RE:RRI Checks how to get the data my reports.
Hi,
I have two reports overview&Detail reports.When i execute overview report i am getting the data.in the same report i am integrated the detail report.when i am trying to open detail report in overview report i am not getting the data it shown the error No Data Available. But data is there in Detail report when i execute individually.
i Did the RRI Checks also,
Pls help me how to get the data in detail reports and also give me the steps which i have follow.
Regards
Som
HI All
Let me rephrase my Question
I have an overview report and a detailed Report Both of them are working fine individually. But when i link them using RSBBS the detailed report is not giving any data. it gives "no Data available". There is no assignment details maintained. it is having the default value. (generic and *)
please let me know what might i be missing
Regards
D
Similar Messages
-
How to get the date of the last transaction in a mounted standby database?
Hello,
Could you tell me how to get the date of the last transaction recorded in a MOUNTED standby database?
The following query doesn't work...because the database is not open...
select scn_to_timestamp(current_scn) from v$database;
ThanksHi,
You should be able to run the following command in mounted mode on standby database.
select current_scn from v$database;
then run the following to convert it to timestamp.
select scn_to_timestamp(99999999) from dual; *<-- Replace here the SCN value you got above. This needs to be run on the primary database due to standby database in mount mode.*
Alternatively you can also check at the alert.log file to find the last scn which has been applied.
Regards
Edited by: skvaish1 on Jan 19, 2010 11:15 AM -
How to get the date in 01-jan-2008 format
hi
how to get the date in 01-jan-2008 formatCheck this example of how to get this format..
TABLES: T247.
DATA: V_DATE TYPE SYDATUM.
DATA: V_STRING(20).
V_DATE = SY-DATUM.
SELECT SINGLE * FROM T247
WHERE SPRAS = SY-LANGU
AND MNR = V_DATE+4(2).
IF SY-SUBRC = 0.
CONCATENATE V_DATE+6(2) '-' T247-KTX '-' V_DATE(4)
INTO V_STRING.
WRITE: / V_STRING.
ENDIF.
or
make use of this FM
CONVERSION_EXIT_IDATE_OUTPUT
and see its documentation.
or
/: SET DATE MASK = 'DD-MMM-YYYY'
&DATE&
check with this.
if it is not working try to give space between DD and MMM and YYYY
all of the three work...choose whichever suits u
eg2:
Use FM:CONVERSION_EXIT_IDATE_OUTPUT
Check this Program.....
DATA:DATE TYPE D VALUE '20070912'.
DATA:DATE2(12) TYPE C.
DATA:FINAL_DATE(15) TYPE C.
CALL FUNCTION 'CONVERSION_EXIT_IDATE_OUTPUT'
EXPORTING
INPUT = DATE
IMPORTING
OUTPUT = DATE2.
CONCATENATE DATE20(2) '-' DATE22(3) '-' DATE2+5(4) INTO
FINAL_DATE.
WRITE:FINAL_DATE.
Eg:3
use FM MONTH_NAMES_GET by passing month_names-spras = 'E'
it will return the Mont names in month_names-KTX ( 3 cha short name ) & month_names-LTX ( Long text ). then concatenate 'DD''-' month_names-KTX & 'YY'
reward points if useful -
How to get the data from multiple nodes to one table
Hi All,
How to get the data from multiple nodes to one table.examples nodes are like A B C D E relation also maintained
Regards,
IndraHI Indra,
From Node A, get the values of the attributes as
lo_NodeA->GET_STATIC_ATTRIBUTES( IMPORTING STATIC_ATTRIBUTES = ls_attributesA ).
Similarily get all the node values from B, C, D and E.
Finally append all your ls records to the table.
Hope you are clear.
BR,
RAM. -
How to get the data from pcl2 cluster for TCRT table.
Hi frndz,
How to get the data from pcl2 cluster for tcrt table for us payroll.
Thanks in advance.
Harisumanth.ChPL take a look at the sample Program EXAMPLE_PNP_GET_PAYROLL in your system. There are numerous other ways to read payroll results.. Pl use the search forum option & you sure will get a lot of hits..
~Suresh -
How to get the data from Pooled Table T157E.
Hi Experts,
How to get the data from Pooled Table T157E.
Any help.
Thanks in Advance,
Ur's Harsha.create some internal table similar to T157E and pass all data as per SPRAS.
After that use internal table in your program as per the requirement.
Regds,
Anil -
How to get the data from mysql database which is being accessed by a PHP application and process the data locally in adobe air application and finally commit the changes back in to mysql database through the PHP application.
If the data is on a remote server (for example, PHP running on a web server, talking to a MySQL server) then you do this in an AIR application the same way you would do it with any Flex application (or ajax application, if you're building your AIR app in HTML/JS).
That's a broad answer, but in fact there are lots of ways to communicate between Flex and PHP. The most common and best in most cases is to use AMFPHP (http://amfphp.org/) or the new ZEND AMF support in the Zend Framework.
