Re: SAPlicense installation problem on NW04/WAS640/Linux
Hi Friends,
I have installed NW04/linux test drive on fedora linux. After that I try to install saplicense under user nw4adm. But I get following error:
SAPLICENSE (Release 640) ERROR *** ERROR: Can not set DbSl trace function DETAILS: DbSlControl(DBSL_CMD_IMP_FUNS_SET) failed with return code 20 RC-INFO: error loading dynamic db-library - check environment for: dbms_type = <db-type> (e.g. ora) DIR_LIBRARY = <path to db-dll> (e.g. /usr/sap/SID/SYS/exe/run)
any help would be highly appreciated
Thanks,
Krishna
Hi Krishna,
After the installation of SAP Netweacer Testdrive on Linux, we need to Get the hardware key by executing the following line:
$ /usr/sap/NW4/SYS/exe/run/saplicense -get
Once we done this, Request the license key for your TestDrive by entering your data at this site
http://www50.sap.com/linux/eval/nw4/
Shortly you will receive an email which you mentioned in the site with attached rpm file .
Note to install the RPM license MaxDB must be running.
Once you start the server with comnmand "startsap nw4host".
after this check whether all the processes started properly with the following command
"startsap check nw4host"
Hope this will be useful.
Regards
Kishore Ch
Similar Messages
-
Yast installation problem on Oracle Enterprise Linux Rel 5 Upd 2
Hi,
I installed Oracle Enterprise Linux Rel 5 Upd 2 on a new server (Intel 64 bit) with the downloads from oracle
(Enterprise-R5-U2-Server-x86_64-disc1.iso till Enterprise-R5-U2-Server-x86_64-disc6.iso).
Then I wanted to install Yast for administering my machine and downloaded yast_el5_x86_64.tar, again from Oracle. Running the Yast install routine it required the perl-Digest-SHA package. I downloaded that from Oracle ULN and installed it.
Now, running the Yast install routine again, I get a bunch of warnings and errors about failed dependencies and NOKEY's.
Here I copied a part of it:
warning: liby2util-2.13.8-0.12.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: blocxx-1.0.0-17.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: libxcrypt-2.4-12.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: testutf8-1.0-1.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: yast2-core-2.13.39-0.3.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: hwinfo-13.57-2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: yast2-hardware-detection-2.13.7-0.9.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: libzypp-2.15.10-0.4.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies
+ libboost_filesystem.so.2()(64bit) is needed by libzypp-2.15.10-0.4.x86_64+
+ libboost_regex.so.2()(64bit) is needed by libzypp-2.15.10-0.4.x86_64+
warning: yast2-pkg-bindings-2.13.117-0.13.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies:
+ libzypp >= 2.4.0 is needed by yast2-pkg-bindings-2.13.117-0.13.x86_64+
+ libzypp.so.215()(64bit) is needed by yast2-pkg-bindings-2.13.117-0.13.x86_64+
warning: yast2-2.13.104-1.0.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies:
+ yast2-pkg-bindings >= 2.13.111 is needed by yast2-2.13.104-1.0.x86_64+
warning: yast2-network-2.13.98-0.7.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies:
+ yast2 >= 2.13.90 is needed by yast2-network-2.13.98-0.7.x86_64+
warning: perl-Parse-RecDescent-1.80-259.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: perl-gettext-1.05-13.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: perl-X500-DN-0.28-133.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: yast2-pam-2.13.5-0.11.noarch.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies:
+ yast2 is needed by yast2-pam-2.13.5-0.11.noarch+
warning: yast2-mail-aliases-2.13.8-0.11.noarch.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies:
+ libzypp.so.215()(64bit) is needed by yast2-perl-bindings-2.13.11-0.17.x86_64+
+ yast2 is needed by yast2-security-2.13.7-0.11.noarch+
+ yast2-pam is needed by yast2-security-2.13.7-0.11.noarch+
+ yast2 is needed by yast2-ldap-client-2.13.27-0.11.noarch+
+ yast2-network is needed by yast2-ldap-client-2.13.27-0.11.noarch+
+ yast2-pam >= 2.13.5 is needed by yast2-ldap-client-2.13.27-0.11.noarch+
+ yast2 >= 2.13.70 is needed by yast2-country-2.13.52-0.9.x86_64+
+ yast2 >= 2.13.85 is needed by yast2-installation-2.13.192-0.4.noarch+
+ yast2-network is needed by yast2-installation-2.13.192-0.4.noarch+
+ yast2-pkg-bindings >= 2.13.101 is needed by yast2-installation-2.13.192-0.4.noarch+
+ yast2 is needed by yast2-users-2.13.55-0.4.x86_64+
+ yast2-pam is needed by yast2-users-2.13.55-0.4.x86_64+
What's wrong here and what is to do?
