Re run the cancelled job

hello experts,
Can anyone guide me how to rerun the cancelled.
Job is created n cancelled by some other user.
Can u let me know how can I rerun this....?
thanks alot for your anticipation

if you want to change user name ,then you can not change user name if job status is Cancelled. even copy also .
So better to run report again from se38 or transaction,use variant ,so it creates job on your user name.
if your job is cancelled again,then you can re run now onwards.
Thanks
Seshu

Similar Messages

  • Re- Schedule the cancelled job

    Hi Experts,
    How to re-schedule the cancelled job.
    Thanks,
    satya

    Hi,
    Goto SM37 and change it click on JOB Menu
    Thanks
    reddy

  • Read Error logs after running the background jobs

    Hi,
    How to read the error logs after running the background jobs. In our scenarion we are running the COHV transaction to release the production orders in background. But we are not finding the error logs after background job. We would like to read the error logs and correct for further processing.
    Kindly suggest.
    Thanks & Regards,
    N. Laxman

    Hi
    you can check the  back ground jobs defined by any user in SM37 and where you can see the spool and job logs as well.
    plz check in your case and revert back
    Regards
    Anupam Sharma

  • Problem while running the scheduled jobs?

    Hi any body know the reasons for this?
    1) one job got cancelled with error "ABAP/4 processor: SPOOL_INVALID_JOB,
    log:
    "The current ABAP program had to be terminated because the ABAP processor detected an internal system error.
    The current ABAP program "RSPPFPROCESS" had to be terminated because the ABAP processor discovered an invalid system state."
    2) second job got cancelled with error "system exception ERROR_MESSAGE    UNCAUGHT_EXCEPTION      CX_OS_DB_UPDATE seems there is some problem in updating the table PPFSTRIGG".  but  PPFSTRIGG is not table it is structure.
    when next execution of these jobs there r working fine.
    no runtime errors

    hi prakash ramu,
    even it is not working. it is directly talking me to spool request..
    i think it is not possible, while ur running the report in background.,
    any how if possible could u pls send me the code...
    thanks
    ramu

  • Need to run the BDC job immediately after XK02 is saved.

    Hi all.
        I have to trigger a batch job (BDC program) after changing the customer thru xk02 TRANACTION.
    I found one exit EXIT_SAPMF02K_001 which checks before saving. But my requirement is job (BDC prog) should run after saving. So I guess its of no use. Do we have any BADI ( method)....?Can you pls let me know how to procede.
    If workflow is the solution...
    I have run the event traces by transaction code swel & sels, I could not find any event triggering to tigger the workflow  ( to perform background task) Do I need to create Change document & BOR for acheiving this thru workflow .
    Cheers,
    sami.

    Hi Neha.
           Thanks for quik turn around. But I need this z program to run after all changes are done in XK02 because I need to use the changed vendor data in the BDC program. This is the exit which triggers before save, so I couldn't get the changed vendor data from database table to use in z program (BDC).
    Hope I am clear.
    Cheers,
    sami.

  • How to run the V3 job?

    Hi,
       Please let me to know how to run the pending V3 jobs.
    Scenario : Inventory controlling extraction
    Regards
    Santhosh kumar N

    Hi,
    In LBWE --> 03:Inventory -->click on Job Control, and click on Start Date, and give your parameters i,e, date and time and also give Periodic values, i.e. ever day or after some hours like that and then Click on Print param then Click Schedule Job. Then check the status in SM37.
    After suceess then check in RSA7. And load data in BW.
    Note: For every day delta loads, you need fix Periodic values, because every day you need not to go LBWE and run manually Immediate option. And also loads will happen in night only. So schedule it and also set Processc hain in BW for Loads.
    Thanks
    Reddy

  • Problem in table locking while running the parallel jobs (deadlock?)

