Re: Satelite L850-13R - HDMI is not working

I have been using my HDMI cable to connect Laptop and TV very rare. It was just fine. Yesterday I used it and it worked, then I have turned it again today and it is not working anymore. What could I do to make it working again?

That means that there is no signal to tv. Nothing happens when I press fn+f5. I have tried a lot of different things, such as reinstalling my video card drivers. Nothing works. My laptop seems to be able to see my computer when I press detect, but tv says that there is no signal and that there is no cable plugged in to tv...

Similar Messages

  • Hdmi does not work since updating to jelly bean

    Since updating my at305-16 to JB hdmi will not work . I go into settings and select hdmi out but get no signal on tv.

    I think it might be a JB driver issue. I was having the same problem connecting it to my LCD, but when I switched to my plasma it works. The LCD is 1080P Auto the plasma is 720P auto. But fropping my LCD to 7120P didn't help. I don;t know if you have two TVs to try on, but it couldn't hurt.

  • My hdmi adapter not working anymore, no physical damage. Solution?

    My hdmi adapter not working anymore, no physical damage. Solution?
    Strange is, that i used it several times, it worked fine. Then wothout any reason (like software updete, etc) it just stopped workung, no sync.
    I have not changed any parameters of my TV or Beamer.
    Hardware:
    Ipad 2, Apple Ipad HDMI Adapter,  Samsung P2770FH, Optoma HD 65.
    Thanks for any help.

    I've only used mine a couple of times without any problem, but due to the thinness of the iPad, care has to be taken in inserting the adapter.  Slightly wrong angle and it won't go it. 
    I had a laptop a few years ago where the USB connector failed. I had it replaced under the warantee,  The service man told me it was not an uncommom failure on a laptop due to people "torquing" the USB socket while inserting/removing USB items.  I have much the same feeling when inserting either the charger cord or my HDMI adapter.
    From your description, unless the HDMI adapter failed internally, it sounds like the socket is causing the problem.  A few days ago we watch our first movie from the iPad via my ATV2 and "Air Play".  Worked great so I don't plan on using the HDMI adapter much at all in the future.  Yes, it is a $99 solution, but it works for me.  Of course, I already had the ATV2.  I doubt if I would buy one just for this abiliity.  If nothing else, it seems like a trip to the Apple Genius bar is in order for maybe a replacement unit.
    However, with iOS 5 coming out with supposedly total mirroring, it might be worth thinking about getting an ATV2.

  • HDMI Output not work on Encore Tablet

    Hi guys,
    First post and a new user of the Toshiba Encore.
    Some background - I had a faulty Encore previously, but it would connect to my HDMI screen. The replacement, now 3 weeks old, works perfectly, except yesterday I tried HDMI out for sound (to an HDMI amplifier) but nothing. And then I decided to see if it would do HDMI out video - and nothing.
    I plugged in the same cable that worked on the faulty tablet and to the same screen. I hit the devices charm and duplicated (and even tried extending) the screen. Nothing. I tried both HDMI ports on the screen. Nothing.
    The last (faulty) tablet would make the sound that a new device was installed when I plugged HDMI in. This one makes no sounds. It's like the HDMI port isn't connected at all.
    What advice would you give? I have downloaded all BIOS and Windows updates. I used the Intel update tool and everything is current. So what could I try to troubleshoot to get this to go?
    Will happily provide more info if needed.
    Cheers

    This HDMI connection still does not work. It only shows on the TV not on both. I have spoken to Toshiba Software and they have a fix which are some special tools at a one off charge of £84. They say the problem is to do with the HDMI only sending at 30 Hz and the TV being at 60Hz. They also say the fix will provide mirroring as the resolution of the TV and Encore are not compatible. As I only paid £177 for Encore I am reluctant to pay such a high amount. They also advised that you must be connected with the mains adaptor because the battery is not powerful enough to sustain the signal. My laptop works fine and I have a new HDMI cable for Encore.
    Any further thoughts? 