I only installed packages from Oracle on a newly installed machine. And I didn't find documentation regarding these problems.
Any help would be greatly appreciated,
Rogererror: Failed dependencies
+ libboost_filesystem.so.2()(64bit) is needed by libzypp-2.15.10-0.4.x86_64+
+ libboost_regex.so.2()(64bit) is needed by libzypp-2.15.10-0.4.x86_64+As error message clearly states you need to install additional OS packages (included in installation media or in online repository) to solve the dependencies. -
Installation Problem: "500 null" on Linux
We're setting up a new server (CentOS v4.3 fully updated,
Kernel 2.6.9-34.0.1) along with Plesk v8.0, ColdFusion MX v 7.0.1
(no additional patches). I have installed two compatibility
libraries (xorg-x11-deprecated-libs and compat-libstdc++-296). I
know there is a bug ("An error has occurred when reading/writing
/lib/license.properties"). This is not our issue.
The problem is that at each attempt to start Coldufusion,
that it presents a bunch of erros in the log, and displays only
"500 Null" in the browser window when I attempt to access the
admin. Attemtping to access a regular script simply outputs the
script text.
The precise installation instructions I've followed (over and
over) are
Here.
I've attached a synopsis of the log (and changed the server name to
"example.com" for search engine's sake. The installation logs that
everything is successful with the exception of required libraries,
and we've installed the necessary compat libraries.
I've been stumped on this for about 20 days. Can someone
suggest some avenues of exploration, keywords, little know facts or
magic incantations?
Unable get IP addresses from a local host, defaulting to
"127.0.0.1".
06/05 13:29:52 warning Unable to open
/opt/coldfusionmx7/runtime/lib/license.properties
I don't think this is an issue
06/05 13:29:54 info Fail to lookup ClusterManager instance.
06/05 13:29:54 error RuntimeException thrown in operation
start
[1]java.lang.NullPointerException
This came up 4 times
06/05 13:29:54 error led.example.com: led.example.com
java.net.UnknownHostException: led.example.com:
led.example.com
This came up 2 or 3 times,
06/05 13:29:54 info No JDBC data sources have been configured
for this server (see jrun-resources.xml)
06/05 13:29:54 info Fail to lookup ClusterManager instance.
06/05 13:29:54 error RuntimeException thrown in operation
start
[1]java.lang.NullPointerException
06/05 13:29:55 info JRun Web Server listening on *:8500
Server coldfusion ready (startup time: 4 seconds)
06/05 13:32:44 error There is no web application configured
to service your request
06/05 13:32:44 error No mapping found for
/CFIDE/administrator/index.cfm
06/05 13:32:44 user jrun.servlet.NotFoundServlet: init
06/05 13:32:44 error
java.lang.NullPointerExceptionUpdate: The only version of Java that we have is the one that
CF installed. Now, we're not running it with the Apache config,
we're running it as standalone. The reason we chose standalone vs.
Apache config is because we are using Plesk, an admin and user PHP
control panel, and it's instructions say that we should use the
standalone version. Plesk is touchy, so we're always quite wary of
doing anything to break it.
Can someone from Adobe (the former Macromedia team) chime in?
