Re: Rose vs Select Enterprise vs Paradigm Plus vsObjectTeam?

We are using Rose 4.0 for Forté and are quite happy with it. The Forté
Add-In for Rose98 is currently in beta test according to Rational
officials.
Nikola Filipovic wrote:
>
Which CASE Tool should one use?
Is it true that Rational will not support any more Rose for Forte?
Has any body used Select Enterprise for Forte v6.0?
Any feedback, hints, suggestion or experiences?--
Dr. Thomas Kunst mailto:[email protected]
sd&m GmbH & Co. KG http://www.sdm.de
software design & management
Thomas-Dehler-Str. 27, 81737 Muenchen, Germany
Tel +49 89 63812-221 Fax -444
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Similar Messages

Rose vs Select Enterprise vs Paradigm Plus vsObjectTeam?

Which CASE Tool should one use?
Is it true that Rational will not support any more Rose for Forte?
Has any body used Select Enterprise for Forte v6.0?
Any feedback, hints, suggestion or experiences?
Thanks in advance,
Nikola Filipovic
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

cfr wrote:
Welcome to the forums.
Have you tried uninstalling xf86-input-keyboard? If you want evdev to handle it, that is.
Does the keyboard work when you decrypt the encryption device (or maybe you use a keyfile)?
Does it work if you boot to the command line?
Is the keyboard hook included in the initramfs? (Though I don't think this should matter for later.)
first place, tnx for the answer and sorry cause it took too long for me to answer back.
I uninstalled xf86-input-keyboard. now i get an error at boot time but it passes to arch so no big deal.
About encryption device I have no idea cause i never chose to encrypt anything.
About working at command line, answer is no. It is not working in my bash and also at tty1.
about keyboard hook, Answer is yes, it is included.
I'm really enjoying my systems speed with arch but this problem is really killing me. Now i'm using my laptop like a PC no movement allowed cause I must take a keyboard with me.
and really, an active forum and just one answer to my question!

Anyone using Select Enterprise for Forte?

Subject says it all. We're contemplating using eith Select or Rational
Rose.
Thanks in advance
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Raymond captured my thoughts exactly. We were Select customers too and glad
to be Rational customers now.
-Martin
Raymond Blum <[email protected]> on 03/04/99 11:30:56 PM
Please respond to Raymond Blum <[email protected]>
Reom
To: [email protected], [email protected],
[email protected], [email protected]
cc:
Subject: RE: Anyone using Select Enterprise for Forte?
We were Select customers for a year and have switched to Rose. Select was
both a buggy tool and a buggier company! Their upgrade to V6 completely
changed the server requirements, pulling the rug out from under our feet.
Features we were promised were not in the releases we were sent...
Rose has been a godsend; the product has it's shortcomings but it is a level
above Select in both functionality & robustness.
The 3 times I've had to contact Rational tech support, they've been able to
provide me with a solution. Select's tech support were unable to get their own
product to work as advertised. ---Raymond
We have been using Select for over 2 years but have kept a watchful eye on
Rationals offering.
They seem to leap frog each other and have various pros and cons. My
personal bias is currently towards Rational Rose but you'll have to choose
based upon your own needs.
If you let me know what you need I can let you know what I think each tool
offers.
Cheers,
Jez
Jez Sygrove
Application Architect
PanCredit
PS* Standard disclaimer: The opinions I express are not necessarily those of
my employer.
From: Robinson, Richard[SMTP:[email protected]]
Reply To: Robinson, Richard
Sent: 03 March 1999 18:29
To: '[email protected]'
Subject: Anyone using Select Enterprise for Forte?
Subject says it all. We're contemplating using eith Select or RationalRose.
Thanks in advance-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
Sent from my PalmPilot.
The best thing since the Mac Plus!
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

SELECT Enterprise

I was wondering if there was anyone out there who has used SELECT Enterprise
or Rational Rose for object modeling, etc. If so, how would you rate the
two or which one would you recommend using. Also, has anyone ever had any
training by SELECT either in just using their Tookit or OO Analysis and
Design or both? Thank you.