  • Lightning HDMI Adapter not working with iOS 6.1.2

    I have an iPhone 5 which was updated from 6.0.2 to 6.1.2 recently and the Lightning HDMI adapter stopped working altogether for video mirroring; was wondering if anyone has the same situation/any solution for this?
    I also have an iPad retina generation which is at 6.1.2, and the Lightning HDMI adapter is not working for it as well.
    I've tried replacing HDMI cables, rebooting the iPhone with the cable plugged in, and plugging out/in several times with the charger in/out. The adapter works, cause when I plug it in; I see the top bar flash for a bit... but no dice on the video mirroring to my TV.

    I also have this problem and am very unhappy with the way Apple is handling it. Called today to enquire on when the fix will be available and was told it is a software issue that could be fixed if we paid $35.00 to talked through process on the phone. Highly disappointed with Apple, why should it cost me money for them to fix there own issue. Since they are aware of the issue the least they can do it posted the information for the fix online @ no charge.
    If I wanted crap service I could have gotten a phone from anyone. Reconsidering purchasing a 5 on next upgrade.

  • Hdmi port not working on HP Pavilion g7-2240us Notebook PC

    I can't get my HDMI port on my on HP Pavilion g7-2240us Notebook PC to work... Can someone please help me? (it's windows 8)

    This is ridiculous - the number of hits that come up for "Pavilion g7 HDMI not working" is astounding; yet finding a useful answer, or anything resembling a useful answer other than a document that instructs 4-yr olds on how to locate an HDMI port, is impossible.
    HAS ANYONE FOUND A SOLUTION TO THIS?  Or is this a rampant model-wide issue that HP would rather not acknowledge?

  • HDMI Audio not working on Q190 (along with all higher level Audio Formats)

    Help, I have been given the run around via support, I cannot get the HDMI audio to work with my Pioneer Surround Sound, only the Intel display audio shows in control panel (Win 8 X64) and the RealteK S/P Dif port and it is not capable of supporting 7.1 sound or bitstreaming or DTS, Dolby HD, Etc. Tec support appears not capable of fixing the issue and wanted to send me to software support and pay. I have only had the machine for 4 days and it has never supported higher level sound.
    Every other device I have (had or currently) connected to the receiver works just fine. I have to figure this out or return the machine, the audio is the most important aspect for me. Besides when you advertise 7.1 support the machine you sell should be able to do it.

    Hey guys,
    I have had this Q190 with the Celeron CPU since last week and I am using XBMC Frodo and the HDMI is connected to my AVR Onkyo TX-NR809 and from the Onkyo to the TV. And the sound is 7.1 with PLIIZ. It works fine. I think it may be some driver problem because Realtek Audio which is in the Q190 works fine with the Win8 preinstalled. Realtek is kind of bad with driver because I lost my wifi after upgrading to Win 8.1. After a few days with no wifi, I found out that the driver was bad, yes it was a Realtek wifi driver but posted by Lenovo for W 8.1.
    I have another friend who also just bought the Q190 and he reported no audio problem so I think it is just a matter of trouble shooting the drive and configuration. I do love the form factor of the Q190.

  • HDMI Port not working on Lenovo G460 Win7-64bit

    I've been trying to solve this for some months now.
    I bought my lenovo G460 with nvidia M310 (with hdmi) this year and have not been able to get the hdmi port to work.
    I have two lcd displays one in our lab and another one at home (LG 2361V-PF) which have hdmi connections in the back.
    In the beginning I was able to get my notebook to work on the display in our office. However, now both displays (work+home) are not working.
    I have tried to reinstall latest nvidia drivers as of 2010-11-02 (ver. 8.16.11.8990) from lenovo, completely restore Operating system and tried different hdmi cables.
    I have even tried to use original drivers and also downgrade that to a lower version all with no luck.
    I have even taken my LG LCD display to the LG After Service Warranty office and have found no issues wrong with the Monitor itself.
    I am sure I have taken all the trouble-shooting methods into consideration so a simple question is...
    Is the hdmi port defective?
    I will take my laptop into the Lenovo After Care service center this week, but before then is there anyone who has had this issue and solved it?  -->or is it just a hardware problem easily fixed with warranty replacement parts.
    Thank you
    Solved!
    Go to Solution.