It would help to have someone who is really savvy about this
too. -
J2sdk installation problem on 64 bit linux machine
Hi
when i install the j2sdk then it gives the following error.:
/j2sdk-1_4_2_13-linux-ia64.bin: line 425: ./install.sfx.8624: cannot
execute binary file
PLEASE SUGGEST ANY SOLUTION
Thanks
devIA64 is the Itanium architecture. You probably don't have such a machine (if you did, you'd definitely know it).
If indeed you are running Linux on a 64bit machine chances are pretty high, that you are using a processor that's running the the AMD64 architecture (also called EM64T, x86-64, IA32e, ...). AFAIK only 1.5 is available for that architecture. -
Installation Problems Oracle Portal3.0 Linux 8.1.6
The installation finshed with Errors:
SSO Hast
WWSEC_Enabler_Config_Info
Now I can start the welcome Page of Portal.
But if i try to logon, i get the following error message:
You cannot login because there is no configuration information stored in the enabler configuration table. (WWC-41439)
nullDid you try some of these solutions?: http://otn.oracle.com/products/iportal/htdocs/portal_troubleshooting.htm#_Logging_in_to
-
Installation problem on Linux Slackware 7.1 (Oracle 8i)
I try install Oracle 8i Enterprise in Linux Slackware 7.1 (kernel 2.2.16), but the runInstaller don't work.
I read the installation manuals and make all steps, but the runInstaller don't work.
I get this message:
./runInstaller
The Java RunTime Environment was not found at bin/jre. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.1.8 or higher and try again.
: No such file or directory
I try --> ln -s /usr/local/jre118_v3 /usr/local/java
and --> ln -s /usr/local/jre118_v3 /usr/local/jre
and put in PATH --> /usr/local/jre/bin
Nothing work's.
Somebody can help me ?????
Thank's ....Hello!
I also tried to install Oracle 8.1.6.1 (after giving up the 8.0.5 installation due to segmentation faults all over..), it also failed.
After trying to install Oracle 8.1.6.1 on RedHat 7.0 and it still crashed, i sent a mail to some guru that wrote the oracle-how-to document for redhat, here is what he replied.
My guess is that this also applies to the newest slackware version, because i presume that slackware 7.0 also use the newest glibc libraries;
Thanks for the feedback.
Oracle 8.1.6 does not work under Red Hat >Linux 7. Yes, that's the problem
that I mentioned in the doc--you get to 80% >and the DBCA crashes and the
Oracle executables die.
I've heard, but I haven't tried it myself, >that if you install the latest
glibc errata (2.1.94) then the DBCA >completes but the Oracle executables
still die. The DBCA problem was apparently >a Java issue that is fixed in
the errata. But you're still out of luck >since the exes won't work.
It might appear that this is a problem with >Red Hat Linux 7. But it appears
that it is a problem with some assumptions >that Oracle made, assumptions
that worked with glibc 2.1.3 (the C library >included with RHL 6.2) but which
prove false with later glibc versions. As >other Linux distributions adopt
the new glibc Oracle will fail to work on >them as well.
The best advice I can give at this point is >to install and run Oracle on
Red Hat Linux 6.2. Hopefully Oracle will >address the glibc issues with the
8.1.7 release.
ChrisI then installed Orace on RedHat 6.1 and it worked like a dream.
Maybe you guys should try your luck on an earier version of slackware?
Hope that helped...
null -
Installation problem oracle 11g R2 on oracle enterprise linux 5 update 5
hello support,
i've installation problems with oracle 11g R2 on oracle enterprise linux 5 update 5. In the section "ORACLE Net-Konfigurationsassisten" the failure "[INS-20802] Oracle NET-Konfigurationsassistent not success". What's wrong? I've followed the instructions on http://www.oracle.com/technology/pub/articles/smiley-11gr1-install.html
I've heard the problem can occur with problems in /etc/hosts? My /etc/hosts is configured:
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 oracle localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
is this ok? what can I do to bring the database-installation to success?
Thank's for help ;-)
Edited by: user5782904 on 09.05.2010 14:06Here I paste you the configuration of my latest linux box which has a similar environment like yours.
