Re: Satellite A - Saving files after recovery?

Hi friends, I made a mistake.
I wanted to setup SP2 for Vista but I lost my all files. I did not understand it has not do this :( Recovery program formatted my second HDD partition.
So I am waiting your advices:(
thanks

Hi
If you run the Toshiba recovery disk it formats the whole HDD and so your second HDD partition too. In my opinion its normal and before you run recovery you should always backup your files.
Anyway, as Akuma said you should with Google to find a Data Recovery tool. I use PC Inspector File Recovery and it works really well. Furthermore its freeware program.
Bye

Similar Messages

  • Unable to restore backed up files after recovery

    I had to do a system recovery, and in the process backed up my files.  After recovery, I updated Microsoft and HP files, installed Norton 360, Office 2007, Outlook, and Nikon photo software.  I then tried to restore my backed up files.  Every time a User Account Control box pops ups and stating an unidentified program wants to access my computer.  I press allow, User account Control box goes away but nothing else happens.  Help!

    Hey asjhawk,
    If you go into the advance backup and restore function are the database on your device and on your backup the same size? 
    Also you can try this.
    Open the contact list.
    Press the Menu key, then click Filter.
    Clear the check box beside the category.
    Let us know how you make out.
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Saving files after PS

    When I send a file to Ps from Lr, edit that file then save it, Lr puts that file at the end of the line instead of next to the file I was working on.  When you have 600 photos in a down loud, it is a pain to scroll through the photo's to find your place again. 
    Is there a setting to force the saved file back in line next to the file that was edited in Ps?

    web-weaver wrote:
    Go >View >Sort and select <File name> then the file will be seen right next to the Raw file.
    You must've set your sort order to <Capture Time> and Lr reads the edit time of PS as capture time.
    More likely, either Added order, or Edited order - IMO.
    PS is unlikely to either alter, or strip off, the capture metadata. It is possible to omit this when using Save for Web, but IIRC not with a normal Save or Save As.
    The same capture details apply in my experience equally to the original, virtual copies and externally edited files derived from that.

  • How to obtain backup files after recovery

    how do i restore the back files after recovery

    Have you tried signing out of the existing iTunes account on the iPod and signing into yours? Also the same for the computer's account.

  • FrameMaker 10 Crashes when saving file after cut & paste

    FrameMaker consistantly crashes, everytime, when doing a save file after doing a cut and paste of table data from one open FrameMaker file to another. This only happens with a specific table. I have had this happen consistantly over the past year with various docs and table data. Usually it occurs when trying to cut & paste data that has edit tacking turned on, but in this instance this is not the case. FrameMaker is fully up to date. Running WINXP
    Internal Error 10024, 6379539, 6372417, 6385921, FrameMaker has detected a serious problem and must quit.

    > This only happens with a specific table.
    If you can isolate the trigger factor, that would enable two things:
    1. other FM users, some with Support, could confirm and re-report,
    2. Adobe would be able to find the root cause quicker.
    Is it a specific Table Catalog table, regardless of content, or
    specific table content regardless of table format?
    Possibly unrelated anecdote ... as I've mentioned, when we get Err7103
    crashes, it's often well after the real damage has already happened.
    We have seen cases where huge sections of a document appear to
    vanish. In at least one instance, the content did not disappear.
    It got moved into a table cell, and was largely invisible.
    I can imagine that hidden table structures of sufficient complexity,
    or sufficient degeneracy (e.g. unbalanced tags, garbage structs,
    containing cross-refs to self*), could make the document unstable.
    * When the size of the .fm file increases with every save (and no
    changes), circular cross-refs are a likely cause.

  • Satellite L450D-11G - Hangs after recovery installation

    The recovery disk supplied does not work. After installing all the files, it goes into a loop from booting up with "Installing Windows for the first time, through "Please wait", to flashing up the home screen then logging off and rebooting.
    Is there a fix for this?

    I can really laugh when I read something like this.
    Recovery procedure takes pretty long time with several restarts and it can take over one hour.
    So don't worry about useless laptop.
    Best thing you can do is to do something else until recovery installation will be finished.
    Watch TV, read a book and let recovery procedure be done completely.

  • Satellite M300: bootmgr missing after Recovery has failed

    I tried to reinstall Vista using Toshiba recovery disk... when i tried to do it took long time to copy files and then it asked for next disk.
    Even after inserting 2 disk it still asks for insert next disk... I had no choice and i cancelled it...
    When i booted again it said bootmgr missing
    'CTRL+ALT+DELETE' to restart
    I stuck up don't know what to do.
    pls tell me sme suggestions

    Hi
    The error bootmgr missing appears because the Recovery procedure hasnt finished and the old bootmgr was destroyed.
    It looks like your second DVD is not readable for no apparent reason.
    Maybe you could try to recover the notebook using the HDD recovery option.
    Maybe the partition was not damage during the recovery procedure from DVD.
    So press F8 after notebook was powered up. Choose first option called Repair my Computer. Choose last option Toshiba Recovery and try to recover the notebook from HDD.
    If it doesnt work then you could boot from the original Vista DVD and could try to repair the boot manager.
    In worst case you would have to reinstall the OS from the Microsoft Vista DVD or you will order a new Recovery DVD from Toshiba.
    Good luck

  • Satellite M70 - Black screen after recovery installation

    So far what I have done is put in the Product Recovery DVD-ROM. Then when restarting my computer I was prompted to restore my computer to the factory defaults and said. After it went through that process it told me to remove the disc so I did. Now all it does is reach a black screen after the Toshiba screen that gives me the options to f2 for setup and f12 for options.
    I do not know what to do now to make my laptop work again. Please help.