From: Stephen McHenry <[email protected]>
Subject: Re: SELECT Enterprise
Reply-to: Stephen McHenry <[email protected]>
At 08:20 AM 3/14/97 -0500, you wrote:
I was wondering if there was anyone out there who has used SELECT Enterprise
or Rational Rose for object modeling, etc. If so, how would you rate the
two or which one would you recommend using. Also, has anyone ever had any
training by SELECT either in just using their Tookit or OO Analysis and
Design or both? Thank you.I responded to your earlier question in the newsgroup (in kind of a
light-hearted way), but in light of your question above, I wanted to give a
more personalized response. I would HIGHLY recommend the Forte OOA&D course
over any OOA&D course taught by a case tool vendor, IF you are planning on
successfully deploying projects in Forte. If you just want to learn general
OOA&D, with a focus on that particular case tool, then the vendor course is
probably fine.
Why do I say this? Well, first my assumption is that your management will
not pay for you to attend two OOA&D courses. If they will, fine - take
both. If not, you are now faced with which course will help you more *for
your particular goal*, which presumably is building Forte applications. I
can definitively answer that and the answer is the Forte course.
In that course, we teach general OOA&D principles that you would learn in
the case tool vendor's course. We also spend significant time examining
many of the subtleties that many OO designers with years of experience
don't even seem to be aware of (based on their comments if they come
through our course). I have had people that have been through training by
places like Lockheed Martin (Advanced Concepts Center), Rational, etc.,
plus people that have been through case tool vendor training, plus people
that have been through hardware vendor training in OO (HP, Sun, etc.) and
uniformly they say that this course covers more OO issues in more depth
than any of the other courses they have attended. These comments only
apply, of course, to the material that both courses covered. I have no
opinion on this, as the original version of this course was created prior
to those courses existing, and I have not attended any of them. I DO,
however, look to see what is offered (table of contents) by them in an
effort to keep the course addressing relevant issues (also, sort of a
competitive analysis - I want it to be the BEST course possible), and they
don't cover any topics that we don't.
Stephen -- appreciate your response on these questions as I know you know your
stuff. Having helped Select out on some training however I think regardless of materials
some instructors likely fill in alot of gaps if it is relevant and in my case at least
make sure if they are a Forte customer they have the additional customized content that
is appropriate. Of course, there is a limitation of time as with any course.
Now, let's turn to the material that they don't both cover. The Forte
course will talk about a number of Forte specific design issues. These
topics will not be covered in a case tool vendor course because they aren't
teaching you about Forte, only about their tool. If you could find one,
another course about Forte might have the same information but, to my
knowledge, there are no other publicly available courses on Forte. These
conscept include developing three-tier architectures, load balancing, fault
tolerance, minimizing contention on shared objects, communication between
threads, race conditions, deadlocks, independent transactions, dependent
transactions, nested transactions, transactional objects, mutex and
transactional locks, forte events and event loops, translating your object
model into a relational table structure, maximizing the benefits of
polymorphism and lots more that I could talk about. Much (if not all) of
this is completely unique to building applications in a distributed
environment, and most of that is quite specific to Forte. And, these are
issues that DO make a difference as you build applications using Forte.
Unfortunately, all OOA&D courses were NOT created equal. I will venture to
say that you can't get this much in one week ANYWHERE else.
I'll get off my soapbox now. If you have any qestions, please feel free to
contact me directly.
Originally, I was going to send this as a private response, but I decided
to post it because I'm an egotistical maniac, and others might be
interested too. (Actually, the latter wasn't of much concern to me... :-)
Stephen
|======================================================================|
| Stephen McHenry Phone: (408) 776-2720 x220 |
| Advanced Software Technologies |
|======================================================================|
For the rest of the group who don't know Stephen I will second the value of a class
he develops and teaches. IMO, some clients taking these other OO A&D courses,
usually oo modelling vendor-specific regsiter students where some work on Forte,
some come from the db angle for generation of ddl, some come from tools like Delphi
or PowerBuilder. In these cases they justify the other course over the Forte one
due to having only part of the audience being interested in the Forte-related aspects.