    Hi,
    I am trying to delete the entried from a custom table. If I schedule the parallel jobs, I am getting the following dump while deleting the entries from table. This is happening for custom table ( in CRM system).
    Exception : DBIF_RSQL_SQL_ERROR
    And complaining that, deadlock occured. I am not sure what it is..
    Could you please help me out, how can we solve this issue?
    Thanks,
    Sandeep

    Hello Sandeep ,
    I would suggest you Record based  Lock Objects ,
    take a look at below link...to get a general idea..!
    <link removed>
    Hope it helps,
    Thanks and Regards,
    Edited by: Suhas Saha on Aug 19, 2011 11:27 AM

  • Need to run the rescheduling job V_V2  whenever goods are received

    Hi,
    Whenever Goods are received into the warehouse then the rescheduler program v_v2 need to be run only for that particular material automatically.
    Any help or suggestions would really be appreciated.
    Thanks,
    Sre

    Balaji,
    Thanks for your quick response.
    Currently we are running V_v2 as a background job every night for all the materials.
    But now we need to run it for a material for which goods are received.
    If i run it as background job then it has to be run for a specific set of materials or for all the materials in the plant.
    But my need is whenever I receive Goods through MIGO, I need to run V_v2 automatically for the material for which i received goods.
    Hope its clear now...
    Thanks,
    sre

  • How to select on which server to run the restore job?

    Hello gurus!
    We run OSB 10.4.0.2.0 (Solaris)
    There are several media-servers in configuration one of them is temporaroly unavailable.
    When I issue a restore job on the admin server it tries to be execured on that media server which is unavailable, see the output of lsjob -l:
    admin/3:
    Type: restore 1 item
    Restore to host: istore
    Media file number: 198
    Volume: OSB-CATALOG-MF-000014
    Restore original path:
    To path: /tmp/111
    Scheduled time: none
    State: retryable at 2012/12/12.13:18 ("lsjob --log admin/3" for details)
    Priority: 100
    Privileged op: no
    Run on host: mxdb-fin-2
    Attempts: 0
    I was unable to find any option which may tell OSB to run on istore server. Could you suggest any?

    You could simply take the media server out of service which means OSB won't try to use it. When it is available again, you can put it back in service.
    Or, you could restrict the backup to specific media server and tape drives.
    Donna

  • Need to run the JOB without Ineractive Screen

    Dear All,
    We have written a new ABAP program for executing the Macro background Job and used JOB_OPEN,JOB_SUBMIT and JOB_CLOSE Function Modules to run the JOB from ABAP Program.  We are able to run the JOB successfully for Any other ABAP Programs through the custom program, but when I tried with the same approach to run the Macro job through my new ABAP Program the JOB is throwing an error.
    Error Message is like below
    Job started
    Step 001 started (program /SAPAPO/TS_BATCH_JOB, variant TEST, user ID GKMN3511
    Specify a start time
    Job cancelled after system exception ERROR_MESSAGE
    Point of doubts:
    -- Can we really execute the Macro job through the ABAP program with out any dialogue screen (because when I use the "/SAPAPO/MC8G - Schedule Demand Planning in the Backgroundu201D program in my custom program it pop-ups a interactive screen which I don't want in my ABAP program while scheduling the macro job)
    Regards,
    Raju

    In transaction /sapapo/mc8t --> define the activity that looks at the macro in question
    In transaction /sapapo/ mc8d --> define the job that looks at that activity and a selection iD/aggregation level
    In transaction /sapapo/ts_batch_run --> save a variant pointing to the job defined in mc8d
    you can then run the /sapapo/ts_batch_run job with that variant

  • How to Fetch Cancelled Jobs info along with the Short Dump Text

    Hi Gurus,
    I need to develop a report to fetch the cancelled jobs information for the given period. I also need to display the "Error Analysis" part of the Short Dump if it exists.
    I am able to fetch the Failed Jobs information and the Job log details using the FM "BP_JOBLOG_READ". But I need to show the "Error Analysis Text" on the report , if there is any Short Dump Exists for the Dump.
    Please give me your ideas to fetch the Error Analysis part of the short dump for a given Batch Job Name.
    Thanks in Advance.
    Best Regards,
    Sumalatha