    Satellite M70 is old notebook model and I would like to know do you use recovery disc for the first time. I had Satellite M70-159 long time ago and have installed recovery image many times.
    Which installations mode you have used: standard mode or expert mode?
    Try to install it again.
    As Xardas wrote try to obtain Microsoft installation disc and check if everything works well.

  • T40 missing or corrupted \windows\system file after recovery process

    My T40 Thinkpad had a corrupt drive so I secured the recovery disks from IBM to rebuild the hard disk.  The recovery process seemed to work well, but when completed and prompted to remove all disks and reboot, the system booted and failed before Windows XP loaded with an error message that the windows\system file was corrupt or missing.  Any recommendations on how to succesfully recover?  Thanks.

    boot off the WinXP Disc and run a repair.  Did it mention the boot.ini file being corrupt, or something else?
    T61 15.4" T9300 (2.5GHz 6MB L2) Windows 7 Professional x64 4GB Memory, NVidia Quadro NVS 140M

  • Problem with the location of files when saving files after signiging them

    We have a application that calls acrobat writter to sign a pdf (some sign boxes not the all document), but when using the latest Acrobat it insists on saving the signed files to the previous open path used by acrobat and not to the current file location, saving the file on the wrong path, how can i fix this ?
    example
    acrobat.exe c:\myfile.pdf ...-> tries to save to d:\some_path_where_user_worked_previouly
    To me this is a bug, i open a file make a change and the aplication tries to save the file somewhere else ? this is most wierd and also this was not the way acrobat 8 worked....
    but i have yet to find a solution... also the same problem occures if i open the pdf file in windows explorer
    HELP PLEASE
    Miguel

    I Have found the aswer.
    Has i suspected it was a bug, i was being miss lead by a work collegue that reported that she run the updates and it didn't fix anything, but today she reported other wise.
    I have run the Adobe Acrobat 11.0.06 upgrade and all is fine
    Bug FIXED.
    Thanks any way
    Miguel

  • Mac using iPhoto with elements 9 saving file after editing

    I start with iPhoto select a photo to work with, make adjustment or add layer etc and then when I save the file I can never find it again!
    It says it is saving it to my iPhoto folder I started from but it is not there.
    Never had this kind of problem before. How can you direct Elements to save where you want it not where it wants it.
    Thanks
    LarryB

    Thanks for that info.
    I had it almost set up correctly did not know in Elements to set "save over original" feature so that solved it.
    I have no idea where these others I have modified went.
    I search for them in the spot light but the path doesn't get me there.
    It stops at iphoto library/modified etc.
    They are not in the library that's for sure.
    Anyway this method will work just fine.
    LarryB

  • Satellite C75 - Performace problems after recovery

    After I recovered my Satellite C75 back to factory settings (that took severala hours) I suffer from drastic performance problems. Games that were running with 50 fps now are having about 10fps.
    What might be the problem and what to do?

    Im quite sure. And dfference is huge. I thought that maybe thats something to do with updates, but nothing have changed.

  • Saving file after cropping

    I managed to figure out the weird new crop tool and cropped my image. Now I want to hit CMD-ALT-SHIFT-S in order to save for web, as I have done in ages past. When I do that, nothing happens.
    Prior to cropping, I was able to do this. What gives?

    If the grid is still there,then your command won't work. You can either try ESC, or switch to another tool and try the command again.
    Gene

  • Lost audio files after saving.

    I lost my audio files after saving in Logic X and now my project file has the extension .logicx on it and my audio files are nowhere to be seen. I made some changes to the project, moved the file to another folder, then they asked if I wanted to replace the other file with the new and I said yes not thinking that it would matter. Is there any way that my audio files are still out there somewhere? And no I don't have time machine hooked up.
    Thanks.

    if you replaced that file.. then you have lost it's contents as they have all been replaced with the one you copied over... and as you have no backups you cannot, as they say.. un-scramble the egg...
    Finally start making backups as soon as possible...
    As the old saying goes...
    "There are three things in life you can always count on.. Death.. Taxes...and you will need a backup of your computer data at some point"
    Nigel

  • Signature Scribble field not retaining image file after saving

    I have 2 issues with my PDF dynamic file I sent out
         1) The add/remove controls is adding a random amount of extra blank rows upon saving the PDF
         2) The image files selected for the Signature Scribble field is not retaining the image file after saving. It also doesn't give an opportunity to actually draw in a signature.
    I even tried to use the Subform Instance Controls Insert/Remove/Move in my table, but I keep receiving the error "You have reached the maximum number of items allowed"
    I would appreciate any help you can give me! I have been farting around with this for too long.
    Thanks!
    Rhonda

    Thanks Pat.  Tried each, restarted computer each time; tried the "Accept" routine several days ago - it worked briefly and then stopped.  Uninstalled Reader and Flash as well.  Strange thing with Flash, one of my online broker programs provides streaming of CNBC.  When I clicked on the CNBC option to initiate CNBC, I got a message saying that I needed to load Flash.  I did, and it loaded again with no mention of Flash having already been installed.
    Using Internet Explorer works, as well as, clicking on the .pdf file within Windows Explorer (WE).  Expanding the window in WE makes it large enough to read.  I would still like to find a way to open the files as they are designed to open.
    I have done all of the Adobe updates as they have been presented.  Microsoft updates load automatically, and restart my computer in the process.  I do not look to see what the updates have been.  I figure if there was not a need, Microsoft would not make the updates.
    [private data removed]

Maybe you are looking for