    ::Update:: ----------> Partially SOLVED
    Lenovo After Service Center Report:
       1. hdmi connection is fine
    They said that it could be a software problem and that they would try to update the driver.
    Partial Solution:
    Use Lenovo Original Drivers, for some reason NVIDIA newest drivers conflict with hdmi port on Lenovo G460 .
    I restored my laptop to factory condition and tested the hdmi connection and it worked for a few seconds ...
    my lcd screen started to flicker and my laptop flickers now when hdmi is connected....(A sign that hdmi is not really broken)
    Will update solution when i get it to work 100%

  • Hdmi does not work

    I am trying to hook up a logitech revue unit to my hitachi hdtv.  It requires an hdmi input.  When we first got fios, (qip 6200 p2 stb), no amount of fiddling with cables, settings and what not got hdmi to work.  After much frustration, etc. said to hell with it and went with component output.  Worked fine.  Now I need hdmi.  TV keeps saying "no video signal. "  Tried all three hdmi tv ports and tried all tv input option settings.  No go. It did come on intermittently , but only after an un-acceptable delay.  Yes!  I did disconnect the component outputs before trying the HDMI.  have rebooted  and resetted the world to no avail.  According to the various forums,    this Motorola hdmi fiasco has been ongoing for almost three years.  I want a fix, ASAP.  Or at least a reliable date for a fix.  BTW I am an EE+ computer science engineer.  I've tried the entire customer service 101 stuff so please don't tell me to change my cables.
    Boris {edited for privacy}

    As I said in my posting, I am a professional.  I would not have bought the unit had I not seen the logitech listing of compatible STB.  Also, be assured that I have hooked it up correctly.  There does not appear to be any way to do it wrong.
    1.  STB hdmi OUT  to Revue hdmi  IN
    2. Revue HDMI OUT to TV HDMI IN   Tried all three ports.  NO Go.
    How pray tell could I have screwed that up?
    Read my post please. Went through the cable **bleep**
    Revue HDMI out to TV works okay I get a signal and can start the initialization procedure.  I have a wifi problem which
    I may fix by opting ethernet if high gain antenna does not fix.  As I said, I am a professional..i have read thoroughly the Actiontec (router), logitech  and Verizon Forums.  This STB misbehavior is endemic to to the benighted Motorola STB and has been endemic from the start.  Obviously, Logitec testing of the Motorola STB was inadequate.  My original question
    stands, since the MOtorola STB does not work on HDMI.  Please confine your reply to a substantive response to my question.
    1. When will the Verizon STB  be made to provide fully functional HDMI outputs.
    if not that,
    2. When will Verizon provide a fully functional STB?
    BorisBeizer
    MSEE ( Uof P 1963)  PhD Computer science (ditto, 1967).

  • HDMI output not working after Windows 8.1 update

    I am using an Envy TouchSmart 15 and I have just run an update of Windows 8.1 based on the system auto update (it ran 5 updates). Prior to the update, I used a 27" monitor as the main screen and this was connected via the HDMI port.  Right after the update, the system doesn't seem to recognise the HDMI port anymore and it goes back to using the Envy laptop screen as the main screen.  I changed the HDMI cable but it made no difference.  I subsequently connected another laptop to the 27" monitor via HDMI and it worked fine.  So it appears both the monitor and the HDMI cable are fine. Please can you help ? 

    Hey yawbus,
    I would first like to welcome you to the HP Forums!
    Thank you for sharing the troubleshooting steps that you have done already, and I will say you are correct that the issue is not with the HDMI Cable, or the 27" monitor. From what you have described in your post, it does sound as though the issue is with the drivers, possibly a conflict.
    I would like to start of with installing the original video drivers that came with your notebook. I have included the document 'Using Recovery Manager to Restore Software and Drivers (Windows 8)'. Please follow through the steps for just reinstalling the original video drivers. After the original drivers have been installed, please restart your computer.
    Now once the computer has restarted, you will need to install any updates that are available for both HP, and Windows. You can install both of these through the HP Support Assistant. I have included the document 'Using HP Support Assistant (Windows 8)'. Scroll down the page about halfway, and you should see an option for Updates and tune-ups. Please follow the options for HP updates, and Windows updates.
    If you are still experiencing the same issue after the above troubleshooting steps, please let me know the full model number of your Envy TouchSmart 15. I have included the document 'Guide to finding your product number'. As well, please confirm the current version of Windows that you are running. If you need assistance in finding the version, I have included the document 'Which Windows operating system am I running?'.
    Looking forward to your reply!