This page is a good starting point for learning about Flex and PHP communication:
http://www.adobe.com/devnet/flex/flex_php.html
Also, in Flash Builder 4 they've added a lot of remote-data-connection functionality, including a lot that's designed for PHP. Take a look at the Flash Builder 4 public beta for more on that: http://labs.adobe.com/technologies/flashbuilder4/ -
How to get the date of first day of a week for a given date
Hi gurus
can any one say me how to get the date of first day(date of Sunday) of a week for a given date in a BW transformations. For example for 02/23/2012 in source i need to get 02/19/2012(Sunday`s date) date in the result. I can get that start date of a week using BWSO_DATE_GET_FIRST_WEEKDAY function module. But this function module retrieves me the start date as weeks monday(02/20/2012) date. But i need sundays(02/19/2012) date as the start date. So it would be really great if anyone sends me the solution.
Thanks
RavHi,
The simplest way would be to subtract 1 from the date date which you are already getting in transformation routine, but instead of doing that subtraction manually which might need bit of errort, you can simply use another FM to subtract 1 from given date.
RP_CALC_DATE_IN_INTERVAL
Regards,
Durgesh. -
How to get the date for the first monday of each month
Dear Members,
How to get the date for the first monday of each month.
I have written the following code
SELECT decode (to_char(trunc(sysdate+30 ,'MM'),'DAY'),'MONDAY ',trunc(sysdate+30 ,'MM'),NEXT_DAY(trunc(sysdate+30 ,'MM'), 'MON')) FROM DUAL
But it look bith complex.
Abhishek
Edited by: 9999999 on Mar 8, 2013 4:30 AMUse IW format - it will make solution NLS independent. And all you need is truncate 7<sup>th</sup> day of each month using IW:
select sysdate current_date,
trunc(trunc(sysdate,'mm') + 6,'iw') first_monday_the_month
from dual
CURRENT_D FIRST_MON
08-MAR-13 04-MAR-13
SQL> Below is list of first monday of the month for this year:
with t as(
select add_months(date '2013-1-1',level-1) dt
from dual
connect by level <= 12
select dt first_of_the_month,
trunc(dt + 6,'iw') first_monday_the_month
from t
FIRST_OF_ FIRST_MON
01-JAN-13 07-JAN-13
01-FEB-13 04-FEB-13
01-MAR-13 04-MAR-13
01-APR-13 01-APR-13
01-MAY-13 06-MAY-13
01-JUN-13 03-JUN-13
01-JUL-13 01-JUL-13
01-AUG-13 05-AUG-13
01-SEP-13 02-SEP-13
01-OCT-13 07-OCT-13
01-NOV-13 04-NOV-13
FIRST_OF_ FIRST_MON
01-DEC-13 02-DEC-13
12 rows selected.
SQL> SY. -
How to get the Date in a particular format?
Hi,
How to get the Date in the below format? I will be passing the year in my method..
2/10/2003 9:46:52 PM
D/M/YYYY H:M:S A
public Date getDate (String year) {
Here i want to get the Date in this format
2/10/<Passed Year> 9:46:52 PM
ThanksThis is my code
public static Date getCalendar(Calendar calendar,int getYear) {
String formatted_date="";
int year = getYear;
int month = calendar.get(Calendar.MONTH+1);
int day = calendar.get(Calendar.DATE);
int hour = calendar.get(Calendar.HOUR);
int min = calendar.get(Calendar.MINUTE);
int sec = calendar.get(Calendar.SECOND);
int am_pm =calendar.get(Calendar.AM_PM);
formatted_date = month+"/"+day+"/"+year+" "+hour+":"+min+":"+sec+" PM";
System.out.println("formatted_date is "+formatted_date);
o/p : formatted_date is 1/4/2006 1:44:21 PM
SimpleDateFormat dateFormat = new SimpleDateFormat("dd/MM/yyyy");
// DateFormat dateFormat =DateFormat.getDateTimeInstance(DateFormat.SHORT, DateFormat.SHORT);
Date passdate = new Date();
try {
passdate = dateFormat.parse(formatted_date);
} catch (ParseException e) {
System.out.println("Invalid Date Parser Exception "+e.getLocalizedMessage()+"DateFormat is "+dateFormat);
System.out.println("The Date inside the function is "+passdate+"and the year passed is "+year);
o/p : The Date inside the function is Sat Apr 01 00:00:00 IST 2006and the year passed is 2006
return passdate;
Expected O/P is 3/1/2006 1:44:12 PM
} -
How to get the data from multiple tabes into single table
hi all,
here i am having 10 data base tables,how to get the data into a single table.
regards,
subba reddyhi,
non XI/PI related
Regards,
Michal Krawczyk -
How to get the date starting from 1 to the current date from the system dat
Dear all,
Please tell me how to get the date starting from 1 based on the system date
and it should come with respect of time also.
example.
suppose today is 6 Dec, 2006
so ABAP report should find the 1 dec. 2006.
Please help me as soon as possible.
Regards,concatenate sy-datum0(2) '01' sy-datum4(4) into v_firstdate.
or yo ucan use the fm:
HR_JP_MONTH_BEGIN_END_DATE
usage:
call function 'HR_JP_MONTH_BEGIN_END_DATE'
exporting
iv_date = sy-datum
importing
ev_month_begin_date = gv_begda
ev_month_end_date = gv_endda.