How do you change the minus symbol on the quick selection tool to a plus symbol? im finding it difficult to select an area.

how do you change the minus symbol on the quick selection tool to a plus symbol? im finding it difficult to select an area.

You can use the Alt/Option key to toggle between add + and subtract -
http://helpx.adobe.com/photoshop/using/making-quick-selections.html
First though select the Add to Selection in the tool options bar for that to work.

I selected "ACC Encoder-iTunes Plus" for import settings to import cd's. I assumed music purchased from the iTunes Store was mp3 format.Which is it?

I selected "AAC-iTunes Plus" as my import settings when importing CD's to my iTunes library. When I reviewed "get info" on purchased songs from iTunes, it says "Kind: Purchased AAC audio file". All of the purchased songs in my library say this. I assumed all purchased songs were "automatically" imported in mp3 format. Do the import settings I chose also apply to purchased music? Also, what can I do to have my library songs changed to mp3 format?

All songs sold in the iTunes Store are AAC/256.
The import setting affects ripping and conversion. It has nothing to do with purchases from the iTunes Store.
If you need MP3s, you can convert your AACs by using this procedure: http://support.apple.com/kb/HT1550 But it would be easier to buy MP3s in the first place, for example from Amazon MP3.
MP3s can be used in iTunes or almost any other player, program or device.

Enterprise manager & sql* plus login failed

hi
this is the problem i encountered yesterday:
there are server_3 and rs_16 machines which are in D1 domain and server_1 in W1 workgroup. server_3 and rs_16 has no oracle software whatsoever and on server_1 8i database exists. other machines with 8i clients, all in D1 domain, succesfully connect to server_1.
i installed 10g database on server_3 machine; after installation i created a database db1. after the database was created, i tried to start enterprise manager (EM) and it failed (the database is not mounted ....), and i found out that tns listener wasn't created during the installation. so i created tns listener and started EM again and browser showed the proper page (username and login). so i entered sys as username, pswrd (created during the installation) and connect as sysdba. when i clicked on login button, the page refreshed but nothing happened, the same page (login) was still opened. i tried to connect from rs_16 and the same thing happened. this happened using internet explorer for opening EM. i tried to login as system, sysman but all in vain.
then i installed 10g on rs_16, created db2 database and found out that tnsnames.ora file was missing. created db3 as well, and all went ok. started EM, tried to login and the same thing happened as on server_3, browser just refreshed the page.
also have to say that i tried to connect to databases using sql* plus and login also failed.
also tried using administration assistent for windows and tried to connect to db3. when i tried to connect as sys acount (database authentication) login failed, but when i used os authentication i succeeded.
then i tried to start EM from another machine rs_13 (D1 domain) using internet explorer and i succeeded, there was no problem at all. after all, i installed mozilla firefox (1.0.6) on rs_16 and succesfully started EM for any database i wanted. but have to mention that i still can't connect to any db using sql* plus.
rs_13 setup:
- win 2000 + sp4
- ie 6.0.2600.0000IC
and rs_16:
- win xp + sp2
- ie 6.0.2900.2180.xpsp_sp2
server_3:
- windows server 2003
on every machine i was logged in as top administrator so i had any possible permission.
could anybody answer these questions:
1. why tnsnames.ora wasn't created?
2. why tns listener wasn't created?
3. why couldn't i start EM using ie on server_3 and rs_16 and could on rs_13?
4. why did login fail using sql* plus and why can't i still connect to any db using sql* plus? is it a problem of assigning some privileges or something else?
5. why did login fail using database authentication while succeeded using windows authentication in administration assistent for windows? what should i do to make it succeed? is this all problem due to ie browser, win security or oracle security?
6. why microsoft is giving me a hard time with their security?
thanks for help in advance
hope this post will help someone else as well !!
Message was edited by:
uncle carmine
Message was edited by:
uncle carmine