  • HDMI output not working with AT200 under ICS

    Hello
    The HDMI output of my tablet AT200 doesn't work with any TV set.
    My AT 200 tablet is under ICS.
    I tried both HDMI configurations : full screen and video window. No effect at all.
    I have red the post of denis48 and the response of MasterG and tried his propositions with no success
    Is there somebody to help me please ?

    Hi
    I think you meant this thread:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=67654
    The output should work as its described in the posting.
    If it does not work, reset the tablet settings and try again

  • HDMI output not working with AT 200 under ICS

    Hello,
    I connected the HDMI output to a Sony KDL 32 E 5500. It simply does not work.
    The same TV HDMI input works fine with a DVD player.
    The AT 200 tablet is under ICS (upgrade in France).
    I tried both HDMI configurations : full screen and video window.
    Should I send it back for repair ?

    Hi
    There are two outputs: Mirror and video area only.
    Mirror:
    External device copies the image on the tablet screen
    Video area only:
    The external display device shows the playback when open a multimedia
    But You should firstly check the Android Settings:
    Under the option Screen you will find the option HDMIO video mode
    Tap this to switch between the HDMI video output mode.
    You could also try to connect the HDMI device under following conditions:
    - Tablet is turned on
    - Tablet is completely turned off
    - when you connect TV or external monitor to HDMI port, then display output is set to HDMI
    - when you plug and replug the cable, wait at least 5 sec before you replug the HDMI cable.

  • HDMI output not working since firmware upgrade

    I would appreciate troubleshooting tips for getting the HDMI output to work. I just tried it recently for the first time in a long while, approximately 4 weeks after doing the firmware update to 2.2. When I did it before, plugging in the HDMI cable would automatically start output to my HD TV. Now that is no longer the case. Changing the HDMI output from "Auto" to "720p" does not make a difference either.
    Otherwise, everything works well and I've been satisfied with my Creative 7 to date. I have installed several apps so it could be that there is a conflict and nothing related to the firmware upgrade.
    Any troubleshooting suggestions would be appreciated.

    Well I've received my refurbished device for about a week now. The HDMI still doesn't work either with Zii Video or a 3rd party app MoboPlayer. ?I am tempted to reinstall the firmware upgrade again. Is it ok to try this or is it only a one time attempt?
    Perhaps this should be a separate thread but are any of the "Phone 2 SD" apps compatible with the Ziio 7? Whenever I use the "Move to SD card" option, there is still no program moved to the external SD card. ?I have a Ziio 7 with 6 GB of memory as well as a 6GB micro SD card. ?My memory settings are:
    - SD Card: total space - 5.43GB; Available space - 5.43GB
    - Device media storage: Total space - 2.48GB; Available Space - 2.3 GB
    - System storage: Total Space - .97 GB; Available space - .59GB
    In Settings>Applications>Manage Applications, the "On SD Card" tab lists several programs lists several apps but none of them are actually on the external SD card.

  • HT5012 Hdmi does not work on my iPad or iPhone since doing the update 7.0.2

    iPad and iPhone the hdmi out does not work have audio but no picture since I update to 7.0.1 or 7.0.2 is still does not work it did before

    Try resetting your wireless router by unplugging the router from the power for about 30 seconds then plugging it back in.

  • HDMI output not working on Compaq Presario CQ60-430sa

    Install the driver below....
    http://forums.laptopvideo2go.com/topic/25059-v18644-windows-7vista-64bit-nvidia/
    Any driver beyond this does not work with HMDI output.
    Worked for me after 3 months of trying anyway!

    When you press FN+F5 key combination while notebook is not connected with HDMI cable, you will see one option (LCD) only. When you connect HDMI cable can you see other additional options like LCD, LCD+HDMI, HDMI and so on?
    Please be also sure that right HDMI port on your TV is enabled.
    By the way: which OS do you use?

Maybe you are looking for