    The dump information is in table SNAP. You could identify which dump you want by the date & time of the failed job - let's hope you don't have more than one dump with the same time. If it is ambiguous you could also compare the program name of the failed step with the program name in the SNAP data.
    The error analysis texts are in table SNAPT keyed according to which error occurred (which is data element code FC right at the start of the first record in the SNAP data). You will have to expand out the includes, and substitute the variable codes using values from the SNAP data. There is standard code to do this that you could copy - see program SAPMS380.
    To find out the details of the SAP process you could run transaction ST22 via the debugger and use the same mechanism.
    best wishes
    Ed
    PS Note these details apply to recent systems I think there may be differences if you go back to before ?2004, but I don't have such a system so can't check. You didn't say what release you have.

  • Not able to run the job with user id - is

    Hello experts,
    We have problem.
    Every day we run the job.
    ( the job contians two programs called  ZTIBCOPRG  and J_5HJSTP  )).
    I would like to know why the above job is running with the user ID TIBCOADM.  Because this user has German settings for the size conversion in program ZTIBCOPRG and we are having some issues.
    We changed the user to TIBCOUSA and the job would not run. 
    We have changed the user back to TIBCOADM.  It is running.
    KINDLY HELP ME WITH YOUR VALUABLE inputs.   YOUR HELP WILL BE HIGHLY APPRECIATED.
    I have checked for both users in AGR_USERS  table.
    The AGR_USERS is the old user and have many roles compared to userid TIBCOUSA.
    WHERE WE NEED TO SEE . IS it authorisation problem or the other user with whom unable to run the job ?
    or is this the error in the program ZTIBCOPRG which is not able to do size conversion and causing some issues.
    Thanks and Regards,

    Hi,
         after running the job with user id TIBCOUSA, it should be in cancelled state as per your comments.
    you just select the cancelled job and type JDBG in command box and enter it takes you to Debug mode.
    There you may get some information where it is failing.
    Sudheer. A

  • I need to run the job  every 8th of the month

    Hello,
    Can you please help me out to run the oracle job every 8th of the month.
    Thanks in advace
    Kind reagrds,
    Nick

    Untested, but I'd say the repeat_interval clause of dbms_scheduler.create_job should be something like:
    'FREQ=MONTHLY;BYMONTHDAY=8;'

  • Downloading the file in our PC , when running the job in Background

    Hi,
    We have an enquiry for below requirment.
    Our client runs some jobs in front end , but as the time taken to execute the JOB is more than 15 minutes  , he is getting timeout problem, so we want to run the same program in background.
    Generally the output of the report is to download the file into his desktop,  so even when he is running
    the same job in background he want it to be downloaded into his PC, instead of application servor.
      We created a test program similar to the requirment, and ran the job in foreground and the file could easily be downloaded to desktop. Then we ran the program in backgound - The job failed with an error message  Codepage could not be determined  - Message no. FES025.
    My Question is - is it possible to download the file into the desktop while running in background.
    Please help me .
    Thanks in advance.
    Vengal Rao.

    Please search the forum. This question has been asked and answered many times before.
    Rob

  • Spool need to create for Batch cancelled job

    Hi Experts,
    How can we display spool for the batch job which has been cancelled.
    I ve executed alv output in background job. But, some condition is not satisfied, so it has been terminated( job is cancelled).  I need spool for the cancelled job.
    any suggestions.
    Thanks
    GR

    HI Kiran,
    I have created program with ALV grid output, that they are running in background.
    Here is the code,
         IF NOT sy-batch IS INITIAL.
    *program termination
            MESSAGE a203(z3) WITH s_vari-low text-025.
          ENDIF.
        ENDIF
    Before to this code i am calling ALV GRID...
    If i run in background Its creating a spool.  But, after termination deleting the spool. 
    How can i make changes that the spool should not delete in batch job.
    Thanks & Regards
    GR

Maybe you are looking for