could anybody answer these questions:
1. why tnsnames.ora wasn't created?
2. why tns listener wasn't created?I think you cancel Network Configuration Assistan which would create tnsnames.ora and listener. I hope others help you with the other questions I have plenty of work
Best Regards
Krystian Zieja / mob

PL/SQL cursors vs. SQL*plus Select statement

Hi folks, hope you're doing well,
Here is a question that kept me wondering:
Why would I use cursors when i can achieve the same thing with a SQL+ Select statement which is much easier to formulate than a cursor (e.g. you need no declaration, loops etc)?.
Thanks so much,
-a

There is no such thing as a SQL*Plus SELECT statement. The SELECT command is part of the SQL Language - not part of the SQL*Plus (very limited small vocabulary) macro language.
All SQL SELECTs (from client languages) winds up in the SQL Engine as SQL cursors. A SQL Cursor is basically the:
- SQL source code
- SQL "compiled" code (instructions on how to fetch the rows)
On the client side, client cursors (not to be confused with SQL cursors) are used. A client cursor is created in the client language when it makes SQL calls via the database client driver (called the OCI/Oracle Call Interface for Oracle clients).
Typically this is what a client does. It makes a connection to the database and gets a database handler in return. The database handler is the "communication channel" from the client to the db. In Oracle, the database handler in the client refers to the Oracle session (for that client) on db server.
A SQL statement (source code) is used by the client. This can be a SELECT statement you type in at the SQL*Plus command line. It can be a SELECT statement for the PL/SQL cursor command in a stored procedure.
The client creates a SQL handle for this SQL statement, by calling the Oracle client driver. Note that this SQL handle is a client handle - a client cursor for that SQL statement.
E.g.
a) sqlHandle = CreateSQL( databaseHandle, 'SELECT ... FROM ...')
b) sqlHandle.Parse
c) sqlHandle.Execute
After the SQL handle (client cursor) has been executed, the client can fetch rows from it.
This is what SQL*Plus does automatically for you, without you having to write the code to do it. SQL*Plus CONNECT command create a database connection handle. You enter a SELECT statement and SQL*Plus creates a SQL handle (client cursor), executes it, fetches from it, displays the rows, and closes the SQL handle when done.
The same applies to PL/SQL. You can use a SELECT statement just like that in PL/SQL. E.g.
declare
i integer;
begin
select count(*) into i from emp where deptid = 123;
end;This is called an implicit cursor. PL/SQL creates (just like SQL*Plus) an implicit client cursor. It creates and disposes of that client SQL handle for you - you do not need to do it.
Or, you can create an explicit cursor. E.g. declare
cursor c is select count(*) from emp where deptid = 123;
i integer;
begin
open c;
fetch c into i;
close c;
end;The question as to when to use implicit (client) cursors versus explicit (client) cursors depends on your requirements. Do you need to cycle through the results of the SQL? Etc.
And keep in mind that in either case, the SQL Engine creates a SQL cursor anyway on its side.

SQL*Plus Worksheet in Personal Oracle 8.1.6

Why does a select query in SQL*Plus Worksheet not return any results, but the same query in SQLPLUS or TOAD does?
I am using the version that comes with Personal Oracle8i for NT (Oracle 8.1.6). Version of Enterprise Manager is 2.1.0.1.0.
Database is Oracle8i Enterprise 8.1.5.