# hostname
vmrhel6032.quist.ch
# domainname
(none)
# cat /etc/hosts
192.168.1.205 vmrhel6032 vmrhel6032.quist.ch
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
# cat /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=vmrhel6032.quist.ch
# cat /etc/sysconfig/network-scripts/ifcfg-eth0
# Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
DEVICE=eth0
HWADDR=00:0C:29:6A:98:70
ONBOOT=yes
NETWORK=192.168.1.0
NETMASK=255.255.255.0
IPADDR=192.168.1.205
#Thanks to your post I noted that the hostname consist already of my domain entry. Try your configuration first without domain entry. It should look like:
# hostname
vmrhel6032
# domainname
(none)
# cat /etc/hosts
192.168.1.205 vmrhel6032
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
# cat /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=vmrhel6032
# cat /etc/sysconfig/network-scripts/ifcfg-eth0
# Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
DEVICE=eth0
HWADDR=00:0C:29:6A:98:70
ONBOOT=yes
NETWORK=192.168.1.0
NETMASK=255.255.255.0
IPADDR=192.168.1.205
#Otherwise use the first example and don't forget to restart your server resp. the network service. ;) -
Installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system
We are having installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system.
Using interface, when installation come up to “Installing Wizard” window where Gateway Name Server Configuration window should take place, everything just freeze up
Using console, after installation we obtain following errors:
Installing Siebel Enterprise Server. Please wait...
unable to launch: "ksh export
LD_LIBRARY_PATH=/siebel/gtwysrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/gtwysrvr/bin/setup.jar run -args LANG=ENU
MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm" error code:
"236"(SBL-STJ-00152)
LD_LIBRARY_PATH=/siebel/siebsrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/siebsrvr/bin/setup.jar run -args LANG=ENU
REPEAT=FALSE MODE=LIVE MODEL_FILE=/siebel/siebsrvr/admin/siebel_server.scm"
error code: "236"(SBL-STJ-00152)
LD_LIBRARY_PATH=/siebel/siebsrvr/mgmtagent/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/siebsrvr/mgmtagent/bin/setup.jar run -args
LANG=ENU MODE=LIVE
MODEL_FILE=/siebel/siebsrvr/mgmtagent/admin/mgmtagent_ses.scm" error code:
"236"(SBL-STJ-00152)
Running command :
./ssincfgw -is:javaconsole -console -args LANG=ENU MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm
Infinite loop of following error pops out:
An error occurred during wizard bean change notification:
java.lang.NoClassDefFoundError
at ConfigInitialize.execute(ConfigInitialize.java:21)
at com.installshield.wizard.StandardWizardListener.execute(StandardWizardListener.java:123)
Is there any clue how this error can be solved??
Thanks in advance!!
Gordon
Message was edited by:
user605023I'm facing the same error message while install Siebel 8.0 on OEL. But before I had this ksh problem, it complains about disc space first, and I actually has plenty of disk space under the directory (it needs only 0.7 G and I have 17G free). Anybody has encountered such problem before?
/net/sdcnas05/vol/engfs01/v_sia/8.0SIA[20405|http://forums.oracle.com/forums/]/Release/Linux/Server/Siebel_Enterprise_Server
-bash-3.00$ ./setuplinux -is:javaconsole -console
Initializing InstallShield Wizard........
Initializing InstallShield Wizard........
Launching InstallShield Wizard........
0% 25% 50% 75% 100%
Welcome to the InstallShield Wizard for Siebel Enterprise Server
The InstallShield Wizard will install Siebel Enterprise Server on your
computer.
To continue, choose Next.
Siebel Enterprise Server
Siebel Systems
Press 1 for Next, 3 to Cancel or 4 to Redisplay [1]
Siebel Enterprise Server Install Location
Please specify a directory or press Enter to accept the default directory.
Directory Name: [siebel] /slot/ems1115/appmgr/20405
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Please select the products you wish to install.
[ ] 1 - Gateway Name Server
[ ] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]: 1
[X] 1 - Gateway Name Server
[ ] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]: 2
[X] 1 - Gateway Name Server
[X] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]:
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Configuring uninstallers. Please wait...
0% 25% 50% 75% 100%
Choose the setup type that best suits your needs.