Regards,
Ravi
Message was edited by:
Ravi Kanth Talagana -
How to get the data of Open Opportunities and Closed Opportunities
Hi Guys,
i'm studying about Sales Opportunities in SAP BusinessOne.
i'm able to get the data about Sales Opportunities(i enterd), Opportunities Report and Lost Opportunities.
But i dont know how to get information about Open Opportunities Reports and Closed Opportunitiesn Reports.i'm unable to find even their names of tables.
plz send a reply.................
with regards,
santhThanq Alexey for ur Helpful Answer,
i'm aware about execution of a query in the Query Analyzer of SQL Server.but i dont know how to move to ShowDebugInformation Menu.
can i find it in the SAP Business One Tool. or do i need
to check any data base help given by B1(Ex:- REFDB2004).
plz give answer for this also............
with regards,
santh -
How to get the data from RFC ?
Hi,
I am using the Import Adaptive RFC Model, where the RFC display the amatrial Information date.
But when I deploy the application I am not getting the data.
How to test the bindings are correct as well as is any lines of code has to be written in the Implementation part?
Please suggest
regards,
CSPHi,
First, drag and drop the Z<RFCNode>_Input node from model to custum controller.
From there, u can select both input and output parameters.
After that, Make sure that In custom controller's init(), the following code is present
Z<RFCNode>_Input input=new Z<RFCNode>_Input();
wdContext.nodeZ<RFCNode>_Input().bind(input);
Create execute() method in custom controller and in execute method, check whether u added
wdContext.currentZ<RFCNode>_InputElement().set<InputParam>(inputparametervalue); // If any i/p parameter is there. You can set this from view also if u mapped the RFC node to view
wdContext.currentZ<RFCNode>_InputElement().modelObject().execute();
Also check all mappings are done correctly.
After saving all, Call execute() method from view as wdThis.wdget<custcontroller>().execute();
After execute(), u will get the output from node Output, which is inside Z<RFCNode>_Input node.
Regards
Fahad Hamsa -
How to get the data from a table cell
Could somebody suggest me how I can get the data value from a table cell if I set that cell a Double object previously.
Thanks very muchThanks for camickr's information.
And thanks uhrand,
I haven't got it sloved. I am sick on this problem.
I have the methods to let the table editable. My tableModel code is from Sun Tutorial.
It has the code like this:
public int getColumnCount() {
return columnNames.length;
public int getRowCount() {
return data.length;
public String getColumnName(int col) {
return columnNames[col];
public Object getValueAt(int row, int col) {
return data[row][col];
* JTable uses this method to determine the default renderer/
* editor for each cell. If we didn't implement this method,
* then the last column would contain text ("true"/"false"),
* rather than a check box.
public Class getColumnClass(int c) {
return getValueAt(0, c).getClass();
* Don't need to implement this method unless your table's
* editable.
public boolean isCellEditable(int row, int col) {
//Note that the data/cell address is constant,
//no matter where the cell appears onscreen.
if (col < 1) {
return false;
} else {
return true;
* Don't need to implement this method unless your table's
* data can change.
public void setValueAt(Object value, int row, int col) {
if (DEBUG) {
System.out.println("Setting value at " + row + "," + col
+ " to " + value
+ " (an instance of "
+ value.getClass() + ")");
data[row][col] = value;
fireTableCellUpdated(row, col);
if (DEBUG) {
System.out.println("New value of data:");
printDebugData();
public void printDebugData() {
int numRows = getRowCount();
int numCols = getColumnCount();
for (int i=0; i < numRows; i++) {
System.out.print(" row " + i + ":");
for (int j=0; j < numCols; j++) {
System.out.print(" " + data[i][j]);
System.out.println();
System.out.println("--------------------------");
}
Maybe you are looking for
-
See my query and error, see my query and error
hi master sir i use inner query but not run please see my query with error query :========== select accid as acccode,fstatus, case when fstatus=1 then (select sum(drbal) from accbal where substr(accbal.accid,1,length(acccode))=acccode) end what from
-
How can I extend a wireless network with my AirPort Extreme Base Station?
Today I purchased a brand new, dual-band base station to replace my Belkin N router, as I have had a handful of firewall, coverage, and other networking problems in my house lately. First off, I really like this router and it was very easy to setup.
-
Hi, When I try to install on Win XP SP2 Home edition, I get the following error: "ERROR 2006-07-24 17:58:09 MOS-01185 The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NPFMntor' does not exist on the 'localhost' host." 1) NPFMntor.exe
-
Horendous gps with C6, I want to throw my phone in...
I am so freaaking sick of this phone, it is only few months old. I bought it mainly because of disposable keyboard and gps tracking. But gps just does not work. Today I am waling aroudn the city trying to get signal, because I was lost, and nothing h
-
System tray Icon!!!
Hi all, I have created an application. Now i want that application to be converted to an exe and i also want to post that into the system tray. I just need to have an icon in the destop and wen double cliked it has to reach the system tray. On right