What is the query you have given?
Is it happening for all the queries or only for this one.
Please reply.
Regards
Ravi

Push Notifications and Enterprise

Hello there,
We have been upgraded from woodwing to Adobe DPS last month.
We are slowly getting back to the way it was before and know that some features will come in future updates.
There is only 1 thing I don't get or could find any documentation for was Push notifications on a enterprise build.
We have the app build for enterprise, but the mobileprovsion requires a app ID with a asterix(*) in it.
Apple sees this as a wildcard and thus I cannot configure the Push Notifications for the provisions.
So that is not really a big deal, cause we always have 3rd party options.
Now I noticed that the viewer builder gives you the option for Apple push and adobe push, and a custom url.
But whenever I choose the option above that saying its a 'Enterprise Build' I cannot check the Push buttons.
I cannot setup any Push at all.
So does anybody know how to setup push notifications for a enterprise build app, or have any Documentation on how to set it up?
Kind Regards,
Patrick van Zadel

Hi Bob,
The Publishing Companion Guide (for Viewer Builder 2.1) outlines the steps to produce the required Apple APN certificates. However, as Patrick points out, the latest viewer builder does not allow one to configure push notification support for Enterprise signed viewer apps. Essentially, once one selects Enterprise viewer, the Push Notification fields are disabled. See the screenshot below...
What is the recommended way to enable this for Enterprise builds?
Thanks for your help,
Matt

In Dreamweaver CC code view, how do I reenable shift-control+arrow keys to select words?

In previous versions of Dreamweaver (for Windows but presumably for other operating systems as well) and in pretty much any other text editor (except maybe for vi/m but including the one I'm using to write this message in now). I can select characters using shift plus the arrow keys and select words by pressing shift-control plus the arrow keys. It seems you now have to use shift-alt to select words. I don't want to have to undo about 25 years of habit just for Dreamweaver.
Please say this is an easy setting I can uncheck somewhere! Thanks!

That is an issue that has come up a lot lately...
Make sure to add your voice to the others here: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform and hopefully in the next release they'll put it back to normal.

HP Laserjet 4 Plus printer driver

I need a compatible printer driver for HP Laserjet 4 Plus printer. I have Windows 7 - 64 bit.

The Laserjet 4 Plus driver is supplied through Windows Update for Windows 7. You can do the following: click Start, Devices and Printers, Add a Printer, select the correct port, Next, then select Windows Update, then select HP as the manufacturer and select the Laserjet 4 Plus.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Not all songs in album upgraded to iTunes Plus

I have many tracks that weren't upgraded after selecting "Upgrade to iTunes Plus" (actually, hundreds of them). I understand that not all tracks are currently available. Oddly, 3 tracks from the Aerosmith album "Big Ones" were not upgraded, yet all of the other tracks were. I have many other albums that show iTunes Plus eligibility in the iTunes Store, but were not upgraded. There does not seem to be any way to check for additional upgrades (the option disappeared from the iTunes main screen after upgrading). It sounds like there are many of us out there with the same type of issue. What is the deal?

Apparently sometimes, for various reasons (replacement of a track in the Store with another copy, slight changes in the release identification, etc.) the link between the track and your Purchase History can break, which will result in the track not appearing as eligible for iTunes Plus upgrade even though it exists as Plus in the Store.
Contact the iTunes Store Customer Service department using the form at the bottom of the Purchase Issues FAQ web page (there is no category specifically for this issue, so I'd suggest just picking one under the Purchases - problem area) and explain the problem to them. It may take a couple of email exchanges to get past the "form" email responses, but eventually they should work out a solution for you. You may need to provide the track name, artist and order number so they can confirm the original purchase.
Regards.

Enterprise Manager is not opening.