[X] 1 - Typical
[ ] 2 - Compact
[ ] 3 - Custom
To select an item enter its number, or 0 when you are finished: [0]
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Please select the languages you wish to install.
[X] 1 - enu - English (American)
[ ] 2 - fin - Finnish
[ ] 3 - kor - Korean
[ ] 4 - cht - Chinese (Traditional)
[ ] 5 - ita - Italian (Standard)
[ ] 6 - esn - Spanish (Modern)
[ ] 7 - deu - German (Standard)
[ ] 8 - chs - Chinese (Simplified)
[ ] 9 - tha - Thai
[ ] 10 - dan - Danish
[ ] 11 - heb - Hebrew
[ ] 12 - fra - French (Standard)
[ ] 13 - nld - Dutch (Standard)
[ ] 14 - ptb - Portuguese (Brazilian)
[ ] 15 - csy - Czech
[ ] 16 - jpn - Japanese
[ ] 17 - ptg - Portuguese (Standard)
[ ] 18 - ara - Arabic (Sa`udi)
[ ] 19 - sve - Swedish
To select an item enter its number, or 0 when you are finished: [0]
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
{color:#ff0000}*Drive "/slot/ems1115/appmgr/20405" does not have enough space to install the*
selected configuration. Please free up "766446" KB on drive
*"/slot/ems1115/appmgr/20405" before continuing.*{color}
-bash-3.00$ pwd
/slot/ems1115/appmgr/20405
-bash-3.00$ df -h .
Filesystem Size Used Avail Use% Mounted on
sdc1002nap-vlan1:/vol/ems_39426_1115
71G 55G 17G 77% /slot/ems1115 -
Linux installation problem on D20
Hi, guys,
I am trying to install Redhat Linux x86_64 5.3 on D20 with a Marvell 88SE63xx/64xx SAS controller. As the Linux installer cannot recognize the SAS controller, I download a driver of Marvell mv64xx for Redhat x86_64 5.2 from Lenovo driver matrix website. Unfortunately, no matter how I follow the instruction to load the driver, the so-called mv64xx doesn't drive the Marvel 88SE63xx/64xx SAS controller in D20, so that the Redhat 5.3 Linux installer cannot find any hard drive. This is ridiculous and ironic because I got 5 SAS 15rpm hard drives in D20. Does anyone know how to resolve this problem and get Redhat Linux 5.3 installed on D20 with SAS drives?
Solved!
Go to Solution.hello, good news everyone
today i tested the upcoming kernel 2.6.31-1 with ubuntu server x64 (9.10 / karmic)
and what can i say?
[ 2.536365] mvsas 0000:01:00.0: mvsas: driver version 0.8.2
[ 2.536374] mvsas 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.536379] mvsas 0000:01:00.0: setting latency timer to 64
[ 2.537283] mvsas 0000:01:00.0: mvsas: PCI-E x4, Bandwidth Usage: 2.5 Gbps
[ 7.769579] scsi7 : mvsas
[ 7.769954] /build/buildd/linux-2.6.31/drivers/scsi/mvsas/mv_sas.c 380hy 2 byte dmaded.
[ 7.770674] /build/buildd/linux-2.6.31/drivers/scsi/mvsas/mv_sas.c 1365:found dev[0:5] is gone.
[ 7.778539] ata7.00: ATA-7: WDC WD5000AAKS-00TMA0, 12.01C01, max UDMA/133
[ 7.778543] ata7.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 7.779378] ata7.00: configured for UDMA/133
[ 7.779426] scsi 7:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
the kernel included the mvsas module and its dependant, and ran out of the box doing anything. and yes, it's a software raid, the bios offers raid 5 and 10, but they are greyed out. okay, my graphic is now broken with 2.6.31-1, but hey, the 5 port's are working i almost forgot where i have put the 500gb disk. hdparm -tT showed 7.8gb/s buffered and 77mb/s normal read, which is normal for the drive.
because of the nature of a module, i believe you have to compile a kernel with support of mvsas on your own to boot linux from it, or you use the ich10 - only for optical drives - sata port, which works fine with the intel x25-m ssd.
