you looking for with respect to RLCs.
Ultiboard first searchs the User then Corporate the Master database when looking for footprints. So, if you want to make a modification to a footprint, make the copy the appropriate in Ultiboard into your User database. Then modify the footprint. When you transfer from Multisim to Ultiboard, Ultiboard will pick the footprint you customized (or fixed).
One thing to watch out for is determining the correct name in Ultiboard. The name in Multisim is often not the name in Ultiboard. I don't know of any simple way of determing the mapping.
Place the component with the footprint that you want to change (in Multisim)
Double click the component, and click Edit Footprint on the Value page
Click Select from Database. The footprint should be selected. The name in Ultiboard is the Ultiboard Footprint column (if it is blank, then the name in Multisim and Ultiboard is the same).
You can add new footprints to the list in the Place Component dialog. You do this in the Database Manager.
Go to Tools > Database > Database Manager
Select the RLC Components tab
Click the Add button to add a new definition. Note, the definition will appear for all components of the same type. Also watch out for the polarity of capacitors and other components where relevant.
Garret
Senior Software Developer
National Instruments
Circuit Design Community and Blog
If someone helped you, let them know. Mark as solved or give a kudo. -
I have a client that would like an e-commerce site for her
business. I've searched various e-commerce web building sites and
have found that the templates used are not sufficient nor
attractive for me or the client.
I like to do a lot of my web building using Dreamweaver 8,
Frontpage, and Publisher. I would prefer to use Dreamweaver 8 and I
have been searching tutorials, manuals, forums, etc. trying to find
an answer.
I'm not the "best" person when it comes to web designing, so
therefore I would prefer an almost Step-by-Step Guide that I can
read. Money is very scarce so going out and purchasing books or
software really isn't an option as well.
Can someone knowledgeable in this PLEASE, PLEASE help. I have
been working on this for a week now. I need an answer ASAP as the
site needs to be built and ready to be uploaded in 3 days.As time is of the essence, at this point, I would recommend
using a prebuilt
cart .. if there aren't too many products, you can use
something like the
PayPal shopping cart, which is free and there are
instructions on the paypal
site for getting started.
Also see if your host has a shopping cart included .. many
have a simple one
already included with your package.
Nancy Gill
Adobe Community Expert
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: Dreamweaver CS3: The Missing Manual,
DMX 2004: The Complete Reference, DMX 2004: A Beginner's
Guide
Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development
"NoonieB" <[email protected]> wrote in
message
news:f60kt6$rlc$[email protected]..
>I have a client that would like an e-commerce site for
her business. I've
> searched various e-commerce web building sites and have
found that the
> templates used are not sufficient nor attractive for me
or the client.
>
> I like to do a lot of my web building using Dreamweaver
8, Frontpage, and
> Publisher. I would prefer to use Dreamweaver 8 and I
have been searching
> tutorials, manuals, forums, etc. trying to find an
answer.
>
> I'm not the "best" person when it comes to web
designing, so therefore I
> would
> prefer an almost Step-by-Step Guide that I can read.
Money is very scarce
> so
> going out and purchasing books or software really isn't
an option as well.
>
> Can someone knowledgeable in this PLEASE, PLEASE help. I
have been
> working on
> this for a week now. I need an answer ASAP as the site
needs to be built
> and
> ready to be uploaded in 3 days.
>
Maybe you are looking for
-
Message processing failed, FTP Receiver Adapter error...
Hello all, We have a Idoc to File(FTP) scenario using PI. When PI try to send the file out to the FTP site, we get the following message in the communication channel monitoring and the file never reach the FTP site: Message processing failed. Cause:
-
We have a Toshiba A505-S6980. The other night my girlfriend was working on a paper when the screen went black mid typing. She took the battery out and turned the computer back on. Viola the screen worked, then the next night it did the same thing, th
-
Internet issues, not seeing a thread like it
So I've had my touch since launch and internet has been great. Although past 2 weeks I cannot connect to the internet at my house nor my friends house, only place i've been with it. It finds my router and says I have full wifi, although when i go to
-
I have Photoshop CS6 Extended. I just want to do something like this. http://prntscr.com/2tk258 However, when I swipe across the text, NOTHING happens. I've been tearing my hair out for the past hour trying to find a reason and I am not able to. Here
-
Hi, I tried to change Base UOM for material in mass maintenance using MM17 but it gave me error when I execute it. The error msg say I need to remove stock from current and previous period but I don't understand this msg, can someone explain to me?