Hi ,
I have installed SOA Suite 11.1.7 withpur any error.
I have started web logic server without any issue . But when I am trying to open EM CONSOLE , i am getting following error   -
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this INFORMATION available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
Could you please help me with this ?
SOA suite -11.1.7
JDEv - 11.1.7
DB - 11G
Java 7
Weblogic server - 10.3.6.0
OS - windows 8.@

Hi,
1)Could you please login to Weblogic Console and Goto Deployments -----> Check if EM application is listed in the Deployments.
2)Incase EM Application doesn't show up then could you please follow the below steps to include EM application :-
    + Goto %MW_HOME%/wlserver_10.3/common/bin
    + Invoke the command ./config.sh ( Linux ) or config.cmd ( Windows )
    + Select "Extend domain" when GUI Comes up.
    + Click on next , Select your SOA Domain , in the Components page select "Enterprise Manager" Component and click next , Click on Extend to include EM in your SOA Domain.
    + Once the application is deployed then Go to Weblogic Console , Deployments and select "EM Application" ----> Select "Server all requests" and see that EM comes to Active state.
   + Access the EM application once the above steps are performed and let us know the result.
Regards,
Prakash.

Can't I/O select a keyword clip?

I have a bunch of clips in an event. I have gone through these clips making selections and assigning keywords to the selections (such as "man plus car" or " happy face". In some cases I have assigned keywords to the whole clips too (such as "day 1"). Some selections I have assigned two or more keywords (eg "man and car", "happy face") and the selection might be within a whole clip with an assigned keyword or within a larger selection with an associated keyword.
I presume all that is quite standard. I can now click on a single keyword in the event list and see all clips associated with that keyword - including some clips that might be associated with other key words as well as the one I selected.
So, I click on a keyword (happy face) and see a list of clips. I then select a clip , play it through and decide I want just a few seconds in the middle. I can't make a selection. When I try to drag a yellow box the clip selection changes to the first clip in the list. Using I and O key commands does not work properly either. If I try to edit the resulting yellow box then the same thing happens: suddenly my clip changes selection to the first clip in the list.
I find this really odd. Can anyone work out what I am either doing wrong or what I need to do to sort things out? (Delete prefs?)
This weird behaviour has also lead to crashing of fcp and usual error reporting to apple.
I'm editing native hdv on a three year old macpro with latest OS and fcp x. 16GB memory and non raid internal sata disks.

Thanks for the response.
I have trashed prefs and its no different. I have also repaired permissions for good measure.
I think I have honed down the issue:
Take a long(ish) clip and assign a key word to the whole thing (eg: wholething)
Make three (say) short selections in the clip and give them each the same key word (eg : smile)
Now in the event library you should see two key word entries for wholething and smile. Click wholething and you will see a single clip in the clip list; click smile keyword and you will see three clips in the clip list. All fine.
Problem:
In List View (it has to be list view!) and with your smile keyword selected in the event library, try clicking on the third clip down. you'll see a film strip thing at the top, fine. now try making a selection. It first appears to work but as you release your mouse or when you press "I" (or "o") the first clip in the list becomes selected and your filmstrip preview changes to reflect this. Also that first clip reveals its associated keywords (which would be both smile and wholething) and the keyword wholething is selected. (as opposed to the parent clip title)
If I click the clip I was trying to work on, my selection is in fact in place and I can press E, W, Q to make an edit etc. But I have to click on that clip to get it selected again!
It works like this every time for me.
It works perfectly fine if I am using filmstrip view. I can select portions of any clip by dragging the mouse or using I/O keys. I can then just press E,W etc to make an edit.
Note: If I remove the all encompassing keyword "wholething", then making selections in keyword clips "smile" works as it should.
It seems you cannot have a keyword encompassing other keywords, if you want things to work properly.
FWIW I am working this way as I have placed the keyword "interview" on every (camera) clip that is interview footage. I have then selected "interview" in the event browser and gone through the clips marking subjects of discussion. these subjects areas were marked pretty roughly and I might only need a few words from one subject on my timeline. I want to select parts of the keyworded clip before updating my timeline (sorry, I mean "project" -ha)!
I hope all this makes sense!

Re: Rose vs Select Enterprise vs Paradigm Plus vsObjectTeam?

Similar Messages

Maybe you are looking for