Message Edited by docc on 07-02-2009 12:06 AM -
Installation problem in Linux Slackware 7.1
So that we may better diagnose DOWNLOAD problems, please provide the following information.
- Server name
- Filename
- Date/Time
- Browser + Version
- O/S + Version
- Error Msg
I try install Oracle 8i Enterprise in Linux Slackware 7.1 (kernel 2.2.16), but the runInstaller don't work.
I read the installation manuals and make all steps, but the runInstaller don't work.
I get this message:
./runInstaller
The Java RunTime Environment was not found at bin/jre. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.1.8 or higher and try again.
: No such file or directory
I try --> ln -s /usr/local/jre118_v3 /usr/local/java
and --> ln -s /usr/local/jre118_v3 /usr/local/jre
Nothing work's.
Somebody can help me ?????
Thank's ....Hello!
I also tried to install Oracle 8.1.6.1 (after giving up the 8.0.5 installation due to segmentation faults all over..), it also failed.
After trying to install Oracle 8.1.6.1 on RedHat 7.0 and it still crashed, i sent a mail to some guru that wrote the oracle-how-to document for redhat, here is what he replied.
My guess is that this also applies to the newest slackware version, because i presume that slackware 7.0 also use the newest glibc libraries;
Thanks for the feedback.
Oracle 8.1.6 does not work under Red Hat >Linux 7. Yes, that's the problem
that I mentioned in the doc--you get to 80% >and the DBCA crashes and the
Oracle executables die.
I've heard, but I haven't tried it myself, >that if you install the latest
glibc errata (2.1.94) then the DBCA >completes but the Oracle executables
still die. The DBCA problem was apparently >a Java issue that is fixed in
the errata. But you're still out of luck >since the exes won't work.
It might appear that this is a problem with >Red Hat Linux 7. But it appears
that it is a problem with some assumptions >that Oracle made, assumptions
that worked with glibc 2.1.3 (the C library >included with RHL 6.2) but which
prove false with later glibc versions. As >other Linux distributions adopt
the new glibc Oracle will fail to work on >them as well.
The best advice I can give at this point is >to install and run Oracle on
Red Hat Linux 6.2. Hopefully Oracle will >address the glibc issues with the
8.1.7 release.
ChrisI then installed Orace on RedHat 6.1 and it worked like a dream.
Maybe you guys should try your luck on an earier version of slackware?
Hope that helped...
null -
Installation problem on SUSE 12.1
Hi
I'm a Linux beginner and I am trying to install LV on SUSE 12.1
I've also posted my problems on Lava:
http://lavag.org/topic/15240-labview-installation-problem-on-suse-121/
The installation started and it looks quite all right, but when I try to start LabVIEW, the application just sits in the taskbar for about 20 seconds and then just disappears.
Any ideas?
Is there a way to debug to see what's going on?
Cheers,
Mike
Solved!
Go to Solution.Hi Mike,
Unfortunately, there are no versions of LabVIEW supported on SUSE 12.1 at present. Here's a link to LabVIEW version compatibility with different Linux distributions. I saw from your other forum that you're attempting to install LabVIEW 2009, which is certified for SUSE 11.0 at the latest.
Best,
Dan N
Applications Engineer
National Instruments -
Installation Problems on Windows XP
I am trying to install Adobe Flex Builder 3 on a Windows XP
machine with service pack 2. I have downloaded it from the Adobe
Website. When I run the installer file it initializes till 100%
then it asks me to choose another location. I have tried installing
it in the following location. C:\Program Files\Adobe. I have also
tried to change the location to D:\
The following is my system Configuration
1 GB of RAM
40 GB Hard disk with enough free space to install Flex
Can anyone help me in this?Sorry different installation software is only for linux -
forgot about that.
Does your pc have any problems with other installations?
Also have you re-downloaded the file via a different method
(different browser - firefox maybe or downloadmanager)
But tbh it sounds like your installation manager - more
specifically the destination address for the install process is a
bit messed up - only way I can think to fix this is to re-download
the installer package
http://www.microsoft.com/downloadS/details.aspx?familyid=5A58B56F-60B6-4412-95B9-54D056D6F 9F4&displaylang=en
(i think thats it..)
Or try a windows repair or re-download the flex builder via
different method.
One last thing I can suggest (probably try this first) is to
restart and install in safe-mode (F8 key on start up I think in
XP).
Let me know how it goes - good luck! -
XI installation - problem when running sapinst.exe
hai,
when i'am running sapinst.exe file i'am getting the following error -
SAPinst is getting started.
Please be patient ...
guiengine: call to bind() for socket 1832 failed. No such file or directory
ERROR 2007-02-28 14:50:20 [iaxxgenimp.cpp:532]
init()
FGE-00006 Attempt to open a communication port connection failed. Check whether the port 21212 is already in use.
ERROR 2007-02-28 14:50:20
FCO-00034 An error occurred during the installation. Problem: error in GUI server subsystem.
Exit status of child: 1
can anyone help?
bye
nandanaHi Nandana,
Please check this link...
Re: problems installing NW04 sneak preview (java)
it talks about the same problem as yours...
Thanks.
btw...i got the link from google
Message was edited by:
Renjith Andrews -
I have tried to install Solaris 8 on my Dell machine.
I have tried to boot both directly via CD and by using Device Configuration Assistant on a floppy..
The first screen says this....
SunOS Secondary Boot version 3.00
WARNING: ACPI Tables not in Reclaim Memory
prom_panic: kmem_free block already free
Entering boot debugger:
[130ee5]:
and when i hit enter and choose c (continue execution), the m/c hangs and asks me to push ctrl-alt-del to reboot..
I don't know what the ACPI tables are .. and how i can fix this...
Anyone who knows this... please help..
Thanx a lot..I have heard about the ACPI that may be a Power Managemnet Tools or something, it always be found in Microsoft Window 2000 Device Manager, sorry I can't help you to solve the problems.....because I also have some installation problem on my Intel paltform @_@.
-
Installation Problem on iTunes 6.0.1.3 - HpSdpAppCoreApp
Help!
I'm trying to install the new iTunes 6.0 and I'm getting a message during installation that says
HpSdpAppCoreApp
"The feature you are trying to use in on a network resource that is unavailable.
Click OK to try again, or enter an alternative pathway to a folder containing the installation package "HpSdpAppCoreApp.msi" in the box below."
The last time I dug through some files on my own, bad things happened.
Thanks,
Cgood gracious, Chris ...
okay, try applying the general advice on installation problems given here:
http://docs.info.apple.com/article.html?artnum=93976
... and the InstallShield Tips and Pointers are also helpful with these less-well-documented errors:
http://consumer.installshield.com/faq.asp#ts
keep us posted.
love, b
Maybe you are looking for
-
How can i change the label of an array controller in the xib file
I have seven instances of NSArrayController in my main xib file; they are all labled 'Array Controller' and I cannot change the label in the list of objects. I can change the label in the identity inspector, but the label still remains 'Array Contro
-
Hi all, With the Base license, a Cisco Secure ACS 5.6 appliance or software virtual machine can support the deployment of up to 500 network access devices (NADs) such as routers and switches. These are not authentication, authorization, and accountin
-
Problem with RHALEINI - SAP HR Distribution
Dear All; we are using program RHALEINI to distribute the Employee data from HR System to our EBP System. Some times we have some employee missed out or approver data missing. Any pointers to how and where the program picks up approver data and why
-
Saved Docs Not Showing up via iWork
If I save a document from Pages on my iPad to "iCloud", it immediately turns up via iWork.com in Safari. If I try the same thing from Pages on my Mac it does NOT appear via iWork.com in Safari. My bookmarks and notes are syncing successfully between
-
Lenovo PM Driver for X130e AMD needs work for Windows 8 RTM
I tried doing the battery rundown test in the Windows Assessment Console in the new Assessment and Deployment Kit and the system tries to sleep, but the screen backlight stays lit and the system doesn't actually go to sleep. It also won't wake up pr